ZINC WIRE 2 MM DIA

ZINC WIRE 2 MM DIA.IN LINE TO LINE SPOOL 15 KG , GRADE Z 2 AS PER SPECN.BSEN 1179:2003, 99.99% PURITY.

NA

• 1.Melting furnace set 2. Wire rolling machine 3. Wire butt welding machine 4. Wire drawing machines (Horizontal/vertical) 5. Arrangement for in line to line spool packing of 15 Kgs

• 1.Melting furnace set 2. Wire rolling machine 3. Wire butt welding machine 4. Wire drawing machines (Horizontal/vertical) 5. Arrangement for in line to line spool packing of 15 Kgs

VARNISH STOVING OIL GR.1 221)

VARNISH OIL STOVING(AMMUNITION PROTECTIVE COMPOSITION NO.-221]GR. I SPECIAL TO SPECN.JSS-8010-28:1997(REVISION -NO.1(1) COLOUR OF VARNISH AFTER BAKEING -BROWN. (2)VISCOSITY - TO SUIT MODE OF APPLICATION ie -BRUSHING &/OR DIPPING.FIRM WILL SUPPLY MATERIAL IN STAGGER DELIEVERY SCHED FIRM WILL SUPPLY MATERIAL IN STAGGER DELIEVERY SCHEDULE PROVIDED BY OFM

NA

• Attritor/Mill/disperser.Bead Crusher/Ball Mill Mixer and thinner varnish kettle (Rector) A well-equipped state of art laboratory is mandatory for checking all the parameters and ensuring quality of paints and varnish.

• Attritor/Mill/disperser.Bead Crusher/Ball Mill Mixer and thinner varnish kettle (Rector) A well-equipped state of art laboratory is mandatory for checking all the parameters and ensuring quality of paints and varnish.

PAINT RED OXIDE IS-2074-1992

READY MIXED PAINT AIR DRYING RED OXIDE ZINC CHROME PRIMING TO SPECN.IS:2074-1992.

NA

• Attritor/Mill/disperser.Bead Crusher/Ball Mill Mixer and thinner varnish kettle (Rector) A well-equipped state of art laboratory is mandatory for checking all the parameters and ensuring quality of paints and varnish.

• Stirrer.Thermoheater.

PAINT RMAD BUFF MIDDLE SPRAYIN

PAINT R.M AIR DRYING SEMI GLOSSY FINISH ISC-359 OF IS-5 2007 BUFF MIDDLE SPRAYING TO SPECN IS-168-1993 [IIIrd REVISION ADDITIONAL REQUIREMENTS TO IS-168-1993 AS APPLICABLE FOR DEFENCE USE,VISCOSITY OF PAINT SHOULD BE SUITABLE FOR USE WITH SPRAYING GUN.

NA

• Attritor/Mill/disperser.Bead Crusher/Ball Mill Mixer and thinner varnish kettle (Rector) A well-equipped state of art laboratory is mandatory for checking all the parameters and ensuring quality of paints and varnish.

• Stirrer.Thermoheater.

R.M.PAINT DEEP BRONZE GREEN.

READY MIXED PAINT AIR DRYING MATT.BRUSHING{ISC224 IS:5-2007 DEEP BRONZE GREEN}TO SPECN.IS-168-1993 [AS APPLICABLE FOR DEFENCE USE]. FIRM WILL SUPPLY MATERIAL IN STAGGER DELIEVERY SCHEDULE PROVIDED BY OFM

NA

• Attritor/Mill/disperser.Bead Crusher/Ball Mill Mixer and thinner varnish kettle (Rector) A well-equipped state of art laboratory is mandatory for checking all the parameters and ensuring quality of paints and varnish.

• Stirrer.Thermoheater.

PAINT RMADS/GL.GREEN BRUNSWICK

PAINT READY MIXED AIR DRYING SEMI GLOSSY FOR GENERAL PURPOSE GREEN BRUNSWICK LIGHT ISC-225 OF IS-5-2007 SPRAYING TO SPECN.IS-168-1993 (AS APPLICABLE FOR DEFENCE USE).

NA

• Attritor/Mill/disperser.Bead Crusher/Ball Mill Mixer and thinner varnish kettle (Rector) A well-equipped state of art laboratory is mandatory for checking all the parameters and ensuring quality of paints and varnish.

• Stirrer.Thermoheater.

PAINT TURQUOISE BLUE

PAINT R.M.AIR DRYING MATT.BRUSHING TURQUOISE BLUE ISC.NO-102 OF IS-5-2007 TO SPECN.IS-168-1993 THIRD REVISION {AS APPLICABLE FOR DEFENCE USE}.FIRM WILL SUPPLY MATERIAL IN STAGGER DELIEVERY SCHEDULE BY OFM

NA

• Attritor/Mill/disperser.Bead Crusher/Ball Mill Mixer and thinner varnish kettle (Rector)A well-equipped state of art laboratory is mandatory for checking all the parameters and ensuring quality of paints and varnish.

• Stirrer.Thermoheater.

REDY MIXED WHITE AIR DRYING

PAINT R.M. AIR DRYING SEMI GLOSSY FINISH WHITE BRUSHING TO = SPECN:IS:168-1993 SECOND REVISION WITH AMENDMENT NO 1&2 {AS APPLICABLE FOR DEFENCE USE.

NA

• Attritor/Mill/disperser.Bead Crusher/Ball Mill Mixer and thinner varnish kettle (Rector)A well-equipped state of art laboratory is mandatory for checking all the parameters and ensuring quality of paints and varnish.

• Stirrer.Thermoheater.

ALUMINIUM PURE INGOT

ALUMINIUM PURE INGOT 99% PURE TO SPECIFICATION IS-617-1994 DESIGNATION 1900 WEIGHT OF INGOT -ONE KG APPROXIMATE OR PRIMARY ALUMINIUM INGOTS WITH MINIMUM ALUMINIUM CONTENT OF 99.7% GRADE-1 TO SPECN.IS:2590-1987 CAST AS NOTCHED BAR/SLAB EACH WEIGHING 20 KG APPROXIMATELY

NA

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorized Dealers/Traders/PSU's

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorized Dealers/Traders/PSU's

Steel Scrap`B'

STEEL SCRAP "B." IN THE FORM OF END PICES OF BILLETS REJECTED FORGINGS & SHELL (STEEL SCRAP LM IN FORM OF REJECTED SHELLS / FORGING / END PCS OF STEEL BILLETS / CUTTING RING OF SHELLS etc.

NA

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorized Dealers/Traders/PSU's

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorized Dealers/Traders/PSU's

CAST IRON SCRAP GR. I

CAST IRON SCRAP GR. I.

NA

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorized Dealers/Traders/PSU's

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorized Dealers/Traders/PSU's

PIG IRON GR-I

PIG IRON FOR FOUNDRY PURPOSE AS PER IS 13502-1992 DESIG PG SI XMN3 P-40,SI>0.75 BUT<1.25,GR 3.4 (MASS OF PIG-22.5 KGS.HAVING ONE NOTCH

NA

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorized Dealers/Traders/PSU's

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorized Dealers/Traders/PSU's

FERRO VANADIUM LOW CARBON

FERRO VANADIUM LOW CARBON AS PER IS-1466-1985 GR.FeV 55.THE EVALUATION OF COST WITH 50% VANADIUM CONTENT AS BASE PLUS PRORATA BASIS.HOWEVER SIZE OF LUMPS:10MM TO 50MM WITH FINES NOT EXCEEDING 10% MAX.

NA

• No Specific technology can be required prepared for manufacturing/ production of these items as these are general items and can be purchased from OEM's/ Authorized Dealers/Traders/PSU's

• No Specific technology can be required prepared for manufacturing/ production of these items as these are general items and can be purchased from OEM's/ Authorized Dealers/Traders/PSU's

FERRO SILICON

FERRO SILICON IS:1110-1999 [FOURTH REVISION] GRADE FeSi73Al -15 [LUMP-SIZE 50 TO 150MM],CONSTITUTION OF CONSIGNMENT-LOT METHOD.

NA

• No Specific technology can be required prepared for manufacturing/ production of these items as these are general items and can be purchased from OEM's/ Authorized Dealers/Traders/PSU's

• No Specific technology can be required prepared for manufacturing/ production of these items as these are general items and can be purchased from OEM's/ Authorized Dealers/Traders/PSU's

FERRO MANGANESE MEDIUM CARBON

FERRO MANGANESE MEDIUM CARBON TO SPECN. IS : 1171-2011 GARDE MEDIUM CARBON DESIGNATION 2FeMn 76 SIZE OF LUMP 50 TO 150MM DULY PACKED IN STEEL DRUM AND DRUM MUST BE CLEARLY MARRKED THE GRADE OF MATERIAL WITH SUPPLIER 'S NAME.

NA

• No Specific technology can be required prepared for manufacturing/ production of these items as these are general items and can be purchased from OEM's/ Authorized Dealers/Traders/PSU's

• No Specific technology can be required prepared for manufacturing/ production of these items as these are general items and can be purchased from OEM's/ Authorized Dealers/Traders/PSU's

FERRO MOLYBEDENIUM TO IS 1469-

FERRO MOLYBDENUM LOW CARBON LUMPS BETWEEN 15 TO 25 MM. GRADE FeMo-63 -C10 TO IS-1469 -- 1993. PACKING-MATERIAL SHALL BE SUPPLIED IN STEEL DRUM OF 50/100 KGs.CAPACITY.EVALUATION OF COST ON 60% MOLYBDENUM MINIMUM AS BASE PLUS PRORATA BASIS UPTO 65%.

NA

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorized Dealers/Traders/PSU's

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorized Dealers/Traders/PSU's

FERRO MANGANESE HIGH CARBON

FERRO MANGANESE HIGH CARBON TO SPECN.IS-1171-2011 GR FE MN 68 LUMP SIZE 50 TO 150MM DULY PACKED IN SECOND HAND M.S DRUM SHALL BE MARKED WITH THE GD. OF MATERIAL WITH SUPPLIER S NAME AS GIVEN IN IS:1171-2011(UNDER PACKING).

NA

• No Specific technology can be required prepared for manufacturing/ production of these items as these are general items and can be purchased from OEM's/ Authorized Dealers/Traders/PSU's

• No Specific technology can be required prepared for manufacturing/ production of these items as these are general items and can be purchased from OEM's/ Authorized Dealers/Traders/PSU's

FERRO CHROME(L.C.

FERRO CHROMIUM LOW CARBON AS PER IS 1170-1992 GRADE 09 -DESIGN. 008 FE CR-64 WITH FOLLOWING CONDITIONS SIZE FROM -10 TO 100 MM PACKING MATERIAL SHOULD BE SUPPLIED IN STEEL DRUM OF 100 KG CAPACITY. EVALUATION ON 60% CR MIN PLUS PRORATA BASIS.

NA

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorised Dealers/Traders/PSU's

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorised Dealers/Traders/PSU's

FERRO CHROME HIGH CARBON

FERRO CHROMIUM HIGH CARBON AS PER IS-1170-1992 GR.NO2,DESIGN -ATION 5FE CR 65 ( SI - 1.5 TO 4% ) BUT CARBON 4% TO8% SIZE OF PIECE =50 MM TO 100MM MATERIAL SHOULD BE SUPPLIED IN STEEL DRUM OF 100 KGS CAP.EVALUATION OF COST ON 60% CROMIUM MINIMUM BASE PLUS PRORATA BASIS.

NA

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorised Dealers/Traders/PSU's

• No Specific technology can be required prepared for manufacturing/production of these items as these are general items and can be purchased from OEM's/Authorised Dealers/Traders/PSU's

O RING I.D 38.0.250KG

O RING I.D. 38.0 MM ,DIA WITH DIA 3.5 MM AS THICK TO SPECN IND/ME/884(PROV)C3 FOR 250 KG HSLD BOMB.

NA

• O RING I.D. 38.0 MM ,DIA WITH DIA 3.5 MM AS THICK TO SPECN IND/ME/884(PROV)C3 FOR 250 KG HSLD BOMB.

• 1. Injection moulding machine 2. Mixing/blending machine

NEOPRENE RUBBER WASHER 450 KG

WASHER NEOPRENE RUBBER SPECN. IND/ME/884 [PROV] C3 TO DRG.NO. ARDE 2122 DET 15. [DRG. ENCLOSED FOR DIMENSION ONLY

ARDE 2122 DET 15

• 1. Punching press (Machine/hand press) 2. Sheet forming machine 3. Mixing/blending machine

• Mechanical testing facilities

WASHER [RUBBER] 250KG BOMB

WASHER AS PER DRG. NO. ARDE 9501 -01 DET 12 TO SPECN. NEO-PRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED].FOR 250 KG HSLD BOMB.

ARDE 9501 -01 DET 12

• Punching press (Machine/hand press)
• 1. Sheet forming machine 2. Mixing/blending machine

• Mechanical testing facilities

WASHER FOR NOSE PLUG

WASHER FOR NOSE PLUG ARM-1049B.MATERIAL-NEOPRENE RUBBER TO IND/ME/884 (PROV) C-50,DC NO.3751-ME DATED 12-12-2002, OUTER DIA 101.60MM,INNER DIA 33.00MM AND THICKNESS 1.60MM.

ARM-1049B

• 1 Punching press (Machine/hand press) 2. Sheet forming machine 3. Mixing/blending machine

• Mechanical testing facilities

WASHER TO DRG. NO. 1172 A 17.

WASHER TO DRG. NO. ARM 1172 A 17 MATERIAL NEOPRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED FOR DIMENSIONS ONLY

ARM 1172 A 17

• 1. Punching press (Machine/hand press) 2.Sheet forming machine 3. Mixing/blending machine

• Mechanical testing facilities

TRIPOD X 155 CWC 241 FOR 155 MM 45 CAL GUN DHANUSH

TRIPOD X 155 CWC 241 FOR 155 MM 45 CAL GUN DHANUSH

CWC 241

• FABRICATION
• MACHINING

• VERNIER
• HEIGHT GAUGE
• THICKNESS GAUGE

PROTECTING RING ASSEMBLY

PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING TO DRG. NO. 1460D. R.NO. 9 DTD. 03-11-17 {NOTE:- TO COVER UP ASSEMBLY REJECTION ITEM NO.4 SHOULD BE SUPPLIED 5% EXTRA} [DRG. ENCLOSED].

1460D. R.NO. 9 DTD. 03-11-17

• 1. Adequate hydraulic press machine (min. 200 ton) for Fabrication (sheet metal work) 2. Welding

• 1.    Rolling die (locking screw, plates), 2. Testing facilities as per relevant drawing.

CONTAINER EXPLODER 1000 LBS

CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED]

1460D. R.NO. 9 DTD. 03-11-17

• 1. Adequate hydraulic press machine (min. 200 ton) for Fabrication (sheet metal work) 2. Welding

• 1.    Rolling die (locking screw, plates), 2. Testing facilities as per relevant drawing.

BASE TRANSIT (MCD)450KG

BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED]

ARDE-2122 DET-16

• 1. Forging hammer (min. 1 ton) of adequate capacity 2. Centre Lathe/CNC Lathe 3. Drilling Machine

• 1.    Chemical testing facility, 2. Mechanical testing facility (UTS, YS, elongation , harness)

BASE TRANSIT [MCD W/O SUR] 250 KG

BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB

ARDE/9501 -01 DET -13

• 1. Forging hammer (min. 1 ton) of adequate capacity 2. Centre Lathe/CNC Lathe 3. Drilling Machine

• 1.    Chemical testing facility, 2. Mechanical testing facility (UTS, YS, elongation , harness)

BASE TRANSIT [MCD].1000 LBS

BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED].

ARM-1172C20

• 1. Forging hammer (min. 1 ton) of adequate capacity 2. Centre Lathe/CNC Lathe 3. Drilling Machine

• 1.    Chemical testing facility, 2. Mechanical testing facility (UTS, YS, elongation , harness)

RING NUT [MCD]450 KG

RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED].

ARDE 2122 DET NO. 9.

• 1. Forging hammer (min. 1 ton)of adequate capacity 2. Horizontal Milling Machine/Vertical Milling Machine/Vertical Machining Centre 3. Centre Lathe/CNC Lathe 4. Bench Drilling Machine

• 1. Chemical testing facility 2. Mechanical testing facility (UTS, PS, elongation , harness, impact) 3. Heat treatment facility

R.NUT[MCD W/O SUR) 250 KG BOMB

RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.

ARDE/9501 -01 DET - 6.

