81
O113-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
CAM XY CALIBRATION ASSY
Physical Verification needed
Description
CAM XY CALIBRATION ASSY AS PER ANNEXURE-C
Specification
CAM XY CALIBRATION ASSY AS PER ANNEXURE-C
Testing / Inspection Facility
74
55
Set
82
110190301
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
Tape Nylon 25point4 1point6 mm LT UD BS 1345 N
Description
Tape Nylon 25.4+ /-1.6 mm LT UD BS 1345 N
Specification
IS : 4228-1979 Except that
a. Width, mm : 25.4+/- 1.6
b. Thickness, mm, max : 0.76
c. Mass, g/m, max : 6.0
d. Ends in full width, min : 120
e. Picks/dm, min: 180.
f. Warp Tex (-5%, +10%) : 23.
g. Weft Tex (-5%, +10%) : 23.
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101786811
3014
Metre
83
HVF/TE0102190209/2019-20/TA/CBOI/SD-OTE dt 03/02/2020
Heavy Vehicle Factory
The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
CONVERTER PAG 1F TY 002 016 TY 002 016 6206501684
Physical Verification needed
Description
CONVERTER PAG 1F TY 002 016 TY 002 016
Specification
CONVERTER PAG 1F TY 002 016 TY 002 016
Testing / Inspection Facility
62
43
Number
84
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
85
3193000956
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Cap Housing Fore Sight for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 022 00DA
Physical Verification needed
Description
Cap Housing Fore Sight for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 022 00DA
Specification
Cap Housing Fore Sight for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 022 00DA
Drawing no.
2101 01 02 01 05 022 00DA
Testing / Inspection Facility
70
7
Number
Steel Blank of Cylinder Gas
Physical Verification needed
Description
Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
Specification
Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
01
1296
Number
ACCESSORIES IN CONTAINER ASSY FOR AK203
Physical Verification needed
Description
ACCESSORIES IN CONTAINER ASSY FOR AK-203 SAF DRG NO. SK 6601*TE
Specification
ACCESSORIES IN CONTAINER ASSY FOR AK-203 SAF DRG NO. SK 6601*TE
Manufacturing Technology
AS PER DRG NO. SK 6601*TE
Testing / Inspection Facility
AS PER DRG NO. SK 6601*TE
70
173737
Number
FEED TRAY INTEGRATED FOR LMG BELT FED
Physical Verification needed
Description
FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Specification
FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Drawing no.
1804 01 05 00 00 001 00DA
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
70
25
Number
RECEIVER FOR GPMG WITHOUT HEAT TREATMENT
Description
RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG.NO. SK-GPMG-6258*
Specification
RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG.NO. SK-GPMG-6258*
Drawing no.
SK-GPMG-6258*
Manufacturing Technology
Machining & Tig Laser Welding
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawing.
70
26
Number
ENGINE BED TO LF NO 6201000287
Physical Verification needed
Specification
HVF/T-90/HULL/266
Drawing no.
HVF/T-90/HULL/266
Manufacturing Technology
AS PER VQC ATTACHED - - - -
Testing / Inspection Facility
AS PER VQC ATTACHED - - - -
62
47
Number
COVER AND SHIELD ASSY FOR WELDING TO LF 6201000358
Physical Verification needed
Description
COVER AND SHIELD ASSY FOR WELDING
Specification
HVF/T-90/HULL/282
Drawing no.
HVF/T-90/HULL/282
Testing / Inspection Facility
62
43
Number
case canvas telescope sight fir 7 62 x 51 mm assault rifle drg no CWC 262 52
Description
case canvas telescope sight fir 7 62 x 51 mm assault rifle drg no CWC 262 52
Specification
case canvas telescope sight fir 7 62 x 51 mm assault rifle drg no CWC 262 52
Testing / Inspection Facility
74
5171
Number
RIGHT HAND LEVER 002
Description
RIGHT HAND LEVER
Specification
AS PER DRAWING
Testing / Inspection Facility
62
57
Number
86
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
9080086797 PULLER WHEEL HUB LEFT DRG O 5120 007803 IFL 8557
Physical Verification needed
Description
9080086797 PULLER WHEEL HUB LEFT DRG O 5120 007803 IFL 8557
Specification
9080086797 PULLER WHEEL HUB LEFT DRG O 5120 007803 IFL 8557
Manufacturing Technology
9080086797 PULLER WHEEL HUB LEFT DRG O 5120 007803 IFL 8557
Testing / Inspection Facility
9080086797 PULLER WHEEL HUB LEFT DRG O 5120 007803 IFL 8557
90
115
Number
0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316
Physical Verification needed
Description
0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316
Specification
0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316
Manufacturing Technology
0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316
Testing / Inspection Facility
0321101125 STEEL ROD 125MM DIA IN STD LENGTH TO SECN AISI 316
70
1143
Kilogram
1789958341 WELDING ELECTRODE 3 15 MM FOR WELDING BETWEEN EN 24 AND MN STEEL IS 3503 1966 MAKE D AND H SECHERON LOTHERM 468M OR ADOR E106 OR ESAB DUROCHROME
Physical Verification needed
Description
1789958341 WELDING ELECTRODE 3 15 MM FOR WELDING BETWEEN EN 24 AND MN STEEL IS 3503 1966 MAKE D AND H SECHERON LOTHERM 468M OR ADOR E106 OR ESAB DUROCHROME
Specification
1789958341 WELDING ELECTRODE 3 15 MM FOR WELDING BETWEEN EN 24 AND MN STEEL IS 3503 1966 MAKE D AND H SECHERON LOTHERM 468M OR ADOR E106 OR ESAB DUROCHROME
Manufacturing Technology
1789958341 WELDING ELECTRODE 3 15 MM FOR WELDING BETWEEN EN 24 AND MN STEEL IS 3503 1966 MAKE D AND H SECHERON LOTHERM 468M OR ADOR E106 OR ESAB DUROCHROME
Testing / Inspection Facility
1789958341 WELDING ELECTRODE 3 15 MM FOR WELDING BETWEEN EN 24 AND MN STEEL IS 3503 1966 MAKE D AND H SECHERON LOTHERM 468M OR ADOR E106 OR ESAB DUROCHROME
90
170
Kilogram
9069110958 Rope Hand Brake Assy to Drg no 5005776 Sht 1 and 2
Physical Verification needed
Description
9069110958 Rope Hand Brake Assy to Drg no 5005776 Sht 1 and 2
Specification
9069110958 Rope Hand Brake Assy to Drg no 5005776 Sht 1 and 2
Manufacturing Technology
9069110958 Rope Hand Brake Assy to Drg no 5005776 Sht 1 and 2
Testing / Inspection Facility
9069110958 Rope Hand Brake Assy to Drg no 5005776 Sht 1 and 2
90
1745
Number
Manufacturing and supply of Frame to Drg No 44P 05101st 4 without Heat Treatment with firms material
Physical Verification needed
Description
Manufacturing and supply of Frame to Drg No 44P 05101st 4 without Heat Treatment with firms material
Specification
Manufacturing and supply of Frame to Drg No 44P 05101st 4 without Heat Treatment with firms material
Testing / Inspection Facility
70
63
Number
BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302
Description
BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302
Specification
AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
2405
Number
SEAR SAFETY ICR 1281 L F 7011606010
Description
SEAR SAFETY (ICR-1281) D.S. CAT No.:1005-001697, D.C.No.22816-SA DATED:20.01.1995 (ICR-1281)
Specification
AS PER DRAWING
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
2787
Number
SEAR TO DS CAT NO 1005 001680 DC NO 27064 SA DATED 03 05 2017 FOR RIFLE 7 62MM SLR ICR 1231 WITHOUT HEAT TREATMENT AND PHOSPHATING WITH FIRMS MATERIAL
Specification
SEAR TO DS CAT NO 1005 001680 DC NO 27064 SA DATED 03 05 2017 FOR RIFLE 7 62MM SLR ICR 1231 WITHOUT HEAT TREATMENT AND PHOSPHATING WITH FIRMS MATERIAL
Manufacturing Technology
SEAR TO DS CAT NO 1005 001680 DC NO 27064 SA DATED 03 05 2017 FOR RIFLE 7 62MM SLR ICR 1231 WITHOUT HEAT TREATMENT AND PHOSPHATING WITH FIRMS MATERIAL
Testing / Inspection Facility
SEAR TO DS CAT NO 1005 001680 DC NO 27064 SA DATED 03 05 2017 FOR RIFLE 7 62MM SLR ICR 1231 WITHOUT HEAT TREATMENT AND PHOSPHATING WITH FIRMS MATERIAL
70
2723
Number
MFG and supply of handle carrying assembly POLYMER AS PER THE DRAWING NO 27P 6300 FOR RIFLE 7 62MM
Description
MFG and supply of handle carrying assembly POLYMER AS PER THE DRAWING NO 27P 6300 FOR RIFLE 7 62MM
Specification
MFG and supply of handle carrying assembly POLYMER AS PER THE DRAWING NO 27P 6300 FOR RIFLE 7 62MM
Manufacturing Technology
MFG and supply of handle carrying assembly POLYMER AS PER THE DRAWING NO 27P 6300 FOR RIFLE 7 62MM MFG and supply of handle carrying assembly POLYMER AS PER THE DRAWING NO 27P 6300 FOR RIFLE 7 62MM
Testing / Inspection Facility
MFG and supply of handle carrying assembly POLYMER AS PER THE DRAWING NO 27P 6300 FOR RIFLE 7 62MM
70
17643
Number
INNER BOOSTER FORGING TO DRG NO 172 40 322 F TO LF NO 3901040055
Physical Verification needed
Description
INNER BOOSTER FORGING TO DRG NO 172 40 322 F
Specification
GOST 4543-71
Testing / Inspection Facility
39
26
Number
9081008472 FABRICATION AND MACHINING ASSISTANCE OF MODIFIED ENGINE HOUSING TO PART NO 1155267 FOR 155 MM DHANUSH GUN AS PER SCOPE OF WORK
Physical Verification needed
Description
FABRICATION AND MACHINING ASSISTANCE OF MODIFIED ENGINE HOUSING TO PART NO. 1155267 FOR 155 MM DHANUSH GUN.(AS PER SCOPE OF WORK).
Specification
FABRICATION AND MACHINING ASSISTANCE OF MODIFIED ENGINE HOUSING TO PART NO. 1155267 FOR 155 MM DHANUSH GUN.(AS PER SCOPE OF WORK).
Manufacturing Technology
As per tender document part A, QAP & Drawings
Testing / Inspection Facility
As per tender document part A, QAP & Drawings
90
30
Whole job
87
ORDFYS/FGK/PV-19/ADV-45
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Finish machining of cylinder as per drg No 1015 000587
Description
Finish machining of cylinder as per drg No 1015 000587
Specification
Finish machining of cylinder as per drg No 1015 000587
Testing / Inspection Facility
72
12
Number
Locking Rear Block for 9X19 mm Machine Pistol
Physical Verification needed
Description
Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA
Specification
Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA
Drawing no.
2101 01 02 00 00 002 00DA
Testing / Inspection Facility
70
7
Number
Lower Housing Assembly for 9X19 mm Machine Pistol as per Drg No 2101 01 02 00 03 000 00DA
Physical Verification needed
Description
Lower Housing Assembly for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 00 03 000 00DA
Specification
Lower Housing Assembly for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 00 03 000 00DA
Drawing no.
2101 01 02 00 03 000 00DA
Testing / Inspection Facility
70
7
Number
6201040044 EPICYCLIC GEAR OF 4TH PLANETARY SET DRG NO 172 40 311
Physical Verification needed
Description
6201040044 EPICYCLIC GEAR OF 4TH PLANETARY SET DRG NO 172 40 311
Specification
6201040044 EPICYCLIC GEAR OF 4TH PLANETARY SET DRG NO 172 40 311
Testing / Inspection Facility
62
100
Number
9910448184 PULLER FOR BUFR SPRNG FIELD TA 33 ILGTA 026 5130 000268
Physical Verification needed
Description
9910448184 PULLER FOR BUFR SPRNG FIELD TA 33 ILGTA 026 5130 000268
Specification
9910448184 PULLER FOR BUFR SPRNG FIELD TA 33 ILGTA 026 5130 000268
Manufacturing Technology
9910448184 PULLER FOR BUFR SPRNG FIELD TA 33 ILGTA 026 5130 000268
Testing / Inspection Facility
9910448184 PULLER FOR BUFR SPRNG FIELD TA 33 ILGTA 026 5130 000268
90
374
Number
9069072215 CAN OIL TO DRG NO 5018449
Physical Verification needed
Description
CAN OIL TO DRG.NO.5018449
Specification
CAN OIL TO DRG.NO.5018449
Manufacturing Technology
CAN OIL TO DRG.NO.5018449
Testing / Inspection Facility
CAN OIL TO DRG.NO.5018449
90
210
Number
9069112530 FUNNEL FILLING CYLINDER TO DRG NO BOF 5000767
Physical Verification needed
Description
FUNNEL FILLING CYLINDER.TO DRG.NO.BOF-5000767
Specification
FUNNEL FILLING CYLINDER.TO DRG.NO.BOF-5000767
Manufacturing Technology
FUNNEL FILLING CYLINDER.TO DRG.NO.BOF-5000767
Testing / Inspection Facility
FUNNEL FILLING CYLINDER.TO DRG.NO.BOF-5000767
90
228
Number
9073100052 MANUFACTURING OF MBT CRADLE TO DRG NO V54801360001 SHT 1 2 3 AS PER SCOPE OF WORK ATTACHED MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MANUFACTURING OF MBT CRADLE TO DRG. NO.V54801360001(SHT 1,2, 3) AS PER SCOPE OF WORK ATTACHED.MATERIAL WILL BE SUPPLIED BY GCF
Specification
MANUFACTURING OF MBT CRADLE TO DRG. NO.V54801360001(SHT 1,2, 3) AS PER SCOPE OF WORK ATTACHED.MATERIAL WILL BE SUPPLIED BY GCF
Manufacturing Technology
MANUFACTURING OF MBT CRADLE TO DRG. NO.V54801360001(SHT 1,2, 3) AS PER SCOPE OF WORK ATTACHED.MATERIAL WILL BE SUPPLIED BY GCF
Testing / Inspection Facility
MANUFACTURING OF MBT CRADLE TO DRG. NO.V54801360001(SHT 1,2, 3) AS PER SCOPE OF WORK ATTACHED.MATERIAL WILL BE SUPPLIED BY GCF
90
56
Number
HOT PRESSED SHAPED STEEL PROFILE No 4267 TO LF No 0185599015
Physical Verification needed
Description
HOT PRESSED SHAPED STEEL PROFILE
DRG No. GOST:B19526(PNO:4267)
LF No.0185599015
PROFILE No.4267
TECHNICAL REQUIREMENT AS PER TY: 03-332-86
GOST : B19526-74, STEEL GRADE:1
Specification
DRG No. GOST:B19526(PNO:4267), PROFILE No.4267
TECHNICAL REQUIREMENT AS PER TY: 03-332-86
GOST : B19526-74, STEEL GRADE:1
Manufacturing Technology
AS PER VENDOR QUALIFICATION CRITERIA
Testing / Inspection Facility
AS PER VENDOR QUALIFICATION CRITERIA & QAP
01
504
Kilogram
PROFILE NO KE 857 TO LF NO 0185599019
Physical Verification needed
Description
PROFILE NO. KE:857
DRG No.GOST:19526-74(KE857)
LF No.0185599019
Specification
PROFILE NO. KE:857
DRG No.GOST:19526-74(KE857)
LF No.0185599019
Manufacturing Technology
AS PER VENDOR QUALIFICATION CRITERIA
Testing / Inspection Facility
AS PER VENDOR QUALIFICATION CRITERIA & QAP
01
1995
Kilogram
ROTARY CONVEYOR BT WITH COUPLING TO LF NO 6201094021
Physical Verification needed
Description
ROTARY CONVEYOR 2.5 BT 0.05 WITH COUPLING TO LF .NO.6201094021/DRG.NO.188.94.026SB-01
Specification
ROTARY CONVEYOR 2.5 BT 0.05 WITH COUPLING TO LF .NO.6201094021 / DRG.NO.188.94.026SB-01
Drawing no.
188.94.026SB-01
Testing / Inspection Facility
62
25
Number
BODY TO LF 3806702892
Physical Verification needed
Description
BODY TO DRG NO: 434.95.080-1/C
Specification
BODY TO LF 3806702892
Drawing no.
434.95.080-1/C
Testing / Inspection Facility
38
300
Number
PROTECTIVE BODY TO LF 3801021158
Physical Verification needed
Description
PROTECTIVE BODY TO DRG NO: 188.21.172/C
Specification
GOST 26645-85
Testing / Inspection Facility
38
34
Number
88
2019DTE121
Ordnance Cable Factory Chandigarh
The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002
Name
Code
Quantity
Approx Value
Select
9912235141 TUBE DR 25 1 2 0 HEAT SHRINKABLE SLEEVE BLACK
Description
9912235141 TUBE DR 25 1 2 0 HEAT SHRINKABLE SLEEVE BLACK
Specification
9912235141 TUBE DR 25 1 2 0 HEAT SHRINKABLE SLEEVE BLACK
Manufacturing Technology
9912235141 TUBE DR 25 1 2 0 HEAT SHRINKABLE SLEEVE BLACK
Testing / Inspection Facility
99
2050
Metre
COAXIAL CABLE RADIALL MAKE PART NORG179BU COAXIAL CABLE C291210007 RADIALL
Description
COAXIAL CABLE RADIALL MAKE PART NO.(RG-179B/U) CO-AXIAL CABLE (C2912100-07) RADIALL
Specification
COAXIAL CABLE RADIALL MAKE PART NO.(RG-179B/U) CO-AXIAL CABLE (C2912100-07) RADIALL
Manufacturing Technology
COAXIAL CABLE RADIALL MAKE PART NO.(RG-179B/U) CO-AXIAL CABLE (C2912100-07) RADIALL
Testing / Inspection Facility
99
1600
Metre
SPACING SLEEVE CASTING TO LF 3806410019
Physical Verification needed
Description
SPACING SLEEVE CASTING TO DRG NO: 54.12.022-2A/C
Specification
SPACING SLEEVE CASTING TO LF 3806410019
Drawing no.
DRG NO: 54.12.022-2A/C
Testing / Inspection Facility
38
790
Number
BODY OF SELECTOR CASTING TO LF 3806419080
Physical Verification needed
Description
BODY OF SELECTOR CASTING TO DRG NO: 172.63.075/C
Specification
BODY OF SELECTOR CASTING TO LF 3806419080
Drawing no.
DRG NO: 172.63.075/C
Testing / Inspection Facility
38
26
Number
89
MPV/Welding Electrode
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
Name
Code
Quantity
Approx Value
Select
BP GLASS ASSEMBLY
Physical Verification needed
Description
BP GLASS ASSY AS PER SPECIFICATION NO. VFJ/R&D/SP/LBPV/GLASS/24, DTD. 01.07. 2024.
Specification
VFJ/R&D/SP/LBPV/GLASS/24, DTD. 01.07. 2024
Drawing no.
LBPV_01 01 00, LBPV_02 01 00, LBPV_03 01 00, LBPV_04 01 00, LBPV_06 01 00, LBPV_07 01 00, LBPV_08 01 00, LBPV_11 01 00.
Manufacturing Technology
As per Specification and Drawings.
Testing / Inspection Facility
As per Specification and Drawings.
90
1
Set
6201040056 INNER BOOSTER DRG NO 172 40 323
Physical Verification needed
Description
6201040056 INNER BOOSTER DRG NO 172 40 323
Specification
6201040056 INNER BOOSTER DRG NO 172 40 323
Testing / Inspection Facility
62
100
Number
6206401085 GEAR CROWN 3RD PLANETORY GEAR SET DRG NO 172 40 247
Physical Verification needed
Description
6206401085 GEAR CROWN 3RD PLANETORY GEAR SET DRG NO 172 40 247
Specification
6206401085 GEAR CROWN 3RD PLANETORY GEAR SET DRG NO 172 40 247
Testing / Inspection Facility
62
300
Number
20mm Cast Cartridge extractor to Drg No 44P 03021st 2 with firms material
Physical Verification needed
Description
20mm Cast Cartridge extractor to Drg No 44P 03021st 2 with firms material
Testing / Inspection Facility
70
126
Number
SHEET STEEL 15 8MMX1250MMX3000MM LENGTH LF No 0122022615
Physical Verification needed
Description
SHEET STEEL 15, 8MMX1250MMX3000 LENGTH, GOST:1577-70,
DRG No.GOST:19903-74(8MM)
LF No.0122022615
Gr.410WA TO IS:2062-92/E-250A TO IS 2062-11
Specification
SHEET STEEL 15, 8MMX1250MMX3000 LENGTH, GOST:1577-70,
DRG No.GOST:19903-74(8MM)
LF No.0122022615
Gr.410WA TO IS:2062-92/E-250A TO IS 2062-11
Drawing no.
DRG No.GOST:19903-74(8MM) ,GOST:1577-70, Gr.410WA TO IS:2062-92/E-250A TO IS 2062-11
Manufacturing Technology
AS PER VENDOR QUALIFICATION CRITERIA
Testing / Inspection Facility
AS PER VENDOR QUALIFICATION CRITERIA & QAP
01
25421
Kilogram
PLATE GR ST 40 3 T 12MMX1400MMX3000MM LG LF No 0141022632
Physical Verification needed
Description
PLATE GR:ST 40-3-T,12MMX1400MMX3000MM LG, DRAWING No.GOST:19903-74(12), LF No.0141022632 HOT ROLLED & ANNEALED
Specification
PLATE GR:ST 40-3-T,12MMX1400MMX3000MM LG, DRAWING No.GOST:19903-74(12), LF No.0141022632 HOT ROLLED & ANNEALED
Manufacturing Technology
AS PER VENDOR QUALIFICATION CRITERIA AND QAP
Testing / Inspection Facility
AS PER VENDOR QUALIFICATION CRITERIA AND QAP
01
26177
Kilogram
SENDING UNIT ASSEMBLY DRAWING TO LF NO 6201070005
Physical Verification needed
Description
SENDING UNIT ASSEMBLY DRAWING / 188.70.090CB-6CB
Specification
SENDING UNIT ASSEMBLY DRAWING / 188.70.090CB-6CB
Testing / Inspection Facility
62
20
Number
90
107/028/PV(A)/EOI/19-20
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
Name
Code
Quantity
Approx Value
Select
81 LRM BREECH BLOCK FORGING AS PER DRG NO 02 01 00 01 F
Physical Verification needed
Description
81 LRM BREECH BLOCK FORGING AS PER DRG NO 02.01.00.01 (F)
Specification
AS PER DRAWING
Testing / Inspection Facility
70
10
Number
81 LRM BARREL FORGING AS PER DRG NO 02 00 00 01 F
Physical Verification needed
Description
81 LRM BARREL FORGING AS PER DRG NO. 02.00.00.01 (F)
Specification
AS PER DRAWING
Drawing no.
02.00.00.01 (F)
Testing / Inspection Facility
70
10
Number
CARDIAN SHAFT ASSY DRG NO 172 41 019 CB CB TO LF NO 6206402009
Physical Verification needed
Description
CARDIAN SHAFT ASSY / DRG .NO. 172 .41 .019 CB CB TO LF. NO. 6206402009
Specification
CARDIAN SHAFT ASSY / DRG .NO. 172 .41 .019 CB CB TO LF. NO. 6206402009
Drawing no.
172.41.019CBCB
Testing / Inspection Facility
62
13
Number
PROPELLER SHAFT ASSY DRG NO 172 41 018 CB CB TO LF NO 6206402008
Physical Verification needed
Description
PROPELLER SHAFT ASSY /DRG .NO. 172 .41. 018 CB CB TO LF. NO .6206402008
Specification
PROPELLER SHAFT ASSY /DRG .NO. 172 .41. 018 CB CB TO LF. NO .6206402008
Drawing no.
172.41.018CBCB
Testing / Inspection Facility
62
12
Number
CONTROL UNIT BYF 2 TECHNICAL SPECIFICATIONS TO LF NO 6201070204
Physical Verification needed
Description
CONTROL UNIT BYF-2 TECHNICAL SPECIFICATIONS / BYF2.000TY
Specification
CONTROL UNIT BYF-2 TECHNICAL SPECIFICATIONS / BYF2.000TY
Testing / Inspection Facility
62
50
Number
14 point 5mm cast cartridge extractor to Drg No 44P 14023 st 3 with firms material required for 14 point 5 and 20mm
Physical Verification needed
Description
14 point 5mm cast cartridge extractor to Drg No 44P 14023 st 3 with firms material required for 14 point 5 and 20mm
Drawing no.
