Name
Code
Quantity
Approx Value
Select
Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm
Description
Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm
Specification
Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm
Manufacturing Technology
Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm
Testing / Inspection Facility
Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm
70
1288
Number
GEAR CROWN 3RD PLANETARY GEAR SET 247
Physical Verification needed
Description
GEAR CROWN 3RD PLANETARY GEAR SET 172.40.247
Specification
GEAR CROWN 3RD PLANETARY GEAR SET 172.40.247
Testing / Inspection Facility
62
300
Number
CROWN GEAR OF 3RD PLANETARY GEAR SET 310
Physical Verification needed
Description
CROWN GEAR OF 3RD PLANETARY GEAR SET 172.40.310
Specification
CROWN GEAR OF 3RD PLANETARY GEAR SET 172.40.310
Testing / Inspection Facility
62
100
Number
BOOSTER 324
Physical Verification needed
Description
BOOSTER 172.40.324
Specification
BOOSTER 172.40.324
Testing / Inspection Facility
62
100
Number
INNER BOOSTER 323
Physical Verification needed
Description
INNER BOOSTER 172.40.323
Specification
INNER BOOSTER 172.40.323
Testing / Inspection Facility
62
100
Number
BOOSTER 322
Physical Verification needed
Description
BOOSTER 172.40.322
Specification
BOOSTER 172.40.322
Testing / Inspection Facility
62
100
Number
BOOSTER 270
Physical Verification needed
Description
BOOSTER 172.40.270-1
Specification
BOOSTER 172.40.270-1
Testing / Inspection Facility
62
100
Number
CROWN 320
Physical Verification needed
Description
CROWN 172.40.320
Specification
CROWN 172.40.320
Testing / Inspection Facility
62
100
Number
FAN HUB 050
Physical Verification needed
Description
FAN HUB 175.41.050
Specification
FAN HUB 175.41.050
Testing / Inspection Facility
62
150
Number
FAN HUB 006
Physical Verification needed
Testing / Inspection Facility
62
150
Number
TRIGGER MECHANISM ASSEMBLY REQUIRED FOR LMG BELT FED
Physical Verification needed
Description
TRIGGER MECHANISM ASSEMBLY AS PER DRG.NO. 1804 01 01 02 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Specification
TRIGGER MECHANISM ASSEMBLY AS PER DRG.NO. 1804 01 01 02 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Drawing no.
1804 01 01 02 00 000 00DA
Manufacturing Technology
Machining, Spring, Coiling machine and assy.
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
70
25
Number
RECEIVER FOR LMG BELT FED
Physical Verification needed
Description
RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED
Specification
RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED
Drawing no.
1804 01 01 01 01 000 00DA
Manufacturing Technology
Machining & Tig Laser welding
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
70
25
Number
GAS BLOCK and FORE SIGHT ASSEMBLY FOR LMG BELT FED
Physical Verification needed
Description
GAS BLOCK & FORE SIGHT ASSEMBLY AS PER DRG.NO.1804 01 01 04 16 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Specification
GAS BLOCK & FORE SIGHT ASSEMBLY AS PER DRG.NO.1804 01 01 04 16 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Drawing no.
1804 01 01 04 16 000 00DA
Manufacturing Technology
Machining, Spring, Coiling machine and assy.
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
70
50
Number
Cocking Handle Assembly for 9X19 mm Machine Pistol
Physical Verification needed
Description
Cocking Handle Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 05 12 000 00DB
Specification
Cocking Handle Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 05 12 000 00DB
Drawing no.
2101 01 02 05 12 000 00DB
Testing / Inspection Facility
70
7
Number
Bolt Assembly for 9X19 mm Machine Pistol
Physical Verification needed
Description
Bolt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 06 000 00DA
Specification
Bolt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 06 000 00DA
Drawing no.
2101 01 02 01 06 000 00DA
Manufacturing Technology
As per drawing As per drawing
Testing / Inspection Facility
70
7
Number
Locking Rear Block for 9X19 mm Machine Pistol
Physical Verification needed
Description
Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA
Specification
Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA
Drawing no.
2101 01 02 00 00 002 00DA
Testing / Inspection Facility
70
7
Number
FLANGE TO LF 3806211059
Physical Verification needed
Description
FLANGE TO DRG NO: 172.28.004-1/C
Specification
GOST 977 - 88
Drawing no.
172.28.004-1/C
Testing / Inspection Facility
38
250
Number
7015010022 SCREW BM10 6GX22 46 016 GOST 17475 80
Physical Verification needed
Description
7015010022 SCREW BM10 6GX22 46 016 GOST 17475 80
Specification
SCREW BM10 6GX22 46 016 GOST 17475 80
Testing / Inspection Facility
70
488270
Number
Wheel Rear Sight for 9X19 mm Machine Pistol
Physical Verification needed
Description
Wheel Rear Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 016 00DA
Specification
Wheel Rear Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 016 00DA
Drawing no.
2101 01 02 01 05 016 00DA
Testing / Inspection Facility
70
7
Number
7008216030 BOLT M16 6GX30 88 38XC 01 GOST 7808 70
Physical Verification needed
Description
7008216030 BOLT M16 6GX30 88 38XC 01 GOST 7808 70
Specification
BOLT M16 6GX30 88 38XC 01 GOST 7808 70
Testing / Inspection Facility
70
11430
Number
SEMI MACHINED BLANKS FOR ILLUMINATING TIME FUZE BODY TO OFAJ DRG NO CG 27 H AND PERIPHERAL GRAIN GROWTH 1MM MAX ON RADIUS
Physical Verification needed
Description
SEMI-MACHINED "BLANKS FOR ILLUMINATING TIME FUZE BODY TO OFAJ DRG NO CG 27 H & PERIPHERAL GRAIN GROWTH 1MM (MAX) ON RADIUS"
Specification
SEMI-MACHINED "BLANKS FOR ILLUMINATING TIME FUZE BODY TO OFAJ DRG NO CG 27 H & PERIPHERAL GRAIN GROWTH 1MM (MAX) ON RADIUS"
Testing / Inspection Facility
63
6514
Number
FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO DC 154 D PGG
Description
FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO. DC-154 D PGG 1.8MM (MAX) ON RADIUS
Specification
FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO. DC-154 D PGG 1.8MM (MAX) ON RADIUS
Testing / Inspection Facility
63
3815
Number
Bolt Assembly for 9X19 mm Machine Pistol
Physical Verification needed
Description
Bolt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 06 000 00DA
Specification
Bolt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 06 000 00DA
Drawing no.
2101 01 02 01 06 000 00DA
Manufacturing Technology
As per drawing As per drawing
Testing / Inspection Facility
70
7
Number
Plate Rear and Butt Assembly for 9X19 mm Machine Pistol
Physical Verification needed
Description
Plate Rear & Butt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 02 000 00DA
Specification
Plate Rear & Butt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 02 000 00DA
Drawing no.
2101 01 02 00 02 000 00DA
Manufacturing Technology
As per drawing As per drawing
Testing / Inspection Facility
As per drawing As per drawing
70
7
Number
WINCH 500KG TO 6206605092
Physical Verification needed
Description
WINCH 500KG TO DRG NO. 527.08.70.0613
Specification
WINCH 500KG TO DRG NO. 527.08.70.0613
Drawing no.
527.08.70.0613
Testing / Inspection Facility
62
49
Number
PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
Description
PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
Specification
PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
Drawing no.
TEND 2611 STAR 4
Manufacturing Technology
MACHINED COMPONENT TO BLANKSTAGE
Testing / Inspection Facility
70
3433
Number
SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724
Physical Verification needed
Description
SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724
Specification
AS PER OFT REQUIREMENTS
Testing / Inspection Facility
70
1683
Ample
CORDAGE BRAIDED NYLON 23 KG UD
Description
CORDAGE BRAIDED NYLON 23 KG UD
Specification
Cordage Braided Nylon 23 Kg Undyed
CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE
SPCN. No. IS :4227-1998 VARIETY NO. 1 EXCEPT THAT:-
NOMINAL LINEAR DENSITY CORE –-
OF YARN (DTEX), SHEATH Alternate ends of 235X1
a tolerance of and 235x2 dtex
(-)5% and (+) 10%
BREAKING LOAD ON 15CM 226 N, MIN
TEST LENGTH, N
TPM (final) 100, min
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101119839
10967
Metre
RIBBON NYLON 50 MM UNDYED for BP JAGUAR
Description
RIBBON NYLON 50 MM UNDYED
Specification
ADRDE/SPECN/1983/12(b)
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101682251
234242
Metre
RIBBON NYLON 16 MM UNDYED for BP JAGUAR
Description
RIBBON NYLON 16 MM UNDYED
Specification
ADRDE/SPECN/1983/12(b)
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101682216
413623
Metre
Lower Hand Guard Assembly for CQB 5 56x45 MM
Physical Verification needed
Description
LOWER HAND GUARD ASSY. FOR CQB 5.56X45MM DRG. NO. 1901 01 07 00 00 000 00DD
Specification
LOWER HAND GUARD ASSY. FOR CQB 5.56X45MM DRG. NO. 1901 01 07 00 00 000 00DD
Drawing no.
