1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
COLD DRAWN AND SUB-CRITICALLY ANNEALED (AT TEMP. NOT BELOW 520 DEGREE C) STEEL TUBE OD 50 MM (-0.40MM/-0.00MM) &10 MM THICK (-0.30MM/-0.00MM) AND LENGTH 200 MM +1MM TO SPECN. BS-6323 PT 4:1982 (1990) AND 6023 JUNE 89 AND SUB CATEGORY CFS-8 CARBON PERCENTAGE 0.40-0.45 & UTS 640 MPa (Minimum)
Specification
COLD DRAWN AND SUB-CRITICALLY ANNEALED (AT TEMP. NOT BELOW 520 DEGREE C) STEEL TUBE OD 50 MM (-0.40MM/-0.00MM) &10 MM THICK (-0.30MM/-0.00MM) AND LENGTH 200 MM +1MM TO SPECN. BS-6323 PT 4:1982 (1990) AND 6023 JUNE 89 AND SUB CATEGORY CFS-8 CARBON PERCENTAGE 0.40-0.45 & UTS 640 MPa (Minimum)
OBTURATING COPPER BAND 143mm (+/-0.6 MM) O/D X 10 mm (+/- 0.75 mm) THICK X 450 TO 500 MM LENGTH SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)
Specification
OBTURATING COPPER BAND 143mm (+/-0.6 MM) O/D X 10 mm (+/- 0.75 mm) THICK X 450 TO 500 MM LENGTH SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)
OBTURATING COPPER BAND 149mm (+-0.7 MM) O/D X 13 mm (+2.00 mm/-0.00MM) THICK X 450 TO 500 MM LONG TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)
Specification
OBTURATING COPPER BAND 149mm (+-0.7 MM) O/D X 13 mm (+2.00 mm/-0.00MM) THICK X 450 TO 500 MM LONG TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)
COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION
Specification
COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION
1) Chemical & Mechanical properties as per std. given drawing (if applicable).
2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawing.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawing.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawing.