3761
MPV/Welding Electrode
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
Name
Code
Quantity
Approx Value
Select
Co Driver Side Glass with Gun Port Hole with Rubber Beading
Physical Verification needed
Description
Co-Driver Side Glass with Gun Port Hole with Rubber Beading Drg. No. ST-II/5009-67-31/B
Specification
Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the specification.
Drawing no.
Drg. No. ST-II/5009-67-31/B, VFJ will transmit/ forward the soft copy (password protected pdf file) of Drawing to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the Drawing.
Manufacturing Technology
As per Specification & Drawing.
Testing / Inspection Facility
As per Specification & Drawing.
90
133
Number
Driver Side Glass with Gun Port Hole with Rubber Beading
Physical Verification needed
Description
Driver Side Glass with Gun Port Hole with Rubber Beading Drg. No. ST-II/5007-67-31/B
Specification
Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the specification.
Drawing no.
Drg. No. ST-II/5007-67-31/B, VFJ will transmit/ forward the soft copy (password protected pdf file) of Drawing to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the Drawing.
Manufacturing Technology
As per Specification & Drawing.
Testing / Inspection Facility
As per Specification & Drawing.
90
133
Number
Windshield Glass with Rubber Beading
Physical Verification needed
Description
Windshield Glass with Rubber Beading, Drg. No. ST-II/5001-67-31/B
Specification
Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the specification.
Drawing no.
Drg. No. ST-II/5001-67-31/B, VFJ will transmit/ forward the soft copy (password protected pdf file) of Drawing to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the Drawing.
Manufacturing Technology
As per Specification & Drawing.
Testing / Inspection Facility
As per Specification & Drawing.
90
266
Number
3762
EOI/PROVISIONAL/REGULARIZATION
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
Name
Code
Quantity
Approx Value
Select
BEACON BENDROL SETS ARTY B COMPLETE
Description
BEACON BENDROL, SETS ARTY "B" COMPLETE
Specification
DRAWING NO.IND/GS/568(K)(1510/PK DT. 23.6.04) & SUPP. SCH.NO.CQA(GS)SS/411 (A) (5809/PK DT.15.03.04). CAT PART NO.: V3/6675-000138.
Manufacturing Technology
As per specification and drawing attached.
Testing / Inspection Facility
As per specification and drawing attached.
21
As per requirement.
Set
3763
OLF/MM-2/T-1906010031
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
ZNS CLEAR GRADE WINDOW 1 AS PER DRG NO 27009502 LF NO 2690000152
Physical Verification needed
Description
ZNS CLEAR GRADE WINDOW 1 AS PER DRG NO 27009502 LF NO 2690000152
Specification
ZNS CLEAR GRADE WINDOW 1 AS PER DRG NO 27009502 LF NO 2690000152
Drawing no.
2700 950 2 SPEC NO CDR TI T-90/OPT/ZNS/02
Testing / Inspection Facility
26
171
Number
GLASS MOULD FOR PRISM LF 9927093283
Physical Verification needed
Description
GLASS MOULD FOR PRISM
Specification
GLASS MOULD FOR PRISM, ALL CHARACTERISTICS AS PER DRAWING NO. OLF/B/7200068/084. GLASS K-108, REFRACTIVE INDEX=1.516373, ABBE VALUE(VD)=64.07. DENSITY OF GLASS=2.52 GM/CC
Drawing no.
OLF/B/7200068/084
Testing / Inspection Facility
99
1132
Number
3764
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031 for TAR
Description
Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031* for TAR
Specification
Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031* for TAR
Drawing no.
DRG No K 1031* for TAR
Manufacturing Technology
AS PER DRG No K 1031* for TAR
Testing / Inspection Facility
AS PER DRG No K 1031* for TAR
70
8827
Number
3765
2019000129
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY CLOSED END TYPE F DOUBLE PULLER NON LOCK SLIDERS OG 61 CM
Description
PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY CLOSED END TYPE F DOUBLE PULLER NON LOCK SLIDERS OG 61 CM
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013.
Specification
PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY CLOSED END TYPE F DOUBLE PULLER NON LOCK SLIDERS OG 61 CM
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013.
Manufacturing Technology
AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES
Testing / Inspection Facility
AS PER ATTACHED TESTING/INSPECTION FACILITY
21
131473
Number
FASTENER PLASTIC SLIDE MEDIUM DUTY OG 32 CM LONG
Description
FASTENER PLASTIC SLIDE MEDIUM DUTY OG 32 CM LONG (CLOSED END ONE WAY WITH NON LOCK SLIDER)
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013
Specification
FASTENER PLASTIC SLIDE MEDIUM DUTY OG 32 CM LONG (CLOSED END ONE WAY WITH NON LOCK SLIDER)
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013
Manufacturing Technology
AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES
Testing / Inspection Facility
AS PER ATTACHED TESTING / INSPECTION FACILITY FILES
21
131505
Number
FASTENER PLASTIC SLIDE HEAVY DUTY OG 61 CM LONG
Description
FASTENER PLASTIC SLIDE HEAVY DUTY OG 61 CM LONG (CLOSED END ONE WAY WITH NON LOCK SLIDER)
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013
Specification
FASTENER PLASTIC SLIDE HEAVY DUTY OG 61 CM LONG (CLOSED END ONE WAY WITH NON LOCK SLIDER)
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013
Manufacturing Technology
AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES
Testing / Inspection Facility
AS PER ATTACHED TESTING / INSPECTION FACILITY FILES
21
262947
Number
Disc Wheel X3801314 A
Description
DISC WHEEL 9.0 X 20 STLN MK-IV, VEHICLE PT. NO. X3801314-A
Specification
DISC WHEEL 9.0 X 20 STLN MK-IV, VEHICLE PT. NO. X3801314-A
Testing / Inspection Facility
90
500
Number
CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING
Description
CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020
Specification
CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020
Drawing no.
640-01-1106-01/A
Manufacturing Technology
AS PER ANNEXURE 'A' (SCOPE OF WORK)
Testing / Inspection Facility
AS PER ANNEXURE 'A' (SCOPE OF WORK)
90
1200
Metre
3766
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
3767
3193000956
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Steel Rod 46mm Dia for MAG
Description
Steel rod 46+0.0/-0.50mm Dia. to specification JSS:9510-06-2012, Rev. No. 3 Code Ref. Bin T3 condition with composition restricted S%-0.010 max. P%-0.015 Max. & (S+P)%-0.022 Max. for MAG 7.62mm Barrel. Testing parameters as per QA I No. QA-1/QA/14 (Appendix Enclosed) (Q. AOD/VOD).
Specification
Steel rod 46+0.0/-0.50mm Dia. to specification JSS:9510-06-2012, Rev. No. 3 Code Ref. Bin T3 condition with composition restricted S%-0.010 max. P%-0.015 Max. & (S+P)%-0.022 Max. for MAG 7.62mm Barrel. Testing parameters as per QA I No. QA-1/QA/14 (Appendix Enclosed) (Q. AOD/VOD).
Testing / Inspection Facility
Chemical and Mechanical prosperities as per std. given drawing
01
22796
Kilogram
Three Layer WP Breathable Fabric Dual Shade OG White 118 cm width
Description
Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 cm width
Specification:- As per Appendix "A" of Prov. Specification No. IND/TC/4587(d) and amendment no. 1
Specification
Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 cm width
Specification:- As per Appendix "A" of Prov. Specification No. IND/TC/4587(d) and amendment no. 1
Manufacturing Technology
As per attached Manufacturing Technology Files
Testing / Inspection Facility
as per attached Testing/Inspection facility Files
21
79632
Metre
Plate Body For Revolver Side Swing Through MIM Route
Description
Plate Body For Revolver 0.32 Side Swing Drg. No. RV-03/2 SW. (Through MIM Route)
Specification
Plate Body For Revolver 0.32 Side Swing Drg. No. RV-03/2 SW. (Through MIM Route)
Drawing no.
Plate Body For Revolver 0.32 Side Swing Drg. No. RV-03/2 SW. (Through MIM Route)
Testing / Inspection Facility
As per Annexure A for Revolver Side Swing
70
2500
Number
Body Finished Through IC Machining route for Revolver Side Swing
Description
Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
Specification
Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
Drawing no.
Drg. No. RV-03/1 SW.
Testing / Inspection Facility
All component's passed report provided by firm, as Dimensional reports & Chemical composition report by NABL certified Lab. (Except this load test report also to be passed in case of springs) and Components also to be checked (Dimentional, Chemical, load reports) in Factory on sample basic, clerance should be given after passing of components.
70
1250
Number
PLASTIC SLIDE FASTNERS MEDIUM HEAVY DUTY OG OPEN END 87 CMS
Description
PLASTIC SLIDE FASTNERS MEDIUM HEAVY DUTY OG WITH TWO A/LOCK SLIDER FACING THE TWO OPEN ENDS 87 CM
SPECIFICATION: IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008.PACKING & MARKING : AS PER RELEVENT CLAUSE OF SPECIFICATION
Sampling Plan: As per relevant clause of specification
Specification
PLASTIC SLIDE FASTNERS MEDIUM HEAVY DUTY OG WITH TWO A/LOCK SLIDER FACING THE TWO OPEN ENDS 87 CM
SPECIFICATION: IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008.PACKING & MARKING : AS PER RELEVENT CLAUSE OF SPECIFICATION
Sampling Plan: As per relevant clause of specification
Manufacturing Technology
AS PER ATTACHED Manufacturing Technology Files
Testing / Inspection Facility
AS PER ATTACHED Testing / Inspection Facility Files
21
21624
Number
Fabric Nylon Knitted Aluminized Coated 100cm Min width
Description
Fabric Nylon Knitted Aluminized Coated 100cm Min width
Specification:- IND/TC/0161
Specification
Fabric Nylon Knitted Aluminized Coated 100cm Min width
Specification:- IND/TC/0161
Manufacturing Technology
as per attached Manufacturing Technology Files
Testing / Inspection Facility
as per attached Testing / Inspection Facility Files
21
59342
Metre
Fabrication of Ground Sheet TPO OG
Description
Fabrication of Ground Sheet TPO OG
Specification - JSS 8305-35:2014
Specification
Fabrication of Ground Sheet TPO OG
Specification - JSS 8305-35:2014
Manufacturing Technology
as per attached manufacturing technology files
Testing / Inspection Facility
as per attached testing/inspection technology files
21
140000
Number
9069112853 CAGE ASSY TO DRG NO 4020608
Physical Verification needed
Description
9069112853 CAGE ASSY TO DRG NO 4020608
Specification
9069112853 CAGE ASSY TO DRG NO 4020608
Manufacturing Technology
9069112853 CAGE ASSY TO DRG NO 4020608
Testing / Inspection Facility
9069112853 CAGE ASSY TO DRG NO 4020608
90
240
Number
OIL PRESSURE GAUGE RANGE 25 KG SQ CM TO CAT PT NO M2 BOF 5053553
Physical Verification needed
Description
OIL PRESSURE GAUGE RANGE 25 KG SQ CM TO CAT PT NO M2 BOF 5053553
Specification
OIL PRESSURE GAUGE RANGE 25 KG SQ CM TO CAT PT NO M2 BOF 5053553
Manufacturing Technology
OIL PRESSURE GAUGE RANGE 25 KG SQ CM TO CAT PT NO M2 BOF 5053553
Testing / Inspection Facility
OIL PRESSURE GAUGE RANGE 25 KG SQ CM TO CAT PT NO M2 BOF 5053553
90
24
Number
SPRING PAWL SMALL TO DRG NO BOF 6095872
Physical Verification needed
Description
SPRING PAWL SMALL TO DRG NO BOF 6095872
Specification
SPRING PAWL SMALL TO DRG NO BOF 6095872
Manufacturing Technology
SPRING PAWL SMALL TO DRG NO BOF 6095872
Testing / Inspection Facility
SPRING PAWL SMALL TO DRG NO BOF 6095872
90
205
Number
SPRING TO DRG NO BOF 5073478
Description
SPRING TO DRG.NO.BOF-5073478
Specification
SPRING TO DRG.NO.BOF-5073478
Manufacturing Technology
SPRING TO DRG.NO.BOF-5073478
Testing / Inspection Facility
SPRING TO DRG.NO.BOF-5073478
90
31
Number
SPRING FIRING ROD FOR GEAR FIRING TO DRG NO BOF 6002487
Physical Verification needed
Description
SPRING FIRING ROD FOR GEAR FIRING TO DRG NO BOF 6002487
Specification
SPRING FIRING ROD FOR GEAR FIRING TO DRG NO BOF 6002487
Manufacturing Technology
SPRING FIRING ROD FOR GEAR FIRING TO DRG NO BOF 6002487
Testing / Inspection Facility
SPRING FIRING ROD FOR GEAR FIRING TO DRG NO BOF 6002487
90
207
Number
SPRING RETURN PEDAL BOF 6002488
Physical Verification needed
Description
SPRING RETURN PEDAL BOF 6002488
Specification
SPRING RETURN PEDAL BOF 6002488
Manufacturing Technology
SPRING RETURN PEDAL BOF 6002488
Testing / Inspection Facility
SPRING RETURN PEDAL BOF 6002488
90
117
Number
SPRING TO DRG BOF 6014285
Physical Verification needed
Description
SPRING BOF 6104236
Specification
SPRING BOF 6104236
Testing / Inspection Facility
90
20
Number
9069112641 SPRING BOF 6104236
Physical Verification needed
Description
SPRING BOF 6104236
Specification
SPRING BOF 6104236
Testing / Inspection Facility
90
18
Number
FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN
Description
FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN.
SPECIFICATION:- JSS 8305-32-2003
Specification
FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN.
SPECIFICATION:- JSS 8305-32-2003
Manufacturing Technology
AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES
Testing / Inspection Facility
AS PER ATTACHED TESTING / INSPECTION FACILITY FILES
21
30620
Metre
HAMMER FOR REVOLVER SIDE SWING
Description
HAMMER FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-05/1 SW.
Specification
HAMMER FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-05/1 SW.
Drawing no.
HAMMER FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-05/1 SW.
Testing / Inspection Facility
All component's passed report provided by firm, as dimensional reports & chemical composition report by NABL certified Lab. ( Except this Load test report also to be passed in case of springs) and components also to be checked (dimensional, chemical, load reports) in Factory on sample basic, clearance should be given after passing of components.
70
2625
Number
Crane and Arm For Revolver Side Swing Through MIM route
Description
Crane and Arm For Revolver 0.32 Side Swing Drg. No. RV-04/9 SW. (Through MIM route)
Specification
Crane and Arm For Revolver 0.32 Side Swing Drg. No. RV-04/9 SW. (Through MIM route)
Drawing no.
Crane and Arm For Revolver 0.32 Side Swing Drg. No. RV-04/9 SW. (Through MIM route)
Testing / Inspection Facility
All component's passed report provided by firm, as dimensional reports & chemical composition report by NABL certified Lab. ( Except this Load test report also to be passed in case of springs) and components also to be checked (dimensional, chemical, load reports) in Factory on sample basic, clearance should be given after passing of components.
70
2625
Number
CATCH MAGAZINE
Physical Verification needed
Description
CATCH MAGAZINE TO DS CAT NO.1005-001539(ICR 1199) DC NO.27063-SA DT. 03.05.2017 WITH FIRMS MATERIAL. FOR DC NUMBER LATEST ISSUE TO BE FOLLOWED
Specification
AS PER DRAWING
Drawing no.
DS CAT NO.1005-001539(ICR 1199) DC NO.27063-SA DT. 03.05.2017
Manufacturing Technology
AS PER DRAWING AS PER DRAWING AS PER DRAWING AS PER DRAWING AS PER DRAWING
Testing / Inspection Facility
The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing
70
1500
Number
CATCH MAGAZINE
Physical Verification needed
Description
CATCH MAGAZINE TO DS CAT NO.1005-001539(ICR 1199) DC NO.27063-SA DT. 03.05.2017 WITH FIRMS MATERIAL. FOR DC NUMBER LATEST ISSUE TO BE FOLLOWED
Specification
AS PER DRAWING
Drawing no.
DS CAT NO.1005-001539(ICR 1199) DC NO.27063-SA DT. 03.05.2017
Manufacturing Technology
AS PER DRAWING AS PER DRAWING AS PER DRAWING AS PER DRAWING AS PER DRAWING
Testing / Inspection Facility
The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing
70
1500
Number
LEVER CHANGE
Physical Verification needed
Description
LEVER CHANGE TO DS CAT NO. 1005-001644 (ICR 1312) DC NO.27064-SA DT. 03-05-2017 WITH FIRMS MATERIAL. FOR DC NUMBER LATEST ISSUE TO BE FOLLOWED.
Specification
AS PER DRAWING
Drawing no.
DS CAT NO. 1005-001644 (ICR 1312) DC NO.27064-SA DT. 03-05-2017
Manufacturing Technology
AS PER DRAWING AS PER DRAWING AS PER DRAWING AS PER DRAWING AS PER DRAWING
Testing / Inspection Facility
The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing The firm should possess the infrastructure required for the inspection of the subject component as per drawing
70
1500
Number
Trade Fabrication of Synthetic Frog Bayonet
Description
Trade Fabrication of Synthetic Frog Bayonet
Specification
specn No. Prov. IND/TC/1550 (With amendment NO.1) (7201/PK)
Manufacturing Technology
As per specification attached.
Testing / Inspection Facility
As per specification attached.
21
As per requirement
Number
Tape Nylon Thin Thick OG OFF Sizes For Synthetic Web Equipt Improved version pouches Ammn
Description
Tape Nylon Thin Thick OG OFF Sizes (For Synthetic Web Equipt Improved version pouches Ammn) One set consisting of the following.
1.Tape nylon thick 13MM OG 0.32Mtr
2.Tape nylon thick 25MM OG 0.7325Mtr
3.Tape nylon thick 51MM OG 2.58Mtr
4.Tape nylon 19MM OG 8.3553Mtr
Specification
Specn No. Prov. Specn No. DMSRDE/T&GS/92/403 & JSS:8315-6 For Tape Nylon 19MM OG
Note: Firm will supply the material in set haviong same colour. One bale will consists of not more than 30 KG
Manufacturing Technology
As per specification attached
Testing / Inspection Facility
As per specification attached
21
As per requirement
Set
Rope Nylon H L 8MM Dia Undyed
Description
Rope Nylon H/L 8 MM Dia Undyed
Specification
Specn No.-JSS-4020-1 for Construction, Material and Breaking strength
Manufacturing Technology
As per specification attached
Testing / Inspection Facility
As per specification attached
21
As per requirement
Metre
Trade Fabrication of Chagul Universal MK II
Description
Trade Fabrication of Chagul Universal MK- II
Specification
Specn No.- OEF/01/19443 with 1 Drg. Plate attached (7104/PK)
Testing / Inspection Facility
21
As per requirement
Number
3768
110190301
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
Cordage Nylon 66 250 kgf with core U D
Description
Cordage Nylon 66, 250 kgf with core U/D
Specification
ADRDE/QMS/TDTM/C/2013/05 (a), dtd. 10.01.2020
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101726679
37859
Metre
Webbing Nylon 60 mm BS 4000 Kg U D
Description
Webbing Nylon 60 mm BS 4000 Kg. U/D
Specification
ADRDE/QMS/TGTE/W/2021/06 (a) Dated :- 23/11/2022.
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101221368
2351
Metre
BRAKE SHOE TO DRG NO BOF 4020778
Physical Verification needed
Description
BRAKE SHOE TO DRG NO BOF-4020778
Specification
BRAKE SHOE TO DRG NO BOF-4020778
Testing / Inspection Facility
90
162
Number
MACHINING OF RACK EXTERNAL INTER
Physical Verification needed
Description
MACHINING OF RACK EXTERNAL TO DRG.NO.3013787 & RACK INTERNAL
TO DRG.NO.3031977. (FORGED RING WILL BE SUPPLIED BY GCF AFTER
HEAT TREATMENT AT GCF)
Specification
MACHINING OF RACK EXTERNAL TO DRG.NO.3013787 & RACK INTERNAL
TO DRG.NO.3031977. (FORGED RING WILL BE SUPPLIED BY GCF AFTER
HEAT TREATMENT AT GCF)
Manufacturing Technology
As per tender document part A & QAP
Testing / Inspection Facility
As per tender document part A & QAP
90
124
Number
INSULATION SLEEVING ELECTRICAL TO DRG NO 5970 002812
Physical Verification needed
Description
INSULATION SLEEVING ELECTRICAL TO DRG.NO.5970-002812.
Specification
INSULATION SLEEVING ELECTRICAL TO DRG.NO.5970-002812.
Manufacturing Technology
As per tender document part A & QAP
Testing / Inspection Facility
As per tender document part A & QAP
90
551
Number
PLATE TOP WELDING MACHINING TO DRG NO 3021409
Physical Verification needed
Description
PLATE TOP WELDING & MACHINING TO DRG.NO.3021409
Specification
PLATE TOP WELDING & MACHINING TO DRG.NO.3021409
Manufacturing Technology
As per tender document part A & QAP
Testing / Inspection Facility
As per tender document part A & QAP
90
120
Number
CONTACTOR ASSY TO DRG NO 2A42 07 000Cb C7000
Physical Verification needed
Description
CONTACTOR ASSY TO DRG NO 2A42 07 000Cb C7000
Specification
AS PER CONTACTOR ASSY TO DRG NO 2A42 07 000Cb C7000
Manufacturing Technology
AS PER CONTACTOR ASSY TO DRG NO 2A42 07 000Cb C7000
Testing / Inspection Facility
PDI inspection and Class C Test
70
47
Number
LF NO 7441121482 SEALED KEY BOARD WITH OMRON ILLUMINATED SWITCH
Physical Verification needed
Description
LF NO 7441121482 SEALED KEY BOARD WITH OMRON IL
LUMINATED SWITCH AS PER SPECN.
NO. CDR TI T-90/EL/SKB//02
Specification
LF NO 7441121482 SEALED KEY BOARD WITH OMRON IL
LUMINATED SWITCH AS PER SPECN.
NO. CDR TI T-90/EL/SKB//02
Drawing no.
7441121482 SEALED KEY BOARD WITH OMRON IL LUMINATED SWITCH AS PER SPECN. NO. CDR TI T-90/EL/SKB//02
Testing / Inspection Facility
74
158
Number
9001120370 WIRE MGSHV
Physical Verification needed
Description
9001120370 WIRE-MGSHV-1.0 SQMM
Drg No.RUSSIANSPECN:TY16505437-82
UNSHIELDED MULTISTRAND FLEXIBL
E FIBROUS LAPPED & PVC
INSULATED WIRE MGSHV-1.0 SQMM
(32/0.20) IN BROWN COLOUR
AS PER TY16-505.437-82
Specification
9001120370 WIRE-MGSHV-1.0 SQMM
Drg No.RUSSIANSPECN:TY16505437-82
UNSHIELDED MULTISTRAND FLEXIBL
E FIBROUS LAPPED & PVC
INSULATED WIRE MGSHV-1.0 SQMM
(32/0.20) IN BROWN COLOUR
AS PER TY16-505.437-82
Drawing no.
9001120370 WIRE-MGSHV-1.0 SQMM Drg No.RUSSIANSPECN:TY16505437-82 UNSHIELDED MULTISTRAND FLEXIBL E FIBROUS LAPPED & PVC INSULATED WIRE MGSHV-1
Testing / Inspection Facility
90
4858
Metre
LF NO 7441120199 WIRE MPO
Physical Verification needed
Description
7441120199
WIRE MPO 0.12 ,
AS PER SPEC.NO. TU16-505.339-7
9
Specification
7441120199
WIRE MPO 0.12 ,
AS PER SPEC.NO. TU16-505.339-7
9
Drawing no.
7441120199 WIRE MPO 0.12 , AS PER SPEC.NO. TU16-505.339-7 9
Testing / Inspection Facility
74
7320
Metre
LF NO 7441122125 POWER SUPPLY UNIT
Physical Verification needed
Description
7441122125 POWER SUPPLY UNIT AS PER SPECN
. NO. GMIL.435154.001
Specification
7441122125 POWER SUPPLY UNIT AS PER SPECN
. NO. GMIL.435154.001
Drawing no.
7441122125 POWER SUPPLY UNIT AS PER SPECN . NO. GMIL.435154.001
Testing / Inspection Facility
74
141
Number
3769
HVF/TE0102190209/2019-20/TA/CBOI/SD-OTE dt 03/02/2020
Heavy Vehicle Factory
The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
CYLINDER ASSEMBLY DRAWING TO 6201259002
Physical Verification needed
Description
CYLINDER ASSEMBLY DRAWING TO DRG NO.155.59.233SB-1SB
Specification
CYLINDER ASSEMBLY DRAWING TO DRG NO.155.59.233SB-1SB
Drawing no.
155.59.233SB-1SB
Testing / Inspection Facility
62
210
Number
PIN SPANNER CALIBER FACE SPANNER ADJUSTABLE DIA 6MM TO DRG NO GCF 50 41030
Physical Verification needed
Description
PIN SPANNER CALIBER FACE SPANNER ADJUSTABLE DIA 6MM TO DRG NO GCF 50 41030
Specification
PIN SPANNER CALIBER FACE SPANNER ADJUSTABLE DIA 6MM TO DRG NO GCF 50 41030
Manufacturing Technology
PIN SPANNER CALIBER FACE SPANNER ADJUSTABLE DIA 6MM TO DRG NO GCF 50 41030
Testing / Inspection Facility
PIN SPANNER CALIBER FACE SPANNER ADJUSTABLE DIA 6MM TO DRG NO GCF 50 41030
90
11
Number
HOOK SPANNER WRENCH WITH LUG ACCORDING TO DIN 1810 FORM A AGAINST DRG NO GCF 50 41015
Physical Verification needed
Description
HOOK SPANNER WRENCH WITH LUG ACCORDING TO DIN 1810 FORM A AGAINST DRG NO GCF 50 41015
Specification
HOOK SPANNER WRENCH WITH LUG ACCORDING TO DIN 1810 FORM A AGAINST DRG NO GCF 50 41015
Manufacturing Technology
HOOK SPANNER WRENCH WITH LUG ACCORDING TO DIN 1810 FORM A AGAINST DRG NO GCF 50 41015
Testing / Inspection Facility
HOOK SPANNER WRENCH WITH LUG ACCORDING TO DIN 1810 FORM A AGAINST DRG NO GCF 50 41015
90
5
Number
PLATE C2036
Physical Verification needed
Description
AS PER OFB REQUIREMENTS
Specification
AS PER OFB REQUIREMENTS
Testing / Inspection Facility
42
171
Number
PLATE C2021
Physical Verification needed
Specification
AS PER OFB REQUIREMENTS
Testing / Inspection Facility
42
155
Number
STOP C5006
Physical Verification needed
Specification
AS PER OFB REQUIREMENTS
Testing / Inspection Facility
70
178
Number
PLATE C5007
Physical Verification needed
Specification
PLATE C5007
Testing / Inspection Facility
70
180
Number
CLAMP C5004
Physical Verification needed
Specification
AS PER OFB REQUIREMENTS
Testing / Inspection Facility
70
181
Number
LF 9001121783 FISCHER CONNECTORS
Physical Verification needed
Description
9001121783 FISCHER CONNECTORS
FISCHER CONNECTORS MAKE DBPU 1
04 A092-149 PANEL MOUNT RECEPT
ACLE WITH 19 FEMALE SOLDER BUC
KET PINS
Specification
9001121783 FISCHER CONNECTORS
FISCHER CONNECTORS MAKE DBPU 1
04 A092-149 PANEL MOUNT RECEPT
ACLE WITH 19 FEMALE SOLDER BUC
KET PINS
Drawing no.
9001121783 FISCHER CONNECTORS FISCHER CONNECTORS MAKE DBPU 1 04 A092-149 PANEL MOUNT RECEPT ACLE WITH 19 FEMALE SOLDER BUC KET PINS
Testing / Inspection Facility
90
399
Number
9001121781 FISCHER CENNECTORS
Physical Verification needed
Description
FISCHER CONNECTORS MAKE DEE 10
3 A015-700 PANEL MOUNT RECEPTA
CLE WITH FEMALE SOLDER BUCKET
PINS
Specification
FISCHER CONNECTORS MAKE DEE 10
3 A015-700 PANEL MOUNT RECEPTA
CLE WITH FEMALE SOLDER BUCKET
PINS
Testing / Inspection Facility
90
239
Number
LF 9001121368 CON CIRS THD RP MALE SHRG
Physical Verification needed
Description
9001121368 CON CIRS THD RP MALE SHRG
CON CIRS THD RP MALE SHRG 20/4
/8 (HARNESS CONNECTOR)
AS PER BEL PART NO. 461573051
014 / OEM PART NO.SHRG20P4ESH8
(AMPHENOL INTERCONNECT PVT. L
TD.
Specification
9001121368 CON CIRS THD RP MALE SHRG
CON CIRS THD RP MALE SHRG 20/4
/8 (HARNESS CONNECTOR)
AS PER BEL PART NO. 461573051
014 / OEM PART NO.SHRG20P4ESH8
(AMPHENOL INTERCONNECT PVT. L
TD.
Drawing no.
9001121368 CON CIRS THD RP MALE SHRG CON CIRS THD RP MALE SHRG 20/4 /8 (HARNESS CONNECTOR) AS PER BEL PART NO. 461573051 014 / OEM PART NO.SHRG20P4ESH8 (AMPHENOL INTERCONNECT PVT. L TD.