• 1. Forging hammer (min. 1 ton)of adequate capacity 2. Centre Lathe/CNC Lathe,3. Horizontal Milling Machine/Vertical Milling Machine/Vertical Machining Centre,4. Bench Drilling Machine.

• 1.    Chemical testing facility, 2. Mechanical testing facility (UTS, PS, elongation , harness, impact),3. Heat treatment facility.

RING NUT ARM 1172 B 4 (MCD).

RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED].

ARM-1172B4 (MCD)

• 1. Forging hammer (min. 1 ton)of adequate capacity 2. Centre Lathe/CNC Lathe,3. Horizontal Milling Machine/Vertical Milling Machine/Vertical Machining Centre,4. Bench Drilling Machine.

• 1.Chemical testing facility, 2. Mechanical testing facility (UTS, YS, elongation , harness)

FORGING FOR LUG 243 AS PER DRG

FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.

OFM-32616A

• Forging hammer (min. 1 ton)of adequate capacity

• 1. Chemical testing facility, 2. Mechanical testing facility (UTS, YS, elongation , harness, fatigue testing, load test), 3. Grain flow test

FORGING FOR LUG 318

FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738B TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A".(DRGS.,TERMS AND CONDITION ENCLOSED)

• Forging hammer (min. 1 ton)of adequate capacity

• 1. Chemical testing facility 2. Mechanical testing facility (UTS, YS, elongation, harness, load test),3. Grain flow test

THRUSTER PLATE.

FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. (DRG. ENCLOSED).

OFM - 32615

• Forging hammer (min. 1 ton)of adequate capacity

• 1. Chemical testing facility 2. Mechanical testing facility (UTS, YS, elongation , harness)

FILLING PLUG FORGING 1000 LBS

FILLING PLUG FORGING TO DRG. NO. OFM/32788. [DRG.ENCLOSED].

• Forging hammer (min. 1 ton) of adequate capacity

• 1. Chemical testing facility 2. Mechanical testing facility (UTS, YS, elongation , harness)

HEX SOCKET SET SCREW M5[450KG

HEX SOCKET SET SCREW M 5 X 8 -(IS:6094- Pt-4,2006-CP)

NA

• 1.       Screw making machine (SPM) or Forging & turning/thread rolling/thread forming machine

• Mechanical, metallurgical and chemical testing facilities.

HEX SOCKET HD CAP SCREW M6X25

HEX. SOCKET HEAD CAP SCREW M 6 X 25 TO SPECN. IS 2269:2006 [FOR RING NUT].

NA

• 1.       Screw making machine (SPM) or Forging & turning/thread rolling/thread forming machine

• Mechanical, metallurgical and chemical testing facilities.

HEX SOCKET SET SCREW(BT 450KG)

HEX SOCKET SET SCREW M 12 X 1.75 PITCH X 25- (IS:- 6094-Pt-4:2006-CP)

NA

• 1.       Screw making machine (SPM) or Forging & turning/thread rolling/thread forming machine

• Mechanical, metallurgical and chemical testing facilities.

HEX SOCKET SET SCREW [450 KG.

HEX SOCKET SET SCREW M5 X 10 (IS-6094-2006-PT-4,CP).

NA

• 1.       Screw making machine (SPM) or Forging & turning/thread rolling/thread forming machine

• Mechanical, metallurgical and chemical testing facilities.

NOSE PLUG [MCD] ARDE 2122.450K

NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED].

ARDE 2122 DET NO. 7

• 1. Forging hammer (min. 1 ton)of adequate capacity 2. Horizontal Milling Machine/Vertical Milling Machine/Vertical Machining Centre 3. Centre Lathe/CNC Lathe

• 1. Chemical testing facility, 2. Mechanical testing facility (UTS, PS, elongation , hardness, impact), 3. Heat treatment facility

NOSE PLUG W/O PHOSPHATED 250 KG

NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED]

ARDE 9501-01 DET 14

• 1. Forging hammer (min. 1 ton)of adequate capacity 2. Centre Lathe/CNC Lathe 3. Horizontal Milling Machine/Vertical Milling Machine/Vertical Machining Centre

• 1. Chemical testing facility 2. Mechanical testing facility (UTS, PS, elongation , hardness, impact),3. Heat treatment facility.

GASKET IN VALCUNISED CHLOROPRENE RUBBER COMPOUND (NEOPRENE) TO SPECIFICATION IND/ME/884 (PROV), CLASS C40 FOR STEEL PACKAGES 120MM ARJUN AMMUNITION AS PER DRG. NO. OFBH/PACKAGE 120 MM/ C/2113. NABL TEST CERTIFICATE OR GOVT. ACCREDITED LAB TEST CERTIFICATE REQUIRED AS PER TEST REQUIREMENT MENTIONED IN IND/ME/884 PROV CLASS C 40

GASKET IN VALCUNISED CHLOROPRENE RUBBER COMPOUND (NEOPRENE) TO SPECIFICATION IND/ME/884 (PROV), CLASS C40 FOR STEEL PACKAGES 120MM ARJUN AMMUNITION AS PER DRG. NO. OFBH/PACKAGE 120 MM/ C/2113. NABL TEST CERTIFICATE OR GOVT. ACCREDITED LAB TEST CERTIFICATE REQUIRED AS PER TEST REQUIREMENT MENTIONED IN IND/ME/884 PROV CLASS C 40

OFBH/PACKAGE 120 MM/ C/2113

• OFBH/PACKAGE 120 MM/ C/2113

• TO SPECIFICATION IND/ME/884 (PROV)

NOSE PLUG ARM-1049B(1000 LBS)

NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED].

ARM - 1049B.

• 1. Forging hammer (min. 1 ton)of adequate capacity 2. Centre Lathe/CNC Lathe 3. Horizontal Milling Machine/Vertical Milling Machine/Vertical Machining Centre

• 1.    Chemical testing facility, 2. Mechanical testing facility (UTS, YS, elongation , harness)

FILLING PLUG(MCD)450 KG

FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED].

ARDE 2122 DET NO. 10.

• 1. Forging hammer (min. 1 ton) of adequate capacity 2. Centre Lathe/CNC Lathe 3. Horizontal Milling Machine/Vertical Milling Machine/Vertical Machining Centre.

• 1. Chemical testing facility,2. Mechanical testing facility (UTS, PS, elongation , harness, impact), 3. Heat treatment facility.

FIL.PLUG[MCD W/O SUR)250 KG

FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.

• 1. Forging hammer (min. 1 ton) of adequate capacity 2. Centre Lathe/CNC Lathe 3. Horizontal Milling Machine/Vertical Milling Machine/Vertical Machining Centre.

• 1. Chemical testing facility,2. Mechanical testing facility (UTS, PS, elongation , harness, impact), 3. Heat treatment facility.

HEX SCREW METRIC THREAD ZINC PLATED ARTICLE NO.10648328 BOF STD NO N2-140-5X14/16

HEX SCREW METRIC THREAD ZINC PLATED ARTICLE NO.10648328 BOF STD NO N2-140-5X14/16

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

HEXAGON SCREW,METRIC SCREW THREAD,STRENGTH GRADE 8.8 ZINC PLATED N2-140-8X25 TO ARTICLE NO.10648453

HEXAGON SCREW,METRIC SCREW THREAD,STRENGTH GRADE 8.8 ZINC PLATED N2-140-8X25 TO ARTICLE NO.10648453

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

HEX.SCREWS METRIC SCREW THERADS STRENGTH GRADE 8.8 ZINC PLATED ART NO 10648331 BOF STD NO N2-140-M5X20

HEX.SCREWS METRIC SCREW THERADS STRENGTH GRADE 8.8 ZINC PLATED ART NO 10648331 BOF STD NO N2-140-M5X20

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

HEXAGONE SCREW METRIC SCREW THREADS STRENGTH GRADE 9.8 ZINC PLATED ART NO.10648493 BOF STD N2-140-10-25

HEXAGONE SCREW METRIC SCREW THREADS STRENGTH GRADE 9.8 ZINC PLATED ART NO.10648493 BOF STD N2-140-10-25

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

HEXAGON SCREW METRIC SCREW THREADS STRENGTH GRADE 8.8 ZINC PLATED ART.NO 10648532 BOF STD N2-140-12X20

HEXAGON SCREW METRIC SCREW THREADS STRENGTH GRADE 8.8 ZINC PLATED ART.NO 10648532 BOF STD N2-140-12X20

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

HEXAGON SCREW METRIC SCREW THEARDS STRENGTH GRADE 8.8 ZINC PLATED ART.NO 10648538 BOF STD N2-140-12X35

HEXAGON SCREW METRIC SCREW THEARDS STRENGTH GRADE 8.8 ZINC PLATED ART.NO 10648538 BOF STD N2-140-12X35

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

HEXAGON SOCKET HEAD CAP SCREWS,METRIC SCREW THREADS,PROPERTY CLASS 12-9 UNTREATED BLACK ARTICLE NO.10809540.BOFORS STD.N2 161 (12X40)

HEXAGON SOCKET HEAD CAP SCREWS,METRIC SCREW THREADS,PROPERTY CLASS 12-9 UNTREATED BLACK ARTICLE NO.10809540.BOFORS STD.N2 161 (12X40)

• AS PER T E DOCUMENT ANN L

• AS PER T E DOCUMENT ANN L

ROUND HEAD DRIVE SCREWS BOFORS STD NO N2-94 0X5 TO ART 10414120

ROUND HEAD DRIVE SCREWS BOFORS STD NO N2-94 0X5 TO ART 10414120

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

PLUG FOR LUG HOUSING 250KG

PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED]

ARDE 9501-01 DET 5 SHT No 1

• Centre Lathe/CNC Lathe, Bench Drilling Machine

• Chemical testing facility

PLUG[MCD][SURFACE TREATED]450

PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED].

ARDE 2122 DET 14.

• 1. Hammer/ press forging facility or 2. Centre Lathe/CNC Lather 3. Milling Machice

• 1. Electro Plating(cadmium plating) 2. Chemical testing facility 3. Mechanical testing facility (UTS,YS, elongation, hardness) 4. Cadmium testing

PLUG [SURFACE TREATED

PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED][DRG. ENCLOSED] FOR 250 KG HSLD BOMB.

ARDE 9501-01 DET. 11

• 1. Centre Lathe/CNC Lathe, 2. Milling

• 1. Electro Plating(cadmium plating) 2. Chemical testing facility 3. Mechanical testing facility (UTS,YS, elongation, hardness) 4. Cadmium testing

PLUG FASTENING FOR 250 KG

PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED]

ARDE 9501-01 DET 5,SHT. No 2

• 1.    Centre Lathe/CNC Lathe, 2. Bench Drilling Machine

• Chemical testing facility

PLUG A/C34DRG.ARM1172A16(CAD.P

PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED)

ARM 1172A16(MCD)

• 1.    Centre Lathe/CNC Lathe, 2. Horizontal Milling Machine/Vertical Milling Machine/Vertical Machining Centre.

• 1.    Cadmium plating, 2. Chemical testing facility, 3. Mechanical testing facility (UTS, YS, elongation, harness), 4. Cadmium plating testing

LUG HOUSING ASSEMBLY MACHINED

LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 [W/O SURFACE TREATED.

ARDE-2122 DET-4

• 1. Forging hammer (min. 1 ton)of adequate capacity 2. Horizontal Milling Machine /Vertical Milling Machine/Vertical Machining Centre 3. Centre Lathe/CNC Lathe

• 1. Chemical testing facility 2. Mechanical testing facility (UTS, PS, elongation , harness, impact) 3. Heat treatment facility

LUG HOUUSING HOLDER 250 KG

LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED]

• 1. Forging hammer (min. 1 ton) of adequate capacity 2. Centre Lathe/CNC Lathe 3. Horizontal Milling Machine/Vertical Milling Machine/Vertical Machining Centre

• 1.    Chemical testing facility, 2. Mechanical testing facility (UTS, PS, elongation , harness, impact) 3. Heat treatment facility

LUG HOUSING(W/O PHOS)250KG

LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED]

ARDE 9501 - 01 DET 4 SHT. No. 1

• 1. Forging hammer (min. 1 ton)of adequate capacity 2. Centre Lathe/CNC Lathe

• 1. Chemical testing facility,2. Mechanical testing facility (UTS, PS, elongation , harness, impact),3. Heat treatment facility.

DETONETOR HOLDER (MCD)

DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY.

ARDE 2122 DET-12 FOR 450 KG

• 1. Forging hammer (min. 1 ton) of adequate capacity. 2. Centre Lathe/CNC Lathe 3. Bench Drilling Machine

• 1. Chemical testing facility 2. Mechanical testing facility (UTS, YS, elongation, hardness, impact).

