Name
Code
Quantity
Approx Value
Select
Steel Blank of Cylinder Gas
Physical Verification needed
Description
Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
Specification
Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
01
323
Number
HOUSING ASSY FOR LMG
Physical Verification needed
Description
HOUSING ASSY, DS CAT NO-1005-008001 (SAPRE ISSUE) FOR MONOPOD ASSY LMG 5.56MM
Specification
HOUSING ASSY, DS CAT NO-1005-008001 (SAPRE ISSUE) FOR MONOPOD ASSY LMG 5.56MM
Testing / Inspection Facility
70
988
Number
9070056934 ROD PISTON RECOIL MECHANISM IFL 8610
Physical Verification needed
Description
9070056934 ROD PISTON RECOIL MECHANISM (IFL-8610)
Specification
9070056934 ROD PISTON RECOIL MECHANISM (IFL-8610)
Testing / Inspection Facility
90
101
Number
9910448016 LEVER CONTROL HAND 2530 017684 ILG 1917 2530 017684
Physical Verification needed
Description
9910448016 LEVER CONTROL HAND (2530-017684), ILG-1917/2530-017684
Specification
9910448016 LEVER CONTROL HAND (2530-017684), ILG-1917/2530-017684
Testing / Inspection Facility
90
220
Number
9070056937 BODY ASSY FOR SHOCK ABSORBER ASSY AMG6893 1015 001762
Physical Verification needed
Description
9070056937 BODY ASSY(FOR SHOCK ABSORBER ASSY) AMG6893/1015-001762
Specification
9070056937 BODY ASSY(FOR SHOCK ABSORBER ASSY) AMG6893/1015-001762
Testing / Inspection Facility
90
23
Number
Body Finished Through IC Machining route for Revolver Side Swing
Description
Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
Specification
Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
Drawing no.
Drg. No. RV-03/1 SW.
Testing / Inspection Facility
All component's passed report provided by firm, as Dimensional reports & Chemical composition report by NABL certified Lab. (Except this load test report also to be passed in case of springs) and Components also to be checked (Dimentional, Chemical, load reports) in Factory on sample basic, clerance should be given after passing of components.
70
250
Number
MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
Physical Verification needed
Description
MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
Specification
MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
Drawing no.
NO. SK-6520/TE
Manufacturing Technology
PRESSURE SHAPING TECHNOLOGY i.e. COLD DIE etc.
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
SPRING AS PER DRAWING NO SK 6517 TE
Physical Verification needed
Description
SPRING AS PER DRAWING NO SK 6517 TE
Specification
SPRING AS PER DRAWING NO SK 6517 TE
Manufacturing Technology
PRESSURE SHAPING TECHNOLOGY i.e. COLD DIE etc.
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
MAIN SPRING AS PER DRAWING NO SK 6522 TE
Physical Verification needed
Description
MAIN SPRING AS PER DRAWING NO SK 6522 TE
Specification
MAIN SPRING AS PER DRAWING NO SK 6522 TE
Manufacturing Technology
SPRING MANUFACTURING TECHNOLOGY (COILING)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
AUTO SAFETY SPRING AS PER DRAWING NO SK 6518 TE
Physical Verification needed
Description
AUTO SAFETY SPRING AS PER DRAWING NO SK 6518 TE
Specification
AUTO SAFETY SPRING AS PER DRAWING NO SK 6518 TE
Drawing no.
NO SK- 6518 /TE
Manufacturing Technology
SPRING MANUFACTURING TECHNOLOGY (COILING)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
SPRING AS PER DRAWING NO SK 6516 TE
Physical Verification needed
Description
SPRING AS PER DRAWING NO SK 6516 TE
Specification
SPRING AS PER DRAWING NO SK 6516 TE
Manufacturing Technology
SPRING MANUFACTURING TECHNOLOGY (COILING)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
SPRING AS PER DRAWING NO SK 6515 TE
Physical Verification needed
Description
SPRING AS PER DRAWING NO SK 6515 TE
Specification
SPRING AS PER DRAWING NO SK 6515 TE
Manufacturing Technology
SPRING MANUFACTURING TECHNOLOGY (COILING)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
SPRING AS PER DRAWING NOS SK 6514 TE
Physical Verification needed
Description
SPRING AS PER DRAWING NOS SK 6514 TE
Specification
SPRING AS PER DRAWING NOS SK 6514 TE
Manufacturing Technology
SPRING MANUFACTURING TECHNOLOGY (COILING)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
RETAINER AS PER DRAWING NO SK 6521 TE
Physical Verification needed
Description
RETAINER AS PER DRAWING NO SK 6521 TE
Specification
RETAINER AS PER DRAWING NO SK 6521 TE
Drawing no.
NO. SK-6521/TE
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
LATCH AS PER DRAWING NO SK 6519 TE
Physical Verification needed
Description
LATCH AS PER DRAWING NO SK 6519 TE
Specification
LATCH AS PER DRAWING NO SK 6519 TE
Drawing no.
NO. SK-6519/TE
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
NUT AS PER DRAWING NO SK 6513 TE
Physical Verification needed
Description
NUT AS PER DRAWING NO SK 6513 TE
Specification
NUT AS PER DRAWING NO SK 6513 TE
Drawing no.
NO. SK-6513/TE
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
SCREW AS PER DRAWING NO SK 6506 TE
Physical Verification needed
Description
SCREW AS PER DRAWING NO SK 6506 TE
Specification
SCREW AS PER DRAWING NO SK 6506 TE
Drawing no.
NO. SK-6506/TE
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
Webbing Nylon 13 mm BS 2452 N 250 Kgf Yellow
Description
Webbing Nylon 13 mm BS 2452 N (250 Kgf) Yellow
Specification
Tech Part No. ADRDE/QMS/TGTE/W/2022/01 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221481
18
Metre
Webbing Nylon 44 mm BS 1815 Kgf Yellow
Description
Webbing Nylon 44 mm BS 1815 Kgf Yellow
Specification
IS : 4727-2020
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221476
12
Metre
Webbing Nylon 76 mm BS 8025N 818 Kgf OG
Description
Webbing Nylon 76 mm BS 8025N (818 Kgf) OG
Specification
ADRDE/QMS/TGTE/W/2022/08 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221471
12
Metre
Webbing Nylon 51 mm BS 7583N 773 Kgf SG
Description
Webbing Nylon 51 mm BS 7583N (773 Kgf) SG
Specification
ADRDE/QMS/TGTE/W/2022/07 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221437
144
Metre
Webbing Nylon Tubular 16 mm BS 10006 N1020 Kgf Red
Description
Webbing Nylon Tubular 16 mm BS 10006 N (1020 Kgf) Red
Specification
ADRDE/QMS/TGTE/W/2022/05 dtd. 13.01.2022
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221435
4
Metre
Webbing Nylon 25 mm BS 1134 Kgf SG
Description
Webbing Nylon 25 mm BS 1134 Kgf SG
Specification
ADRDE/QMS/TGTE/W/2022/13 dtd. 13.07.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221434
60
Metre
Webbing Nylon 76 mm BS 8025 N 818 Kgf Black
Description
Webbing Nylon 76 mm BS 8025 N (818 Kgf) Black
Specification
ADRDE/QMS/TGTE/W/2022/08 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221426
111
Metre
Webbing Nylon 44 mm 5346 N 545 Kgf SG
Description
Webbing Nylon 44 mm 5346 N (545 Kgf) SG
Specification
ADRDE/QMS/TGTE/W/2022/06 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221425
300
Metre
Webbing Nylon 25 mm BS 4464N 455 Kgf SG
Description
Webbing Nylon 25 mm BS 4464N (455 Kgf) SG
Specification
ADRDE/QMS/TGTE/W/2022/03 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221424
210
Metre
Ribbon Nylon 77 mm BS 3924 N UD
Description
Ribbon Nylon 77 mm BS 3924 N UD
Specification
ADRDE/QMS/TGTE/T/2018/01(a) dtd. 13.01.2022
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221455
134
Metre
Tape Tubular Nylon 25 mm BS 1850 Kgf SG
Description
Tape Tubular Nylon 25 mm BS 1850 Kgf SG
Specification
ADRDE/SPECN/2000/54(e).
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221443
66
Metre
Tape Nylon 13 mm BS 1118N 114 Kgf SG
Description
Tape Nylon 13 mm BS 1118N (114 Kgf), SG
Specification
ADRDE/QMS/TGTE/T/2022/02 dtd. 13.01.2022
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221444
48
Metre
Tape Nylon 19 mm BS 550 Kgf SG
Description
Tape Nylon 19 mm BS 550 Kgf SG
Specification
ADRDE/SPECN/76
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221452
1
Metre
Tape Nylon 25 mm BS 2350 N 240 Kgf Blue
Description
Tape Nylon 25 mm BS 2350 N(240 Kgf) Blue
Specification
ADRDE/QMS/TGTE/T/2021/01/(a) dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221453
15
Metre
Tape Nylon Tubular 26 mm 1850 Kgf Yellow
Description
Tape Nylon Tubular 26 mm 1850 Kgf Yellow
Specification
Updated Specification No. ADRDE/Specn/2000/54(e) received vide ADRDE, Agra letter No. ADRDE/QMS/TG(TE)/24 dtd. 30/07/2021.
Drawing no.
ADRDE/SPECN/2000/54(e)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221454
18
Metre
THERMAL PAD 200X83X2MM LF 7440208328
Physical Verification needed
Specification
3M PART NO.5595
Drawing no.
3M PART NO.5595
Testing / Inspection Facility
74
542
Number
THERMAL PAND 105X150X1 MM LF 2103671031
Physical Verification needed
Description
THERMAL PAND 105X150X1 MM LF 2103671031
Specification
RUBBER ITEM
Drawing no.
AS PER 3M PART NO.5595 OR EQUIVALANT
Testing / Inspection Facility
21
79
Number
Webbing Nylon 76 mm BS 8025N 818 Kgf SG
Description
Webbing Nylon 76 mm BS 8025N (818 Kgf) SG
Specification
ADRDE/QMS/TGTE/W/2022/08 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221470
58
Metre
Webbing Nylon 19 mm 2678N 273 Kgf SG
Description
Webbing Nylon 19 mm 2678N (273 Kgf) SG
Specification
ADRDE/QMS/TGTE/W/2022/02 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221451
72
Metre
Webbing Nylon 19 mm 2678N 273 Kgf Sand
Description
Webbing Nylon 19 mm 2678N (273 Kgf) Sand
Specification
ADRDE/QMS/TGTE/W/2022/02 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221450
72
Metre
Webbing Nylon 19 mm 2678N 273 Kgf OG
Description
Webbing Nylon 19 mm 2678N (273 Kgf) OG
Specification
ADRDE/QMS/TGTE/W/2022/02 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221449
70
Metre
Webbing Nylon 19 mm 2678N 273 Kgf Black
Description
Webbing Nylon 19 mm 2678N (273 Kgf) Black
Specification
ADRDE/QMS/TGTE/W/2022/02 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221448
72
Metre
Webbing Nylon 19 mm 2678N 273 Kgf UD
Description
Webbing Nylon 19 mm 2678N (273 Kgf) UD
Specification
ADRDE/QMS/TGTE/W/2022/02 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221447
48
Metre
Tape Nylon Tubular 26 mm BS 1850 Kgf OG
Description
Tape Nylon Tubular 26 mm BS 1850 Kgf OG
Specification
ADRDE/SPECN/2000/54(e)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221477
12
Metre
Tape Nylon 14 mm BS 230 Kgf SG
Description
Tape Nylon 14 mm BS 230 Kgf SG
Specification
IS: 4228-2023
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221475
18
Metre
Webbing Nylon 25 mm 1134 Kgf Red
Description
Webbing Nylon 25 mm 1134 Kgf Red
Specification
ADRDE/QMS/TGTE/W/2022/13 dtd. 13.07.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221445
48
Metre
Webbing Nylon 38 mm BS 6690 N 682 Kgf SG
Description
Webbing Nylon 38 mm BS 6690 N (682 Kgf) SG
Specification
ADRDE/QMS/TGTE/W/2022/04 dtd. 13.01.2022
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221442
96
Metre
Webbing Nylon 13 mm 2452 N 250 Kgf SG
Description
Webbing Nylon 13 mm 2452 N (250 Kgf) SG
Specification
ADRDE/QMS/TGTE/W/2022/01 dtd. 13.01.2022
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221441
66
Metre
Webbing Nylon 19 mm BS 1818 Kgf Yellow
Description
Webbing Nylon 19 mm BS 1818 Kgf Yellow
Specification
ADRDE/QMS/TGTE/W/2022/04 (a) dtd. 13.01.2022
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221440
90
Metre
STEEL DIA 34 X 355 mm JSS 9510 06 2012 REV 5 CODE REF B T1 CON HOT ROLED PEELED REELED SOFTENED HARDNES 255 HB MAX
Description
Steel dia.34X355mm+2.0 LENGTH VAC. DEGASSED TO JSS:9510-06-2012 (REV.5) CODE REF.B.'T1'COND.HOT ROLLED, PEELED, REELED, SOFTENED. HARDNESS: 255HB MAX. (%S+%P=0.022MAX)(S0.010 & P 0.015MAX Mo. 0.2 MIN. 0.3 MAX. (NOT AS IN JSS:9510)NMIR-IS:4163-82.
Specification
Steel dia.34X355mm+2.0 LENGTH VAC. DEGASSED TO JSS:9510-06-2012 (REV.5) CODE REF.B.'T1'COND.HOT ROLLED, PEELED, REELED, SOFTENED. HARDNESS: 255HB MAX. (%S+%P=0.022MAX)(S0.010 & P 0.015MAX Mo. 0.2 MIN. 0.3 MAX. (NOT AS IN JSS:9510)NMIR-IS:4163-82.
Manufacturing Technology
AS PER SPEC AS PER SPEC AS PER SPEC AS PER SPEC AS PER SPEC
Testing / Inspection Facility
AS PER SPEC AS PER SPEC AS PER SPEC AS PER SPEC AS PER SPEC
70
10000
Kilogram
OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE
Description
OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE
Specification
OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE
Manufacturing Technology
BLOW MOULDING AND INJECTION MOULDING BLOW MOULDING AND INJECTION MOULDING BLOW MOULDING AND INJECTION MOULDING BLOW MOULDING AND INJECTION MOULDING BLOW MOULDING AND INJECTION MOULDING
Testing / Inspection Facility
AS PER DRAWING SPEC AS PER DRAWING SPEC AS PER DRAWING SPEC AS PER DRAWING SPEC AS PER DRAWING SPEC
70
6419
Number
9080079069 HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239
Physical Verification needed
Description
HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239
Specification
HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239
Drawing no.
HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239
Manufacturing Technology
HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239
Testing / Inspection Facility
90
156
Number
LF 7449017055 LRF CABLE ASSY AS PER DRG
Physical Verification needed
Description
LRF CABLE ASSY AS PER DRG NO.ODC-OLF/CTI/T-90/055 NOTE:ITEMS AT SL NO. 1 & 2 OF DRG. NO.ODC-OLF/CTI/T-90/055 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/ VENDOR BEFORE DELIVERY (LF 7449017055)
Specification
LRF CABLE ASSY AS PER DRG NO.ODC-OLF/CTI/T-90/055 NOTE:ITEMS AT SL NO. 1 & 2 OF DRG. NO.ODC-OLF/CTI/T-90/055 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/ VENDOR BEFORE DELIVERY (LF 7449017055)
Drawing no.
LRF CABLE ASSY AS PER DRG NO.ODC-OLF/CTI/T-90/055 NOTE:ITEMS AT SL NO. 1 & 2 OF DRG. NO.ODC-OLF/CTI/T-90/055 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/ VENDOR BEFORE DELIVERY (LF 7449017055)
Testing / Inspection Facility
74
100
Number