TAPE POLYESTER KHAKI (FOR NET MOSQUITO ROUND MESH POLYESTER KHAKI WITH CALICO BORDER) ONE SET CONSISTING OF 1) TAPE POLYESTER KHAKI 13MM=4.30 MTR 2) TAPE NEWAR POLYESTER KHAKI 25MM=9.50MTR
AS PER ANNEXURE 'A' ATTACHED TO JSS 7210-29:2016(REV NO 1) NOTE: MATERIAL SHOULD BE SUPPLIED IN SET IN ONE COLOUR.
Specification
TAPE POLYESTER KHAKI (FOR NET MOSQUITO ROUND MESH POLYESTER KHAKI WITH CALICO BORDER) ONE SET CONSISTING OF 1) TAPE POLYESTER KHAKI 13MM=4.30 MTR 2) TAPE NEWAR POLYESTER KHAKI 25MM=9.50MTR
AS PER ANNEXURE 'A' ATTACHED TO JSS 7210-29:2016(REV NO 1) NOTE: MATERIAL SHOULD BE SUPPLIED IN SET IN ONE COLOUR.
Drawing no.
Manufacturing Technology
AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES
Testing / Inspection Facility
AS PER ATTACHED TESTING / INSPECTION FACILITY FILES
Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through Strapping Device. Specification No. JSS:8135-10:2004. as per relevant clause of specification.
Specification
Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through Strapping Device. Specification No. JSS:8135-10:2004. as per relevant clause of specification.
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
STEEL ALLOY BAR SAE 4130 PER SAE-AMS-S-6758 OR SAE 4340 PER SAE-AMS-S-5000. ROD DIA 90X154L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED. for SRCG
Specification
STEEL ALLOY BAR SAE 4130 PER SAE-AMS-S-6758 OR SAE 4340 PER SAE-AMS-S-5000. ROD DIA 90X154L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED. for SRCG
Copper Alloy Bar C90700 (Tin branze alloy) per SAE 65 or ASTM B505 size dia 28 mm. All relevant chemical and mechanical test certificate from NABL accredited LAB to be submitted.
Specification
Copper Alloy Bar C90700 (Tin branze alloy) per SAE 65 or ASTM B505 size dia 28 mm. All relevant chemical and mechanical test certificate from NABL accredited LAB to be submitted.
ALLOY STEEL PLATE THICK 12MM SAE 4130 PER SAE-AMS-6345. PLATE SIZE: 12T X 90L X 80W (IN MM). ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED.FOR SRCG.
Specification
ALLOY STEEL PLATE THICK 12MM SAE 4130 PER SAE-AMS-6345. PLATE SIZE: 12T X 90L X 80W (IN MM). ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED.FOR SRCG.
ALUMINIUM ALLOY BAR TYPE 6061-T6 PER QQ-A-225/8 OR T651 SIZE: DIA100 X 144L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED
Specification
ALUMINIUM ALLOY BAR TYPE 6061-T6 PER QQ-A-225/8 OR T651 SIZE: DIA100 X 144L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED
ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH. IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION. For CRADLE MOBILE AND CRADLE BASE OF SRCG. ALL RELEVANT TEST CERTIFICATES FROM NABL LAB TO BE SUBMITTED.
Specification
ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH. IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION. For CRADLE MOBILE AND CRADLE BASE OF SRCG. ALL RELEVANT TEST CERTIFICATES FROM NABL LAB TO BE SUBMITTED.
ALUMINIUM ALLOY PLATE 6061- T6 OR T651 PER QQ-A-250/11 size: 60T X 100W X 410L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED.
Specification
ALUMINIUM ALLOY PLATE 6061- T6 OR T651 PER QQ-A-250/11 size: 60T X 100W X 410L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED.
ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 size: 32T X 406W X 406L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED
Specification
ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 size: 32T X 406W X 406L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED
LF 7441121739, VIDEO CABLE ASSY-3 (FISCHER)
FISCHER CABLES MAKE CA S 103 A
015-700 + TERMINATION 1
OTHER END S103 A015-700+TRIAX
CABLE LENGTH 1.5 MTR COLOUR
BLACK / VIDEO CABLE ASSY-3 AS
PER DRG. NO. ODC-OLF/CTI-T-90
/049
Specification
LF 7441121739, VIDEO CABLE ASSY-3 (FISCHER)
FISCHER CABLES MAKE CA S 103 A
015-700 + TERMINATION 1
OTHER END S103 A015-700+TRIAX
CABLE LENGTH 1.5 MTR COLOUR
BLACK / VIDEO CABLE ASSY-3 AS
PER DRG. NO. ODC-OLF/CTI-T-90
/049
Drawing no.
