Name
Code
Quantity
Approx Value
Select
NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264
Physical Verification needed
Description
NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264
Specification
NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264
Testing / Inspection Facility
41
36
Number
SEAR FOR JVPC 5 56 MM
Description
Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA.
Specification
Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA.
Drawing no.
DRG No.0204-03-04-02-14-010-00DA.
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
800
Number
ST FLAT 70X34MM IN HOT ROLLED and ANNEALED CONDITION
Description
ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN
Specification
ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN
Testing / Inspection Facility
01
1481
Kilogram
STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C
Description
STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)
Specification
STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)
Testing / Inspection Facility
03
820
Kilogram
CABLE ASSY WPKS12B
Physical Verification needed
Description
CABLE ASSY WPKS12B (VIEW) AS PER DGR NO.Y18506A-00 FOR TRAVERSE ASSY OF SRCG
Specification
CABLE ASSY WPKS12B (VIEW) AS PER DGR NO.Y18506A-00 FOR TRAVERSE ASSY OF SRCG
Testing / Inspection Facility
74
34
Number
CABLE ASSY WSS3
Physical Verification needed
Description
CABLE ASSY WSS3 (VIEW) AS PER DGR NO.Y18509A-00 FOR STAND ASSY OF SRCG
Specification
CABLE ASSY WSS3 (VIEW) AS PER DGR NO.Y18509A-00 FOR STAND ASSY OF SRCG
Testing / Inspection Facility
74
33
Number
FORGING BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG NO 6528254 FORGE
Physical Verification needed
Description
FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE
Specification
FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE
Testing / Inspection Facility
74
591
Number
PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670
Physical Verification needed
Description
PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
Specification
PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
Testing / Inspection Facility
74
591
Number
PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672
Physical Verification needed
Description
PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
Specification
PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
Testing / Inspection Facility
74
591
Number
for collaboration co production of holographic sight with BDC reticle
Physical Verification needed
Description
for collaboration co production of holographic sight with BDC reticle
Specification
for collaboration co production of holographic sight with BDC reticle
Testing / Inspection Facility
74
1
Number
GEAR AS PER DRAWING NO AL6 373 039 LF7440208431
Physical Verification needed
Description
GEAR AS PER DRAWING NO AL6 373 039 LF7440208431
Specification
GEAR AS PER DRAWING NO AL6 373 039
Drawing no.
DRAWING NO AL6.373.039
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
GEAR AS PER DRAWING NO AL6 373 038 LF7440208430
Physical Verification needed
Description
GEAR AS PER DRAWING NO.AL.6.373.038 LF7440208430
Specification
GEAR AS PER DRAWING NO.AL.6.373.038
Drawing no.
DRAWING NO.AL.6.373.038
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
LEVER AS PER DRAWING NO AL6 354 344 LF 7440208429
Physical Verification needed
Description
LEVER AS PER DRAWING NO AL6 354 344 LF 7440208429
Specification
LEVER AS PER DRAWING NO.AL.6.354.344
Drawing no.
DRAWING NO.AL.6.354.344
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
ARRESTER HANDLE AS PER DRAWING NO AL6 354 342 LF7440208428
Physical Verification needed
Description
ARRESTER HANDLE AS PER DRAWING NO AL6 354 342 LF7440208428
Specification
ARRESTER HANDLE AS PER DRAWING NO AL6 354 342
Drawing no.
DRAWING NO AL6.354.342
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
DRIVE AS PER DRAWING NO AL6 337 172 LF7440208413
Physical Verification needed
Description
DRIVE AS PER DRAWING NO AL6 337 172 LF7440208413
Specification
DRIVE AS PER DRAWING NO AL6 337 172
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
CHANGE MAGNIFICATION MECHANISM NO AL6 063 266 LF7440208411
Physical Verification needed
Description
CHANGE MAGNIFICATION MECHANISM NO AL6 063 266 LF7440208411
Specification
CHANGE MAGNIFICATION MECHANISM NO AL6 063 266
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
DISPLACEMENT MECHANISM DRAWING NO AL6 063 257 LF7440208418
Physical Verification needed
Description
DISPLACEMENT MECHANISM DRAWING NO AL6 063 257 LF7440208418
Specification
DISPLACEMENT MECHANISM DRAWING NO AL6 063 257
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
ALIGNMENT ADJUSTMENT MECHANISM DRG No AL6 060 051 LF7440208417
Physical Verification needed
Description
ALIGNMENT ADJUSTMENT MECHANISM DRG No AL6 060 051 LF7440208417
Specification
ALIGNMENT ADJUSTMENT MECHANISM DRG No AL6 060 051
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
DRIVE AS PER DRAWING NO AL6 337 251 LF7440208422
Physical Verification needed
Description
DRIVE AS PER DRAWING NO AL6 337 251 LF7440208422
Specification
DRIVE AS PER DRAWING NO AL6 337 251
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
DRIVE AS PER DRAWING NO AL6 337 166 LF7440208421
Physical Verification needed
Description
DRIVE AS PER DRAWING NO AL6 337 166 LF7440208421
Specification
DRIVE AS PER DRAWING NO AL6 337 166
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
CARDAN SHAFT AS PER DRAWING NO AL6 308 131 LF7440208434
Physical Verification needed
Description
CARDAN SHAFT AS PER DRAWING NO AL6 308 131 LF7440208434
Specification
CARDAN SHAFT AS PER DRAWING NO AL6 308 131
Testing / Inspection Facility
Testing / Inspection Facility
74
100
Number
CARRIAGE AS PER DRAWING NO AL6 200 149 LF7440208433
Physical Verification needed
Description
CARRIAGE AS PER DRAWING NO AL6 200 149 LF7440208433
Specification
CARRIAGE AS PER DRAWING NO AL6 200 149
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
HOOD AS PER DRAWING NO AL6 437111 LF7440208438
Physical Verification needed
Description
HOOD AS PER DRAWING NO AL6 437111 LF7440208438
Specification
HOOD AS PER DRAWING NO AL6 437111
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
ADJUSTING UNIT AS PER DRAWING NO AL6 060 034 LF7440208432
Physical Verification needed
Description
ADJUSTING UNIT AS PER DRAWING NO AL6 060 034 LF7440208432
Specification
ADJUSTING UNIT AS PER DRAWING NO AL6 060 034
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
SHAFT AS PER DRAWING NO AL6 308 086 LF7440208420
Physical Verification needed
Description
SHAFT AS PER DRAWING NO AL6 308 086 LF7440208420
Specification
SHAFT AS PER DRAWING NO AL6 308 086
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
SHAFT AS PER DRAWING NO AL6 308 084 LF7440208419
Physical Verification needed
Description
SHAFT AS PER DRAWING NO AL6 308 084 LF7440208419
Specification
SHAFT AS PER DRAWING NO AL6 308 084
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
LIGHT FILTER AS PER DRAWING NO AL5 940 393 LF 7440208416
Physical Verification needed
Description
LIGHT FILTER AS PER DRAWING NO AL5 940 393 LF 7440208416
Specification
LIGHT FILTER AS PER DRAWING NO AL5 940 393
Drawing no.
DRAWING NO.AL5 .940.393
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
OBJECTIVE AS PER DRAWING NO AL5 929 069 LF7440208412
Physical Verification needed
Description
OBJECTIVE AS PER DRAWING NO AL5 929 069 LF7440208412
Specification
OBJECTIVE AS PER DRAWING NO AL5 929 069
Drawing no.
DRAWING NO AL5.929.069
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
HORIZONTAL ARRESTER DRAWING NO AL6 280 017 LF7440208425
Physical Verification needed
Description
HORIZONTAL ARRESTER DRAWING NO AL6 280 017 LF7440208425
Specification
HORIZONTAL ARRESTER DRAWING NO AL6 280 017
Drawing no.
DRAWING NO AL6 280 017
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
VERTICAL ARRESTER AS PER DRAWING NO AL6 280 018 LF 7440208424
Physical Verification needed
Description
VERTICAL ARRESTER AS PER DRAWING NO AL6 280 018 LF 7440208424
Specification
VERTICAL ARRESTER AS PER DRAWING NO AL6 280 018
Drawing no.
DRAWING NO.AL6.280.018
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
DRIVE AS PER DRAWING NO AL6 337 271 LF7440208437
Physical Verification needed
Description
DRIVE AS PER DRAWING NO AL6 337 271 LF7440208437
Specification
DRIVE AS PER DRAWING NO AL6 337 271
Drawing no.
DRAWING NO AL6 337 271
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
REDUCTION GEAR AS PER DRAWING NO AL6 332 099 LF 7440208436
Physical Verification needed
Description
REDUCTION GEAR AS PER DRAWING NO AL6 332 099 LF 7440208436
Specification
REDUCTION GEAR AS PER DRAWING NO AL6 332 099
Drawing no.
DRAWING NO AL6 332 099
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
REDUCTION GEAR AS PER DRAWING NO AL6 332 095 LF 7440208435
Physical Verification needed
Description
REDUCTION GEAR AS PER DRAWING NO AL6 332 095
Specification
REDUCTION GEAR AS PER DRAWING NO AL6.332.095
Drawing no.
DRAWING NO AL6.332.095
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
UPPER MIRROR DRIVE AS PER DRAWING NO AL6 337 154 LF 7440208426
Physical Verification needed
Description
UPPER MIRROR DRIVE AS PER DRAWING NO AL6 337 154 LF 7440208426
Specification
UPPER MIRROR DRIVE AS PER DRAWING NO AL.6.337.154
Drawing no.
DRAWING NO AL.6.337.154
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
REDUCTION GEAR AS PER DRAWING NO AL6 332 080 LF 7440208426
Physical Verification needed
Description
REDUCTION GEAR AS PER DRAWING NO AL6 332 080 LF 7440208426
Specification
REDUCTION GEAR AS PER DRAWING NO AL6 332 080
Drawing no.
DRAWING NO.AL.6.332.080
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
ADJUSTING FLANGE AS PER DRAWING NO AL6 063 319 LF 7440208423
Physical Verification needed
Description
ADJUSTING FLANGE AS PER DRAWING NO AL.6.063.319 LF 7440208423
Specification
ADJUSTING FLANGE AS PER DRAWING NO AL.6.063.319
Drawing no.
DRAWING NO AL.6.063.319
Manufacturing Technology
Manufacturing Technology [1]
Testing / Inspection Facility
Testing / Inspection Facility [1]
74
40
Number
BLOCK AS PER DRAWING NO AL6 672 431 LF 7440208410
Physical Verification needed
Description
BLOCK AS PER DRAWING NO AL6 672 431 LF 7440208410
Specification
BLOCK AS PER DRAWING NO AL6 672 431
Drawing no.
DRAWING NO.AL.6.672. 431
Manufacturing Technology
Manufacturing Technology [1]
Testing / Inspection Facility
Testing / Inspection Facility [1]
74
40
Number
ILLUMINATOR AS PER DRAWING NO AL5 142 320 LF 7440208409
Physical Verification needed
Description
ILLUMINATOR AS PER DRAWING NO AL5 142 320 LF 7440208409
Specification
ILLUMINATOR AS PER DRAWING NO AL5 142 320
Manufacturing Technology
Manufacturing Technology [1]
Testing / Inspection Facility
Testing / Inspection Facility [1]
74
40
Number
FLANGE AS PER DRAWING NO AL6 240091 LF7440208408
Physical Verification needed
Description
FLANGE AS PER DRAWING NO AL6 240091 LF7440208408
Specification
FLANGE AS PER DRAWING NO AL6 240091
Drawing no.
DRAWING NO AL6 240091
Manufacturing Technology
Manufacturing Technology [1]
Testing / Inspection Facility
Testing / Inspection Facility [1]
74
40
Number
DRIVE AS PER DRAWING NO AL6337305 LF7440208414
Physical Verification needed
Description
DRIVE AS PER DRAWING NO AL6.337.305 (LF-7440208414)
Specification
DRIVE AS PER DRAWING NO AL6.337.305 (LF-7440208414)
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
SUB ASSEMBLY PRISM As Per DRG No Y 4411296 i Prism AP 90 Deg DRG No Y 7160336 ii Prism AP 90 Deg DRG No Y 7170036
Physical Verification needed
Description
SUB ASSEMBLY PRISM, As Per DRG. NO. Y-4411296
i). Prism AP-90 Deg. DRG. No. Y-7160336
ii). Prism AP-90 Deg. DRG. No. Y-7170036
Specification
SUB ASSEMBLY PRISM, As Per DRG. NO. Y-4411296
i). Prism AP-90 Deg. DRG. No. Y-7160336
ii). Prism AP-90 Deg. DRG. No. Y-7170036
Drawing no.
DRG. NO. Y-4411296 { (i). Prism AP-90 Deg. DRG. No. Y-7160336 (ii). Prism AP-90 Deg. DRG. No. Y-7170036}
Testing / Inspection Facility
26
73
Set
INVESTMENT CASTING COCKING BRACKET
Description
INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*1
Specification
INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*1
Drawing no.
SK-JVPC-598*1
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
70
1075
Number
CABLE ASSY WNH5A
Physical Verification needed
Description
CABLE ASSY WNH5A AS PER DRGNO.Y20099A-00 FOR SRCG
Specification
CABLE ASSY WNH5A AS PER DRGNO.Y20099A-00 FOR SRCG
Testing / Inspection Facility
74
33
Number
CABLE ASSY WNH1A
Physical Verification needed
Description
CABLE ASSY WNH1A AS PER DRG No.Y20105A-00 FOR SRCG
Specification
CABLE ASSY WNH1A AS PER DRG No.Y20105A-00 FOR SRCG
Testing / Inspection Facility
74
33
Number
CABLE ASSY WNH2
Physical Verification needed
Description
CABLE ASSY WNH2 AS PER DRG No.Y20104A-00 FOR SRCG
Specification
CABLE ASSY WNH2 AS PER DRG No.Y20104A-00 FOR SRCG
Testing / Inspection Facility
74
33
Number
CABLE ASSY WNH3A
Physical Verification needed
Description
CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG
Specification
CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG
Testing / Inspection Facility
74
33
Number
BLOCK STORAGE WELDED
Description
BLOCK STORAGE WELDED (VIEW) AS PER DRG .Y17592A-00 FOR STAND WEAPON ASSY OF SRCG.
Specification
BLOCK STORAGE WELDED (VIEW) AS PER DRG .Y17592A-00 FOR STAND WEAPON ASSY OF SRCG.
Testing / Inspection Facility
74
34
Number
WASHER LOCK TAB M4
Physical Verification needed
Description
WASHER LOCK TAB M4 AS PER DRG Y00963A-00 FOR STAND WEAPON ASSY OF SRCG
Specification
WASHER LOCK TAB M4 AS PER DRG Y00963A-00 FOR STAND WEAPON ASSY OF SRCG
Testing / Inspection Facility
74
102
Number
SLIDER LINKS M9 WELDMENT
Physical Verification needed
Description
SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG
Specification
SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG
Testing / Inspection Facility
SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG
74
33
Number
WRENCH
Physical Verification needed
Description
WRENCH (View) AS PER DRG NO.Y28656A-00 FOR STAND WEAPON ASSY OF SRCG
Specification
WRENCH (View) AS PER DRG NO.Y28656A-00 FOR STAND WEAPON ASSY OF SRCG
Testing / Inspection Facility
74
34
Number
SPRING FLAT
Physical Verification needed
Description
SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG
Specification
SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG
Testing / Inspection Facility
74
34
Number
SPACER
Physical Verification needed
Description
SPACER (View) AS PER DRG NO.075389A-00 FOR COCKING MECH.ASSY OF SRCG
Specification
SPACER (View) AS PER DRG NO.075389A-00 FOR COCKING MECH.ASSY OF SRCG
Testing / Inspection Facility
74
17
Number
Screw Breech Lock Cam OOW50BMG as per Drawing No 5152938 of M2HB Gun
Physical Verification needed
Description
Screw, Breech Lock Cam, OOW50BMG as per Drawing No. 5152938 of M2HB Gun
Specification
Screw, Breech Lock Cam, OOW50BMG as per Drawing No. 5152938 of M2HB Gun
Drawing no.
Screw, Breech Lock Cam, OOW50BMG as per Drawing No. 5152938 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
Bearing Breech OOW50BMG as per Drawing No 6008920 of M2HB Gun
Physical Verification needed
Description
Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun
Specification
Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun
Drawing no.
Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
83
Number
Pin Belt Holding Pawl OOW50BMG as per Drawing No 7162872 of M2HB Gun
Physical Verification needed
Description
Pin, Belt Holding Pawl, OOW50BMG as per Drawing No. 7162872 of M2HB Gun
Specification
Pin, Belt Holding Pawl, OOW50BMG as per Drawing No. 7162872 of M2HB Gun
Drawing no.
Pin, Belt Holding Pawl, OOW50BMG as per Drawing No. 7162872 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number