UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL

AS PER DRG No.K-2050 WITH FIRMS MATERIAL

K 2050

REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5

REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5

TEND :2509*4 (for K-1202*5)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR

LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR

MIM-K-1204-01 (TAR)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG NO.K-4011 WITH FIRMS MATERIAL.

AS PER DRG NO.K-4011 WITH FIRMS MATERIAL.

K 4011

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FABRIC NYLON 230 GMS UD 92 CMS

ADRDE/SPECN/1985/29(a)

• As per Specification/Drawing

• As per Specification/Drawing

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

BUFF VT INSOLE FOR BOOT DVS SIZE 11 L

AS PER REQUIREMENT

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

BUFF VT FOR BOOT DVS SIZE 6L

AS PER REQUIREMENT

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

BUFF VEGETABLE TANNED INSOLE FOR BOOT DVS SIZE - 8M

1.THE PARTICIPATING FIRM SHOULD BE A MANUFACTURER OF SUBJECT

TAPE NYLON THICK 51 MM BLACK.

DMSRDE/T7GS/92/403

v

DMSRDE/T&GS/92/403

PLUG LIFTING TO DRG. NO. 2439A00018 D.C.(I) NO. 36552-A DT. 24.4.99

PLUG LIFTING TO DRG. NO. 2439A00018 D.C.(I) NO. 36552-A DT. 24.4.99

DRG. NO. 2439A00018 D.C.(I) NO. 36552-A DT. 24.4.99

FABRIC NYLON POLYURETHENE COATED 105 GM WHITE WIDTH 100 CM ( DS Cat No. 8305-003 728 )

SPECN NO.: JSS:8305-32:2003

• AS PER SPECIFICATION

• AS PER SPECIFICATION

37 X 0.5 Sq mm, Annealed Tinned Copper, Halogen Free Polyolefin + LFH Dual Layer EBXL Insulated, Cores Laid up, collectively screened & FR LSZH EBXL Polyolefin Sheathed Flexible Cable Conforming to EED 50-12, Part No. N6145-021167

37 X 0.5 Sq mm, Annealed Tinned Copper, Halogen Free Polyolefin + LFH Dual Layer EBXL Insulated, Cores Laid up, collectively screened & FR LSZH EBXL Polyolefin Sheathed Flexible Cable Conforming to EED 50-12, Part No. N6145-021167

Cable 12 pair X 0.75 Sq.mm (24 core), ATC Conductor, Conductor Insulation IN Dual Layer, Pairs Laid UP Collectively Screened with ATC wire, PTP Taped & OVER ALL Sheathed, Material Confirming to EED 50-12 (Rev-01), Maximum Outer DIA-16 MM, Reference Table 22 part No.6145020983

Cable 12 pair X 0.75 Sq.mm (24 core), ATC Conductor, Conductor Insulation IN Dual Layer, Pairs Laid UP Collectively Screened with ATC wire, PTP Taped & OVER ALL Sheathed, Material Confirming to EED 50-12 (Rev-01), Maximum Outer DIA-16 MM, Reference Table 22 part No.6145020983

TORSION BAR FORGING TO DRG. NO. 765-33-42

TORSION BAR FORGING TO DRG. NO. 765-33-42 WITH PRE MACHINED (DULY TURNED) UP OPRN NO: 20 AS PER SKETCH

765-33-42

SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR

AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL

K 3001 STR 4

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IC PISTOL GRIP BASE AS PER DRG NO K-IC-1106

AS PER DRG NO K-IC-1106

K IC 1106

IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007

IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007

K 4007

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR

CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR

MIM - K-4004-02 (TAR)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FRONT SIGHT BLOCK BLANK S3 AS ER DRG No.TEND 2508 (for K 1207)

AS ER DRG No.TEND 2508 (for K 1207)

TEND 2508 (for K 1207)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

AUTO SEAR TO DRG NO MIM K 2067 00 TAR

AUTO SEAR TO DRG NO MIM K 2067 00 TAR

TEND 2517 (for K 2067)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CONVERSION OF BOLT BREECH FROM FORGING TO DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle

29P 0013*(M)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

INVESTMENT CASTING TO TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)

AS PER TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)

TEND DRG. No.2310

GUARD TRIGGER INVESTMENT CASTING TO DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle

AS PER DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle

RFI.SK-4312*12

BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle

AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle

TEND 1818*(MODIFIED)

CARD BOARD PACKING CASE AS PER TEND DRG 1834* TO HOLD SINGLE RIFLE .(REQD FOR 0.315 SPORTING RIFLE).

AS PER TEND DRG 1834* TO HOLD SINGLE RIFLE .(REQD FOR 0.315 SPORTING RIFLE).

TEND 1834*

PACKING BOX-CPP HOLLOW CORRUGATED BOX (CAPACITY 5 RIFLES) TO DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

AS PER DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

RFI SK 6431*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PACKING BOX-CPP HOLLOW CORRUGATED BOX (CAPACITY 10 RIFLES)TO DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle

AS PER DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle

RFI.SK.6430*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN STOP BOLT LOCKING TO DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle

DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle

29P 0048*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW PLATE BUTT TO DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

29P 0059*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle

29P 0006

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CAP SLING TO DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

AS PER DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

29P 0044*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW BAND INNER TO DRG. NO.29P 0051* required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0051* required for 0.315" Sporting Rifle

.29P 0051*

SPRING MAIN TO DRG. No.: 29P 0015 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0015 required for 0.315" Sporting Rifle

29P 0015

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING LEAF BED BACK SIGHT TO DRG. NO.29P 0008 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0008 required for 0.315" Sporting Rifle

29P 0008

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

TRIGGER TO DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle

29P 0040*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW SPRING BAND BACK SIGHT TO DRG.NO.29P 0009 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0009 required for 0.315" Sporting Rifle

29P 0009

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING SCREW BAND INNER TO DRG NO.29P 0061* required for 0.315" Sporting Rifle

AS PER DRG NO.29P 0061* required for 0.315" Sporting Rifle

29P 0061*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SWIVEL SLING REAR TO DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle

29P 0065*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW SEAR TO DRG. NO 29P 0058 required for 0.315" Sporting Rifle

AS PER DRG. NO 29P 0058 required for 0.315" Sporting Rifle

29P 0058

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN TRIGGER TO DRG NO.: 29P 0041* required for 0.315" Sporting Rifle

AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle

29P 0041*

• AS PER DRAAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW STRIKER TO DRG. No.: 29P 0017 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0017 required for 0.315" Sporting Rifle

29P 0017

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SWIVEL SLING FRONT 29P 0070* required for 0.315" Sporting Rifle

AS PER DRG No.29P 0070* required for 0.315" Sporting Rifle

.29P 0070*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BAND FORE SIGHT TO DRG. NO.29 P 0002* required for 0.315" Sporting Rifle

AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle

29 P 0002*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW GUARD TRIGGER FRONT TO DRG. NO.29P 0056 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0056 required for 0.315" Sporting Rifle

29P 0056

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW GUARD TRIGGER BACK TO DRG. NO.29P 0055 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0055 required for 0.315" Sporting Rifle

.29P 0055

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BAND FORE SIGHT TO DRG. NO.29 P 0002* required for 0.315" Sporting Rifle

AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle

29 P 0002*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WASHER SPRING BAND INNER TO DRG.NO.: 29P 0067* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0067* required for 0.315" Sporting Rifle

29P 0067*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COLLER TO DRG. No.: 29P 0035 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0035 required for 0.315" Sporting Rifle

29P 0035

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN CATCH MAGAZINE TO DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle

29P 0047*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOLT STOCK WITH WASHERS AS ONE SET CONSISTING:- BOLT STOCK TO DRG.NO.29P 0043*(SP-43 )=10 NOS WASHER BOLT STOCK TO DRG.NO.29P 0066(SP-66)=11 NOS WASHER SPRING BOLT STOCK TO DRG.NO.29P 0069(SP-69)=11 NOS required for 0.315" Sporting Rifle

AS PER DRG

29P 0043*, 29P 0066, 29P 0069

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW EXTRACTOR 29P 0021* required for 0.315" Sporting Rifle

AS PER Drg. No. 29P 0021* required for 0.315" Sporting Rifle

29P 0021*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BED BACKSIGHT ASSEMBLY CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315" Sporting Rifle

AS PER DRG CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315" Sporting Rifle

29P 0007, 29P 0010, 29P 0011

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

HEAD BREECH BOLT TO DRG. NO.TEND.2045 required for 0.315" Sporting Rifle

AS PER DRG. NO.TEND.2045 required for 0.315" Sporting Rifle

TEND 2045

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COMPLETE MAGAZINE ASSEMBLY TO DRG. NO.29 P 0411* CONSISTING OF CASE MAGAZINE SUB-ASSEMBLY 29 P 0460 SPRING PLOTFORM & RETAINER SUB-ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0.315" Sporting Rifle

AS PER DRG

29P 0028, 29P 0411*, 29P 0460, 29P 0440

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle

29P 0020*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING EXTRACTOR TO DRG.No.: 29P 0019* required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0019* required for 0.315" Sporting Rifle

29P 0019*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CATCH SAFETY TO DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle

29P 0046*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW CAP SLING FRONT TO DRG. NO: 29P 0053*3 required for 0.315" Sporting Rifle

AS PER DRG. NO: 29P 0053*3 required for 0.315" Sporting Rifle

29P 0053*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW CAP SLING REAR TO DRG.NO.29P 0054*3 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0054*3 required for 0.315" Sporting Rifle

29P 0054*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOLT LOCKING TO DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle

29P 0042*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW EJECTOR TO DRG. NO.29P 0052 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0052 required for 0.315" Sporting Rifle

29P 0052

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SEAR TO DRG NO.29P 0060*2 required for 0.315" Sporting Rifle

AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle

29P 0060*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING BOLT LOCKING TO DRG.NO.29P 0062* required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0062* required for 0.315" Sporting Rifle

29P 0062*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WASHER SPRING BOLT LOCKING TO DRG.NO. 29P 0068* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0068* required for 0.315" Sporting Rifle

29P 0068*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Stock Fore End to Drawing No 29P 0033STR3 Required for 0POINT315 sporting Rifle

Stock Fore End to Drawing No 29P 0033STR3 Required for 0POINT315 sporting Rifle

29P 0033STR3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOLT LOCKING TO DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle

29P 0042*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

STOCK BUTT TO DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29 P 0038*2 required for 0.315" Sporting Rifle

29 P 0038*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING BOLT LOCKING TO DRG.NO.29P 0062* required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0062* required for 0.315" Sporting Rifle

29P 0062*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW SPRING BOLT LOCKING TO DRG.NO : 29P 0057*2 required for 0.315" Sporting Rifle

DRG.NO : 29P 0057*2 required for 0.315" Sporting Rifle

29P 0057*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PROTECTOR TO DRG.NO. 29P 0050* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0050* required for 0.315" Sporting Rifle

29P 0050*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle

29P 0016*2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PAD SLING TO DRG.NO.29P 0037 required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0037 required for 0.315" Sporting Rifle

29P 0037

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CATCH MAGAZINE TO DRG.NO: 29P 0045* required for 0.315" Sporting Rifle

AS PER DRG.NO: 29P 0045* required for 0.315" Sporting Rifle

29P 0045*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE