5681
MNF/BAFFLE/OFAJ
Ordnance Factory Ambajhari
The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021
5682
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
CUPPER SHEET 5X132MM SQR
Physical Verification needed
Description
CUPPER SHEET 5X132MM SQR
Specification
CUPPER SHEET 5X132MM SQR
Testing / Inspection Facility
70
496
Number
5683
OFM/PV/EOI/2019/10
Ordnance Factory Muradnagar
The General Manager,
Muradnagar
Muradnagar
Uttar Pradesh
201206
Name
Code
Quantity
Approx Value
Select
PIN TO DRG 613 44 058 T 72 L F NO 6230901105
Physical Verification needed
Description
PIN TO DRG 613.44.058 T-72
Specification
PIN TO DRG.NO.613.44.058,TECHNICAL REQUIREMENT AS PER SPEC. NO.OFM/TDS/TRACK-72/02
Drawing no.
DRG.NO.613.44.058
Manufacturing Technology
1. Cold drawing process line of adequate capacity to manufacture cold deformed hexagonal bar.
2. Suitable end finishing machine for carrying out cutting of cold deformed hexagonal bar to required length by cold machining.
3. Turning / thread rolling / thread forming machine. Hot Rolling.
Isothermal heat treatment line to achieve required mechanical properties as specified.
Shot Blasting
Facility of Zinc coating and Chromate passivation.
Facility for removal of Hydrogen Embrittlement.
Testing / Inspection Facility
Crack detection testing facility.
Bend removing (straightening) machine.
Bend test facility.
Mechanical, metallurgical and Chemical analysis testing facilities to test the required parameters as specified in specification no.OFM/TDS/TRACK-72/02.
62
97
Number
NUT TO DRG 613 44 071 T 72 L F NO 6230901106
Physical Verification needed
Description
NUT TO DRG 613.44.071 T-72
Specification
NUT TO DRG.NO.613.44.071,TECHNICAL REQUIREMENT AS PER SPEC. NO.OFM/TDS/TRACK-72/O3
Drawing no.
DRG.NO.613.44.071
Manufacturing Technology
1. Cold drawing process line of adequate capacity to manufacture cold deformed hexagonal bar.2. Suitable end finishing machine for sizing of cold deformed hexagonal bar to required length by cold machining. Hot Rolling. Suitable heat treatment line to achieve required mechanical properties as specified.
Facility of Zinc coating and Chromate passivation.
Testing / Inspection Facility
Crack detection testing facility.
Mechanical, metallurgical and Chemical analysis testing facilities to test the required parameters as specified in specification no.OFM/TDS/TRACK-72/03.
62
194
Number
RUBBERISING OF SHORT BUSHING L F NO 6230901116
Physical Verification needed
Description
RUBBERISING OF SHORT BUSHING
Specification
RUBBERISING OF SHORT BUSHING TO DRg.No.613.44.061, AS PER SPEC.No.OFM/TDS/TRACK-72/04 AND COMPLETE ASSEMBLY DRg.No.613.44.057 Cb.
Drawing no.
DRg.No.613.44.061,
Manufacturing Technology
1. Injection moulding machine.
Testing / Inspection Facility
1. Tensile strength testing facility.
2. Hardness testing facility.
3. Brittleness testing facility at low temperature.
4. Bonding strength test facility.
5. Service life (Endurance) test facilities.
6. Testing facilities as per specification no. OFM/TDS/TRACK-72/04.
62
194
Number
RUBBERISING OF MEDIUM BUSHING L F NO 6230901115
Physical Verification needed
Description
RUBBERISING OF MEDIUM BUSHING.
Specification
RUBBERISING OF MEDIUM BUSHING TO DRg.No.613.44.060,AS PER SPEC.No.OFM/TDS/TRACK-72/04 AND COMPLETE ASSMBLY- DRg.No.613.44.056 Cb.
Manufacturing Technology
1. Injection moulding machine.
Testing / Inspection Facility
1. Tensile strength testing facility.
2. Hardness testing facility.
3. Brittleness testing facility at low temperature.
4. Bonding strength test facility.
5. Service life (Endurance) test facilities.
6. Testing facilities as per specification no. OFM/TDS/TRACK-72/04.
62
291
Number
RUBBERISING OE LONG BUSHING L FNO 6230901114
Physical Verification needed
Description
RUBBERISING OE LONG BUSHING.
