DoO(C&S) Vendor Panel | Page ,28e0b7368043f8a6d6caa96fc9ca3a5d95615e1b

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofbqcvrcell[dot]ofb[at]ofb[dot]gov[dot]in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

26401

110MMETT17000813 (TE NO.110160509)

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
CORDAGE NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D Description 4020-000298 CORDAGE NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D as per Specification Specification SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the material shall conform to the sealed pattern held in the custody of The Controller, CQAT&C, Kanpur (iv) hank length should be 270 + 05. - 00 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101116209	256050 Metre

26402

T.E. NO. 160174FGFO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
Machined Components Description As per GCF Drawing/Specn. Specification As per GCF Drawing/Specn. 160174FGFO.docx Drawing no. Manufacturing Technology Testing / Inspection Facility	90	(1) 29 NOS. (2) 1418 NOS. (3) 551 NOS. Number

26403

110MMETT17000812 (TE NO.110160508)

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS Description FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS SPECN NO ADRDE/SPECN/1983/14-OPF KANPUR Specification SPECN NO ADRDE/SPECN/1983/14 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221979	111325 Metre
FABRIC NYLON LT WT 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 AS PER IS SPECN NO IS 5 1994 122 CM WIDTH Description FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH Specification SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2 Read-200 g/cm2 Drawing no. Manufacturing Technology As Per Specification/Drawing IS_4726-1984.pdf Testing / Inspection Facility As Per Specification/Drawing 4726_1984.pdf	2101221981	111529 Metre

26404

T.E. NO. 160183FGFO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
Machined Components Description As per GCF Drawing/Specn. Specification As per GCF Drawing/Specn. 160183FGFO.docx Drawing no. Manufacturing Technology Testing / Inspection Facility	90	50 NOS. Number

26405

T.E. NO. 160127L7FO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
Machined Components Description As per GCF Drawing/Specn. Specification As per GCF Drawing/Specn. 160127L7FO.docx Drawing no. Manufacturing Technology Testing / Inspection Facility	90	(1) 90 NOS. (2) 102 NOS. Number

26406

T.E. NO. 160124L7FO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
Machined Components Description As per Drg./Specification Specification As per Drg./Specification 160124L7FO.docx Drawing no. Manufacturing Technology Testing / Inspection Facility	90	(1) 50 NOS. (2) 108 NOS. Number

26407

T.E. NO. 160122L7FO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
Machined Components Description As per GCF Drawing/Specn. Specification As per GCF Drawing/Specn. 160122L7FO.docx Drawing no. Manufacturing Technology Testing / Inspection Facility	90	96 NOS. Number

26408

T.E. NO. 160017L7FO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
Machined Components Description As per GCF Drawing/Specn. Specification As per GCF Drawing/Specn. 160117L7FO.docx Drawing no. Manufacturing Technology Testing / Inspection Facility	90	115 NOS. Number

26409

T.E. NO. 160115L7FO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
Machined Components Description As per GCF Drawing/Specn. Specification As per GCF Drawing/Specn. 160115L7FO.docx Drawing no. Manufacturing Technology Testing / Inspection Facility	90	113 NOS. Number

26410

T.E. NO. 160114L7FO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
Machined Components Description As per GCF Drawing/Specn. Specification As per GCF Drawing/Specn. 160114L7FO.docx Drawing no. Manufacturing Technology Testing / Inspection Facility	90	31 NOS. Number

26411

T.E. NO. 160131L7FO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
Machined Components Description As per GCF Drawing/Specn. Specification As per GCF Drawing/Specn. 160131L7FO.docx Drawing no. Manufacturing Technology Testing / Inspection Facility	90	53 Number

26412

T.E. NO. 160201GSPO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
Sheets Description As per GCF/Drg/Size/Specn/IS Specification As per GCF/Drg/Size/Specn/IS 160201GSPO.docx Drawing no. Manufacturing Technology Testing / Inspection Facility	70	263964 Kilogram

26413

ORDFYS/OFT/DAVP/16-17/MMR/E-PROC/TAR/01

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
MAGAZINE ASSY AS PER DRG No K 7000 WITH FIRMS MATERIAL Description MAGAZINE ASSY AS PER DRG No. K 7000 WITH FIRM'S MATERIAL Specification AS PER DRG No. K 7000 WITH FIRM'S MATERIAL Magazine_Assy_K_7000_Volume_2.pdf Drawing no. K 7000 Magazine_Assy_K_7000_volume_1.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE TESTING.pdf	70	1307 Number