LF 7441121739, VIDEO CABLE ASSY-3 (FISCHER) FISCHER CABLES MAKE CA S 103 A 015-700 + TERMINATION 1 OTHER END S103 A015-700+TRIAX CABLE LENGTH
SNAP FASTENER (FOUR PIECES) SPRING TYPE 7/7 WITH PLASTIC WASHER
IS:4741-1968 (AMDT. 1, REAFFIRMED 2003) EXCEPT FOR PULL STRENGTH WHICH SHOULD BE 4 KGF (MIN.), FOR PLASTIC WASHER - THICKNESS (UNDER PRESSURE 200 G/CM SQ.) 1.14 MM & DIA 12.52 MM OF BEST TRADE QUALITY
Specification
SNAP FASTENER (FOUR PIECES) SPRING TYPE 7/7 WITH PLASTIC WASHER
IS:4741-1968 (AMDT. 1, REAFFIRMED 2003) EXCEPT FOR PULL STRENGTH WHICH SHOULD BE 4 KGF (MIN.), FOR PLASTIC WASHER - THICKNESS (UNDER PRESSURE 200 G/CM SQ.) 1.14 MM & DIA 12.52 MM OF BEST TRADE QUALITY
NO.-T.S/002/BAG KIT UNIVERSAL DT. 19.12.2016 RUBBER STUD ROUND BLACK SPEC-AS PER ANNEXURE 'C' & DRAWING" OF RELEVANT SPECIFICATION OF BAG KIT UNIVERSAL MARK-II AS PER SPECIFICATION. AS PER SPECIFICATION.
Specification
NO.-T.S/002/BAG KIT UNIVERSAL DT. 19.12.2016 RUBBER STUD ROUND BLACK SPEC-AS PER ANNEXURE 'C' & DRAWING" OF RELEVANT SPECIFICATION OF BAG KIT UNIVERSAL MARK-II AS PER SPECIFICATION. AS PER SPECIFICATION
NETTING MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI ONE SET COSISTING OF :- (I) NETTING MOSQUITO R/M F/R KHAKI 124cm=6.12Mtr., (II) NETTING MOSQUITO R/M F/R KHAKI 109cm=2.02Mtr., SPECN. No. D/4211/99/TC-11(c) AND Annxure-"A" ,WIDTH OF THE MATRL.- (I) & (II) WILL BE 124cm & 109cm RESPECTIVELY HAVING BUILT IN SELVEDGE OF 20mm (min) ON BOTH SIDES . BOLT LENGTH FOR MTRL.-(I) WILL BE 24.50 Mtr. AND ABOVE IN MULTIPLE OF 6.12 Mtr. , BOLT LENGTH OF MTRL.-(II) WILL BE 24 Mtr. AND ABOVE IN MULTIPLE OF 2Mtr.
SPECN.:- D/4211/99/TC-11(C) AND ANNEXURE 'A'
Specification
NETTING MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI ONE SET COSISTING OF :- (I) NETTING MOSQUITO R/M F/R KHAKI 124cm=6.12Mtr., (II) NETTING MOSQUITO R/M F/R KHAKI 109cm=2.02Mtr., SPECN. No. D/4211/99/TC-11(c) AND Annxure-"A" ,WIDTH OF THE MATRL.- (I) & (II) WILL BE 124cm & 109cm RESPECTIVELY HAVING BUILT IN SELVEDGE OF 20mm (min) ON BOTH SIDES . BOLT LENGTH FOR MTRL.-(I) WILL BE 24.50 Mtr. AND ABOVE IN MULTIPLE OF 6.12 Mtr. , BOLT LENGTH OF MTRL.-(II) WILL BE 24 Mtr. AND ABOVE IN MULTIPLE OF 2Mtr.
SPECN.:- D/4211/99/TC-11(C) AND ANNEXURE 'A'
Frame side tray feed to DSCAT NO 1005 007400 A5107 DC NO 26983 SA for DC latest issued to be followed with firms material required for 12.7mm AD Gun LF No 7013998057
Specification
Frame side tray feed to DSCAT NO 1005 007400 A5107 DC NO 26983 SA for DC latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998057
Arm rocking bar to DSCAT NO 1005 007323 A2524 DC NO.27086 SA for DC Latest to be followed with firms material required for 12.7mm AD Gun LF No. 7013998061
Specification
Arm rocking bar to DSCAT NO 1005 007323 A2524 DC NO.27086 SA for DC Latest to be followed with firms material required for 12.7mm AD Gun LF No. 7013998061
Base right cylinder gas to DSCAT NO 1005 007314 A2627 DC NO 26990 SA for DC Latest issued to be followed with firm's material required for 12.7mm AD Gun LF NO 7013998056
Specification
Base right cylinder gas to DSCAT NO 1005 007314 A2627 DC NO 26990 SA for DC Latest issued to be followed with firm's material required for 12.7mm AD Gun LF NO 7013998056
Base left cylinder gas to DSCAT NO 1005 007317 A2628 DC NO 27095 SA for DC Latest to be followed with firm's material required for 12.7mm AD Gun LF NO 7013998062
Specification
Base left cylinder gas to DSCAT NO 1005 007317 A2628 DC NO 27095 SA for DC Latest to be followed with firm's material required for 12.7mm AD Gun LF NO 7013998062
Pawl feed belt to DSCAT NO 3040 003453 A6026 DC NO 26991 SA for DC Latest to be followed Component to be manufactured through forging route required for 12.7mm AD Gun LF NO7013998055
Specification
Pawl feed belt to DSCAT NO 3040 003453 A6026 DC NO 26991 SA for DC Latest to be followed Component to be manufactured through forging route required for 12.7mm AD Gun LF NO7013998055
Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA for DC Latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998063
Specification
Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA for DC Latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998063
Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA for DC Latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998063
Specification
Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA for DC Latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998063
LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS
Specification
LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS