5601
O113-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
UNCOOLED THERMAL ENGINE AS PER SPEC 20 SPEC 21 SPEC 22 AND SPEC 23
Physical Verification needed
Description
UNCOOLED THERMAL ENGINE AS PER SPEC 20 SPEC 21 SPEC 22 AND SPEC 23
Specification
UNCOOLED THERMAL ENGINE AS PER SPEC 20 SPEC 21 SPEC 22 AND SPEC 23
Manufacturing Technology
AS PER OFB LETTER NO. OFB/108/ONLINE VR/QC DTD 12/02/2019, ANNEXURE SL. NO. 62
Testing / Inspection Facility
AS PER OFB LETTER NO. OFB/108/ONLINE VR/QC DTD 12/02/2019, ANNEXURE SL. NO. 62
74
1
Number
5602
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
PLUG BLAKING SINGLE PT IAN 281 SA
Description
PLUG BLAKING SINGLE PT IAN 281 SA
Specification
PLUG BLAKING SINGLE PT IAN 281 SA
Manufacturing Technology
PLUG BLAKING SINGLE PT IAN 281 SA
Testing / Inspection Facility
PLUG BLAKING SINGLE PT IAN 281 SA
90
99
Number
SHAFT CENTRALISING IAN 323 SA
Description
SHAFT CENTRALISING IAN-323 SA
Specification
SHAFT CENTRALISING IAN-323 SA
Manufacturing Technology
SHAFT CENTRALISING IAN-323 SA
Testing / Inspection Facility
SHAFT CENTRALISING IAN-323 SA
90
14
Number
SPACER TO PART NO 5050983
Description
SPACER TO PART NO 5050983
Specification
SPACER TO PART NO 5050983
Testing / Inspection Facility
90
122
Number
5603
110190301
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
WEBBING NYLON 44 MM UD 17800N
Description
WEBBING NYLON 44 MM U/D 17800N
Specification
IS:4727-1968 except for :-
i) Parameters Specification
Page 4, Table picks/dm:140+- 5%
1, Vty. No. 2 No of folds in weft
yarn- 1
iii) Sampling Plan & Criteria of conformity shall be as per CQAT&C/QAI NO. CQAT&C/QAI/TC-8/7(b).
iv) In appearance, workmanship,
finish & all other respects not
defined in this IS Specn. the
material shall conform to the
sealed pattern held in the custody
of the Controller, CQAT&C,
KANPUR.
V) Packing & Marking: As per
schedule No. CIT&C/PMS/41
Testing / Inspection Facility
2101876974
72950
Metre
FEMALE COUPLING FOR CWL
Description
FEMALE COUPLING FOR CWL
Specification
DRG. NO. ADRDE/1344(b)
Drawing no.
DRG. NO. ADRDE/1344(b)
Testing / Inspection Facility
2110075039
56
Number
CORD ELASTIC SHOCK ABSORBAR 10 MM DIA
Description
CORD ELASTIC SHOCK ABSORBAR 10 MM DIA
Specification
SPECN. NO.CIADE/16 (a)
Testing / Inspection Facility
2101119910
222
Metre
WEBBING NYLON 44 MM OG 1815 KG
Description
WEBBING NYLON 44 MM O.G. 1815 KG.
Specification
IS : 4727-2020 V. No. 2 with Amendment No. 1 August 2022 Except that : – Shade should be as per approved sample held with QCM/OPF.
Testing / Inspection Facility
2101877081
10855.60
Metre
5604
3193000956
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
WOODEN CHEST MG2B FOR MAG
Description
DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001
Specification
DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001
Drawing no.
DS CAT-5140-000288 DC(I)NO 25075 SA DATED 16-07-2001
Manufacturing Technology
Carpentry and related work
Testing / Inspection Facility
Chemical and Mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
70
412
Number
STEEL FORGING TO FOR BLOCK FRONT OF MAG
Description
STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM
Specification
STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM
Testing / Inspection Facility
Chemical and Mechanical properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
01
360
Number
Trigger guard
Specification
AS PER DRG. DS CAT No. 1005-00060
Manufacturing Technology
Machining and anodizing and Dying
Testing / Inspection Facility
Chemical and Mechanical properties as per std.given drawing Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing
70
353
Number
PRIMER MAGAZINE ASSEMBLY NO 4091303D
Description
PRIMER MAGAZINE ASSEMBLY NO 4091303D
Specification
PRIMER MAGAZINE ASSEMBLY NO 4091303D
Manufacturing Technology
As per tender document Annexure L
Testing / Inspection Facility
As per tender document Annexure L
90
150
Number
5605
OFMK/TM/OTE/V427719
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
Name
Code
Quantity
Approx Value
Select
Turret Electrical Wires 675 97 CB5
Description
Turret Electrical Wires 675 97 CB5
Specification
Turret Electrical Wires 675 97 CB5
Manufacturing Technology
Please refer tender documents & drawings and specifications.
Testing / Inspection Facility
Please refer tender documents & drawings and specifications.
97
10
Set
Body Trigger for MAG
Description
BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
Specification
BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
Drawing no.
DS CAT NO. 1005-006855
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
61
962
Number
HAND PUMP WITH ASSY 1153918D TO DRG NO GCF 50 40159
Description
HAND PUMP WITH ASSY. 1153918D TO DRG. NO. GCF/50/40159
Specification
HAND PUMP WITH ASSY. 1153918D TO DRG. NO. GCF/50/40159
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
19
Number
5606
2019000129
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
Double Layer Bonded Polyester Fleece in OG Colour 145cm width Min
Description
Double Layer Bonded Polyester Fleece in OG Colour 145cm width Min SPECN No. - PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009 /TC-19. AS PER CQA(T&C)/PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO. CQA(T&C)/QAI/99 TC-11
Specification
Double Layer Bonded Polyester Fleece in OG Colour 145cm width Min SPECN No. - PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009 /TC-19. AS PER CQA(T&C)/PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO. CQA(T&C)/QAI/99 TC-11
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
11988
Metre
Synthetic Plastic Slide Fasteners Special Purpose Closed End Medium Size 45 cms White
Description
Synthetic Plastic Slide Fasteners Special Purpose Closed End Medium Size 45 cms White SPECN:- IS: 14181 (Part 1 to 3) :2002 AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION
Specification
Synthetic Plastic Slide Fasteners Special Purpose Closed End Medium Size 45 cms White SPECN:- IS: 14181 (Part 1 to 3) :2002 AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
10100
Number
Synthetic Plastic Slide Fasteners Special Purpose Closed End Medium Size 40 cms White
Description
Synthetic Plastic Slide Fasteners Special Purpose Closed End Medium Size 40 cms White SPECN:- IS: 14181 (Part 1 to 3) :2002 AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION
Specification
Synthetic Plastic Slide Fasteners Special Purpose Closed End Medium Size 40 cms White SPECN:- IS: 14181 (Part 1 to 3) :2002 AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
32824
Number
Synthetic Plastic Slide Fasteners Special Purpose Closed End Medium Size 35 cms White
Description
SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 35 CMS WHITE SPECN:- IS: 14181 (Part 1 to 3) :2002 AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION
Specification
SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 35 CMS WHITE SPECN:- IS: 14181 (Part 1 to 3) :2002 AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
7575
Number
5607
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
20mm Bolt Assembly to Drg No 44P03000 required for AMR
Description
20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),
Specification
20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),
Testing / Inspection Facility
20
10
Number
WALLET SA SPARE PARTS AND TOOLS NO 2 MK 1 EMPTY
Description
WALLET SA SPARE PARTS & TOOLS NO. 2 MK- 1(EMPTY) DS CAT NO. 1005 - 000765 DC(I) NO.25052-SA DT.28/06/2001 FINISHED CONDITION 4 SHTS.
Specification
WALLET SA SPARE PARTS & TOOLS NO. 2 MK- 1(EMPTY) DS CAT NO. 1005 - 000765 DC(I) NO.25052-SA DT.28/06/2001 FINISHED CONDITION 4 SHTS.
Drawing no.
DS CAT NO. 1005 - 000765 DC(I) NO.25052-SA
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
70
920
Number
5608
HVF/TE0102190209/2019-20/TA/CBOI/SD-OTE dt 03/02/2020
Heavy Vehicle Factory
The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
COVER TO DRG NO 175 03 006 1A LF 6106802068
Description
COVER TO DRG NO 175.03.006-1A/PL LF 6106802068
Specification
SERVICE ASSISTANCE
Drawing no.
175.03.006-1A/PL
Manufacturing Technology
AS PER SCOPE OF WORK AND VENDOR QUALIFICATION CRITERIA
Testing / Inspection Facility
AS PER VENDOR QUALIFICATION CRITERIA
61
100 Nos
Number
BUCKLE STEEL 48 MM BLACK EPOXI PAINTED
Description
BUCKLE STEEL 48 MM BLACK EPOXI PAINTED
Specification
SPCNS: PLATE-7 OF DRG. ATTACHED WITH SPECN. NO. DMSRDE/T&GS/93/410(b)
Testing / Inspection Facility
2110039013
21479
Number
BUCKLE STEEL 38 MM BLACK EPOXI PAINTED
Description
BUCKLE STEEL 38 MM BLACK EPOXI PAINTED
Specification
PLATE NO. 8 OF DRAWING ATTACHED WITH SPECIFICATION NO. DMSRDE/T&GS/93/410(b)
Testing / Inspection Facility
2110039014
11675
Number
BUCKLE PLASTIC 48 MM BLACK
Description
BUCKLE PLASTIC 48 MM BLACK
Specification
SPECIFICATION: PLATE NO. 6 OF DRAWING ATTACHED WITH SPECIFICATION NO. DMSRDE/T&GS/93/410(b)
Testing / Inspection Facility
2110039017
21627
Number
BUCKLE PLASTIC QUICK RELEASE 40 MM BLACK
Description
BUCKLE PLASTIC QUICK RELEASE 40 MM BLACK
Specification
SPCNS. NO. DMSRDE/T&GS/93/406
Testing / Inspection Facility
2110039016
5399
Number
NIV TRIANGULAR D RING
Description
NIV TRIANGULAR D RING
Specification
DRAWING NO. CQA(GS)/US/560
Testing / Inspection Facility
2010020005
4692
Number
FABRICATION OF SOCKS BLACK
Description
FABRICATION OF SOCKS BLACK.
Specification
i. FABRICATION OF SOCKS BLACK.
ii. THE FABRICATION INCLUDES KNITTING, LINKING, WASHING, PRESSING AND PASSING OPERATION.
iii. FABRICATION OF SOCKS BLACK WILL BE STRICTLY AS PER SPECN AIR HQ/DQAS/AK-037, DS CAT NO 8440-000467 TO 473.
Testing / Inspection Facility
9911035785
54300
Pair
FABRIC NYLON POLYURETHENE COATED 105 GM WHITE WIDTH 100 CM DS Cat No 8305 003 728
Description
FABRIC NYLON POLYURETHENE COATED 105 GM WHITE WIDTH 100 CM ( DS Cat No. 8305-003 728 )
Specification
SPECN NO.: JSS:8305-32:2003
Testing / Inspection Facility
2101221248
10337
Metre
BUCKLE PLASTIC BLACK 38 MM
Description
BUCKLE PLASTIC BLACK 38 MM
Specification
SPCNS: PLATE NO-6 OF DRG. ATTACHED WITH DMSRDE SPECN. NO. DMSRDE/T&GS/93/410(b)
Testing / Inspection Facility
2110039015
16070
Number
STEEL ROD 4 MM DIA
Description
STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.
Specification
STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
03
2675
Kilogram
SECONDRY REFIND AOD VOD QUALITY STEEL ROD 46MM DIA FOR CARBINE 9MM
Description
SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING TO THE SPECIFICTION JSS 9510-06:2012 CODE REF "B" IN HOT ROLLED ,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET-CH TESTING TO CON IS 13015:1991 & NMIR TEST
Specification
SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING TO THE SPECIFICTION JSS 9510-06:2012 CODE REF "B" IN HOT ROLLED ,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET-CH TESTING TO CON IS 13015:1991 & NMIR TEST
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
03
1654
Number
PULL THROUGH 5 point 56 MM 1A NYLON TO DS CAT NO 1005 557944 DC I NO 26532 SA DT 30 07 10
Description
PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Specification
PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Drawing no.
S CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
71
224133
Number
TRIGGER ASSEMBLY TO DS CAT NO 1005 006589
Description
TRIGGER ASSEMBLY TO DS CAT NO 1005 006589 DC(1) NO 26375 SA DT 05/09/07 WITH DETAILS OF LATEST ISSUE INSPECTION TO BE GOVERN BY RELEVANT CLAUSES OF SPECN JSS-1005-04 2006 OF LATE ST ISSUE and ANY OTHER ACCEPTANCE CRITERIA TO BE PROVIDED BY CQA (SA) ISHAPORE
Specification
TRIGGER ASSEMBLY TO DS CAT NO 1005 006589 DC(1) NO 26375 SA DT 05/09/07 WITH DETAILS OF LATEST ISSUE INSPECTION TO BE GOVERN BY RELEVANT CLAUSES OF SPECN JSS-1005-04 2006 OF LATE ST ISSUE and ANY OTHER ACCEPTANCE CRITERIA TO BE PROVIDED BY CQA (SA) ISHAPORE
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
553
Number
FILTER SOLDERING TO DRG BOF 6116637
Description
FILTER SOLDERING TO DRG BOF 6116637
Specification
FILTER SOLDERING TO DRG BOF 6116637
Manufacturing Technology
FILTER SOLDERING TO DRG BOF 6116637
Testing / Inspection Facility
90
126
Number
MOD ENGINE HOUSING TO INTEGRATE CUMMINS ENGINE FOR 155MM FH GUNS
Physical Verification needed
Description
MOD ENGINE HOUSING TO INTEGRATE CUMMINS ENGINE FOR 155MM FH GUNS
Specification
MOD ENGINE HOUSING TO INTEGRATE CUMMINS ENGINE FOR 155MM FH GUNS
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
90
Number
SHAFT TO DRAWING NO 3054134
Physical Verification needed
Description
SHAFT TO DRAWING NO.3054134
Specification
SHAFT TO DRAWING NO.3054134
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
18
Number
SHAFT TO DRAWING NO 3054133
Physical Verification needed
Description
SHAFT TO DRAWING NO.3054133
Specification
SHAFT TO DRAWING NO.3054133
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
18
Number
PROTECTOR RIGHT TO DRG NO 1146579
Description
PROTECTOR RIGHT TO DRG.NO.1146579
Specification
PROTECTOR RIGHT TO DRG.NO.1146579
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
18
Number
PROTECTOR LEFT TO DRAWING NO 1146577
Physical Verification needed
Description
PROTECTOR LEFT TO DRAWING.NO.1146577
Specification
PROTECTOR LEFT TO DRAWING.NO.1146577
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
18
Number
RECOIL INDICATOR TO DRAWING NO 1144034
Physical Verification needed
Description
RECOIL INDICATOR TO DRAWING NO.1144034
Specification
RECOIL INDICATOR TO DRAWING NO.1144034
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
18
Number
LEAF SPRING REAR SIGHT
Physical Verification needed
Description
LEAF SPRING REAR SIGHT
DRG. NO. 0204 03 02 00 01 009 00DC
Specification
LEAF SPRING REAR SIGHT
DRG. NO. 0204 03 02 00 01 009 00DC
Drawing no.
0204 03 02 00 01 009 00DC
Manufacturing Technology
forming forming forming forming forming
Testing / Inspection Facility
Chemical & Mechanical properties as per std. given drawing /Specification. Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification. Chemical & Mechanical properties as per std. given drawing /Specification. Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification. Chemical & Mechanical properties as per std. given drawing /Specification.
70
4889
Number
DISC to Drg No 765 12 342
Description
DISC to Drg No 765-12-342
Specification
mentioned in Attachments and specifications.
Testing / Inspection Facility
12
55
Number
PAWL GUIDE CARTRIDGE for MAG
Description
PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 27022-SA DT.31.01.17
Specification
PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 27022-SA DT.31.01.17
Drawing no.
DS CAT NO. 1005-006626 DC(I) NO. 27022-SA DT.31.01.17
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
70
520
Number
Fore Sight Housing
Description
Fore Sight Housing to DS CAT No. 1005-000426 in without Heat Treatment Condition
Specification
Fore Sight Housing to DS CAT No. 1005-000426 in without Heat Treatment Condition
Drawing no.
DS CAT No. 1005-000426
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
70
646
Number
EXTRACTOR for MAG
Description
EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN.,
Specification
EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN.,
Drawing no.
DS CAT NO.1005-006633
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
70
997
Number
Steel Blank of Cylinder Gas
Physical Verification needed
Description
Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
Specification
Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
01
425
Number
5609
MPF/OTE/19TE211238
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
Multiple Limit Switch 4 Plunger Chisel Type Plunger Spacing 8mm Switching Element ES552 Item Code SN04 D08 552 Make Teknic Control Gear OR equivalent
Physical Verification needed
Description
Multiple Limit Switch 4 Plunger Chisel Type Plunger Spacing 8mm Switching Element ES552 Item Code SN04 D08 552 Make Teknic Control Gear OR equivalent
Specification
Multiple Limit Switch 4 Plunger Chisel Type Plunger Spacing 8mm Switching Element ES552 Item Code SN04 D08 552 Make Teknic Control Gear OR equivalent
Manufacturing Technology
1. Die Casting / Moulding
2. Anodizing Plant
3. Precision Machining
4. Precision Presses
5. Laser Marking for piece parts and finished assemblies
6. The quality assurance process at manufacturing facilities must be ISO 9001 and ISO 14001 certified
Testing / Inspection Facility
Adequate in house test facilities for mechanical & electrical testing of the components, including rubber components
71
84
Number
CASE CARRYING FRP MCT 1678 2
Description
CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56 MM RIFLE AS PER DRG. NO. MCT 1678 2
Specification
CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56 MM RIFLE AS PER DRG. NO. MCT 1678 2
Manufacturing Technology
THE ITEM IS NOT MENTIONED IN ANNEXURE A OF LETTER NO. OFB/108/Online VR/QC dtd. 12.02.2019
Testing / Inspection Facility
THE ITEM IS NOT MENTIONED IN ANNEXURE A OF LETTER NO. OFB/108/Online VR/QC dtd. 12.02.2019
74
14255
Number
5610
2020000014
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
Fabrication of Jacket Wind Cheater
Description
FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1
Specification
FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
15000
Whole job
SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK
Description
SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR]
Specification
SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR]
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
305102
Number
Spring Type Cylindrical Plastic Stopper White
Description
SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR
Specification
SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
379993
Number
5611
3193001083
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Lantern Electric 1A
Specification
AS PER DRG.
Drawing no.
DS CAT No. Y3/6230-000012
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
71
367
Number
5612
190407FHFO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
9081002937 CLAMP RP 971632 CASTING
Physical Verification needed
Description
CLAMP RP 971632 CASTING
Specification
CLAMP RP -971632 CASTING TO DRG. NO. RP 200031
Testing / Inspection Facility
90
49
Number
9081002936 CLAMP RP 971633 CASTING
Physical Verification needed
Description
CLAMP RP 971633 CASTING
Specification
CLAMP - RP 971633 CASTING TO DRG. NO. RP 200032
Testing / Inspection Facility
90
31
Number
9081002935 FORK RP 971629 CASTING
Physical Verification needed
Description
FORK RP 971629 CASTING
Specification
FORK - RP 971629 (CASTING).
Testing / Inspection Facility
90
33
Number
9081002934 BRACKET RP 971634 CASTING
Physical Verification needed
Description
BRACKET RP 971634 CASTING
Specification
BRACKET - RP 971634, CASTING TO DRG. NO. RP200038
Testing / Inspection Facility
90
33
Number
9081000212 BRACKET LEFT CAST9NG DRG NO 5168972
Physical Verification needed
Description
BRACKET LEFT CAST9NG DRG NO 5168972
Specification
BRACKET LEFT CASTING TO DRG.NO.5168972
Testing / Inspection Facility
90
43
Number
9081000189 TRAIL SPADE DRG 3051623
Physical Verification needed
Description
TRAIL SPADE DRG 3051623
Specification
ST.CASTING OF TRAIL SPADE TO DRG.NO.GCF/50/39471(REF DRG NO.
3051623)(WEIGHT OF CASTING SHOULD NOT EXCEED 70 KG
Testing / Inspection Facility
90
45
Number
9081000168 CASTING OF BRACKET DRG 6333961
Physical Verification needed
Description
CASTING OF BRACKET DRG 6333961
Specification
CASTING.OF BRACKET.TO DRG NO.6333961.CONFORMING THE DRG /
NO 6333961.)
Testing / Inspection Facility
90
46
Number
9081000100 HANDLE LEFT INV CASTING 4076880
Physical Verification needed
Description
HANDLE LEFT INV CASTING 4076880
Specification
HANDLE LEFT INVESTMENT CASTING MTRL. TO DRG.NO.4076880
Testing / Inspection Facility
90
67
Number
9077000013 CASTING PISTON GUIDE RING 5160503
Physical Verification needed
Description
CASTING PISTON GUIDE RING 5160503
Specification
CASTING OF PISTON GUIDE RING TO DRG.NO.BOF-5160503 TO SPECN:
IS:1865-91,GD SG 500/7 WITH METALLOGRAPHY TEST
Testing / Inspection Facility
90
188
Number
9077000011 CASTING PISTON GUIDE RING 5139398
Physical Verification needed
Description
CASTING PISTON GUIDE RING 5139398
Specification
CASTING OF PISTON GUIDE RING TO DRG NO. 5139398.
SPHEROIDAL CAST IRON TO SPECN IS:1865-91 GD.SG 500/7
Testing / Inspection Facility
90
52
Number
9077000010 CASTING FOR PISTON GCFMN 5461 E
Physical Verification needed
Description
CASTING FOR PISTON GCFMN 5461 E
Specification
"PISTON" (CASTING) TO DRG NO.GCF-MN-5461(E)(REF DRG NO
4071780) TO SPECN NO:IS:1865-91,(GD SG 500/7
Testing / Inspection Facility
90
14
Number
BODY ASSY DRG NO BSH6 110 050 SB
Physical Verification needed
Description
BODY ASSY. DRG. NO. BSH6.110.050 SB
Specification
AS PER ENCLOSED DRAWING
Drawing no.
BSH6.110.050 SB
Manufacturing Technology
SL. NO. 65 OF ANNEXURE A TO OFB LETTER NO. OFB/108/ONLINE VR/QC DTD. 12.12.2019
Testing / Inspection Facility
SL. NO. 65 OF ANNEXURE A TO OFB LETTER NO. OFB/108/ONLINE VR/QC DTD. 12.12.2019
74
682
Number
BUFFER BODY FOR PLATE BACK ASSY
Description
BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15
Specification
BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15
Drawing no.
DRG.NO.DS CAT NO.1005- 0 06645
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
70
358
Number
LAMP AIMING
Description
LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.
Specification
LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.
Drawing no.
DS CAT NO.1005-000720 (3 SHEETS)
Manufacturing Technology
Optical Manufacturing technology
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing Chemical & Mechanical Properties as per std. given drawing Chemical & Mechanical Properties as per std. given drawing Chemical & Mechanical Properties as per std. given drawing
70
295
Number
SPRING BARREL LOCKING CATCH
Description
SPRING BARREL LOCKING CATCH,DS CAT NO.5360 - 003079 IN F/D CONDITION. DC(I) NO. 25393-SA, DT. 11-06-2002
Specification
SPRING BARREL LOCKING CATCH,DS CAT NO.5360 - 003079 IN F/D CONDITION. DC(I) NO. 25393-SA, DT. 11-06-2002
Drawing no.