44P 14023 st 3
Testing / Inspection Facility
70
126
Number
SECTOR FRONT COVER FNSH View DRG NOY25646A 00 FOR PEDESTAL ASSY OF SRCG
Description
SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG
Specification
SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG
Manufacturing Technology
SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG
Testing / Inspection Facility
SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG
74
34
Number
MAGAZINE BOX ASSYAS PER DRG Y 25676A 00 FOR MAGAZINE ASSY OF SRCG
Description
MAGAZINE BOX ASSYAS PER DRG Y 25676A 00 FOR MAGAZINE ASSY OF SRCG
Specification
MAGAZINE BOX ASSYAS PER DRG Y 25676A 00 FOR MAGAZINE ASSY OF SRCG
Testing / Inspection Facility
MONITERING INSTRUCTION QMI
74
34
Number
RECEIVER TO DRG NO TRD 02 0001
Physical Verification needed
Description
RECEIVER TO DRG NO TRD-02-0001
Specification
AS PER DRAWING
Testing / Inspection Facility
70
714
Number
9081008452 MACHINING OF NUT TO DRAWING NO 4071771 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF NUT TO DRAWING NO.4071771. (MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF NUT TO DRAWING NO.4071771. (MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per tender document part A, QAP & Drawings
Testing / Inspection Facility
As per tender document part A, QAP & Drawings
90
23
Number
9081008451 MACHINING OF BUFFER YOKE ATTACHMENT TO DRAWING NO 4071772 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF BUFFER-YOKE ATTACHMENT TO DRAWING NO.4071772. ( MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF BUFFER-YOKE ATTACHMENT TO DRAWING NO.4071772. ( MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per Tender Document Part A, QAP & Drawings
Testing / Inspection Facility
As per Tender Document Part A, QAP & Drawings
90
63
Number
9081008450 MACHINING OF PISTON TO DRAWING NO 4071780 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF PISTON TO DRAWING NO.4071780. (MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF PISTON TO DRAWING NO.4071780. (MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per tender document part A, QAP & Drawings
Testing / Inspection Facility
As per tender document part A, QAP & Drawings
90
109
Number
9081008449 PISTON TO DRAWING NO 4071779 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
PISTON TO DRAWING NO.4071779.(MATERIAL WILL BE SUPPLIED BY GCF).
Specification
PISTON TO DRAWING NO.4071779.(MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per Tender Document Part A, QAP & Drawings
Testing / Inspection Facility
As per Tender Document Part A, QAP & Drawings
90
131
Number
9081008448 MACHINING OF CYLINDER PRESSURE CHAMBER TO DRAWING NO 4071752 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF CYLINDER PRESSURE CHAMBER TO DRAWING NO.4071752.(MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF CYLINDER PRESSURE CHAMBER TO DRAWING NO.4071752.(MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per tender document part A, QAP & Drawings
Testing / Inspection Facility
As per tender document part A, QAP & Drawings
90
33
Number
9081008447 MACHINING OF CONTROL ROD TO DRAWING NO 3048512 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF CONTROL ROD TO DRAWING NO. 3048512 (MATERIAL WILL BE SUPPLIED BY GCF)
Specification
MACHINING OF CONTROL ROD TO DRAWING NO. 3048512 (MATERIAL WILL BE SUPPLIED BY GCF)
Manufacturing Technology
As per tender document part A, QAP & Drawings
Testing / Inspection Facility
As per tender document part A, QAP & Drawings
90
33
Number
9081008446 MACHINING OF PISTON ROD TO DRAWING NO 4082470 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF PISTON ROD TO DRAWING NO.4082470.(MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF PISTON ROD TO DRAWING NO.4082470.(MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per tender document part A, QAP & Drawings
Testing / Inspection Facility
As per tender document part A, QAP & Drawings
90
79
Number
6206210059 BRACKET DRG NO 172 27 057
Physical Verification needed
Description
6206210059 BRACKET DRG NO 172 27 057
Specification
6206210059 BRACKET DRG NO 172 27 057
Testing / Inspection Facility
62
150
Number
6206408071 GEAR WHEEL DRG NO 172 47 142 1
Physical Verification needed
Description
6206408071 GEAR WHEEL DRG NO 172 47 142 1
Specification
6206408071 GEAR WHEEL DRG NO 172 47 142 1
Testing / Inspection Facility
62
300
Number