Specification
RUBBERISING OF LONG BUSHING TO DRg.No.613.44.059,AS PER SPEC.No.OFM/TDS/TRACK-72/04 AND COMPLETE ASSEMBLY DRg.No.613.44.055 Cb.
Drawing no.
DRg.No.613.44.059
Manufacturing Technology
1. Injection moulding machine.
Testing / Inspection Facility
1. Tensile strength testing facility.
2. Hardness testing facility.
3. Brittleness testing facility at low temperature.
4. Bonding strength test facility.
5. Service life (Endurance) test facilities.
6. Testing facilities as per specification no. OFM/TDS/TRACK-72/04.
62
194
Number
SHORT BUSHINGS FOR T 72 L F NO 6230901109
Physical Verification needed
Description
SHORT BUSHINGS FOR T-72
Specification
SHORT BUSHING TO DRG. NO.613.44.061, TECHNICAL REQUIREMENTS AS PER SPEC. NO. OFM/TDS/TRACK-72/01.
Manufacturing Technology
DRG. NO.613.44.061 1. Cold drawing process line of adequate capacity to manufacture cold deformed pipe with inner hexagonal profile.2. Heat treatment line to achieve required mechanical properties as specified.3. Suitable end finishing machine for carrying out cutting of cold deformed pipe with inner hexagonal profile to required length by cold machining. Hot Rolling.
Testing / Inspection Facility
Mechanical, metallurgical, chemical analysis and crack detection testing facilities to test the required parameters as specified in specification no. OFM/TDS/TRACK-72/01.
62
194
Number
MEDIUM BUSHING T 72 L F NO 6230901108
Physical Verification needed
Description
MEDIUM BUSHING T-72
Specification
MEDIUM BUSHING TO DRG. NO.613.44.060, TECHNICAL REQUIREMENTS AS PER SPEC. NO. OFM/TDS/TRACK-72/01.
Drawing no.
DRG. NO.613.44.060
Manufacturing Technology
1. Cold drawing process line of adequate capacity to manufacture cold deformed pipe with inner hexagonal profile.2. Heat treatment line to achieve required mechanical properties as specified. 3. Suitable end finishing machine for carrying out cutting of cold deformed pipe with inner hexagonal profile to required length by cold machining. Hot Rolling.
Testing / Inspection Facility
Mechanical, metallurgical, chemical analysis and crack detection testing facilities to test the required parameters as specified in specification no. OFM/TDS/TRACK-72/01.
62
291
Number
LONG BUSHING T 72 TRACK L F NO 6230901107
Physical Verification needed
Description
LONG BUSHING T-72 TRACK
Specification
LONG BUSHING TO DRG.NO.613.44.059,TECHNICAL REQUIREMENT AS PER SPEC.NO.OFM/TDS/TRACK-72/01.
Drawing no.
DRG.NO.613.44.059
Manufacturing Technology
1. Cold drawing process line of adequate capacity to manufacture cold deformed pipe with inner hexagonal profile. 2. Heat treatment line to achieve required mechanical properties as specified. 3. Suitable end finishing machine for carrying out cutting of cold deformed pipe with inner hexagonal profile to required length by cold machining Hot Rolling.
Testing / Inspection Facility
Mechanical, metallurgical, chemical analysis and crack detection testing facilities to test the required parameters as specified in specification no. OFM/TDS/TRACK-72/01.
62
194
Number
5684
EOI/PROVISIONAL/REGULARIZATION
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
Name
Code
Quantity
Approx Value
Select
Tape Nylon for Aerospace Purpose 25 MM Black
Description
Tape Nylon for Aerospace Purpose 25 MM Black
Specification
IS-4228-1979 (RA-2003) (Reaffirmed 2013) and Prov. Specn No.S/6421/Bag Sleeping Lt Wt/TC-6
Testing / Inspection Facility
Visual Mechanical Chemical
21
1
Metre
Nylon Sewing Thread OG Vol No L 2
Description
Nylon Sewing Thread OG Vol No L-2
Specification
IS-4229 (RA-2008) (RA 2013) and Prov. Specn. No. S/6421/Bag Sleeping Lt Wt/TC-6
Testing / Inspection Facility
Visual Mechanical Chemical
21
1
Kilometer(km)
Toggle Cord Stopper
Description
Toggle ( Cord Stopper)
Specification
Prov. Specification No. S/6421/Bag Sleeping Lt Wt/TC-6
Testing / Inspection Facility
Visual Mechanical Chemical
21
1
Number
Fabric Nylon PU Coated WP OG 115 GSM
Description
Fabric Nylon PU Coated WP OG 115 GSM
Specification
Specn. No. S/6421/Bag Sleeping Lt Wt/TC-6
Manufacturing Technology
Weaving Processing Coating
Testing / Inspection Facility
visual mechanical chemical
21
1
Metre
Fastener Hook and Loop Tape OG
Description
Fastener Hook and Loop Tape OG
Specification
IS-8156-1994 (RA-2009) and Prov. Specn. No. S/6421/Bag Sleeping Lt Wt/TC-6
Manufacturing Technology
Weaving Raising Processing
Testing / Inspection Facility
Visual Mechanical Testing
21
1
Set
Ladder Lock for Tape Width 25 MM
Description
Ladder Lock for Tape Width 25 MM
Specification
Prov. Specn. No. S/6421/bag Sleeping Lt Wt/TC-6
Testing / Inspection Facility
Visual Mechanical Chemical
21
1
Number
Tape Nylon For Aerospace Purpose 25 MM OG
Description
Tape Nylon For Aerospace Purpose 25 MM OG
Specification
IS-4228-1979 (RA-2003) (Reaffirmed 2013) and Prov. Specn. No. S/6421/Bag Sleeping Lt Wt/TC-6
Testing / Inspection Facility
Visual Mechanical Chemical
21
1
Metre
Two Way Open End Heavy Duty Zipper 150 Cms
Description
Two Way open End Heavy Duty Zipper 150 Cms
Specification
IS-14181-2002 (RA-2013) & Provisional Specification S/6421/Bag Sleeping Lt Weight/TC-6
Manufacturing Technology
Weaving Moulding Processing
Testing / Inspection Facility
visual Mechanical Chemical
21
1600
Number
Cord Nylon Braided OG 2452 N
Description
Cord Nylon Braided OF 2452 N
Specification
JSS: 4020-9-1999, Provisional specification S/6421/Bag Sleeping Lt. Wt./ TC-6
Testing / Inspection Facility
visual Mechnical Chemical
21
1
Metre
5685
MPF/OTE/19TE211238
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
3996406168 FORG FOR GEAR INTERMED 175 45 005F
Physical Verification needed
Description
FORG.FOR GEAR INTERMED.175-45-005F
Specification
FORG.FOR GEAR INTERMED.175-45-005F
Testing / Inspection Facility
39
103
Number
3996406167 FORG FOR GEAR DRIVING 175 45 004
Physical Verification needed
Description
FORG.FOR GEAR DRIVING 175-45-004
Specification
FORG.FOR GEAR DRIVING 175-45-004
Testing / Inspection Facility
39
73 NOS
Number
5686
110190301
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
Tape Nylon 2point54 cm 1 0 UD BS 250 Kg
Description
Tape Nylon 2.54 cm + 1 – 0 U/D BS: 250 Kg
Specification
ADRDE/Specn/64(a)
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2101786989
24365
Metre
FABRICATION OF DANGER BUILDING COAT WHITE THROUGH TRADE
Description
FABRICATION OF DANGER BUILDING COAT WHITE THROUGH TRADE
Specification
SPECN-AS PER TECHNICAL PARTICULARS ENCLOSED
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
9911036848
800
Number
FABRICATION OF DANGER BUILDING TROUSERS WHITE THROUGH TRADE
Description
FABRICATION OF DANGER BUILDING TROUSERS WHITE THROUGH TRADE
Specification
SPECN-AS PER TECHNICAL PARTICULARS ENCLOSED
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
9911036849
800
Number
5687
3193000956
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
IC BRACKET for LMG
Description
IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition
Specification
IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition
Drawing no.
IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition
Testing / Inspection Facility
As per manufacturing Technology machining document
03
1068
Number
NIV PACK FRAME
Description
NIV PACK FRAME
Specification
DRAWING NO.CQA(GS)/US/557 except that :- Drg sheet No. 2 of 3 Dtd :24.04.2019
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2110008014
378
Number
HOUSING WITH FERRULE AND RUBBER SLEEVE FOR PP MIRAG 2000 SEA HARRIER AC
Description
HOUSING WITH FERRULE & RUBBER SLEEVE FOR P.P. MIRAG 2000/SEA HARRIER A/C
Specification
SPECN-ADRDE/1357(a)
Drawing no.
