SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

BRASS SEAMLESS TUBE TO EXTRUSION( DRG. NO. M-9547A) REQUIRED FOR PR. 19B MATERIAL SHOULD BE AS PER PHYSICAL AND CHEMICAL STD. LAID DOWN IN THE GSF DRG. NO. M-9547

BRASS SEAMLESS TUBE TO EXTRUSION( DRG. NO. M-9547A) REQUIRED FOR PR. 19B

BRASS TUBE(M-10583B) TO SPEC. JSS 9535-02:1995 (REV. NO.1) UNANNEALED AND STRESS RELIEVED FOR PR. 18A MAGAZINE(DRG. NO.IQX-192) THE TUBING MUST BE SUBJECTED TO AN INTERNAL HYDRAULIC PRESSURE OF 55.13 MPa AND TO ENSURE MATERIAL IS FREE FROM CRACKS, PERMANENT SET AND OTHER DEFECTS.

BRASS TUBE(M-10583B) TO SPEC. JSS 9535-02:1995 (REV. NO.1) UN ANNEALED AND STRESS RELIEVED

• As per Attachment

• As per Attachment

BRASS PRESSING BLANKS TO DRG. NO. 1896/1G

BRASS PRESSING BLANKS TO DRG. NO. 1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG. NO. QX-1709 DC 36123-A. DT. 06.06.96

ZINC BASE ALLOY DIE CAST FOR "HEAD FLASH IGNITER" TO CASTING DRG. NO-1612 C

ZINC BASE ALLOY DIE CAST FOR "HEAD FLASH IGNITER" TO CASTING DRG. NO-1612 C

Zinc Base Alloy Die Cast "Trigger" to DRG. NO.-1618/1

Zinc Base Alloy Die Cast "Trigger" to DRG. NO.-1618/1

DIE CAST (ZINC BASE ALLOY) TO DRG. NO.-1617/A

DIE CAST (ZINC BASE ALLOY) TO DRG. NO.-1617/A

DIE CAST (ZINC BASE ALLOY) DRG. NO-1616 B

DIE CAST (ZINC BASE ALLOY) DRG. NO-1616 B

DRG NO 1651/A OF HEAD (PART NO IQX-310) FOR FMC 605M

DRG NO 1651/A OF HEAD (PART NO IQX-310) FOR FMC 605M

FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)

FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

SPIRAL TO DRG. NO.bw 8.3.67.009(GSF SK. NO. TF-026) FOR FUZE A 670 M

DRG. NO.bw 8.367.009 FOR FUZE A 670 M(GSF SK. NO. TF-026)

COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION

COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION

• as per attachment

• as per attachment

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)

COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

COPPER TUBE TO SIZE 39.40+0.35 I/DX3.5+0.25 WALL THICKNESS LENGTH OF 1.5 TO 4 MTR

TO SPEC JSS-4710-01 GRADE 4 WITH CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER DRG. NO-M-1895

COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)

COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)

• As per attachment

• As per attachment

ALUMINIUM ROD 22.225 MM +/- 0.25 MM DIA TO SPECN. IS:733-1983 DESIG.64430 IN " WP" CONDITION. PPGG NOT EXCEEDING 1.5 MM ON RADIUS & 2 MTRS TO 3 MTRS LONG

ALUMINIUM ROD 22.225 MM +/- 0.25 MM DIA TO SPECN. IS:733-1983 DESIG.64430 IN " WP" CONDITION. PPGG NOT EXCEEDING 1.5 MM ON RADIUS & 2 MTRS TO 3 MTRS LONG

• AS PER ATTACHMENT

• AS PER ATTACHMENT

AL. ROD 22+/-0.25 mm TO SPECIFICATIONIS: 733-1983 DESIG. 64430 IN "WP" CONDITION .

AL. ROD 22+/-0.25 mm TO SPECIFICATIONIS: 733-1983 DESIG. 64430 IN "WP" CONDITION . PPGG NOT EXCEEDING 1.5 MM ON RADIUS

AL. ALLOY ROD 65 mm DIA

AL. ALLOY ROD 65 mm DIA TO SPEC IS:733:1983 GR. 24345 IN "W/P" CONDITION. MAT. CLASS B OF IS:3965-1981, PPGG SHALL BE 4 mm MAX IN RADIUS IN STRAIGHT LENGTH 1.5 TO 3 MTRS.

AS PER DRG. & SPECIFICATION

AS PER DRG. & SPECIFICATION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94

MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94

• AS PER ATTACHMENT

• AS PER ATTACHMENT

DRG. NO. F-1321-425450C FOR FUZE FFV 64C

DRG. NO. F-1321-425450C FOR FUZE FFV 64C

FORGED BLANK FOR ILLUMINATING TIME FUZE BODY TO GSF DRG.NO. F-2316A SPECN.IS:734 GR.24345 WP OR BS: 1472 GR. 2014 S TF

AS PER DRG. NO. F-2316 A

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

• AS PER ATTACHMENT

• AS PER ATTACHMENT

AS PER DRG. NO. M-11022 A

AS PER DRG. NO. M-11022 A

Plastic Liner to GSF SK NO. M-6810/1

Plastic Liner to GSF SK NO. M-6810/1

• AS PER ATTACHMENT

• AS PER ATTACHMENT

As Per Requirements & Specifications

As Per Requirements & Specifications

FABRICATION OF SOCKS MEN'S WOOL DARK OG Specification:- Fabrication (Knitting, Linking, Asst. to Linking, Washing, Pressing, Checking and Darning) of Socks Men’s Wool Dark OG, As per Specification no. PROV/OCFS/SOCKS/ARMY/NEW 64(a) & ANNEXURE-“A1”

FABRICATION OF SOCKS MEN'S WOOL DARK OG Specification:- Fabrication (Knitting, Linking, Asst. to Linking, Washing, Pressing, Checking and Darning) of Socks Men’s Wool Dark OG, As per Specification no. PROV/OCFS/SOCKS/ARMY/NEW 64(a) & ANNEXURE-“A1”

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

As per Requirements & Specifications

As per Requirements & Specifications

SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR]

SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR]

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

FABRICATION OF OVERALL COMBINATION GREENISH KHAKI

FABRICATION OF OVERALL COMBINATION GREENISH KHAKI. SWO PART No. 60158 SPECIFICATION: No. IND/NAVY/TC/4660 WITH AMENDMENT NO.1 NOTE: A) CUT COMPONENTS & GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF JCD ARMY LOGO (MODIFIED) and FABRICATION OF TCD ARMY LOGO (MODIFIED)

FABRICATION OF JACKET COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO (MODIFIED). SWO PART II No.60234 SPECIFICATION No : OCFAV/Garment/001(b) MAKE & SHAPE : AS PER APPROVED SAMPLE NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION. FABRICATION OF TROUSER COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO (MODIFIED). SWO Pt II No.60233 SPECIFICATION No. OCFAV/Garment/002(b) MAKE & SHAPE : AS PER APPROVED SAMPLE NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION.

FABRICATION OF SHIRT PW PV DD KHAKI H/S and FABRICATION OF TROUSERS PW PV DD KHAKI

FABRICATION OF SHIRT PW PV DD KHAKI H/S (NEW DESIGN) SWO PART II No. 10236/60236 SPECIFICATION : 1) DESIGN & DIMENSION : AS PER SPECN NO.IND/TC/4698(a) 2) CERTIFIED SAMPLE & SCH.No. CQA (T&C)/TC-15/8(d). NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED. FABRICATION OF TROUSER PW PV DD KHAKI SWO PART II No.60203 SPECIFICATION : 1) DIMENSION : AS PER SPECN NO.IND/TC/4630(L) 2) CERTIFIED SAMPLE AND SCH.NO.CQA(T&C)/TC-15/8(d). NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF SHORTS COTTON LIGHT OG

FABRICATION OF SHORTS COTTON LIGHT OG SWO PART II No.60215 SPECIFICATION: 1) DIMENSION : AS PER SPECN NO. PROV/OCFAV/GARMENT/005 2) CERTIFIED SAMPLE : AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS & GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Coat ECC

FABRICATION OF COAT EXTREME COLD CLIMATE SWO PART II No.60231 SPECIFICATION No. IND/TC/4587(C) NOTE: A) CUT COMPONENTS & GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

29P 0020*2

29P 0020*2

Drg. No.OFT / TEND R-6542-001*9

Drg. No.OFT / TEND R-6542-001*9