9081008457 MACHINING OF BEARING HOUSING TO DRAWING NO 2022858 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF BEARING HOUSING TO DRAWING NO.2022858. (MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF BEARING HOUSING TO DRAWING NO.2022858. (MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per tender document part A, QAP & Drawings
Testing / Inspection Facility
As per tender document part A, QAP & Drawings
90
30
Number
9081008456 MACHINING OF PISTON TO DRAWING NO 4070956 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF PISTON TO DRAWING NO.4070956.(MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF PISTON TO DRAWING NO.4070956.(MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per tender document part A, QAP & Drawings
Testing / Inspection Facility
As per tender document part A, QAP & Drawings
90
40
Number
9081008455 MACHINING OF EAR TO DRAWING NO 3047653 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF EAR TO DRAWING NO.3047653. (MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF EAR TO DRAWING NO.3047653. (MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per tender document part A, QAP & Drawings
Testing / Inspection Facility
As per tender document part A, QAP & Drawings
90
20
Number
9081008454 MACHINING OF PISTON ROD TO DRAWING NO 3050105 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF PISTON ROD TO DRAWING NO.3050105.(MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF PISTON ROD TO DRAWING NO.3050105.(MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per tender document part A, QAP & Drawings
Testing / Inspection Facility
As per tender document part A, QAP & Drawings
90
40
Number
9081008453 MACHINING OF CYLINDER TO DRAWING NO 3050104 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF CYLINDER TO DRAWING NO.3050104.(MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF CYLINDER TO DRAWING NO.3050104.(MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per Tender Document Part A, QAP & Drawings
Testing / Inspection Facility
As per Tender Document Part A, QAP & Drawings
90
30
Number
9081008459 MACHINING OF TRAIL SPADE TO DRAWING NO 3048309 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF TRAIL SPADE TO DRAWING NO.3048309.(MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF TRAIL SPADE TO DRAWING NO.3048309.(MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per tender document part A, QAP & Drawings
Testing / Inspection Facility
As per tender document part A, QAP & Drawings
90
60
Number
9081008458 MACHINING OF END COVER TO DRAWING NO 4071725 MATERIAL WILL BE SUPPLIED BY GCF
Physical Verification needed
Description
MACHINING OF END COVER TO DRAWING NO.4071725. (MATERIAL WILL BE SUPPLIED BY GCF).
Specification
MACHINING OF END COVER TO DRAWING NO.4071725. (MATERIAL WILL BE SUPPLIED BY GCF).
Manufacturing Technology
As per Tender Document Part A, Drawings & QAP
Testing / Inspection Facility
As per Tender Document Part A, Drawings & QAP
90
15
Number
MFG AND SUPPLY OF TUBE RETURN SPRING TO DRG NO ICR 1311 WITH OFT MATERIAL DC NO 27069 SA DT 05 05 2017 DS CAT NO 1005 001642 FOR RIFLE SLR
Description
MFG AND SUPPLY OF TUBE RETURN SPRING TO DRG NO ICR 1311 WITH OFT MATERIAL DC NO 27069 SA DT 05 05 2017 DS CAT NO 1005 001642 FOR RIFLE SLR
Specification
MFG AND SUPPLY OF TUBE RETURN SPRING TO DRG NO ICR 1311 WITH OFT MATERIAL DC NO 27069 SA DT 05 05 2017 DS CAT NO 1005 001642 FOR RIFLE SLR
Manufacturing Technology
MFG AND SUPPLY OF TUBE RETURN SPRING TO DRG NO ICR 1311 WITH OFT MATERIAL DC NO 27069 SA DT 05 05 2017 DS CAT NO 1005 001642 FOR RIFLE SLR
Testing / Inspection Facility
MFG AND SUPPLY OF TUBE RETURN SPRING TO DRG NO ICR 1311 WITH OFT MATERIAL DC NO 27069 SA DT 05 05 2017 DS CAT NO 1005 001642 FOR RIFLE SLR
10
7805
Number
FOLDING BUTT ASSEMBLY FOR GPMG DRG No SK GPMG 6321 REF DRG NO 1804 10 00 00 00 001 00DA
Physical Verification needed
Description
FOLDING BUTT ASSEMBLY FOR GPMG 7.62X51MM DRG. NO.SK- GPMG-6321,(REF DRG NO 1804 10 00 00 00 001 00DA
Specification
FOLDING BUTT ASSEMBLY FOR GPMG 7.62X51MM DRG. NO.SK- GPMG-6321,(REF DRG NO 1804 10 00 00 00 001 00DA
Drawing no.
DRG. NO.SK-GPMG-6321,(REF DRG NO 1804 10 00 00 00 001 00DA)
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawing.
70
100
Number
FABRICATION OF SUB ASSEMBLIES OF PARACHUTE AS PER OPF DRAWING NO A F 0A 00D
Description
FABRICATION OF SUB-ASSEMBLIES OF PARACHUTE AS PER OPF DRAWING NO. A.F.0A- 00D
Specification
FABRICATION OF SUB ASSEMBLIES OF PARACHUTE AS PER OPF DRAWING NO A F 0A 00D
Manufacturing Technology
AS PER DRAWING/SPECIFICATION
Testing / Inspection Facility
AS PER DRAWING/SPECIFICATION
2110025137
80
Number