SPECN-ADRDE/1357(a)
Testing / Inspection Facility
2110077018
19
Number
Sub Assy of Spring for Auxiliary Spring PTAR Parachute
Description
Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute
Specification
CQA(GS)/US/563
Testing / Inspection Facility
2110080016
272
Number
BALL TYPE SPRING PSM SERIES
Description
BALL TYPE SPRING(PSM SERIES)
Specification
ADRDE/1332(b)
Manufacturing Technology
AS PER DRAWING/SPECIFICATION
Testing / Inspection Facility
AS PER DRAWING/SPECIFICATION
2101787006
208
Number
CORDAGE POLYESTER HEAT SET BS 364 KG WITH RED THREAD
Description
CORDAGE POLYESTER HEAT SET BS:364 KG WITH RED THREAD
Specification
ADRDE/SPECN/74(a)
Testing / Inspection Facility
2101126391
1000
Metre
CORDAGE POLYESTER HEAT SET BS 318KG
Description
CORDAGE POLYESTER HEAT SET BS:318KG
Specification
ADRDE/SPECN/74(a)
Testing / Inspection Facility
2101126358
1225
Metre
5688
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR
Physical Verification needed
Description
MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR
Specification
MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
1500
Number
BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR
Physical Verification needed
Description
BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR
Specification
BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
1500
Number
MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR
Physical Verification needed
Description
MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR
Specification
MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
1500
Number
Supply Installation and Commissioning of Pneumatic Assembly Drg No VMT SK 119 18000 11 with Festo Make Control Cabinet Part No IN CS 3049329 for 125 mm SCCC Winding Machine as per Part List Sheet No 1 to 8 and 10 and 11 Drawing and Scope of Work at
Physical Verification needed
Description
Supply Installation and Commissioning of Pneumatic Assembly Drg No VMT SK 119 18000 11 with Festo Make Control Cabinet Part No. IN CS 3049329 for 125 mm SCCC Winding Machine as per Part List Sheet No 1 to 8 and 10 and 11 Drawing and Scope of Work attached
Specification
Supply Installation and Commissioning of Pneumatic Assembly Drg No VMT SK 119 18000 11 with Festo Make Control Cabinet Part No. IN CS 3049329 for 125 mm SCCC Winding Machine as per Part List Sheet No 1 to 8 and 10 and 11 Drawing and Scope of Work attached
Drawing no.
Drg No VMT SK 119 18000 11
Manufacturing Technology
Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.
Testing / Inspection Facility
Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.
30
01
Whole job
LOCK OCK WITH BUCKLE
Description
LOCK OCK WITH BUCKLE
Specification
ADRDE/1354.
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110069032
112
Number
MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071
Description
MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071
Specification
MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
IC TO DRG NO TEND 922 F FOR SLIDE ICR 1328 1005 001604
Description
IC TO DRG.NO.:TEND.922 F FOR SLIDE.(ICR-1328) 1005-001604
Specification
AS PER IC TO DRG.NO.:TEND.922 F FOR SLIDE.(ICR-1328) 1005-001604
Drawing no.
TEND.922 F FOR SLIDE.(ICR-1328) 1005-001604
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
IC TO DRG NO TEND 1100 D FOR RAMP BACKSIGHT ICR 1253
Description
IC TO DRG NO.:TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)
Specification
AS PER DRG NO.:TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)
Drawing no.
TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
WRENCH ADJUSTING FORESIGHT AND LOCK NUT FORE SIGHT TO DRAWING NO R F I SK NO 1051 STR3 MODIFIED FOR RIFLE 7POINT62 mm1A1
Description
WRENCH, ADJUSTING FORESIGHT & LOCK NUT FORE SIGHT TO DRAWING NO.R.F.I.SK.NO.1051 *3 (MODIFIED)(FOR RIFLE 7.62 mm1A1)
Specification
AS PER DRAWING NO.R.F.I.SK.NO.1051 *3 (MODIFIED)(FOR RIFLE 7.62 mm1A1)
Drawing no.
R.F.I.SK.NO.1051 *3 (MODIFIED)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
SUPPLY OF SCREW PISTOL GRIP TO D S CAT NO 5305 005004 ICR 1380 TO LATEST D C No 24275 SA DATED 26 02 1999 FOR DC NO LATEST ISSUE TO BE FOLLOWED
Description
SUPPLY OF SCREW PISTOL GRIP TO D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED
Specification
AS PER D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED
Drawing no.
D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
IC Trigger for 7POIN62mm
Description
TE NO. D222 BO0209
Specification
TE NO. D222 BO0209
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Ample
MFG AND SUPPLY OF PIN LEAF TO D S CAT NO 5315 001767 DC NO 22647 SA DATED 20 08 1994 REQD IN WHITE FINISHED CONDITION ICR 1329
Description
MFG & SUPPLY OF PIN LEAF TO D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)
Specification
AS PER D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)
Drawing no.
D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
SUPPLY OF PIN AXIS HAMMER TO DS CAT NO 5315 009115 DC NO
Description
SUPPLY OF PIN AXIS HAMMER TO DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION . FOR DC NO. LATTEST ISSUE TO BE FOLLOWED. (WITH FIRMS MATER
Specification
AS PER DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION
Drawing no.
DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
SEAR SAFETY ICR 1281 L F 7011606010
Description
SEAR SAFETY (ICR-1281) D.S. CAT No.:1005-001697, D.C.No.22816-SA DATED:20.01.1995 (ICR-1281)
Specification
AS PER DRAWING
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91 D S CAT No 1005 007723 D C No 22706 SA Dt 5 point 11point 94 IMPROVED VERSION FOR RIFLE 7point 62mm 1A1 TO D S C T No 1005 007504 1005 007505 1005 007506 1005 007507 1005 001593 1005 1718
Description
GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
Specification
AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
Drawing no.
DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
SCREW HAND GUARD TO D S CAT NO 5305 005008 DC NO 24312 SA DATED 03 poiint 04point 99 ICR 1196 LATEST ISSUE SHOULD BE FOLLOWED
Description
SCREW HAND GUARD TO D.S.CAT. NO. 5305-005008 DC NO.24312-SA DATED 03-04-99 (ICR-1196) LATEST ISSUE SHOULD BE FOLLOWED.
Specification
AS PERD.S.CAT. NO. 5305-005008 DC NO.24312-SA DATED 03-04-99 (ICR-1196) LATEST ISSUE SHOULD BE FOLLOWED.
Drawing no.
(ICR 1196) D.S.CAT. NO. 5305-005008 DC NO.24312-SA
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
SCREW LOCKING HINGE PIN
Description
SCREW LOCKING HINGE PIN D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.
Specification
AS PER D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.
Drawing no.
(ICR-1195) D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
Bracket Module Containing Bracket RHS to Drg No 1403 01 01 09 RHS and Bracket LHS to Drg No 1403 01 01 09 LHS 6245140309
Description
Bracket Module Containing:-
A) Bracket RHS to Drg.No.1403-01-01-09RHS
B) Bracket LHS to Drg.No.1403-01-01-09LHS
Specification
Bracket Module Containing:-
A) Bracket RHS to Drg.No.1403-01-01-09RHS
B) Bracket LHS to Drg.No.1403-01-01-09LHS
Drawing no.
A) Bracket RHS to Drg.No.1403-01-01-09RHS B) Bracket LHS to Drg.No.1403-01-01-09LHS
Manufacturing Technology
melting facility & casting facility firm should have photostatting & heat treatment facility or Tie-up with other unit. firm should have foundry for steel items. . firm should have laboratory for chemical testing before and after drawn sample or Tie-up with the other laboratory unit. firm should have machinery facility for steel component.
Testing / Inspection Facility
chemical lab & mechanical lab Firm should have painting facility.
62
40
Number
Electrical Assy Drg No VMT SK 119 19000 11 for Winding Machine 125MM SCCC As per Part List 09 Sheets Drgs and Scope of Work Enclosed Qty 1 Set
Physical Verification needed
Description
Electrical Assy. Drg. No. VMT-SK-119-19000-11 for Winding Machine 125MM SCCC (As per Part List 09 Sheets, Drgs. & Scope of Work Enclosed), Qty: 1 Set
Specification
Electrical Assy. Drg. No. VMT-SK-119-19000-11 for Winding Machine 125MM SCCC (As per Part List 09 Sheets, Drgs. & Scope of Work Enclosed), Qty: 1 Set
Drawing no.
Drg. No. VMT-SK-119-19000-11
Manufacturing Technology
Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. . Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.
Testing / Inspection Facility
Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. . Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.
30
1
Set
CONNECTING PIECE REAR TO PT NO 1145139
Physical Verification needed
Description
CONNECTING PIECE REAR TO PT NO 1145139
Specification
CONNECTING PIECE REAR TO PT NO 1145139
Manufacturing Technology
As per tender document Annexure L
Testing / Inspection Facility
As per tender document Annexure L
90
3
Number
CONNECTING PIECE FRONT TO PT NO 1148858
Physical Verification needed
Description
CONNECTING PIECE FRONT TO PT NO 1148858
Specification
CONNECTING PIECE FRONT TO PT NO 1148858
Manufacturing Technology
As per tender document Annexure L
Testing / Inspection Facility
As per tender document Annexure L
90
3
Number
5689
O113-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
BODY PR DIE CASTING WITHOUT GROOVE TO DRG NO ODD C 1028 1
Physical Verification needed
Description
BODY PR. DIE CASTING WITHOUT GROOVE TO DRG.NO. ODD/C/1028/1
Specification
BODY PR. DIE CASTING WITHOUT GROOVE TO DRG.NO. ODD/C/1028/1
Drawing no.
DRG.NO. ODD/C/1028/1
Manufacturing Technology
As per Sr.No.65 of Annexure-A with OFB Letter No.OFB/108/Online VR/QC dated 12.02.2019
Testing / Inspection Facility
As per Sr.No.65 of Annexure-A with OFB Letter No.OFB/108/Online VR/QC dated 12.02.2019
74
894 nos.
Number
9081005806 GUIDE TO DRG NO GCF 50 40803
Description
GUIDE TO DRG.NO.GCF/50/40803
Specification
GUIDE TO DRG.NO.GCF/50/40803 (REF.DRG.NO.4076066).
Testing / Inspection Facility
90
48
Number
9081005805 GUIDE TO DRGNO GCF 50 40802
Description
GUIDE TO DRG.NO.GCF/50/40802
Specification
TO DRG.NO.GCF/50/40802 (REF.DRG.NO.4076063)
Testing / Inspection Facility
90
48
Number
9081005804 GUIDE TO DRG NO GCF 50 40801
Description
GUIDE TO DRG.NO.GCF/50/40801
Specification
GUIDE TO DRG.NO.GCF/50/40801 (REF.DRG.NO.4076056).
Testing / Inspection Facility
90
48
Number
9081005803 GUIDE TO DRG NO GCF 50 40800
Description
GUIDE TO DRG.NO.GCF/50/40800
Specification
GUIDE TO DRG.NO.GCF/50/40800 (REF.DRG.NO.4076054)
Testing / Inspection Facility
90
48
Number
PIN DETENT SPRING TO CQA A DRG NO 13046 0 0 AS PER DC NO 36804 A DATED 01 01 2002
Physical Verification needed
Description
PIN DETENT SPRING TO CQA(A) DRG. NO. 13046-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002
Specification
PIN DETENT SPRING TO CQA(A) DRG. NO. 13046-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002
Testing / Inspection Facility
00
82654
Ample
PIN DETENT PIVOT TO CQA A DRG NO 13038 0 0 AS PER DC NO 36804 A DATED 01 01 2002
Physical Verification needed
Description
PIN DETENT PIVOT TO CQA(A) DRG. NO. 13038-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002
Specification
PIN DETENT PIVOT TO CQA(A) DRG. NO. 13038-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002
Testing / Inspection Facility
00
82654
Ample
WASHER TO CQA A DRG NO 13975 0 0 AS PER DC NO 36804 A DATED 01 01 2002
Physical Verification needed
Description
WASHER TO CQA (A) DRG. NO. 13975-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)
Specification
WASHER TO CQA (A) DRG. NO. 13975-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)
Testing / Inspection Facility
00
37425
Ample
PIN ROTOR LOCK TO CQA A DRG NO 13047 0 0 AS PER DC NO 36804 A DATED 01 01 2002
Physical Verification needed
Description
PIN ROTOR LOCK TO CQA(A) DRG. NO. 13047-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)
Specification
PIN ROTOR LOCK TO CQA(A) DRG. NO. 13047-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)
Testing / Inspection Facility
00
41327
Ample
BAYONET 2A FOR 7point62mm
Description
TE.NO. D182 G5 2344
Specification
TE.NO. D182 G5 2344
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Ample
IDENTIFICATION LIST FOR RIFLE 7point 62MM 1A1 TO CODE NO IL IW 29 AS PER SPECIFICATIONS and REQUIREMENTS MENTIONED IN THE ANNEXURE
Description
IDENTIFICATION LIST FOR RIFLE 7.62MM 1A1 TO CODE NO.IL/IW/29 (AS PER SPECIFICATIONS& REQUIREMENTS MENTIONED IN THE ANNEXURE)
Specification
IDENTIFICATION LIST FOR RIFLE 7.62MM 1A1 TO CODE NO.IL/IW/29 (AS PER SPECIFICATIONS& REQUIREMENTS MENTIONED IN THE ANNEXURE)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
IDENTIFICATION LIST FOR RIFLE 7point 62MM 1A1 TO CODE NO IL IW 29 AS PER SPECIFICATIONS and REQUIREMENTS MENTIONED IN THE ANNEXURE
Description
IDENTIFICATION LIST FOR RIFLE 7.62MM 1A1 TO CODE NO.IL/IW/29 (AS PER SPECIFICATIONS& REQUIREMENTS MENTIONED IN THE ANNEXURE)
Specification
IDENTIFICATION LIST FOR RIFLE 7.62MM 1A1 TO CODE NO.IL/IW/29 (AS PER SPECIFICATIONS& REQUIREMENTS MENTIONED IN THE ANNEXURE)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
CAN OIL MG MK3 DS CAT NO 4930 000800 1005 000336 TO 1005 000338 and 5310 002657 DC NO 23500 SA DT 20 point 9 point 96
Description
CAN, OIL MG MK3 DS CAT NO. 4930-000800, 1005-000336 TO 1005-000338 & 5310-002657, DC NO. 23500-SA DT.20-9-96
Specification
AS PER DS CAT NO. 4930-000800, 1005-000336 TO 1005-000338 & 5310-002657, DC NO. 23500-SA DT.20-9-96
Drawing no.
DS CAT NO. 4930-000800, 1005-000336 TO 1005-000338 & 5310-002657, DC NO. 23500-SA DT.20-9-96
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
Blank Firing Attachement for 7POINT62mm Rifle
Description
DS CAT NO. 1005-002050
Specification
DS CAT NO. 1005-002050
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Ample
Blank Firing Attachement for 7POINT62mm Rifle
Description
DS CAT NO. 1005-002050
Specification
DS CAT NO. 1005-002050
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Ample
BOTTLE OIL MK V DS CAT NO 1005 000323 1005 000324 1005 000326 100 000327 1005 000328 DC NO 23296 SA DT 21POINT03POINT96 FOR DC NO LATEST ISSUE TO BE FOLLOWED
Description
BOTTLE OIL MK-V, DS CAT.NO.1005-000323,1005-000324, 1005-000326,1005-000327,1005-000328, DC.NO.23296 SA-DT:21/03/96. FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.
Specification
AS PER DS CAT.NO.1005-000323,1005-000324, 1005-000326,1005-000327,1005-000328, DC.NO.23296 SA-DT:21/03/96. FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.
Drawing no.
DS CAT.NO.1005-000323,1005-000324, 1005-000326,1005-000327,1005-000328, DC.NO.23296
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
Sling Assembly for 7POINT62mm Rifle
Description
As per Drawing
Specification
As per Drawing
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Ample
CHEST RIFLE to Hold 10 Rifles for 7 POINT 62mm Rifle
Description
LF:6583305001
Specification
LF:6583305001
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Ample
PULL THROUGH 1A NYLON AS PER DS CAT NO 1005 001760 FOR DC NO 22520 SA DATED 2 point 5 point 94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7point 62mm 1A1
Description
PULL THROUGH 1A(NYLON) AS PER DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1
Specification
AS PER DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1
Drawing no.
DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
3000
Number
LV6 OBLIQUE MT 3110 002686 BALL BEARING DIA 3 POINT175mm TOIS 2898 1976 GRADE 5POINT MATL IS 4398 1972 FOR ICR 72SA
Description
LV6/MT7-3110-002686 BALL BEARING DIA. 3.175mm TOIS: 2898, 1976 GRADE 5.MATL: IS 4398-1972. (FOR ICR 72SA)
Specification
LV6/MT7-3110-002686 BALL BEARING DIA. 3.175mm TOIS: 2898, 1976 GRADE 5.MATL: IS 4398-1972. (FOR ICR 72SA)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
20
3000
Number