5121
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
9081002934 BRACKET RP 971634 CASTING
Physical Verification needed
Description
BRACKET RP 971634 CASTING
Specification
BRACKET - RP 971634, CASTING TO DRG. NO. RP200038
Testing / Inspection Facility
90
33
Number
9081000212 BRACKET LEFT CAST9NG DRG NO 5168972
Physical Verification needed
Description
BRACKET LEFT CAST9NG DRG NO 5168972
Specification
BRACKET LEFT CASTING TO DRG.NO.5168972
Testing / Inspection Facility
90
43
Number
9081000189 TRAIL SPADE DRG 3051623
Physical Verification needed
Description
TRAIL SPADE DRG 3051623
Specification
ST.CASTING OF TRAIL SPADE TO DRG.NO.GCF/50/39471(REF DRG NO.
3051623)(WEIGHT OF CASTING SHOULD NOT EXCEED 70 KG
Testing / Inspection Facility
90
45
Number
9081000168 CASTING OF BRACKET DRG 6333961
Physical Verification needed
Description
CASTING OF BRACKET DRG 6333961
Specification
CASTING.OF BRACKET.TO DRG NO.6333961.CONFORMING THE DRG /
NO 6333961.)
Testing / Inspection Facility
90
46
Number
BRACKET RIGHT CASTING DRG 5168971
Description
BRACKET RIGHT CASTING DRG.5168971
Specification
BRACKET RIGHT CASTING DRG.5168971
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
73
Number
BEARING HOUSING CASTING DRG4076886
Description
BEARING HOUSING CASTING DRG.4076886
Specification
BEARING HOUSING CASTING DRG.4076886
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
40
Number
TRAIL BEARING LEFT CASTING 3053351
Description
TRAIL BEARING LEFT CASTING 3053351
Specification
TRAIL BEARING LEFT CASTING 3053351
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
43
Number
TRAILBEARING RIGHT CASTING 3052991
Description
TRAILBEARING RIGHT CASTING 3052991
Specification
TRAILBEARING RIGHT CASTING 3052991
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
43
Number
BEARIG HOUSING CASTING BLANK3052989
Description
BEARIG HOUSING CASTING BLANK3052989
Specification
BEARIG HOUSING CASTING BLANK3052989
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
20
Number
HOUSING RIGHT CASTING DRG3052979
Description
HOUSING RIGHT CASTING DRG.3052979
Specification
HOUSING RIGHT CASTING DRG.3052979
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
42
Number
HOUSING LEFT CASTING DRG3052978
Description
HOUSING LEFT CASTING DRG.3052978
Specification
HOUSING LEFT CASTING DRG.3052978
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
43
Number
BEARING HOUSING CASTING DRG 3053353
Description
BEARING HOUSING CASTING DRG.3053353
Specification
BEARING HOUSING CASTING DRG.3053353
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
19
Number
BEARING HOUSING CASTING DRG3053352
Description
BEARING HOUSING CASTING DRG.3053352
Specification
BEARING HOUSING CASTING DRG.3053352
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
20
Number
BRACKET RIGHT DRGGCF 50 39480
Description
BRACKET RIGHT DRG.GCF/50/39480.
Specification
BRACKET RIGHT DRG.GCF/50/39480.
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
38
Number
BRACKET CASTING TO DRGNO3051342
Description
BRACKET CASTING TO DRG.NO.3051342
Specification
BRACKET CASTING TO DRG.NO.3051342
Manufacturing Technology
AS PAR TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PAR TENDER DOCUMENT ANNEXURE L
90
53
Number
HUB RIGHT CASTING DRGNO3051339
Description
HUB RIGHT CASTING DRG.NO.3051339
Specification
HUB RIGHT CASTING DRG.NO.3051339
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
37
Number
BEARING HOUSING CASTING 3053355
Description
BEARING HOUSING CASTING 3053355
Specification
BEARING HOUSING CASTING 3053355
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
19
Number
BEARING HOUSING CASTING 3053354
Description
BEARING HOUSING CASTING 3053354.
Specification
BEARING HOUSING CASTING 3053354.
Manufacturing Technology
AS PER TENDER DOCUMENTY ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENTY ANNEXURE L
90
18
Number
BEARING HOUSING TO DRG 3051341
Description
BEARING HOUSING TO DRG. 3051341
Specification
BEARING HOUSING TO DRG. 3051341
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
71
Number
ST CASTING OF HUB LEFT DRG 3051340
Description
ST.CASTING OF HUB LEFT DRG.3051340
Specification
ST.CASTING OF HUB LEFT DRG.3051340
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
35
Number
BRACKET CASTING TO DRGNO2025651
Description
BRACKET CASTING TO DRG.NO.2025651
Specification
BRACKET CASTING TO DRG.NO.2025651
Manufacturing Technology
AS PER TENDER DOCUMENT PART A
Testing / Inspection Facility
AS PER TENDER DOCUMENT PART A
90
37
Number
5122
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
5123
3193000956
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
HOUSING TRIGGER OF LMG BELT FED
Physical Verification needed
Description
HOUSING TRIGGER OF LMG 7.62MM BELT FED,DRG NO.SK-5817.
Specification
HOUSING TRIGGER OF LMG 7.62MM BELT FED,DRG NO.SK-5817.
Testing / Inspection Facility
Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification
70
3
Number
PICKET ASSY DRG 3014629
Physical Verification needed
Description
PICKET ASSY DRG 3014629
Specification
PICKET ASSY DRG 3014629
Testing / Inspection Facility
90
27
Number
5124
107/028/PV(A)/EOI/19-20
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
Name
Code
Quantity
Approx Value
Select
GRENADE BODY BLANK TO GSF DRG NO M 11220
Description
GRENADE BODY BLANK TO GSF DRG NO M-11220
Specification
AS PER DRAWING
Testing / Inspection Facility
62
11104
Number
5125
O113-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
BODY AS PER DRG NO MCT 3146 1
Description
BODY AS PER DRG NO MCT 3146_1 FOR CLINOMETER
Specification
BODY AS PER DRG NO MCT 3146_1 FOR CLINOMETER
Testing / Inspection Facility
74
690
Number
Housing Mechanical Drive as per Drg No MCT 3511
Physical Verification needed
Description
Housing Mechanical Drive as per Drg No MCT 3511
Specification
Housing Mechanical Drive as per Drg No MCT 3511
Manufacturing Technology
As per S. No. 61 against Annexure-A of OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019
Testing / Inspection Facility
Associated Testing/Inspection Facilities
74
56
Number
5126
110190301
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
COIL SPRING BP SU 30
Description
COIL SPRING (BP SU-30)
Specification
ADRDE/1402-03-002(a)
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2110025030
1369
Number
Tape Nylon Tubular Braided 20 mm BS 5680N BS
Description
Tape Nylon Tubular, Braided, 20 mm BS 5680N BS
Specification
ADRDE/QMS/TGTE/T/2019/08 Date: 24.06.2019
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2101787005
3751
Metre
Tape Nylon Tubular Braided 20 mm BS 5680N BS
Description
Tape Nylon Tubular, Braided, 20 mm BS 5680N BS
Specification
ADRDE/QMS/TGTE/T/2019/08 Date: 24.06.2019
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2101787005
3751
Metre
MALE CONNECTOR
Description
MALE CONNECTOR
Specification
ADRDE/PAS/2008/24(a)
Drawing no.
ADRDE/PAS/2008/24(a)
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2010071033
316
Number
COTTON PADDING 2 THICK 135 CM WIDTH
Description
COTTON PADDING 2" THICK 135 CM WIDTH
Specification
SPECN-APPROVED QUALITY
Testing / Inspection Facility
2101126417
705
Metre
QUICK RELEASE UNIT
Description
QUICK RELEASE UNIT
Specification
SPECN.NO.: ADRDE/1369(a) DRD/26/98.
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2110071022
431
Number
EXTRACTOR SPRING MAG
Description
EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION.,
Specification
EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION.,
Drawing no.
DS CAT NO. 5360-000525
Testing / Inspection Facility
Chemical and Mechanical prosperities as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
70
192
Number
METAL COMPONENT SPRING
Description
METAL COMPONENT SPRING
Specification
1.6.01-01-02-02
Drawing no.
1.6.01-01-02-02
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
2110080001
592
Number
COMBINATION HARNESS THROUGH TRADE ASSISTANCE FOR STITCHING ONLY
Description
COMBINATION HARNESS THROUGH TRADE ASSISTANCE FOR STITCHING ONLY
Specification
SPECN-DMSRD&E/T&DS/93/410(B)
Manufacturing Technology
AS PER SPECIFICATION/DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION/DRAWING
9911036867
5158
Number
5127
MPF/OTE/19TE211238
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
SET OF GASKETS AS PER ANNEXURE GKT1 OF KAVACH MOD II 08 Sets
Physical Verification needed
Description
SET OF GASKETS AS PER ANNEXURE GKT1 OF KAVACH MOD II 08 Sets
Specification
SET OF GASKETS AS PER ANNEXURE GKT1 OF KAVACH MOD II 08 Sets
Manufacturing Technology
i) Rubber Moulding
ii) Die making
In case tenderer is outsourcing any/some of the above activities, copy of the agreement with such source shall be submitted. The Rubber moulding facility is mandatory
Testing / Inspection Facility
(i) Standard Measuring Instruments & Gauges
(ii) Rubber Testing Facility with NABL/IRMRA accreditation
Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced
71
08 SET
Set
MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC1 FOR KAVACH MOD II
Physical Verification needed
Description
MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC1 FOR KAVACH MOD II, QTY: 08 SETS
Specification
MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC1 FOR KAVACH MOD II, QTY: 08 SETS
Drawing no.
ANNEXURE STC1
Manufacturing Technology
i) Foundry Facility for Steel Casting
ii) Heat Treatment Facility
iii) Conventional/CNC machining
iv) Surface Treatment
In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory.
Testing / Inspection Facility
(i) Measuring Instruments/CMM & Gauges
(ii) Radiography Testing Facility duly certified by Government
(iii) Material Chemical & Physical facility with NABL accreditation
Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced.
71
08 Set
Set
MANUFACTURING AND SUPPLY OF SET OF STAINLESS STEEL PLATE AS PER ANNEXURE SSP1 FOR KAVACH MOD II
Physical Verification needed
Description
MANUFACTURING AND SUPPLY OF SET OF STAINLESS STEEL PLATE AS PER ANNEXURE SSP1 FOR KAVACH MOD II , QTY: 08 Sets
Specification
MANUFACTURING AND SUPPLY OF SET OF STAINLESS STEEL PLATE AS PER ANNEXURE SSP1 FOR KAVACH MOD II , QTY: 08 Sets
Manufacturing Technology
(i)Conventional /CNC machining Facility
(ii) Grinding Facility
In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory
Testing / Inspection Facility
(i) Standard Measuring Instruments & Gauges
(ii)Material Chemical & Physical facility with NABL accreditation
Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced
71
08 Sets
Set
Striker Mechanism Housing Modified
Description
Striker Mechanism Housing Modified (NAD 7606/6) Zinc Alloy- Alloy-"A", BS:1004:1955 as per Drg No. SK- 5741*. Die Casting
Specification
Striker Mechanism Housing Modified (NAD 7606/6) Zinc Alloy- Alloy-"A", BS:1004:1955 as per Drg No. SK- 5741*. Die Casting
Drawing no.
