Machining of 13mm Dia Rod Grade 080M36 OR 080M40 in Nor H condition to BS:970 PT-1-1983 FOR CONVERSION IN CONTACT TO DRG. 4-025998 059 (TO SKETCH NO. OTF/S/011) BEFORE TIN PLATING OPERATION (INPUT MATERIAL I/C:0142007013) (IC:9140070998)
Specification
Machining of 13mm Dia Rod Grade 080M36 OR 080M40 in Nor H condition to BS:970 PT-1-1983 FOR CONVERSION IN CONTACT TO DRG. 4-025998 059 (TO SKETCH NO. OTF/S/011) BEFORE TIN PLATING OPERATION (INPUT MATERIAL I/C:0142007013) (IC:9140070998)
ST.ROD 42MM DIA TO SPECIFICATION IS-4432-1988 GD-13NI 13 CR3 WITH RESTRICTIONS S%=0.010MAX.,P%=0.015MAX.&(S+P)%=0.022MAX. GROUND & POLISHED BEFORE ROLLING.NORMALISED & PICKLED.RING GRIND TESTED TO ENSURE FORGING QUALITY.04-06METERS LONG.OTHER PARAMETERS AS PER QAI NO.QA-1/QAI/15 (FOR PISTON EXTENSION)
Specification
ST.ROD 42MM DIA TO SPECIFICATION IS-4432-1988 GD-13NI 13 CR3 WITH RESTRICTIONS S%=0.010MAX.,P%=0.015MAX.&(S+P)%=0.022MAX. GROUND & POLISHED BEFORE ROLLING.NORMALISED & PICKLED.RING GRIND TESTED TO ENSURE FORGING QUALITY.04-06METERS LONG.OTHER PARAMETERS AS PER QAI NO.QA-1/QAI/15 (FOR PISTON EXTENSION)
1) Chemical & Mechanical properties as per std. given in Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
SHAFT FOOT BALL DRIVE D12x4 AS PER DRG NUMBER 074260A AND NUT BALL FOOT BALL SCREW DIA 12xPITCH 4MM AS PER SPECIFICATION KGT 12x4FGRRH1SAG MAKE EICHENBERGER OR EQUIVALENT
Specification
SHAFT FOOT BALL DRIVE D12x4 AS PER DRG NUMBER 074260A AND NUT BALL FOOT BALL SCREW DIA 12xPITCH 4MM AS PER SPECIFICATION KGT 12x4FGRRH1SAG MAKE EICHENBERGER OR EQUIVALENT
STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*2 & SKM-884/1*3 ENCL.(MAT.SUPPLIED BY SAF AGAINST BANK GUARANTEE
Specification
STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*2 & SKM-884/1*3 ENCL.(MAT.SUPPLIED BY SAF AGAINST BANK GUARANTEE
IS: 4227-1998 Variety No. 1 Except that:-
Nominal Linear Denstiy Core --
of Yarn (dtex), a Sheath 235x1 to 235x2 dtex
tolrence of (-) 5%
and (+) 10%
Breaking load on 15 cm 226 N,min
Test Length, N
TPM (final) 100, min.