DS CAT NO.5360 - 003079
Testing / Inspection Facility
Chemical and Mechanical Properties as per std. given drawing
70
1364
Number
Phosphor Bronze Rod 32 mm Dia
Description
PHOS.BRONZE ROD 32MM DIA TO SPECN.BS:2874:1969 PB102M
Specification
PHOS.BRONZE ROD 32MM DIA TO SPECN.BS:2874:1969 PB102M
Manufacturing Technology
Melting and Rolling Melting and Rolling Melting and Rolling Melting and Rolling Melting and Rolling
Testing / Inspection Facility
Chemical & Mechanical properties as per SPECN. BS:2874:1969 PB102M Chemical & Mechanical properties as per SPECN. BS:2874:1969 PB102M Chemical & Mechanical properties as per SPECN. BS:2874:1969 PB102M Chemical & Mechanical properties as per SPECN. BS:2874:1969 PB102M Chemical & Mechanical properties as per SPECN. BS:2874:1969 PB102M
07
189
Kilogram
SPRING CARTRIDGE GUIDE PAWL FOR MAG
Description
PT.NO.69 DS CAT NO 5360-000518 DC(I) NO.27021-SA DT. 28.01.17 IN FINISHED CONDITION.
Specification
PT.NO.69 DS CAT NO 5360-000518 DC(I) NO.27021-SA DT. 8.01.17 IN FINISHED CONDITION.
Drawing no.
DS CAT NO 5360-000518 DC(I) NO.27021-SA DT.28.01.17
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
70
893
Number
FLOOR PLATE FOR TRAIL SPADES TO DRAWING NO GCF 50 40333
Physical Verification needed
Description
FLOOR PLATE FOR TRAIL SPADES TO DRAWING NO.GCF/50/40333
Specification
FLOOR PLATE FOR TRAIL SPADES TO DRAWING NO.GCF/50/40333
Testing / Inspection Facility
90
96
Number
WOODEN SUPPORT FOR BARREL TO DRAWING NO GCF 50 40332
Physical Verification needed
Description
WOODEN SUPPORT FOR BARREL TO DRAWING NO.GCF/50/40332
Specification
WOODEN SUPPORT FOR BARREL TO DRAWING NO.GCF/50/40332
Testing / Inspection Facility
90
48
Number
PALLET FOR SHELL LOADING TO DRAWING NO GCF 50 40226
Physical Verification needed
Description
PALLET FOR SHELL LOADING TO DRAWING NO.GCF/50/40226
Specification
PALLET FOR SHELL LOADING TO DRAWING NO.GCF/50/40226
Manufacturing Technology
As per tender document part L
Testing / Inspection Facility
As per tender document part L
90
36
Number
FLUID INDICATOR 1133972 5161642
Physical Verification needed
Description
FLUID INDICATOR 1133972/5161642
Specification
FLUID INDICATOR 1133972/5161642
Manufacturing Technology
As per tender document part L
Testing / Inspection Facility
As per tender document part L
90
36
Number
FLUID INDICATOR 1141826 4077480
Physical Verification needed
Description
FLUID INDICATOR 1141826/4077480
Specification
FLUID INDICATOR 1141826/4077480
Manufacturing Technology
As per tender document part L
Testing / Inspection Facility
As per tender document part L
90
36
Number
BUMPER TO PART NO 5179367
Physical Verification needed
Description
BUMPER TO PART NO.5179367
Specification
BUMPER TO PART NO.5179367
Manufacturing Technology
As per tender document part L
Testing / Inspection Facility
As per tender document part L
90
45
Number
LIST TO PART NO GCF 50 39243
Physical Verification needed
Description
LIST TO PART NO.GCF/50/39243.
Specification
LIST TO PART NO.GCF/50/39243.
Manufacturing Technology
As per tender document part L
Testing / Inspection Facility
As per tender document part L
90
52
Number
RUBBER BAND TO PART NO 6307134
Description
RUBBER BAND TO PART NO.6307134
Specification
RUBBER BAND TO PART NO.6307134
Manufacturing Technology
As per tender document part L
Testing / Inspection Facility
As per tender document part L
90
81
Number
RUBBER TILE TO PART NO 6324462
Physical Verification needed
Description
RUBBER TILE TO PART NO.6324462
Specification
RUBBER TILE TO PART NO.6324462
Manufacturing Technology
As per tender document part L
Testing / Inspection Facility
As per tender document part L
90
312
Number
RUBBER PROTECTOR TO PT NO 6358836
Physical Verification needed
Description
RUBBER PROTECTOR TO PT.NO.6358836
Specification
RUBBER PROTECTOR TO PT.NO.6358836
Manufacturing Technology
As per tender document part L
Testing / Inspection Facility
As per tender document part L
90
39
Number