26414

OFD_O080-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
MACHINING OF COVER TO DRG.NO.MCT-2471/1 CASTING WILL BE SUPPLIED BY ORD.FACT. DEHARDUN. Description MACHINING OF COVER TO DRG.NO.MCT-2471/1 CASTING WILL BE SUPPLIED BY ORD.FACT. DEHARDUN. Specification MACHINING OF COVER TO DRG.NO.MCT-2471/1 CASTING WILL BE SUPPLIED BY ORD.FACT. DEHARDUN. Drawing no. MCT-2471/1 MCT_2471_1.jpg Manufacturing Technology Testing / Inspection Facility	00	47 Number

26415

OFD_O069-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
METAL CASE TO DRG NO.,MCT-1999 BORE MUZZAL SIGHT,(CONSIST.OF MCT-1978 3 SHEETS,MCT-1972 3 SHEETS,PLATE IDENTIF ICATION MCT-1985)AND FASTNER ASSY TO DRG NO.IRDE-379/SA(MCT-1983 CONSISTING OF 21 DRGS) TOTAL DRGS-29 SHEETS Description METAL CASE TO DRG NO.,MCT-1999 BORE MUZZAL SIGHT,(CONSIST.OF MCT-1978 3 SHEETS,MCT-1972 3 SHEETS,PLATE IDENTIF ICATION MCT-1985)AND FASTNER ASSY TO DRG NO.IRDE-379/SA(MCT-1983 CONSISTING OF 21 DRGS) TOTAL DRGS-29 SHEETS Specification METAL CASE TO DRG NO.,MCT-1999 BORE MUZZAL SIGHT,(CONSIST.OF MCT-1978 3 SHEETS,MCT-1972 3 SHEETS,PLATE IDENTIF ICATION MCT-1985)AND FASTNER ASSY TO DRG NO.IRDE-379/SA(MCT-1983 CONSISTING OF 21 DRGS) TOTAL DRGS-29 SHEETS Drawing no. MCT-1999 MCT_1999.pdf Manufacturing Technology Testing / Inspection Facility	74	255 Number

26416

OFD_O083-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7 Description TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7 Specification TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7 Drawing no. MCT-2459 MCT_2459.jpg Manufacturing Technology Testing / Inspection Facility	74	212 Number

26417

OFD_O082-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
MACHINING OF BRACKET TO DRG.NO. MCT-2435 TO 2438 CASTING WILL BE SUPPLIED BY ORD.FY.D.DUN. Description MACHINING OF BRACKET TO DRG.NO. MCT-2435 TO 2438 CASTING WILL BE SUPPLIED BY ORD.FY.D.DUN. Specification MACHINING OF BRACKET TO DRG.NO. MCT-2435 TO 2438 CASTING WILL BE SUPPLIED BY ORD.FY.D.DUN. Drawing no. MCT-2435 TO 2438 Drawings_B.docx Manufacturing Technology Testing / Inspection Facility	74	182 Number

26418

OFD_O078-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
PLATE TO DRG.N0.MCT-2473 Description PLATE TO DRG.N0.MCT-2473 Specification PLATE TO DRG.N0.MCT-2473 Drawing no. MCT-2473 MCT_2473.jpg Manufacturing Technology Testing / Inspection Facility	74	100 Number

26419

OFD_O081-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
CELL TO DRG.NO. , MCT-3237 FOR D-7 Description CELL TO DRG.NO. , MCT-3237 FOR D-7 Specification CELL TO DRG.NO. , MCT-3237 FOR D-7 Drawing no. MCT-3237 MCT_3237.jpg Manufacturing Technology Testing / Inspection Facility	74	100 Number

26420

OFD_O079-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
HEAD MCT-2445 Description HEAD MCT-2445 Specification HEAD MCT-2445 Drawing no. MCT-2445 MCT_2445.jpg Manufacturing Technology Testing / Inspection Facility	74	200 Number

26421

OFD_O193-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
BLOCK TO DRG.NO. MCT-2439/1 Description BLOCK TO DRG.NO. MCT-2439/1 Specification BLOCK TO DRG.NO. MCT-2439/1 Drawing no. MCT-2439/1 MCT_2439_1.jpg Manufacturing Technology Testing / Inspection Facility	74	191 Number
JEWELL TO DRG NO. MCT-794 Description JEWELL TO DRG NO. MCT-794 Specification JEWELL TO DRG NO. MCT-794 Drawing no. MCT-794 MCT_794.jpg Manufacturing Technology Testing / Inspection Facility	00	23 Number

26422

OFD_O102-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
LEVER DRG.NO.CII-125 Description LEVER DRG.NO.CII-125 Specification LEVER DRG.NO.CII-125 Drawing no. CII-125 CIA_OS_560_PIVOT.jpg Manufacturing Technology Testing / Inspection Facility	74	758 Number

26423

OFD_O226-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
RETICLE, AS PER DRG.NO.IRDE-342/9 FOR SIGHT BORE MUZZLE 125MM Description RETICLE, AS PER DRG.NO.IRDE-342/9 FOR SIGHT BORE MUZZLE 125MM Specification RETICLE, AS PER DRG.NO.IRDE-342/9 FOR SIGHT BORE MUZZLE 125MM Drawing no. IRDE-342/9 IRDE_342_9_RETICLE_OPTICAL_INSTT.jpg Manufacturing Technology Testing / Inspection Facility	26	180 Number

26424

OFD_O066-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7 Description TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7 Specification TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7 Drawing no. MCT-2459 MCT_2459.jpg Manufacturing Technology Testing / Inspection Facility	74	113 Number

26425

ORDFYS/OCFAVDAVP/03/17-18/15/01

Ordnance Clothing Factory Avadi

The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054

Name	Code	Quantity	Approx Value	Select
CLOTH POLYESTER & COTTON COMBINATION OF PLAIN WEAVE AND MODIFIED PLAIN WEAVE SAGE GREEN 150 CM WIDTH (MINIMUM WIDTH EXCLUDING SELVEDGES). Description CLOTH POLYESTER & COTTON COMBINATION OF PLAIN WEAVE AND MODIFIED PLAIN WEAVE SAGE GREEN 150 CM WIDTH (MINIMUM WIDTH EXCLUDING SELVEDGES). Specification IAFS 09149:2016 WITH AMDT NO.5. REFER ATTACHED DOCUMENT "SPECIFICATION" Drawing no. Manufacturing Technology Testing / Inspection Facility	21	298300 Metre
Cloth Cotton Light Blue 142cms. Description IS:2970 Type-II Specification IS:2970 Type-II Drawing no. Manufacturing Technology Testing / Inspection Facility	21	88400 Metre

26426

OFD_O227-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
RETICLE, AS PER DRG.NO.IRDE-1166/12. FOR COLLIMATOR INF. AIMING 102A. Description RETICLE, AS PER DRG.NO.IRDE-1166/12. FOR COLLIMATOR INF. AIMING 102A. Specification RETICLE, AS PER DRG.NO.IRDE-1166/12. FOR COLLIMATOR INF. AIMING 102A. Drawing no. IRDE-1166/12 IRDE1166_12.jpg Manufacturing Technology Testing / Inspection Facility	26	200 Number

26427

OFD_O225-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
RETICLE, DRG.NO.IRDE-1175/69 SHT 1 & SHT 2, FOR SIGHT DIAL 104A. Description RETICLE, DRG.NO.IRDE-1175/69 SHT 1 & SHT 2, FOR SIGHT DIAL 104A. Specification RETICLE, DRG.NO.IRDE-1175/69 SHT 1 & SHT 2, FOR SIGHT DIAL 104A. IRDE1175_69_Sh2.jpg Drawing no. IRDE-1175/69 SHT 1 & SHT 2, . IRDE1175_69_Sh1.jpg Manufacturing Technology Testing / Inspection Facility	26	124 Number

26428

OFD_O104-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
INVESTMENT CASTING TO DRG NO.ODD/C/1000 FOR RING FOOT LARGE DRG NO.ODD/C/1000 Description INVESTMENT CASTING TO DRG NO.ODD/C/1000 FOR RING FOOT LARGE DRG NO.ODD/C/1000 Specification INVESTMENT CASTING TO DRG NO.ODD/C/1000 FOR RING FOOT LARGE DRG NO.ODD/C/1000 Drawing no. ODD/C/1000 ODD_C_1000.jpg Manufacturing Technology Testing / Inspection Facility	74	236 Number

26429

OFD_O065-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
MIRROR MOUNT DRG NO. IRDE-1175/83 Description MIRROR MOUNT DRG NO. IRDE-1175/83 Specification MIRROR MOUNT DRG NO. IRDE-1175/83 Drawing no. IRDE-1175/83 Mirror_Mount_Three_Drawings.pdf Manufacturing Technology Testing / Inspection Facility	74	101 Number

26430

OFD_O064-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
CASE SPRIT BUBBLE TO DRG. NO. IRDE-1076/8 Description CASE SPRIT BUBBLE TO DRG. NO. IRDE-1076/8 Specification CASE SPRIT BUBBLE TO DRG. NO. IRDE-1076/8 Drawing no. IRDE-1076/8 IRDE_1076_8_CASE_SPIRIT_BUBBLE.jpg Manufacturing Technology Testing / Inspection Facility	74	758 Number

26431

OFD_O063-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
COVER PLATE PROTECTIVE, DUST AND MOISTURE CII-140/6 Description COVER PLATE PROTECTIVE, DUST AND MOISTURE CII-140/6 Specification COVER PLATE PROTECTIVE, DUST AND MOISTURE CII-140/6 Drawing no. CII-140/6 CII_140_6_COVER_PLATE_PROTECTIVE.jpg Manufacturing Technology Testing / Inspection Facility	74	380 Number

26432

OFD_O209-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
SET OF PRISM HR BINO NEW Physical Verification needed Description SET OF FINISHED OPTICS CONSISTING OF FOLLOWING:(1) LENS,OPTICAL INSTRUMENT I & II AS PER DRG. NO. IRDE-1035/12, 1/SET. (2) LENS,OPTICAL INSTRUMENT III,IV,V AS PER DRG.NO.IRDE-1035/7, 1/SET. Specification SET OF FINISHED OPTICS CONSISTING OF FOLLOWING:(1) LENS,OPTICAL INSTRUMENT I & II AS PER DRG. NO. IRDE-1035/12, 1/SET. (2) LENS,OPTICAL INSTRUMENT III,IV,V AS PER DRG.NO.IRDE-1035/7, 1/SET. Drawing no. DRG. NO. IRDE-1035/12 DRAWINGS_OF_SET_OF_OPTICS.pdf Manufacturing Technology PRECISION OPTICAL POLISHING DRG_PART_1.pdf DRG_PART_2.pdf DRG_PART_3.pdf DRG_PART_4.pdf DRG_PART_5.pdf DRG_PART_6.pdf Testing / Inspection Facility ASSOCIATED TESTING TO PRECISION OPTICAL POLISHING DRG_PART_1.pdf DRG_PART_2.pdf DRG_PART_3.pdf DRG_PART_4.pdf DRG_PART_5.pdf DRG_PART_6.pdf	26	100 Set

26433

OFD_O190-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
CASE CARRYING CANVAS TO DRG NO. (COMPLETE) MCT-1378 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY) Description CASE CARRYING CANVAS TO DRG NO. (COMPLETE) MCT-1378 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY) Specification CASE CARRYING CANVAS TO DRG NO. (COMPLETE) MCT-1378 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY) Drawing no. MCT-1378 drawing.pdf Manufacturing Technology Testing / Inspection Facility	74	682 Number
CASE CARRYING TO DRG. NO. MCT-1463/1.FOR SIGHT 51MM MORTAR. Description CASE CARRYING TO DRG. NO. MCT-1463/1.FOR SIGHT 51MM MORTAR. Specification CASE CARRYING TO DRG. NO. MCT-1463/1.FOR SIGHT 51MM MORTAR. Drawing no. MCT-1463/1. drawing.pdf Manufacturing Technology Testing / Inspection Facility	00	571 Number

26434

ofd_O144-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
CASE CARRYING FOR CHEEK REST TO DRG NO. (MCT-1406/2) Description CASE CARRYING FOR CHEEK REST TO DRG NO. (MCT-1406/2) Specification CASE CARRYING FOR CHEEK REST TO DRG NO. (MCT-1406/2) Drawing no. MCT-1406/2 MCT-1406-2.jpg Manufacturing Technology Testing / Inspection Facility	74	6042 Number
CASE CARRYING AS PER DRG.NO.CWC-233 FOR PNS 5.56MM RIFLE/LMG Description CASE CARRYING AS PER DRG.NO.CWC-233 FOR PNS 5.56MM RIFLE/LMG Specification CASE CARRYING AS PER DRG.NO.CWC-233 FOR PNS 5.56MM RIFLE/LMG Drawing no. CWC-233 All_Drawings_.pdf Manufacturing Technology Testing / Inspection Facility	74	2666 Number

26435

ofd_O112-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS) Description FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS) Specification FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS) Drawing no. FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS) COMBINED_DRAWINGS_NEW_.pdf Manufacturing Technology Testing / Inspection Facility	74	276 Number
CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-138 Description CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1. Specification CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1. Drawing no. CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-138 COMBINED_DRAWINGS_NEW_.pdf Manufacturing Technology Testing / Inspection Facility	74	857 Number

26436

ofd_O143-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity
SUPPORT TO DRG.NO.MCT-3115 FOR TELESCOPE SIGHT FOR 84MM CARL GUSTAV Description SUPPORT TO DRG.NO.MCT-3115 FOR TELESCOPE SIGHT FOR 84MM CARL GUSTAV Specification SUPPORT TO DRG.NO.MCT-3115 FOR TELESCOPE SIGHT FOR 84MM CARL GUSTAV Drawing no. MCT-3115 Drawings.pdf Manufacturing Technology Testing / Inspection Facility	74	1858 Number
LOCK SCREW AS PER DRG.NO. CQA(I)-793/28 FOR TELE. SIGHT MK-III Description LOCK SCREW AS PER DRG.NO. CQA(I)-793/28 FOR TELE. SIGHT MK-III Specification LOCK SCREW AS PER DRG.NO. CQA(I)-793/28 FOR TELE. SIGHT MK-III Drawing no. 793/28 Drawings.pdf Manufacturing Technology Testing / Inspection Facility	74	3636 Number
LEVER PICATINY DRG.NO.CWC/236/10 Description LEVER PICATINY DRG.NO.CWC/236/10 Specification LEVER PICATINY DRG.NO.CWC/236/10 Drawing no. CWC/236/10 Drawings.pdf Manufacturing Technology Testing / Inspection Facility	74	96 Number
LOCK PICATINNY DRG.NO.CWC/236/9 Description LOCK PICATINNY DRG.NO.CWC/236/9 Specification LOCK PICATINNY DRG.NO.CWC/236/9 Drawing no. CWC/236/9 Drawings.pdf Manufacturing Technology Testing / Inspection Facility	74	43 Number
PLUNGER PICATINNY DRG.NO.CWC-236/6/1 Description PLUNGER PICATINNY DRG.NO.CWC-236/6/1 Specification PLUNGER PICATINNY DRG.NO.CWC-236/6/1 Drawing no. CWC-236/6/1 Drawings.pdf Manufacturing Technology Testing / Inspection Facility	74	96 Number
CASE CARRYING FOR BINO NIGHT VISION PASSIVE TO DRG NO. IRDE-2003 (COMPLET) Description CASE CARRYING FOR BINO NIGHT VISION PASSIVE TO DRG NO. IRDE-2003 (COMPLET) Specification CASE CARRYING FOR BINO NIGHT VISION PASSIVE TO DRG NO. IRDE-2003 (COMPLET) Drawing no. IRDE-2003 COMBINED_DRAWINGS_NEW_.pdf Manufacturing Technology Testing / Inspection Facility	00	1252 Number

26437

adv_ofd_O171-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY) Description CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY) Specification CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY) Drawing no. MCT-1682/1 DRAWING.pdf Manufacturing Technology Testing / Inspection Facility	74	5343 Number

26438

adv_ofd_O105-16

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
INVESTMENT STEEL CASTING TO DRG NO. ODD/C/1001 FOR RING FOOT SMALL TO DRG NO ODD/C/1001 Description INVESTMENT STEEL CASTING TO DRG NO. ODD/C/1001 FOR RING FOOT SMALL TO DRG NO ODD/C/1001 Specification INVESTMENT STEEL CASTING TO DRG NO. ODD/C/1001 FOR RING FOOT SMALL TO DRG NO ODD/C/1001 Drawing no. ODD/C/1001 ODD_C_1001.jpg Manufacturing Technology Testing / Inspection Facility	74	243 Number

26439

Test/demo-1/2017

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Description Specification Drawing no. Manufacturing Technology Testing / Inspection Facility	10	01 Ample

26440

2017000007

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Yarn Wool Polyamide (80:20) 240 Tex Air Force Blue Description As per Requirements & Specifications Specification As per Requirements & Specifications Drawing no. Manufacturing Technology Testing / Inspection Facility	21	16995.00 Kilogram

26441

2017000011

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Machine Strapping Seal various sizes Description As per requirements & specifications Specification As per requirements & specifications Drawing no. Manufacturing Technology Testing / Inspection Facility	21	368926 Number

26442

2017000010

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Polypropylene Strapping zero point five mm Thick and 12 mm wide in white colour Description Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through Strapping Device. Specification No. JSS:8135-10:2004. as per relevant clause of specification. Specification Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through Strapping Device. Specification No. JSS:8135-10:2004. as per relevant clause of specification. Drawing no. Manufacturing Technology as per attached list (Manufacturing Technology Files ) polyproplene_strapping.pdf Testing / Inspection Facility as per attached list (Testing / Inspection Facility Files ) polyproplene_strapping.pdf	21	1612676 Metre

26443

2017000005

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Polyester Satin Piping 7 cm AF Blue Description Polyester Satin Piping 7 cm AF Blue OCFS/BLANKET AF BLUE/POLY PIPING(REV. NO.2) Specification Polyester Satin Piping 7 cm AF Blue OCFS/BLANKET AF BLUE/POLY PIPING(REV. NO.2) Drawing no. Manufacturing Technology as per attached list (Manufacturing Technology Files ) piping_AFB.pdf Testing / Inspection Facility as per attached list (Testing / Inspection Facility Files ) piping_AFB.pdf	21	147625 Metre

26444

2016000365

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Elastic Black 3cm Wide Description Elastic Black 3cm Wide Best trade quality as per provisional specification no.-S/2594/CCD army logo/TC-15(a) Specification Best trade quality as per provisional specification no.-S/2594/CCD army logo/TC-15(a) Drawing no. Manufacturing Technology as per attached list (Manufacturing Technology Files ) Elastic_black_3_cm.pdf Testing / Inspection Facility as per attached list (Testing / Inspection Facility Files ) Elastic_black_3_cm.pdf	21	118262 Metre

26445

2016000348

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Marking Label of Blanket Superior OG Description As per Requirements & Specifications Specification As per Requirements & Specifications Drawing no. Manufacturing Technology Testing / Inspection Facility	21	224113 Number

26446

2016000360

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
PLASTIC ANTIQUE TIP BLACK Description LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS Specification LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS Drawing no. Manufacturing Technology as per attached manufacturing technolgy files Antique_Tip.pdf Testing / Inspection Facility as per attached testing / Inspection facility Files Antique_Tip.pdf	21	989217 Number

26447

2016000355

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Glossy WP Paper with Self Adhesive size 180x70 mm (Manufacturer) Description As per Requirements & Specifications Specification As per Requirements & Specifications Drawing no. Manufacturing Technology Testing / Inspection Facility	21	675098 Number

26448

2016000354

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Eyelet Aluminium Description As per Requirements & Specifications Specification As per Requirements & Specifications Drawing no. Manufacturing Technology Testing / Inspection Facility	21	3350 Hundred

26449

2016000357

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Elastic Cord Black Description ELASTIC CORD BLACK ELASTIC CORD BLACK BEST TRADE QUALITY AS PER PROVISIONAL SPECIFICATION NO. S/2594/CCD ARMY LOGO/TC-15(a) Specification ELASTIC CORD BLACK ELASTIC CORD BLACK BEST TRADE QUALITY AS PER PROVISIONAL SPECIFICATION NO. S/2594/CCD ARMY LOGO/TC-15(a) Drawing no. Manufacturing Technology as per attached list (Manufacturing Technology Files ) Elastic_Cords.pdf Testing / Inspection Facility as per attached list (Testing / Inspection Facility Files ) Elastic_Cords.pdf	21	215798 Metre

26450

2016000356

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
PLASTIC SLIDE FASTENER CE MSD A .LOCK IN VARIOUS SIZES AND COLORS Description IS:14181(Part 1 to3):2002 Specification IS:14181(Part 1 to3):2002 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	VARIOUS Number

26451

2016000341

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
HDPE Dot Printed Fusible Interlining Fabric 90cm Description IND/TC/2089(a) Specification IND/TC/2089(a) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	79247 Metre

26452

2016000351

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Polythene Bags all sizes Description As per Requirements & Specifications Specification As per Requirements & Specifications Drawing no. Manufacturing Technology Testing / Inspection Facility	21	VARIOUS Number

26453

ORDFYS/OFT/DAVP/16-17/MMR/E-PROC/TAR/03

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity
AUTO SEAR TO DRG NO MIM K 2067 00 TAR Description AUTO SEAR TO DRG NO MIM K 2067 00 TAR Specification AUTO SEAR TO DRG NO MIM K 2067 00 TAR Drawing no. TEND 2517 (for K 2067) Drg_Autosear_MIM.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE TESTING.pdf	70	3450 Number
REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5 Description REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5 Specification REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5 Drawing no. TEND :25094 (for K-12025) DRG_TEND_2509_STAR_4_RSB_BLANK.PDF Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE TESTING.pdf	70	1930 Number
FRONT SIGHT BLOCK BLANK S3 L F No 7024012072 Description FRONT SIGHT BLOCK BLANK S3 AS ER DRG No.TEND 2508 (for K 1207) Specification AS ER DRG No.TEND 2508 (for K 1207) Drawing no. TEND 2508 (for K 1207) TEND_2508.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE TESTING.pdf	70	1520 Number

26454

ORDFYS/OFT/DAVP/16-17/MMR/E-PROC/7.62/01

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
SEAR SAFETY ICR 1281 L F 7011606010 Description SEAR SAFETY (ICR-1281) D.S. CAT No.:1005-001697, D.C.No.22816-SA DATED:20.01.1995 (ICR-1281) Specification AS PER DRAWING Drawing no. ICR-1281 sear_safety_drawing.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE TESTING.pdf	70	2409 Number
BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY LF No 7011655072 Physical Verification needed Description BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY to D.S. CAT No.1005-004025, D.C No.26416-SA. dt.09.05.2008 with details of latest issue D.S. CAT No.5305-005010, 5340-016097, 1005-001664, 1005-004026, 1005-004028, 1005-005449, 5305-005009, 1005-004027, TEND 1911 REF. NEW DC Specification As per Drawing Drawing no. D.S. CAT No.1005-004025 64_C_2008_200_G3.pdf Manufacturing Technology As per OFT requirements 64_C_2008_200_G3.pdf Testing / Inspection Facility As per OFT requirements 64_C_2008_200_G3.pdf	70	3720 Number

26455

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
PLATE TO DRG. NO. AK-630 SB 171/50-71 IN FINISHED CONDITION Description PLATE TO DRG. NO. AK-630 SB 171/50-71 IN FINISHED CONDITION Specification PLATE TO DRG. NO. AK-630 SB 171/50-71 IN FINISHED CONDITION Drawing no. Pages_from_DD_for_article_AK-630(1-61)-2.pdf Manufacturing Technology Testing / Inspection Facility	72	15 Number

26456

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
HORIZONTAL PAD AK-630 ASSY 120 Description HORIZONTAL PAD AK-630 ASSY 120 Specification HORIZONTAL PAD AK-630 ASSY 120 Drawing no. 120_HORIZONTAL_BUFFER_-ALBUM.pdf Manufacturing Technology Testing / Inspection Facility	72	15 Number

26457

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
DRUM AK-630 SB ASSY 118SB Description DRUM AK-630 SB ASSY 118SB Specification DRUM AK-630 SB ASSY 118SB Drawing no. AK-630_118_DRUM_-album.pdf Manufacturing Technology Testing / Inspection Facility	72	15 Number

26458

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
PNEUMATIC GROUP AK 630 ASSY 114 Description PNEUMATIC GROUP AK-630 ASSY 114 Specification PNEUMATIC GROUP AK-630 ASSY 114 Drawing no. 114_PNEUMATIC_EQUIPMENT_-album_compressed.pdf Manufacturing Technology AS PER ATTACHMENT PNEUMATIC_PM.pdf Testing / Inspection Facility AS PER ATTACHMENT PNEUMATIC_PM.pdf	72	15 Number

26459

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
IMPACT PROTECTION CONSISTING OF IMPACT PROTECTION LT P No F1303 026871 IMPACT PROTECTION RT P No F1303 026881 STRAP FOR IMPACT PROTECTION P No F1303 028590 DOUBLE SIDE ADHESIVE TAPE F1303 028990A CLEANING SACHETTE F1303 029050 REF F1303 028970 IN FC Description CONSISTING OF IMPACT PROTECTION LEFT TO PART NO: F 1303-026871, IMPACT PROTECTION RIGHT TO PART NO: F 1303-026881 WITH ACCESSORIES , STRAP FOR IMPACT PROTECTION PART NO- F 1303-028590, DOUBLE SIDED ADHESIVE TAPE DRG. NO: F1303-028990A, CLEANING SACHETTE IN FINISHED CONDITION Specification AS PER DRG. & SPECIFICATION Drawing no. F_1303-028970_A_IMPACT_PROTECTOR_PACKED_M3_COMBINED.pdf Manufacturing Technology AS PER ATTACHMENT IP_P_M.pdf Testing / Inspection Facility AS PER ATTACHMENT IP_P_M.pdf	71	900 Number

26460

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
SHOULDER PAD ASSY TO DRG NO F1303 007200 F IN FINISHED CONDITION D C NO 19047 W DT 02 05 07 Description SHOULDER PAD ASSY. TO DRG. NO. F1303-007200 F IN FINISHED CONDITION D.C. NO. 19047-W DT.02.05.07 Specification AS PER DRAWING Drawing no. F_1303-007200_F.pdf Manufacturing Technology AS PER ATTACHMENT PM.pdf Testing / Inspection Facility AS PER ATTACHMENT PM.pdf	71	900 Number

26461

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
FACE PAD TO DRG. NO. F-1303-007190 Description FACE PAD FACE PAD TO DRG. NO. F-1303-007190 Specification FACE PAD TO DRG. NO. F-1303-007190E DOCUMENT NO. 304053433 IN FINISHED CONDITION D.C. NO-19311-W DT..02.03.2013 Drawing no. 304053433_FACE_PAD_F1303-007190.pdf Manufacturing Technology Testing / Inspection Facility	71	900 Number

26462

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
SLIDE IN FC WITHOUT NICKEL PLATING TO DRG NO M 8196C for 0 POINT 32 Pistol Description SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol Specification SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol Drawing no. M-8196C.pdf Manufacturing Technology . Mfg_testing.pdf Testing / Inspection Facility . Mfg_testing.pdf	70	7500 Number

26463

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
MACHINING OF 1 SET OF RACE RING CONSIST OF AK-630 119-1, UPPER RING TO DRG. NO. AK-630 AA Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. race_ring_machining.pdf Manufacturing Technology Testing / Inspection Facility	91	15 Set

26464

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG. NO. NAD 1025/2 ARDE 1818 Description WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG. NO. NAD 1025/2 ARDE 1818 Specification WIRE CUT OPERATION OF 3 PDR BODY BREECH END DRG. NO. NAD 1025/2 ARDE 1818 Drawing no. BODY_BREECH_END_NAD_1025-2.pdf Manufacturing Technology Testing / Inspection Facility	91	30 Number

26465

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
WIRE CUT OPERATION TO MAKE A POCKET IN FIRING PIN FOR RL MK-II AS PER DRG. NO. GF-125089 Description WIRE CUT OPERATION TO MAKE A POCKET IN FIRING PIN FOR RL MK-II AS PER DRG. NO. GF-125089 Specification WIRE CUT OPERATION TO MAKE A POCKET IN FIRING PIN FOR RL MK-II AS PER DRG. NO. GF-125089 Drawing no. GF-125089 GF_125089.pdf Manufacturing Technology Testing / Inspection Facility	91	2500 Number

26466

ORDFYS/GSF/17-18/EOI

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
SURFACE TREATMENT OF CASE SUB ASSEMBLY TO DRG NO M 8208 A PLATFORM TO DRG NO CTM 0023 B Description SURFACE TREATMENT (NICKEL PLATING) OF CASE SUB ASSEMBLY TO DRG. NO CTM-0099 (PB-31 OR M-8208-A & PB-33 OR CTM-0023 B (PB-32) Specification SURFACE TREATMENT (NICKEL PLATING) OF CASE SUB ASSEMBLY TO DRG. NO CTM-0099 (PB-31 OR M-8208-A & PB-33 OR CTM-0023 B (PB-32) Drawing no. merged_files.pdf Manufacturing Technology AS PER ATTACHMENT 1.pdf Testing / Inspection Facility AS PER ATTACHMENT 1.pdf	91	15000 Set

Proceed