Name
Code
Quantity
Approx Value
Select
Steel Blank of Cylinder Gas
Physical Verification needed
Description
Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
Specification
Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
01
323
Number
AUXILLARY GEAR TO 3906113242
Physical Verification needed
Description
AUXILLARY GEAR TO DRG. NO. 176.23.005-B/F
Specification
GOST 4543-71
Drawing no.
176.23.005-B/F
Testing / Inspection Facility
39
534
Number
CROWN GEAR TO 3901040053
Physical Verification needed
Specification
GOST 4543-71
Testing / Inspection Facility
39
888
Number
SUN GEAR II PLANETARY GEAR SET LF 3901040039
Physical Verification needed
Description
SUN GEAR II PLANETARY GEAR SET TO DRG. NO. 172.40.305/F
Specification
GOST 4543 71
Testing / Inspection Facility
39
741
Number
7102001006 NUT 520 02 001 06
Physical Verification needed
Description
7102001006 NUT 520 02 001 06
Specification
NUT 520 02 001 06
Drawing no.
NUT 520 02 001 06
Testing / Inspection Facility
71
7858
Number
7101004001 BOLT 520 01 004 01
Physical Verification needed
Description
7101004001 BOLT 520 01 004 01
Specification
BOLT 520 01 004 01
Drawing no.
BOLT 520 01 004 01
Testing / Inspection Facility
71
282
Number
HOUSING ASSY FOR LMG
Physical Verification needed
Description
HOUSING ASSY, DS CAT NO-1005-008001 (SAPRE ISSUE) FOR MONOPOD ASSY LMG 5.56MM
Specification
HOUSING ASSY, DS CAT NO-1005-008001 (SAPRE ISSUE) FOR MONOPOD ASSY LMG 5.56MM
Testing / Inspection Facility
70
988
Number
7008812045 BOLT 3M12X45 88 38XC 016 GOST 7808 70
Physical Verification needed
Description
7008812045 BOLT 3M12X45 88 38XC 016 GOST 7808 70
Specification
BOLT 3M12X45 88 38XC 016 GOST 7808 70
Drawing no.
BOLT 3M12X45 88 38XC 016 GOST 7808 70
Testing / Inspection Facility
70
186
Number
7008808016 BOLT GOST 7808 3M8X16 88 GOST 7808 70
Physical Verification needed
Description
7008808016 BOLT GOST 7808 3M8X16 88 GOST 7808 70
Specification
BOLT GOST 7808 3M8X16 88 GOST 7808 70
Drawing no.
BOLT GOST 7808 3M8X16 88 GOST 7808 70
Testing / Inspection Facility
70
3518
Number
7007408018 BOLTM8X1 6GX18 66 016 GOST 7808 70
Physical Verification needed
Description
7007408018 BOLTM8X1 6GX18 66 016 GOST 7808 70
Specification
BOLTM8X1 6GX18 66 016 GOST 7808 70
Drawing no.
BOLTM8X1 6GX18 66 016 GOST 7808 70
Testing / Inspection Facility
70
1164
Number
7005506010 BOLT M6 6G 10 66 016 GOST 7805 70
Physical Verification needed
Description
7005506010 BOLT M6 6G 10 66 016 GOST 7805 70
Specification
BOLT M6 6G 10 66 016 GOST 7805 70
Testing / Inspection Facility
70
13542
Number
7005206025 BOLT GOST 7798 3M6X25 88 GOST 7798 70
Physical Verification needed
Description
7005206025 BOLT GOST 7798 3M6X25 88 GOST 7798 70
Specification
BOLT GOST 7798 3M6X25 88 GOST 7798 70
Drawing no.
BOLT GOST 7798 3M6X25 88 GOST 7798 70
Testing / Inspection Facility
70
652
Number
7004712035 BOLT GOST 7798 M12X35 GOST 7798 70
Physical Verification needed
Description
7004712035 BOLT GOST 7798 M12X35 GOST 7798-70
Specification
BOLT GOST 7798 M12X35 GOST 7798-70
Drawing no.
BOLT GOST 7798 M12X35 GOST 7798-70
Testing / Inspection Facility
70
472
Number
7004612035 BOLT M12 6GX35 88 38XC 016 GOST 7805 70
Physical Verification needed
Description
7004612035 BOLT M12-6GX35.88.38XC.016 GOST 7805-70
Specification
BOLT M12-6GX35.88.38XC.016 GOST 7805-70
Drawing no.
BOLT M12-6GX35.88.38XC.016 GOST 7805-70
Testing / Inspection Facility
70
330
Number
7002910025 BOLT M10 6GX25 88 38XC 0 GOST 7796 70
Physical Verification needed
Description
7002910025 BOLT M10 6GX25 88 38XC 0 GOST 7796 70
Specification
7002910025 BOLT M10 6GX25 88 38XC 0 GOST 7796 70
Drawing no.
BOLT M10 6GX25 88 38XC 0 GOST 7796 70
Testing / Inspection Facility
70
143
Number
7002008025 BOLT GOST 7796 M8X25 GOST 7796 70
Physical Verification needed
Description
7002008025 BOLT GOST 7796 M8X25 GOST 7796 70
Specification
BOLT GOST 7796 M8X25 GOST 7796 70
Drawing no.
BOLT GOST 7796 M8X25 GOST 7796 70
Testing / Inspection Facility
70
27842
Number
7000108035 BOLT M8X1 6G 35 46 016 GOST 7796 70
Physical Verification needed
Description
7000108035 BOLT M8X1 6G 35 46 016 GOST 7796 70
Specification
BOLT M8X1 6G 35 46 016 GOST 7796 70
Drawing no.
BOLT M8X1 6G 35 46 016 GOST 7796 70
Testing / Inspection Facility
70
767
Number
6206409012 BOLT 172 43 044
Physical Verification needed
Description
6206409012 BOLT 172 43 044
Specification
BOLT 172 43 044
Drawing no.
BOLT 172 43 044
Testing / Inspection Facility
62
1260
Number
9070056934 ROD PISTON RECOIL MECHANISM IFL 8610
Physical Verification needed
Description
9070056934 ROD PISTON RECOIL MECHANISM (IFL-8610)
Specification
9070056934 ROD PISTON RECOIL MECHANISM (IFL-8610)
Testing / Inspection Facility
90
101
Number
9910448016 LEVER CONTROL HAND 2530 017684 ILG 1917 2530 017684
Physical Verification needed
Description
9910448016 LEVER CONTROL HAND (2530-017684), ILG-1917/2530-017684
Specification
9910448016 LEVER CONTROL HAND (2530-017684), ILG-1917/2530-017684
Testing / Inspection Facility
90
220
Number
9070056937 BODY ASSY FOR SHOCK ABSORBER ASSY AMG6893 1015 001762
Physical Verification needed
Description
9070056937 BODY ASSY(FOR SHOCK ABSORBER ASSY) AMG6893/1015-001762
Specification
9070056937 BODY ASSY(FOR SHOCK ABSORBER ASSY) AMG6893/1015-001762
Testing / Inspection Facility
90
23
Number
Body Finished Through IC Machining route for Revolver Side Swing
Description
Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
Specification
Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
Drawing no.
Drg. No. RV-03/1 SW.
Testing / Inspection Facility
All component's passed report provided by firm, as Dimensional reports & Chemical composition report by NABL certified Lab. (Except this load test report also to be passed in case of springs) and Components also to be checked (Dimentional, Chemical, load reports) in Factory on sample basic, clerance should be given after passing of components.
70
250
Number
MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
Physical Verification needed
Description
MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
Specification
MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
Drawing no.
NO. SK-6520/TE
Manufacturing Technology
PRESSURE SHAPING TECHNOLOGY i.e. COLD DIE etc.
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
SPRING AS PER DRAWING NO SK 6517 TE
Physical Verification needed
Description
SPRING AS PER DRAWING NO SK 6517 TE
Specification
SPRING AS PER DRAWING NO SK 6517 TE
Manufacturing Technology
PRESSURE SHAPING TECHNOLOGY i.e. COLD DIE etc.
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
MAIN SPRING AS PER DRAWING NO SK 6522 TE
Physical Verification needed
Description
MAIN SPRING AS PER DRAWING NO SK 6522 TE
Specification
MAIN SPRING AS PER DRAWING NO SK 6522 TE
Manufacturing Technology
SPRING MANUFACTURING TECHNOLOGY (COILING)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
AUTO SAFETY SPRING AS PER DRAWING NO SK 6518 TE
Physical Verification needed
Description
AUTO SAFETY SPRING AS PER DRAWING NO SK 6518 TE
Specification
AUTO SAFETY SPRING AS PER DRAWING NO SK 6518 TE
Drawing no.
NO SK- 6518 /TE
Manufacturing Technology
SPRING MANUFACTURING TECHNOLOGY (COILING)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
SPRING AS PER DRAWING NO SK 6516 TE
Physical Verification needed
Description
SPRING AS PER DRAWING NO SK 6516 TE
Specification
SPRING AS PER DRAWING NO SK 6516 TE
Manufacturing Technology
SPRING MANUFACTURING TECHNOLOGY (COILING)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
SPRING AS PER DRAWING NO SK 6515 TE
Physical Verification needed
Description
SPRING AS PER DRAWING NO SK 6515 TE
Specification
SPRING AS PER DRAWING NO SK 6515 TE
Manufacturing Technology
SPRING MANUFACTURING TECHNOLOGY (COILING)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
SPRING AS PER DRAWING NOS SK 6514 TE
Physical Verification needed
Description
SPRING AS PER DRAWING NOS SK 6514 TE
Specification
SPRING AS PER DRAWING NOS SK 6514 TE
Manufacturing Technology
SPRING MANUFACTURING TECHNOLOGY (COILING)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
RETAINER AS PER DRAWING NO SK 6521 TE
Physical Verification needed
Description
RETAINER AS PER DRAWING NO SK 6521 TE
Specification
RETAINER AS PER DRAWING NO SK 6521 TE
Drawing no.
NO. SK-6521/TE
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
LATCH AS PER DRAWING NO SK 6519 TE
Physical Verification needed
Description
LATCH AS PER DRAWING NO SK 6519 TE
Specification
LATCH AS PER DRAWING NO SK 6519 TE
Drawing no.
NO. SK-6519/TE
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
NUT AS PER DRAWING NO SK 6513 TE
Physical Verification needed
Description
NUT AS PER DRAWING NO SK 6513 TE
Specification
NUT AS PER DRAWING NO SK 6513 TE
Drawing no.
NO. SK-6513/TE
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number
SCREW AS PER DRAWING NO SK 6506 TE
Physical Verification needed
Description
SCREW AS PER DRAWING NO SK 6506 TE
Specification
SCREW AS PER DRAWING NO SK 6506 TE
Drawing no.
NO. SK-6506/TE
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
389272
Number