Drg No. SK- 5741*. Die Casting
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.given drawing 2-Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
08
1770
Number
MANUFACTURING AND SUPPLY OF SET OF HEAVY MACHINING ITEMS AS PER ANNEXURE MH1 FOR KAVACH MOD II
Physical Verification needed
Description
MANUFACTURING & SUPPLY OF SET OF HEAVY MACHINING ITEMS AS PER ANNEXURE MH1 FOR KAVACH MOD II , QTY: 08 SETS
Specification
MANUFACTURING & SUPPLY OF SET OF HEAVY MACHINING ITEMS AS PER ANNEXURE MH1 FOR KAVACH MOD II , QTY: 08 SETS
Manufacturing Technology
(i) Heat treatment Facility
(ii) Coventional/CNC Machining
(iii)Grinding
iv) Surface Treatment Facility
v) Hard Chrome Plating
vi) Nitriding
vi) Gear Cutting
In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory
Testing / Inspection Facility
(i) Measuring Instruments/CMM & Gauges
(ii) Material Chemical & Physical facility with NABL accreditation
Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced
71
8 Sets
Set
MANUFACTURING AND SUPPLY OF SET OF FABRICATION WELDING AND MACHINING ITEMS AS PER ANNEXURE SWF2 FOR KAVACH MOD II
Physical Verification needed
Description
MANUFACTURING AND SUPPLY OF SET OF FABRICATION WELDING AND MACHINING ITEMS AS PER ANNEXURE SWF2 FOR KAVACH MOD II FOR QTY 08 SETS
Specification
MANUFACTURING AND SUPPLY OF SET OF FABRICATION WELDING AND MACHINING ITEMS AS PER ANNEXURE SWF2 FOR KAVACH MOD II FOR QTY 08 SETS
Manufacturing Technology
i)Heat Treatment facility
ii) Conventional/CNC machining
iii) Welding
iv) Surface Treatment facility
In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory
Testing / Inspection Facility
i) Measuring Instruments/CMM & Gauges
ii) Material Chemical & Physical facility with NABL accreditation
Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced
71
08 Set
Set
9069112607 UPPER MOUNTING PLATFORM
Physical Verification needed
Description
9069112607 UPPER MOUNTING PLATFORM
Specification
9069112607 UPPER MOUNTING PLATFORM
Manufacturing Technology
9069112607 UPPER MOUNTING PLATFORM
Testing / Inspection Facility
9069112607 UPPER MOUNTING PLATFORM
90
2
Number
GUN SHIELD TO DRG NO GCF AD 230 026
Physical Verification needed
Description
GUN SHIELD TO DRG NO GCF AD 230 026
Specification
GUN SHIELD TO DRG NO GCF AD 230 026
Manufacturing Technology
GUN SHIELD TO DRG NO GCF AD 230 026
Testing / Inspection Facility
GUN SHIELD TO DRG NO GCF AD 230 026
90
2
Number
Magnet Permanent for Firing Device
Description
Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768
Specification
Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768
Drawing no.
Drg. No. CQA(I)393/8
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
31868
Number
PLUG FOR FIRING DEVICE 1B FOR MINE
Description
PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE
Specification
PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE
Drawing no.
DRG.NO. CQA(I)393/4
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.given drawing 2-Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
18171
Number
5128
2019000129
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 58CM
Description
PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 58CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION
Specification
PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 58CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
5620
Number
PLASTIC SLIDE FASTENERS HEAVY DUTY CLOSED END AUTO LOCK KHAKI 36 CM
Description
PLASTIC SLIDE FASTENERS HEAVY DUTY CLOSED END AUTO LOCK KHAKI 36 CM , SPECIFICATION NO. - IS:14181 (PART 1 TO 3) 2002 WITH AMENDMENT NO. 2, MARCH 2008
Specification
PLASTIC SLIDE FASTENERS HEAVY DUTY CLOSED END AUTO LOCK KHAKI 36 CM , SPECIFICATION NO. - IS:14181 (PART 1 TO 3) 2002 WITH AMENDMENT NO. 2, MARCH 2008
Testing / Inspection Facility
21
2882
Number
RIBBED CUFF WOOLLEN KHAKI 15X10 CMS
Description
RIBBED CUFF WOOLLEN KHAKI 15X10 CMS CIT&C/TC-12/11
Specification
RIBBED CUFF WOOLLEN KHAKI 15X10 CMS CIT&C/TC-12/11
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
3936
Pair
7107006009 MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC2 FOR KAVACH MOD II
Physical Verification needed
Description
7107006009 MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC2 FOR KAVACH MOD II
Specification
7107006009 MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC2 FOR KAVACH MOD II
Manufacturing Technology
(i) Foundry Facility for Aluminium Casting
(ii) Heat Treatment Facility
(iii) Conventional/CNC machining
(iv) Surface Treatment
In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The foundry facility is mandatory.
Testing / Inspection Facility
(i) Measuring Instruments/CMM & Gauges
(ii) Radiography Testing facility duly certified by the Government
(iii) Material Chemical & Physical facility with NABL accreditation
Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced.
71
8
Set
5129
EOI/PROVISIONAL/REGULARIZATION
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
Name
Code
Quantity
Approx Value
Select
Composite Barrier Non Woven Fabric 70GSM Width 160 CMS White
Description
Composite Barrier Non Woven Fabric 70GSM Width 160 CMS White( Clothing for Protection Against Contact With Blood And Body Fluids As per ISO: 16603
Specification
As per ISO: 16603
Manufacturing Technology
Web Formation Technology Bonding Technology Lamination Tehnology
Testing / Inspection Facility
Thickness Gram Per Square Meter Synthetic Blood Penetration Resistance Test
21
As Per Requirement
Kilogram
7107006010 MANUFACTURING AND SUPPLY OF SET OF ALUMINIUM CASTING ITEMS AS PER ANNEXURE ALC1 FOR KAVACH MOD II
Physical Verification needed
Description
MANUFACTURING AND SUPPLY OF SET OF ALUMINIUM CASTING ITEMS AS PER ANNEXURE ALC1 FOR KAVACH MOD II
Specification
MANUFACTURING AND SUPPLY OF SET OF ALUMINIUM CASTING ITEMS AS PER ANNEXURE ALC1 FOR KAVACH MOD II
Manufacturing Technology
1) Foundry Facility for Aluminium Casting
2) Heat Treatment facility
3) Conventional/CNC machining
4) Surface Treatment
Testing / Inspection Facility
1) Measuring Instruments/CMM & Gauges
2) Radiography Testing facility duly certified by the Government
3) Material Chemical & Physical facility with NABL accreditation
71
8
Set
9081001250 COVER PART NO 1155764
Physical Verification needed
Description
COVER PART NO 1155764
Specification
AS PER PART A
Testing / Inspection Facility
90
10
Number
7131506157 FORGING FOR BODY DRG NO 765 15 157 3
Physical Verification needed
Description
FORGING FOR BODY DRG NO 765-15-157 3
Specification
AS PER DRG NO 765-15-157 3
Drawing no.
DRG NO 765-15-157 3
Manufacturing Technology
AS PER DRG NO 765-15-157 3
Testing / Inspection Facility
AS PER DRG NO 765-15-157 3
71
152
Number
7131506152 FORGING FOR DRIVE SHAFT DRG NO FG 765 15 152 3
Physical Verification needed
Description
FORGING FOR DRIVE SHAFT DRG NO FG-765-15-152-3
Specification
AS PER DRG NO FG-765-15-152-3
Drawing no.
DRG NO FG-765-15-152-3
Manufacturing Technology
AS PER DRG NO FG-765-15-152-3
Testing / Inspection Facility
AS PER DRG NO FG-765-15-152-3
71
151
Number
7131506005 FORGING FOR SUN GEAR FG 765 15 5 3
Physical Verification needed
Description
FORGING FOR SUN GEAR FG-765-15-5-3
Specification
AS PER DRG FG-765-15-5-3
Testing / Inspection Facility
71
453
Number
lock as per olf std 243
Physical Verification needed
Description
lock as per olf std 243
Specification
lock as per olf std 243
Drawing no.
lock as per olf std 243
Manufacturing Technology
AS PER OFB LETTER ANNXURE 1
Testing / Inspection Facility
AS PER OFB LETTER ANNEXU8RE 1
17
1400
Number
7131536156 CARRIER FORGING TO DRG NO 765 15 156 3
Description
CARRIER FORGING TO DRG NO 765 -15-156- 3
Specification
AS PER DRG NO 765 -15-156- 3
Drawing no.
DRG NO 765 -15-156- 3
Manufacturing Technology
AS PERDRG NO 765 -15-156- 3
Testing / Inspection Facility
AS PER DRG NO 765 -15-156- 3
71
137
Number
Tape Nylon 15 mm BS 185 KG UD
Description
Tape Nylon 15 mm BS 185 KG U/D
Specification
The Tape shall be in continuous length of 110 M (Excluding Sampling) Without Any Flag Otherwise That Roll Be Treated As Short Length.
ADRDE/QMS/TGTE/T/2019/02 Date: 10/05/2019
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101221372
87811
Metre
Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route
Description
Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route
Specification
Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route
Drawing no.
DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route
Manufacturing Technology
MIM ROUTE Chemical and mechanical properties as per std. given drawing.
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
70
852
Number
LEVER CATCH MAGAZINE FOR JVPC through MIM ROUTE
Description
LEVER CATCH MAGAZINE DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM (MIM ROUTE)
Specification
DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM
Drawing no.
DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
7012470187
228
Number
Piece Guide for JVPC through MIM Route
Description
Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA
Specification
Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA
Drawing no.
0204 03 04 19 23 002 00DA
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
70
1077
Number
Rear sight for JVPC through MIM Route
Description
Rear sight Drg no. 0204 03 04 00 01 005 00DA for JVPC 5.56MM (MIM Route)
Specification
Rear sight Drg no. 0204 03 04 00 01 005 00DA for JVPC 5.56MM (MIM Route)
Drawing no.
0204 03 02 00 01 005 00DD
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
70
1159
Number
PULL THROUGH 5 POINT 56 MM 1A NYLON
Description
PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Specification
PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Testing / Inspection Facility
71
7684
Number
ALUMINIUM KEEL IN 3 INTERLOCKING SECTION COMPLETE WITH LOCKING PLATE AND FASTENERS
Description
ALUMINIUM KEEL IN 3 INTERLOCKING SECTION COMPLETE WITH LOCKING PLATE & FASTENERS
Specification
ALUMINIUM as per IS 737, Marine Grade Locking Plate, Keel Hook and Nut & Bolt SS 316 Grade As per NCD 4006 Issu-3 Mar 2014
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
9911037677
22
Set
9081001243 LINKAGE SYSTEM PART NO 1137083
Description
LINKAGE SYSTEM PART NO 1137083
Specification
LINKAGE SYSTEM AS PER THE DESCRIPTION AND BILL OF MATERIAL
(enclosed) OF PART NO 1137083.
Testing / Inspection Facility
90
04
Number
9081005682 LOADING PENDULAM TO PART NO 1145142
Description
LOADING PENDULAM TO PART NO.1145142
Specification
LOADING PENDULAM TO PART NO.1145142
(EXCLUDING HYDRAULIC CYLINDER LOADING TRAY-1145452)
Testing / Inspection Facility
90
18
Number
9081005205 DRAWBAR TO PT NO 1143440
Description
DRAWBAR TO PT.NO.1143440
Specification
DRAWBAR TO PT.NO.1143440, AS PER ANNEXURE NO. DHANUSH/
1143440/2017.