DRG No 1901 01 07 00 00 000 00DD
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
7012670011
20
Number
OLED DISPLAY MODEL EMA 100311 01 SVGA REV 3 MONOCHROME GREEN OLED XL MICRO DISPLAY WITH 0point5 MM GLASS COVER 7441121483
Physical Verification needed
Description
OLED DISPLAY MODEL-EMA 100311-01 SVGA + REV 3 MONOCHROME GREEN OLED-XL MICRO DISPLAY WITH 0.5 MM GLASS COVER (LF-7441121483)
Specification
OLED DISPLAY MODEL-EMA 100311-01 SVGA + REV 3 MONOCHROME GREEN OLED-XL MICRO DISPLAY WITH 0.5 MM GLASS COVER (LF-7441121483)
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
Poly Plastic Tape White 12 mm
Description
Poly Plastic Tape White 12 mm
Specification
Poly Plastic Tape White 12 mm printed with OPF Kanpur in green- colour for semi automatic – strapping device is as per Specification –
1- Colour of tape - White
2- Colour of letter – Green
3- Breaking strength – 70 to 85 kgs.
4- Sealing Temperature – 165 degree centigrade
5- Size 12 mm width X 0.50 mm thick approx.
6-Sporn (paper cone) size O/D 227 MM X I/D 203 MM
7- Length of roll (standard) 1800 mtrs
8- Printing of word OPF KANPUR on the tape white at a gap of 6” word size 8 mm.
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per Specification/drawing
9911036716
63023
Metre
BIPOD ASSEMBLY REQUIRED FOR LMG BELT FED
Physical Verification needed
Description
BIPOD ASSEMBLY AS PER DRG.NO. 1804 01 08 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Specification
BIPOD ASSEMBLY AS PER DRG.NO. 1804 01 08 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Drawing no.
1804 01 08 00 00 000 00DA
Manufacturing Technology
Machining, Spring Coiling Machine, Welding and Assy.
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
70
25
Number
FEED MECHANISM and COVER ASSEMBLY REQUIRED FOR LMG BELT FED
Physical Verification needed
Description
FEED MECHANISM & COVER ASSEMBLY AS PER DRG.NO.1804 01 04 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Specification
FEED MECHANISM & COVER ASSEMBLY AS PER DRG.NO.1804 01 04 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Drawing no.
1804 01 04 00 00 000 00DA
Manufacturing Technology
Machining, Spring Coiling Machine and riveting
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
70
25
Number
BUTT ASSEMBLY REQUIRED FOR LMG BELT FED
Physical Verification needed
Description
BUTT ASSEMBLY AS PER DRG. NO. 1804 01 07 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Specification
BUTT ASSEMBLY AS PER DRG. NO. 1804 01 07 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Manufacturing Technology
Moulding, Forging, Machining, Spring Coiling machine & assy.
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
70
25
Number
RING TO DRG NO 172 40 146 F TO LF 3906401050
Physical Verification needed
Description
RING TO DRG NO 172 40 146 F
Specification
GOST 4543 71
Testing / Inspection Facility
39
200
Number
UNIFIED PRESSURE WARNING DEVICE TO 6206306281
Physical Verification needed
Description
UNIFIED PRESSURE WARNING DEVICE TO DRG NO.CDY1A-012CB
Specification
UNIFIED PRESSURE WARNING DEVICE TO DRG NO.CDY1A-012CB
Testing / Inspection Facility
62
39
Number