CONVERSION OF ALUMINIUM ALLOY 33.5 +/- 0.3 MM DIA TO SPECN. RDE – 40 IN WP CONDITION IN RUNNING LENGTH OF 2 TO 3 MTRS INTO SEMI-FINISHED CONTAINER CARTRIDGE TO OFAJ DRG. NO. FS-2956 D.
Specification
CONVERSION OF ALUMINIUM ALLOY 33.5 +/- 0.3 MM DIA TO SPECN. RDE – 40 IN WP CONDITION IN RUNNING LENGTH OF 2 TO 3 MTRS INTO SEMI-FINISHED CONTAINER CARTRIDGE TO OFAJ DRG. NO. FS-2956 D.
Drawing no.
FS-2956 D
Manufacturing Technology
AS PER PQ
Testing / Inspection Facility
AS PER QMI
00
AS PER REQUIREMENT
Whole job
1283
O113-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
GUANIDINE NITRATE TO SPECN.JSS 6810-95:2018 (REV.NO 04)DC NO -6135- ME DT 10-05-2021.
Specification
GUANIDINE NITRATE TO SPECN.JSS 6810-95:2018 (REV.NO 04)DC NO -6135- ME DT 10-05-2021.
Drawing no.
Manufacturing Technology
Guanidine Nitrate is manufactured by heating Dicyandiamide confirming to IND/ME/878(Prov) with two equitant of Ammonium Nitrate confirming to IND/ME/86 degree C at 160 degree C.
Inspecti0on facility : Guanidine Nitrate and the packages in which it is packed shall be subject to inspection by and to the approval of the Quality Assurance Officer/Quality Assurance Authority
Testing facility/requirements : Samples taken from any portion of batch/lot/consignment of material shall confirm to the following test requirements
Sl no. Characteristics Passing standard
1. Physical form Crystalline
2. Bulk Density, g/ml Min. 0.70
Max. 0.90
3. Melting point, oC Min. 210
Max. 214
4 Water soluble at
30 oC, % by mass Min. 15.10
5. Guanidine Nitrate
, % by mass Min. 99
6. Ammonium Nitrate,
% by mass Max. 0.48
7. Urea Nil
8. Residue on ignition
, % by mass Max. 0.02
9. Moisture content
, % by mass Max. 0.48
10. Matter insoluble in
water at 20 oC, %
by mass Max . 0.50
11. Malamine, % by
mass Max 0.10
12. pH of water extract Min. 5
Max. 6
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification
Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
Specification
Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
Drawing no.
Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
ADRDE/QMS/TDTM/F/2012/02 DATED 19 JAN 2012 and
(i) The fabric shall have an initial spray rating of 80, 80, 70 minimum when tested as per AATCC 22 or equivalent test method.
(ii) The manufacturer shall submit a certificate of compliance for each shipment indicating that fluorocarbon finish has been used.
0321150115 STAINLESS STEEL TUBE TO SIZE OUTER DIA 115.00 (+) (-) 1.00 MM X INNER DIA 90.00 (+) (-) 1.00 MM X 510.00 (+)2.00 MM LONG TO SPECN: AISI-316.OR, AISI-304
Specification
0321150115 STAINLESS STEEL TUBE TO SIZE OUTER DIA 115.00 (+) (-) 1.00 MM X INNER DIA 90.00 (+) (-) 1.00 MM X 510.00 (+)2.00 MM LONG TO SPECN: AISI-316.OR, AISI-304
0321150125 STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.
Specification
0321150125 STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.