Testing / Inspection Facility
90
18
Number
9081001538 COLLAPSIBLE YOKE TO PART NO 6387168
Description
9081001538 COLLAPSIBLE YOKE TO PART NO 6387168
Specification
9081001538 COLLAPSIBLE YOKE TO PART NO 6387168
Testing / Inspection Facility
90
36
Number
9081001535 CASTOR WHEEL ARM RIGHT PT NO 1130431
Description
CASTOR WHEEL ARM RIGHT PT NO1130431
Specification
CASTOR WHEEL ARM RIGHT PT NO1130431
Testing / Inspection Facility
90
18
Number
9081001534 CASTOR WHEEL ARM LEFT PT NO 1130430
Description
CASTOR WHEEL ARM LEFT PT NO 1130430.
Specification
CASTOR WHEEL ARM LEFT PT NO 1130430.
Testing / Inspection Facility
90
18
Number
5130
2019DTE121
Ordnance Cable Factory Chandigarh
The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002
Name
Code
Quantity
Approx Value
Select
COPPER WIRE ROD
Physical Verification needed
Description
COPPER WIRE ROD 7.9/8MM DIA AS PER SPECIFICATION IS 12444:1988
Specification
COPPER WIRE ROD 7.9/8MM DIA AS PER SPECIFICATION IS 12444:1988
Drawing no.
SPECIFICATION IS 12444:1988
Manufacturing Technology
Refer to attachment AS PER ATTACHMENT. AS PER ATTACHMENT. AS PER ATTACHMENT. AS PER ATTACHMENT.
Testing / Inspection Facility
Refer to attachmentAS PER ATTACHMENT. AS PER ATTACHMENT. AS PER ATTACHMENT. AS PER ATTACHMENT. AS PER ATTACHMENT.
70
105579.24
Kilogram
OILER HAND NO1 MK1 MAG GUN
Description
OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001
Specification
OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001
Drawing no.
DS-CATNO.4930-000799
Manufacturing Technology
Machining and Fabrication work
Testing / Inspection Facility
Chemical and Mechanical prosperities as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
71
1267
Number
SECONDRY REFIND AOD VOD QUALITY STEEL ROD 46MM DIA FOR MAG
Description
SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46 MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET- CH TESTING TO CON IS 13015:1991 & NMIR TEST (ANNEXURE-A ENCL)
Specification
SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET- CH TESTING TO CON IS 13015:1991 & NMIR TEST (ANNEXURE-A ENCL)
Drawing no.
SPECIFICATION JSS 9510-06:2000 (REV NO.3)CODE REF "B"
Testing / Inspection Facility
Chemical and Mechnacial properties as per std.given drawing
03
3934
Kilogram
QUICK RELEASE CONNECTOR FOR PILOT PARA JAGUAR A C
Description
QUICK RELEASE CONNECTOR (FOR PILOT PARA JAGUAR A/C.)
Specification
SPCN.NO.AS PER ADRDE/1455
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110075020
92
Number
JEWELL TO DRG NO MCT 794
Physical Verification needed
Description
JEWELL TO DRG. NO. MCT-794.
Specification
JEWELL TO DRG. NO. MCT-794.
Manufacturing Technology
As per Sl No. 48 of Annexure-A of OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019
Testing / Inspection Facility
As per Sl No. 48 of Annexure-A of OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019
48
21
Number
SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB
Description
SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
Specification
SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
Drawing no.
DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
27086
Number
SPRING SPECIAL PURPOSE AS PER FOR FIRING DEVICE IB
Description
SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB
Specification
SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB
Drawing no.
DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713
Manufacturing Technology
Spring Manufacturing Machine
Testing / Inspection Facility
-Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
17127
Number
Nut Castellated Hexagon
Description
NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE
Specification
NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE
Drawing no.
DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
39239
Number
Testing Device Circuit Continuity 1 BAS
Description
Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429
Item Code-7012907618)
Specification
Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429
Item Code-7012907618)
Manufacturing Technology
Electrical Testing Equipment( Molding Machingh Electrical tech & Assy.,
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
7647
Number