Firm must be equipped with the all manufacturing /testing facilities, required functionally to develop the tendered items/ components/ Assys as per specification.
Drawing : Wire drawing machine of suitable size to draw electrode steel wire to final size of dia 1.2 mm
Heat Treatment : Continuous Annealing furnace for annealing of electrode wire. Furnace should have capacity of maintainng temp 700 dec C min.
Plating : Suitable Electroplating facility to continuously plate electrode wire 1.2 mm dia with Copper.
Coiling : Suitable coiling maching for making each spool of weight 15 Kgs.
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
MAGNESIUM ALLOY CASTING, CASTING DIMENSION: CYLINDRICAL SHAPE-DIA 120 MM (TOLERANCE +1MM) X 1 FT LENGTH OR ITS MULTIPLES TO SPECN. MAG 3, MG-AL 10 ZN MN TO BS:2970-1972 OR BS EN-1753, EN-MCMG AL 9 ZN/(A) (NUMBER EN-MC-21120)
Specification
MAGNESIUM ALLOY CASTING, CASTING DIMENSION: CYLINDRICAL SHAPE-DIA 120 MM (TOLERANCE +1MM) X 1 FT LENGTH OR ITS MULTIPLES TO SPECN. MAG 3, MG-AL 10 ZN MN TO BS:2970-1972 OR BS EN-1753, EN-MCMG AL 9 ZN/(A) (NUMBER EN-MC-21120)
TORCH CELL(DRY CELL) 1.5 VOLTS NO.950 MAKE:EVEREADY/NIPPO/NOVINO NOTE:- THE MANUFACTURING DATE SHOULD NOT BE MORE THAN 3 MONTHS AT THE TIME OF SUPPLY AND SUPPLY MUST BE IN STAGGERED WAY
Specification
TORCH CELL(DRY CELL) 1.5 VOLTS NO.950 MAKE:EVEREADY/NIPPO/NOVINO NOTE:- THE MANUFACTURING DATE SHOULD NOT BE MORE THAN 3 MONTHS AT THE TIME OF SUPPLY AND SUPPLY MUST BE IN STAGGERED WAY
CHARGING CABLE 12V DC CONSISTING OF WIRE 3.5 SQ.MM, 1 METER LENGTH(RED & BLACK),2 NOS.OF CROCODILE CLIPS (RED & BLACK INDICATION) & 12V DC JACK. (SAMPLE MUST BE APPROVED BEFORE BULK SUPPLY)
Specification
CHARGING CABLE 12V DC CONSISTING OF WIRE 3.5 SQ.MM, 1 METER LENGTH(RED & BLACK),2 NOS.OF CROCODILE CLIPS (RED & BLACK INDICATION) & 12V DC JACK. (SAMPLE MUST BE APPROVED BEFORE BULK SUPPLY)
RECHARGEABLE BATTERY, RCR123/RCR123A/16340, 3.7 VOLT CAPACITY 650 MAH MINIMUM. A SAMPLE OF RECHARGEABLE BATTERY MUST BE SUBMITTED AT THE TIME OF TENDER
Specification
RECHARGEABLE BATTERY, RCR123/RCR123A/16340, 3.7 VOLT CAPACITY 650 MAH MINIMUM. A SAMPLE OF RECHARGEABLE BATTERY MUST BE SUBMITTED AT THE TIME OF TENDER
PCB FOR PNV MONOCULAR(TWO STAGE REGULATED POWER SUPPLY WITH LOW BATTERY VOLTAGE INDICATION OUTPUT POINTS), DETAILS AS PER DRAWING NO.: MCT-3497 NOTE: SAMPLE MUST BE PROVIDED BEFORE BULK SUPPLY.
Specification
PCB FOR PNV MONOCULAR(TWO STAGE REGULATED POWER SUPPLY WITH LOW BATTERY VOLTAGE INDICATION OUTPUT POINTS), DETAILS AS PER DRAWING NO.: MCT-3497 NOTE: SAMPLE MUST BE PROVIDED BEFORE BULK SUPPLY.
ROTARY SWITCH,6 POSITIONS,2 POLE,30 DEGREE, 200MA,115V,56 SERIES, WITH SUITABLE KNOB FOR ROTATING THE SHAFT. (LOCKING ARRANGEMENT FOR RESTRICTING THE POSITIONS OF THE SWITCH IS ALSO TO BE SUPPLIED ALONG WITH). SEALED TYPE (SHOULD WITHSTAND WATER PRESSURE OF 15PSI MINIMUM (103KPA) WITHOUT LEAKAGE.
Specification
ROTARY SWITCH,6 POSITIONS,2 POLE,30 DEGREE, 200MA,115V,56 SERIES, WITH SUITABLE KNOB FOR ROTATING THE SHAFT. (LOCKING ARRANGEMENT FOR RESTRICTING THE POSITIONS OF THE SWITCH IS ALSO TO BE SUPPLIED ALONG WITH). SEALED TYPE (SHOULD WITHSTAND WATER PRESSURE OF 15PSI MINIMUM (103KPA) WITHOUT LEAKAGE.
LED RED COLOUR WITH ADAPTER,DIA.3 MM X LENGTH 4.5 MM,INTENSITY MATCHED STANDARD DIFFUSED,IR.MAX-30 MA,IR.TYPICAL-10 MA, VR.MAX-5V,PD.MAX-120 MW,VIEWING ANGLE- 55 DEGREE,OPERATING TEMP-55 TO 100 DEG.C NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY. MM
Specification
LED RED COLOUR WITH ADAPTER,DIA.3 MM X LENGTH 4.5 MM,INTENSITY MATCHED STANDARD DIFFUSED,IR.MAX-30 MA,IR.TYPICAL-10 MA, VR.MAX-5V,PD.MAX-120 MW,VIEWING ANGLE- 55 DEGREE,OPERATING TEMP-55 TO 100 DEG.C NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY. MM
INFRARED LENS ASSEMBLY,FOCAL LENGTH GREATER THAN OR EQUAL TO 50 MM,F LESS THAN OR EQUAL TO 1.25,COMPATIBLE WITH 12 MICRON PITCH DETECTOR,MANUAL FOCUS,WEIGHT LESS THAN OR EQUALTO 380 GMS,TRANSMISSION GREATER THAN OR EQUAL TO 80%,HFOV GREATER THAN OR EQUAL TO 6 DEGREE,DETECTION:700M OF SINGLE HUMAN WALKING,RECOGNITION:500M OF SINGLE HUMAN STANDING, OPERAT TEMP:-20 TO +50 DEG.C,STORAGE TEMP:-20 TO +70 DEG.C,
Specification
INFRARED LENS ASSEMBLY,FOCAL LENGTH GREATER THAN OR EQUAL TO 50 MM,F LESS THAN OR EQUAL TO 1.25,COMPATIBLE WITH 12 MICRON PITCH DETECTOR,MANUAL FOCUS,WEIGHT LESS THAN OR EQUALTO 380 GMS,TRANSMISSION GREATER THAN OR EQUAL TO 80%,HFOV GREATER THAN OR EQUAL TO 6 DEGREE,DETECTION:700M OF SINGLE HUMAN WALKING,RECOGNITION:500M OF SINGLE HUMAN STANDING, OPERAT TEMP:-20 TO +50 DEG.C,STORAGE TEMP:-20 TO +70 DEG.C,
DC ADOPTER FOR BATTERY CHARGER 18650:- DC CONVERTER WITH INPUT CONNECTOR-CROCODILE CLIPS FOR DIRECT ATTACHMENT TO BATTERY,INPUT VOLTAGE-12-36 VOLT DC,INPUT WIRE LENGTH-1 METER, OUTPUT CONNECTOR- MICRO USB, OUTPUT ELECTRICAL SPECS-5 VOLT DC 1 AMPERE, OUTPUT WIRE LENGTH-1 METER,PROTECTIONS-APPROPRIATE OVER CURRENT AND OVER VOLTAGE PROTECTIONS BUILT IN
Specification
DC ADOPTER FOR BATTERY CHARGER 18650:- DC CONVERTER WITH INPUT CONNECTOR-CROCODILE CLIPS FOR DIRECT ATTACHMENT TO BATTERY,INPUT VOLTAGE-12-36 VOLT DC,INPUT WIRE LENGTH-1 METER, OUTPUT CONNECTOR- MICRO USB, OUTPUT ELECTRICAL SPECS-5 VOLT DC 1 AMPERE, OUTPUT WIRE LENGTH-1 METER,PROTECTIONS-APPROPRIATE OVER CURRENT AND OVER VOLTAGE PROTECTIONS BUILT IN
OPTICAL GLASS DBC-610573 IN CYLINDRICAL SHAPE DIA=45MM +1MM-0.5MM, BLANK
THICKNESS=14MM +0.5MM-0MM,
IS:1400-1960, STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO
THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10NM/CM
Specification
OPTICAL GLASS DBC-610573 IN CYLINDRICAL SHAPE DIA=45MM +1MM-0.5MM, BLANK
THICKNESS=14MM +0.5MM-0MM,
IS:1400-1960, STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO
THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10NM/CM
LITHIUM-ION RECHARGEABLE BATTERY 18650, 3.70 V, 12.6WH, 3400MAH,(BATTERY MUST GIVE A BACK-UP OF 06 HOURS WITH UNCOOLED THERMAL IMAGERS), TENDER SAMPLE MUST BE SUBMITTED AT THE TIME OF TENDER.
Specification
LITHIUM-ION RECHARGEABLE BATTERY 18650, 3.70 V, 12.6WH, 3400MAH,(BATTERY MUST GIVE A BACK-UP OF 06 HOURS WITH UNCOOLED THERMAL IMAGERS), TENDER SAMPLE MUST BE SUBMITTED AT THE TIME OF TENDER.
OPTICAL GLASS BAK4-569561, IN CYLINDRICAL SHAPE DIA=28MM +1MM-0.5MM, BLANK THICKNESS=7MM +0.5MM-0MM, IS:1400-1960,STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
Specification
OPTICAL GLASS BAK4-569561, IN CYLINDRICAL SHAPE DIA=28MM +1MM-0.5MM, BLANK THICKNESS=7MM +0.5MM-0MM, IS:1400-1960,STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
Cloth Drill Cotton Disruptive Pattern 142cm Minimum Width to be used in Smoke Denison
Specification:- PROV/S/4112/TC-11/2009-05. As per schedule no. CIT&C/PMS/36(d). As per CQA(T&C)Kanpur QAI No. CQA(T&C)/QAI/99 TC-11
Specification
Cloth Drill Cotton Disruptive Pattern 142cm Minimum Width to be used in Smoke Denison
Specification:- PROV/S/4112/TC-11/2009-05. As per schedule no. CIT&C/PMS/36(d). As per CQA(T&C)Kanpur QAI No. CQA(T&C)/QAI/99 TC-11
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing/specification.
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing/specification.
Manufacturing Facilities Involved
• CNC /Conventional machining or Metal Forming –Press Work.
• Blanking/laser Cut if Metal Forming –Press Work.
In case the tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining Facility is mandatory.
Inspection Facilities Involved
• Standard Measuring Instruments & Gauges
• Material Testing Facility with NABL Accreditation
Tenderer shall satisfy / declare the required inspection facilities are available either in-house or outsourced.
100% Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm (min.)
Specn:- Appendix "A" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
Specification
100% Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm (min.)
Specn:- Appendix "A" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
CLOTH CEE HEAVY 72 CM (C.N.H2/8305)
CLOTH CEE HEAVY 72 CM (CAT PART NO. H2/8305-000142)
SPECIFICATION: IS:3751-1993 (FIRST REVISION) REAFFIRMED 2010 AMD. NO. 1
Specification
CLOTH CEE HEAVY 72 CM (C.N.H2/8305)
CLOTH CEE HEAVY 72 CM (CAT PART NO. H2/8305-000142)
SPECIFICATION: IS:3751-1993 (FIRST REVISION) REAFFIRMED 2010 AMD. NO. 1
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
