25521
MPV 14
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
Name
Code
Quantity
Approx Value
Select
REAR GLASS (ARMY) MPV
Description
REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I)
Specification
REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I)
Drawing no.
645-10-1015(I)
Testing / Inspection Facility
90
250
Number
SIDE GLASS
Description
SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I)
Specification
SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I)
Drawing no.
645-10-1014-(I)
Testing / Inspection Facility
90
250
Number
CO-DRIVER SIDE GLASS
Description
CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I)
Specification
CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I)
Drawing no.
645-10-1013-(I)
Testing / Inspection Facility
90
250
Number
DRIVER SIDE GLASS
Description
DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I)
Specification
DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I)
Drawing no.
645-10-1012-(I)
Testing / Inspection Facility
90
250
Number
WIND SHIELD GLASS (ARMY) MPV
Description
WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING)
Specification
WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING)
Drawing no.
645-10-1011-(I)
Testing / Inspection Facility
90
250
Number
JACKAL ARMOUR PLATE, A-CATEGORY
Description
JACKAL ARMOUR PLATE, A-CATEGORY, SIZE: 4 x 1500 x 6000 MM HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM AK-47 FROM A DISTANCE OF 10 MTRES AS PER BP R&D , SPECIFICATION: 52/01D/97-DD(W)-01(REV).
Specification
JACKAL ARMOUR PLATE, A-CATEGORY, SIZE: 4 x 1500 x 6000 MM HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM AK-47 FROM A DISTANCE OF 10 MTRES AS PER BP R&D , SPECIFICATION: 52/01D/97-DD(W)-01(REV).
Testing / Inspection Facility
90
250
Kilogram
MIDHANI MAKE MDN 45 PLATE
Description
"MIDHANI MAKE" MDN 45'PLATE, SIZE:6MM×1800×6000MM, HIGH HARDNESS TO 477-530 BHN, PHYSICAL PROPOERTIES AS PER SPCN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM 7.62 SLR AT A DISTANCE OF 10 MTRS AS PER BP R&D PECIFICATION: 52/01D/97-DD(W)-01(REV)
Specification
"MIDHANI MAKE" MDN 45'PLATE, SIZE:6MM×1800×6000MM, HIGH HARDNESS TO 477-530 BHN, PHYSICAL PROPOERTIES AS PER SPCN: CQA(M)-47 OR EQUIVALENT FOR PROTECTION AGAINST FIRE FROM 7.62 SLR AT A DISTANCE OF 10 MTRS AS PER BP R&D PECIFICATION: 52/01D/97-DD(W)-01(REV)
Testing / Inspection Facility
90
250
Kilogram
COMPOSITE ARMOUR RHS and LHS
Description
COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/F
Specification
COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/F and SPECIFICATION NO. OFPM/R&D/SP/COMPOSITE - ARMOUR/07 DT. 16.03.2007 Amendment No.: 04 Dt. 02.03.2019
Drawing no.
645-15-1-1 TO 15/F
Testing / Inspection Facility
AS PER SPECIFICATION & QAP
90
250
Set
SPADE M1 HEAT TREATED ARMOUR PLATE 24 MM
Description
PLATE SIZE:24MMX1800X6300MM SPADE M1 HEAT TREATE ARMOUR SPECN:CQA(M)-51 WITH 270-350 BHN,UTS-95KGF/SQMM(MIN) ELONGATION 13%(MIN),IMPACT-60 JOULES AT ROOM TEMPT(MIN)
Specification
PLATE SIZE:24MMX1800X6300MM SPADE M1 HEAT TREATE ARMOUR SPECN:CQA(M)-51 WITH 270-350 BHN,UTS-95KGF/SQMM(MIN) ELONGATION 13%(MIN),IMPACT-60 JOULES AT ROOM TEMPT(MIN)
Testing / Inspection Facility
90
250
Kilogram
SPADE M1 HEAT TREATED ARMOUR PLATE 16 MM
Description
PLATE SIZE:16MM×1800×6300MM PLATE SIZE:16MM×1800×6300MM SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)
Specification
PLATE SIZE:16MM×1800×6300MM PLATE SIZE:16MM×1800×6300MM SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)
Testing / Inspection Facility
90
250
Kilogram
SPADE M1 HEAT TREATED ARMOUR PLATE
Description
PLATE SIZE:12MM×1800×6300MM SPADE M1 HEAT TREATED ARMOUR SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)
Specification
PLATE SIZE:12MM×1800×6300MM SPADE M1 HEAT TREATED ARMOUR SPEN:CQA(M)-51 WITH 270-350 BHN, UTS-95KGF/SQMM(MIN) ELONGATION 16%(MIN), IMPACT-60 JOULES AT ROOM TEMPT(MIN)
Testing / Inspection Facility
90
250
Kilogram
25522
RFI/OTE/ATI0820207/2018
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
LEVER HOLDER FOR 12 BORE PUMP ACTION GUN
Description
LEVER HOLDER FOR 12 BORE PUMP ACTION GUN, RFI DRG. NO. PAG-0012*
Specification
LEVER HOLDER FOR 12 BORE PUMP ACTION GUN, RFI DRG. NO. PAG-0012*
Drawing no.
RFI DRG. NO. PAG-0012*
Testing / Inspection Facility
70
3230
Number
25523
RFI/OTE/ATI0120209/2018
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
INVESTMENT CASTING OF RETAINER SPRING RECOIL MODIFIED FOR RIFLE 5 56 MM INSAS
Description
INVESTMENT CASTING OF RETAINER SPRING RECOIL(MODIFIED)AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S. FOR RIFLE 5.56 MM INSAS.
Specification
INVESTMENT CASTING OF RETAINER SPRING RECOIL(MODIFIED)AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S. FOR RIFLE 5.56 MM INSAS.
Drawing no.
AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S.
Testing / Inspection Facility
79
11130
Number
25524
T E NO 170654BMPO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
DEFLECTION PLATE ASSY TO DRG NO 675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210
Description
DEFLECTION PLATE ASSY TO DRG NO 675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210
Specification
DEFLECTION PLATE ASSY TO DRG NO 675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210
Drawing no.
675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210
Testing / Inspection Facility
90
1095
Number
THINNER FOR SYNTHETIC PAINTS
Description
THINNER FOR SYNTHETIC PAINTS TO SPECN. IS-1872
Specification
THINNER FOR SYNTHETIC PAINTS TO SPECN. IS-1872
Testing / Inspection Facility
90
250
Litre
ACRALKD MATT FINISH QD PAINT
Description
ACRALKD MATT FINISH QD PAINT AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294
Specification
ACRALKD MATT FINISH QD PAINT AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294
Drawing no.
AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294
Testing / Inspection Facility
90
250
Litre
PAINT RFU PRIMING RED OXIDE
Description
PAINT RFU PRIMING REDOXIDE OF IRON & ZINC CHROMATE UNIVERSAL SYNTHETIC BRUSHING/SPRAYING TO SPECIFICATION JSS-3-47-13 CAT.NO.H1 (A)/8010-000110
Specification
PAINT RFU PRIMING REDOXIDE OF IRON & ZINC CHROMATE UNIVERSAL SYNTHETIC BRUSHING/SPRAYING TO SPECIFICATION JSS-3-47-13 CAT.NO.H1 (A)/8010-000110
Drawing no.
SPECIFICATION JSS-3-47-13 CAT.NO.H1 (A)/8010-000110
Testing / Inspection Facility
90
250
Litre
PAINT ENAMEL RFU SYNTHETIC EXTERIOR FINISHING BRUSHING GOLDEN YELLOW
Description
PAINT ENAMEL RFU SYNTHETIC EXTERIOR FINISHING BRUSHING GOLDEN YELLOW I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM
Specification
PAINT ENAMEL RFU SYNTHETIC EXTERIOR FINISHING BRUSHING GOLDEN YELLOW I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM
Drawing no.
I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM
Testing / Inspection Facility
90
250
Litre
Spring Washer B 5 IS 3063
Description
Spring Washer B 5 I.S. 3063
Specification
Spring Washer B 5 I.S. 3063
Testing / Inspection Facility
90
250
Number
Snap Head Rivet 6X30 IS 2155
Description
Snap Head Rivet 6X30 to IS: 2155
Specification
Snap Head Rivet 6X30 to IS: 2155
Testing / Inspection Facility
90
250
Number
SLOTTED CHEESE HEAD SCREW M5 X 15 LENGTH
Description
SLOTTED CHEESE HEAD SCREW M5 X 15 LENGTH DRG. NO. S-1818 FOR ASSY. ERA CONTAINER
Specification
SLOTTED CHEESE HEAD SCREW M5 X 15 LENGTH DRG. NO. S-1818 FOR ASSY. ERA CONTAINER
Drawing no.
DRG. NO. S-1818 FOR ASSY. ERA CONTAINER
Testing / Inspection Facility
90
250
Number
SLOTTED CHEESE HEAD SCREW M5 X 25 LENGTH
Description
SLOTTED CHEESE HEAD SCREW M5 X 25 LENGTH DRG. NO. S-1822 FOR ERA BOX
Specification
SLOTTED CHEESE HEAD SCREW M5 X 25 LENGTH
Drawing no.
DRG. NO. S-1822 FOR ERA BOX
Testing / Inspection Facility
90
250
Number
SLOTTED CHEESE HEAD SCREW M5X35 LENGTH
Description
SLOTTED CHEESE HEAD SCREW M5X35 LENGTH DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)
Specification
SLOTTED CHEESE HEAD SCREW M5X35 LENGTH DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)
Drawing no.
DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)
Testing / Inspection Facility
90
250
Number
FLAT 40 X 25 IN STD LENGT
Description
FLAT 40 X 25 IN STD LENGT & SR 25 IS: 2062/1992
Specification
FLAT 40 X 25 IN STD LENGT & SR 25 IS: 2062/1992
Drawing no.
IS: 2062/1992
Testing / Inspection Facility
90
250
Kilogram
CR SHEET
Description
CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK
Specification
CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK
Testing / Inspection Facility
90
250
Kilogram
HIGH STRENGTH STEEL SHEET
Description
5.3mm +-0.3 HIGH STRENGTH STEEL SHEET TO DMRL-1750 HYDERABAD (SPCN. NO. CQA (M)-54-1997 UPDATED ON 06-02-2002)
Specification
5.3mm +-0.3 HIGH STRENGTH STEEL SHEET TO DMRL-1750 HYDERABAD (SPCN. NO. CQA (M)-54-1997 UPDATED ON 06-02-2002)
Drawing no.
SPCN. NO. CQA (M)-54-1997 UPDATED ON 06-02-2002
Testing / Inspection Facility
90
250
Kilogram
STRETCHER (MEDICAL PURPOSE)
Description
STRETCHER (MEDICAL PURPOSE) SPECN. NO. OFPM/R&D/SP/MPV/ STRETCHER MEDICAL PURPOSE FOR MPV/015
Specification
STRETCHER (MEDICAL PURPOSE) SPECN. NO. OFPM/R&D/SP/MPV/ STRETCHER MEDICAL PURPOSE FOR MPV/015
Testing / Inspection Facility
90
250
Number
FRP. DASH BOARD (ARMY VERSION)
Description
FRP. DASH BOARD (ARMY VERSION) DRG. NO. 645-01-3321-1/A
Specification
FRP. DASH BOARD (ARMY VERSION) DRG. NO. 645-01-3321-1/A
Drawing no.
645-01-3321-1/A
Testing / Inspection Facility
90
250
Number
25525
110180168
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
INERTIA PROOF QUICK RELEASE FITTING 4 POINT WITH CONNECTING LUG LARGE AND SMALL
Description
QUANTITY = 01. DRAWING NO. ADRDE/209(b)
QUANTITY = 02. DRAWING NO. ADRDE/1305(a)
QUANTITY = 02. DRAWING NO. ADRDE/1365(c)
Specification
QUANTITY = 01. DRAWING NO. ADRDE/209(b)
QUANTITY = 02. DRAWING NO. ADRDE/1305(a)
QUANTITY = 02. DRAWING NO. ADRDE/1365(c)
Testing / Inspection Facility
9911036174
36
Set
25526
170420L7FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
CHAIN TO DRG NO 4027314
Description
CHAIN TO DRG NO. 4027314
Specification
CHAIN TO DRG NO. 4027314
Drawing no.
DRG NO 4027314
Testing / Inspection Facility
90
312
Number
FRP DASH BOARD (MHA VERSION)
Description
FRP DASH BOARD (MHA VERSION) DRG NO: OFPM-640-01-3321-1/A
Specification
FRP DASH BOARD (MHA VERSION) DRG NO: OFPM-640-01-3321-1/A
Drawing no.
DRG NO: OFPM-640-01-3321-1/A
Testing / Inspection Facility
90
250
Number
SPECIAL WASHER
Description
SPECIAL WASHER2-3/4"ODX21/32"IDX5/16"THICK DRG./PART NO.F-4934715 HA IPL NO. 105/7
Specification
SPECIAL WASHER2-3/4"ODX21/32"IDX5/16"THICK DRG./PART NO.F-4934715 HA IPL NO. 105/7
Drawing no.
DRG./PART NO.F-4934715 HA IPL NO. 105/7
Testing / Inspection Facility
90
250
Number
TEE PIECE M18 X M18 X M22
Description
TEE PIECE M18 X M18 X M22 PART NO. F 1332111-A
Specification
TEE PIECE M18 X M18 X M22 PART NO. F 1332111-A
Drawing no.
PART NO. F 1332111-A
Testing / Inspection Facility
90
250
Number
ELECTRICAL BOSSES FOR MPV ARMY 13 TYPES
Description
ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES)
Specification
ELECTRICAL BOSSES FOR MPV(ARMY)(13 TYPES)
Testing / Inspection Facility
90
250
Set
EXHAUST PIPE FOR MPV (ARMY)
Description
EXHAUST PIPE FOR MPV (ARMY) DRG. NO. - 115-01-0006-1(A)
Specification
EXHAUST PIPE FOR MPV (ARMY) DRG. NO. - 115-01-0006-1(A)
Drawing no.
115-01-0006-1(A)
Testing / Inspection Facility
90
250
Set
ADAPTOR PART NO X 0100230 C
Description
ADAPTOR PART NO. X 0100230 C
Specification
ADAPTOR PART NO. X 0100230 C
Drawing no.
PART NO. X 0100230 C
Testing / Inspection Facility
90
250
Number
GUARD ASSY FOR RR LIGHT
Description
GUARD ASSY (FOR RR LIGHT) DRG.NO. OFPM 610-06-2011-1/D
Specification
GUARD ASSY (FOR RR LIGHT) DRG.NO. OFPM 610-06-2011-1/D
Drawing no.
DRG.NO.OFPM610-06-2011-1/D
Testing / Inspection Facility
90
250
Number
SPRING WASHER M 4
Description
SPRING WASHER M-4 IS:3063 GALVD & YELLOW PASSIVATED DRG./PART NO.L-4110400
Specification
SPRING WASHER M-4 IS:3063 GALVD & YELLOW PASSIVATED DRG./PART NO.L-4110400
Drawing no.
DRG./PART NO.L-4110400
Testing / Inspection Facility
90
250
Number
25527
3183000492
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Lever Extractor for Revolver . 32' Through MIM process
Testing / Inspection Facility
70
9088
Number
ADAPTOR NON RET VALVE
Description
ADAPTOR NON RET. VALVE PART NO. F0130145 B
Specification
ADAPTOR NON RET. VALVE PART NO. F0130145 B
Drawing no.
PART NO. F0130145 B
Testing / Inspection Facility
90
250
Number
SUPPORT PLATE STG SYSTEM
Description
SUPPORT PLATE (STG.SYSTEM) DRG.NO.620-04-1130-1/A
Specification
SUPPORT PLATE (STG.SYSTEM) DRG.NO.620-04-1130-1/A
Drawing no.
DRG.NO.620-04-1130-1/A
Testing / Inspection Facility
90
250
Number
25528
OFMK/COMP/H 416518
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
Name
Code
Quantity
Approx Value
Select
INFLATABLE AIR SPLINT FOR LEG
Description
INFLATABLE AIR SPLINT FOR LEG ANKLE + 2
Specification
AS PER TENDER DOCUMENT
Testing / Inspection Facility
40
102
Number
25529
OFMK/COMP/V413118
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
Name
Code
Quantity
Approx Value
Select
HEAD IMMOBILIZER MAKE ME BER s r 1 via LANGHIRANO 270 43100 FONTANINI PARAMA ITALI MODEL ART 625 XEROS ADJUSTABLE UNIVERSAL HEAD IMMOBILIZER
Description
HEAD IMMOBILIZER MAKE ME BER s r 1 via LANGHIRANO 270 43100 FONTANINI PARAMA ITALI MODEL ART 625 XEROS ADJUSTABLE UNIVERSAL HEAD IMMOBILIZER
Specification
AS PER TENDER MAKE AND MODEL
Testing / Inspection Facility
40
16
Number
RELAY CABLE FLANGE HEATER
Description
RELAY CABLE FLANGE HEATER.PART NO.F8155800-B.
Specification
RELAY CABLE FLANGE HEATER.PART NO.F8155800-B.
Drawing no.
PART NO.F8155800-B.
Testing / Inspection Facility
90
250
Number
SELF ADHESIVE PVC INSULATION TAPE BLACK
Description
SELF ADHESIVE PVC INSULATION TAPE BLACK 1.9 CM X 10 MTR. X 0.125 MM ROLL OF 10 METER EACH
Specification
SELF ADHESIVE PVC INSULATION TAPE BLACK 1.9 CM X 10 MTR. X 0.125 MM ROLL OF 10 METER EACH
Testing / Inspection Facility
90
250
Metre
TOW HOOK LAMP REVERSE LIGHT
Description
TOW HOOK LAMP/REVERSE LIGHT PT.NO. F 2341100 B
Specification
TOW HOOK LAMP/REVERSE LIGHT PT.NO. F 2341100 B
Drawing no.
PT.NO. F 2341100 B ('A' &'B' Specified in the drawing.
Testing / Inspection Facility
90
250
Number
BOSS M12 X 25L
Description
BOSS M12 X 25L ,DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B
Specification
BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B
Drawing no.
DRG.NO. OFPM 640-01-1050/B PART.NO.640-01-1050-B
Testing / Inspection Facility
90
250
Number
SEAT BACK REST
Description
SEAT BACK REST DRG. NO. OFPM 640-08-1302/D
Specification
SEAT BACK REST DRG. NO. OFPM 640-08-1302/D
Drawing no.
OFPM 640-08-1302/D
Testing / Inspection Facility
90
250
Number
TROOPER SEAT
Description
TROOPER SEAT DRG. NO. OFPM 640-08-1301/B
Specification
TROOPER SEAT DRG. NO. OFPM 640-08-1301/B
Drawing no.
OFPM 640-08-1301/B
Testing / Inspection Facility
90
250
Number
MESHED COVER FT LIGHT MTG
Description
MESHED COVER (FT.LIGHT MTG.) DRG.NO. 610-06-2017-1/B
Specification
MESHED COVER (FT.LIGHT MTG.) DRG.NO. 610-06-2017-1/B
Drawing no.
DRG.NO.610-06-2017-1/B
Testing / Inspection Facility
90
250
Number
HEX HEAD SCREW M8X30
Description
HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9
Specification
HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9
Testing / Inspection Facility
90
250
Number
HEX HEAD SCREW M12X50
Description
HEX HEAD SCREW M12X50 IS:1364 (PART-2)-8.8
Specification
HEX HEAD SCREW M12X50 IS:1364 (PART-2)-8.8
Testing / Inspection Facility
90
250
Number
HEX HEADED SCREW M12X1.75X30MM
Description
HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.
Specification
HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.
Testing / Inspection Facility
90
250
Number
HEX HEADED SCREW M12X25MM
Description
HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.
Specification
HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.
Testing / Inspection Facility
90
250
Number
PUNNCHED WASHER A13
Description
PUNCHED WASHER A13 TO TYPE A (14X24X2.5) IS:2016-STEEL -CD PLATED
Specification
PUNCHED WASHER A13 TO TYPE A (14X24X2.5) IS:2016-STEEL -CD PLATED
Testing / Inspection Facility
90
250
Number
SPRING WASHER A12
Description
SPRING WASHER A12 IS:3063 CD PLATED
Specification
SPRING WASHER A12 IS:3063-CD PLATED
Testing / Inspection Facility
90
250
Number
PUNCHED WASHER TYPE B
Description
PUNCHED WASHER TYPE B (6.6 X 11X 1.6) IS: 2016 STEEL CD PLATED
Specification
PUNCHED WASHER TYPE B (6.6 X 11X 1.6) IS: 2016 STEEL CD PLATED
Testing / Inspection Facility
90
250
Number
PUNCHED WASHER A11
Description
PUNCHED WASHER A11 TYPE A (11X21X2) IS:2016-STEEL-CD PLATED
Specification
PUNCHED WASHER A11 TYPE A (11X21X2) IS:2016-STEEL-CD PLATED
Testing / Inspection Facility
90
250
Number
PUNCHED WASHER A9 TYPE A
Description
PUNCHED WASHER A9 TYPE A(9X17X1.6) TO IS:2016 - STEEL-CD PLATED
Specification
PUNCHED WASHER A9 TYPE A(9X17X1.6) TO IS:2016 - STEEL-CD PLATED
Testing / Inspection Facility
90
250
Number
HOOK STEPNEY MNTG
Description
HOOK (STEPNEY MNTG) DRG.NO.640-01-5082-1
Specification
HOOK (STEPNEY MNTG) DRG.NO.640-01-5082-1
Drawing no.
DRG.NO.640-01-5082-1
Testing / Inspection Facility
90
250
Number
THREADED BOSS M10X18MMX18MM
Description
THREADED BOSS M10 X 18MM (OD) X18MM LENGTH FULL THREADED MATERIAL :IS:9550 GR-2, 20C8
Specification
THREADED BOSS M10 X 18MM (OD) X18MM LENGTH FULL THREADED MATERIAL :IS:9550 GR-2, 20C8
Testing / Inspection Facility
90
250
Number
PULLEY SWC VTS
Description
PULLEY-SWC (VTS) DRG./PART NO. X-1501515 SAHE
Specification
PULLEY-SWC (VTS) DRG./PART NO. X-1501515 SAHE
Drawing no.
DRG./PART NO. X-1501515 SAHE
Testing / Inspection Facility
90
250
Number
THREADED BOSS
Description
THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8
Specification
THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8
Testing / Inspection Facility
90
250
Number
BOSS M12x22x25 OST 3 1496 72
Description
BOSS M12x22x25 OST 3-1496-72
Specification
BOSS M12x22x25 OST 3-1496-72
Testing / Inspection Facility
90
250
Number
BOSS M8X16X8 OST 3 1496 72
Description
BOSS M8X16X8 OST 3-1496-72
Specification
BOSS M8X16X8 OST 3-1496-72
Testing / Inspection Facility
90
250
Number
25530
MPF/OTE/18TE210378
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
SUCTION PUMP ASSY TO DRG NO 172 46 002 SB1 REQ IGB T90 T72 OH VARIANTS
Description
SUCTION PUMP ASSY TO DRG NO 172 46 002 SB1 REQ IGB T90 T72 OH VARIANTS
Specification
SUCTION PUMP ASSY TO DRG NO 172 46 002 SB1 REQ IGB T90 T72 OH VARIANTS
Drawing no.
172-46-002-SB-1
Testing / Inspection Facility
71
25
Number
HEX HEADED BOLT M 12 X 1.75 X 50 MM
Description
HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
Specification
HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
Testing / Inspection Facility
90
250
Number
BOSS M6X12X36 OST 3 1496 72
Description
BOSS M6X12X36 OST 3-1496-72
Specification
BOSS M6X12X36 OST 3-1496-72
Testing / Inspection Facility
90
250
Number
BOSS M6X12X30 OST 3
Description
BOSS M6X12X30 OST 3-1496-72
Specification
BOSS M6X12X30 OST 3-1496-72
Testing / Inspection Facility
90
250
Number
COLLAR TYPE HEX HEAD BOLT
Description
COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9
Specification
COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9
Testing / Inspection Facility
90
250
Number
HEX HD NUT
Description
HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED
Specification
HEX HD NUT M20 IS:1363 GR-8 GALV. & YELLOW PASSIVATED
Drawing no.
IS:1363 GR-8 GALV. & YELLOW PASSIVATED
Testing / Inspection Facility
90
250
Number
HEX HEADED BOLT 1/2
Description
HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT
Specification
HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT
Testing / Inspection Facility
90
250
Number
HEX HEAD NUT M12 TO IS1364
Description
HEX HEAD NUT M12 TO IS:1364 (PART-3)-8-BL
Specification
HEX HEAD NUT M12 TO IS:1364 (PART-3)-8-BL
Testing / Inspection Facility
90
250
Number
HEX NUT M8 IS 1364
Description
HEX NUT M8-IS:1364(PART-3)-8
Specification
HEX NUT M8-IS:1364(PART-3)-8
Testing / Inspection Facility
90
250
Number
SELF LOCK NUTS
Description
SELF LOCK NUTS M12X1.75 HIGH TENSILE (TVS MAKE) IS:1364
Specification
SELF LOCK NUTS M12X1.75 HIGH TENSILE (TVS MAKE) IS:1364
Testing / Inspection Facility
90
250
Number
SUN LOCK NUT TVS MAKE
Description
SUN LOCK NUT M10X1.5 (TVS MAKE) IS:1364
Specification
SUN LOCK NUT M10X1.5 (TVS MAKE) IS:1364
Testing / Inspection Facility
90
250
Number
HEX NUT M10 TO IS 1364
Description
HEX NUT M10 TO IS:1364 (PART-III)-8
Specification
HEX NUT M10 TO IS:1364 (PART-III)-8
Testing / Inspection Facility
90
250
Number
HEX NUT M16 X 2 IS1364
Description
HEX NUT M16 X 2 IS:1364-(PART-3)-8
Specification
HEX NUT M16 X 2 IS:1364-(PART-3)-8
Testing / Inspection Facility
90
250
Number
25531
OLF/MM-2/T-1806010133
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008