DET. HOLDER [MCD]450 KG/250 KG

DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED

ARDE 9501-01 DET - 9.

• 1. Forging hammer (min. 1 ton) of adequate capacity. 2. Centre Lathe/CNC Lathe 3. Bench Drilling Machine

• 1. Chemical testing facility 2. Mechanical testing facility (UTS, YS, elongation, hardness, impact).

DETONATOR HOLDER 1000 LBS(MCD)

DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED

ARM 1172B14

• 1. Forging hammer (min. 1 ton) of adequate capacity. 2. Centre Lathe/CNC Lathe 3. Bench Drilling Machine

• 1. Chemical testing facility 2. Mechanical testing facility (UTS, YS, elongation, hardness, impact).

CONTAINER EXPLODER [MCD]450 KG

CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED]

DRG.NO. ARDE - 2122 - DET -11.

• 1. Forging hammer (min. 1 ton)of adequate capacity 2. Centre Lathe/CNC Lathe,3. Bench Drilling Machine.

• Electric arc welding and testing (Welding electrode IS 814), 2. Chemical testing facility,
• Mechanical testing facility (UTS, PS, elongation , harness, impact), Pressure testing, Heat treatment facility

CONT.EXP.[W/O SUR] 250 KG HSLD

CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB

ARDE/9501 - 01 DET - 8.

• 1. Forging hammer (min. 1 ton)of adequate capacity 2. Centre Lathe/CNC Lathe,3. Bench Drilling Machine.

• Electric arc welding and testing (Welding electrode IS 814), 2. Chemical testing facility,
• Mechanical testing facility (UTS, PS, elongation , harness, impact), Pressure testing, Heat treatment facility

COMPLETE POWER PLANT FOR 155 MM

COMPLETE POWER PLANT FOR 155 MM 45CAL FH GUN DHANUSH

• AS PER SCOPE OF WORK

• AS PER TRIAL METHODOLOGY

LOCKING SCREW FOR DETO. HOLDER

LOCKING SCREW (FOR DETONATOR HOLDER) ARM-1172A-31 [ DRG. ENCLOSED]..

ARM-1172A-31

• Screw making machine (SPM) or Forging & turning/thread rolling/thread forming machine

• Mechanical, metallurgical and chemical testing facilities.

SOCKET SET SCREW FOR BASE TRANSIT

SOCKET SET SCREW FOR BASE TRANSIT ARM 1172 A - 32. [DRG. ENCLOSED].

• Screw making machine (SPM) or Forging & turning/thread rolling/thread forming machine

• Mechanical, metallurgical and chemical testing facilities.

LOCKING SCREW FOR CONT. EXPLOD

LOCKING SCREW FOR CONTAINER EXPLODER TO DRG.NO.ARM-1172A-18 [DRG. ENCLOSED].

• Screw making machine (SPM) or Forging & turning/thread rolling/thread forming machine

• Mechanical, metallurgical and chemical testing facilities.

SCREW FOR RING NUT

SCREW FOR RING NUT TO DRG. No. ARM 1172A30 [DRG. ENCLOSED]

DRG. No. ARM 1172A30

• 1.       Screw making machine (SPM) or Forging & turning/thread rolling/thread forming machine

• Mechanical, metallurgical and chemical testing facilities.

INVESTMENT CASTING OF PLATE.5189621

INVESTMENT CASTING OF PLATE.5189621

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

PLATE INVESTMENT CAST MTRL.4088730.

PLATE INVESTMENT CAST MTRL.4088730.

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

PLATE INVEST.CAST. MTRL.5189622.

PLATE INVEST.CAST. MTRL.5189622.

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

HANDLE RT.INVESTMENT CASTING 4076881

HANDLE RT.INVESTMENT CASTING 4076881

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

LEVER INVESTMENT CASTING 4076888

LEVER INVESTMENT CASTING 4076888

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

PLATE INVESTMENT CAST MTRL.5173820.

PLATE INVESTMENT CAST MTRL.5173820.

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

PLATE INVESTMENT CAST MTRL.4089371.

PLATE INVESTMENT CAST MTRL.4089371.

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L