Testing / Inspection Facility
90
145
Number
7441121758 FISCHER CONNECTORS MAKE 4 PIN
Physical Verification needed
Description
FISCHER CONNECTORS MAKE 4 PIN
CONNECTOR CONSISTING OF (A)
REAR MOUNTED PANEL RECEPTACLE
(UR01W07 F004P BK1 E2AA), (B)
SHORT CABLE PLUG (UP01L07 M00
4S BK1 Z2ZA) & (C) BEND RELIEF
(UB07 A1BK DIA 1.9)
Specification
FISCHER CONNECTORS MAKE 4 PIN
CONNECTOR CONSISTING OF (A)
REAR MOUNTED PANEL RECEPTACLE
(UR01W07 F004P BK1 E2AA), (B)
SHORT CABLE PLUG (UP01L07 M00
4S BK1 Z2ZA) & (C) BEND RELIEF
(UB07 A1BK DIA 1.9)
Testing / Inspection Facility
74
397
Number
LF 7441121743 13 PIN RECEPTACLE CONNECTOR
Physical Verification needed
Description
7441121743 13 PIN RECEPTACLE CONNECTOR
Drg No.D38999/24-W-B-35PA
13 PIN RECEPTACLE CONNECTOR AS
PER AMPHENOL PART NO.
D38999/24-W-B-35PA
Specification
7441121743 13 PIN RECEPTACLE CONNECTOR
Drg No.D38999/24-W-B-35PA
13 PIN RECEPTACLE CONNECTOR AS
PER AMPHENOL PART NO.
D38999/24-W-B-35PA
Drawing no.
7441121743 13 PIN RECEPTACLE CONNECTOR Drg No.D38999/24-W-B-35PA 13 PIN RECEPTACLE CONNECTOR AS PER AMPHENOL PART NO. D38999/24-W-B-35PA
Testing / Inspection Facility
74
435
Number
LF 7441121742 90 DEG BACKSHELL
Physical Verification needed
Description
LF 7441121742 90 DEG BACKSHELL
Drg No.M85049/79-11W02
90 DEG BACKSHELL AS PER AMPHEN
OL PART NO. M85049/79-11W02
Specification
LF 7441121742 90 DEG BACKSHELL
Drg No.M85049/79-11W02
90 DEG BACKSHELL AS PER AMPHEN
OL PART NO. M85049/79-11W02
Drawing no.
LF 7441121742 90 DEG BACKSHELL Drg No.M85049/79-11W02 90 DEG BACKSHELL AS PER AMPHEN OL PART NO. M85049/79-11W02
Testing / Inspection Facility
74
435
Number
LF 7441121741 13 PIN PLUG CONNECTOR
Physical Verification needed
Description
LF 7441121741 13 PIN PLUG CONNECTOR
Drg No.D38999/26-W-B-35SA
13 PIN PLUG CONNECTOR AS PER A
MPHENOL PART NO. D38999/26-W-
B-35SA
Specification
7441121741 13 PIN PLUG CONNECTOR
Drg No.D38999/26-W-B-35SA
13 PIN PLUG CONNECTOR AS PER A
MPHENOL PART NO. D38999/26-W-
B-35SA
Drawing no.
7441121741 13 PIN PLUG CONNECTOR Drg No.D38999/26-W-B-35SA 13 PIN PLUG CONNECTOR AS PER A MPHENOL PART NO. D38999/26-W- B-35SA
Testing / Inspection Facility
74
435
Number
7441121740 FISCHER CONNECTORS
Physical Verification needed
Description
FISCHER CONNECTORS MAKE S 104
A092-140 + E3 104.2/5.7 +B19
PIN CONNECTOR.
Specification
FISCHER CONNECTORS MAKE S 104
A092-140 + E3 104.2/5.7 +B19
PIN CONNECTOR.
Testing / Inspection Facility
74
397
Number
FAN ASSY TO 6201071054
Physical Verification needed
Description
FAN ASSY TO DRG NO.172.71.087CBCB
Specification
FAN ASSY TO DRG NO.172.71.087CBCB
Drawing no.
172.71.087CBCB
Testing / Inspection Facility
62
60
Number
LEVER ASSY TO 6206419050
Physical Verification needed
Description
LEVER ASSY TO DRG NO.175.63.047CB
Specification
LEVER ASSY TO DRG NO.175.63.047CB
Testing / Inspection Facility
62
58
Number
MIG WELDING ELECTRODE OK AUTROD 13 12 SIZE DIA 1 POINT 2 MM ROLL MAKE ESAB
Physical Verification needed
Description
MIG WELDING ELECTRODE OK AUTROD 13 12 SIZE DIA 1 POINT 2 MM ROLL MAKE ESAB
Specification
MIG WELDING ELECTRODE OK AUTROD 13 12 SIZE DIA 1 POINT 2 MM ROLL MAKE ESAB
Manufacturing Technology
MIG WELDING ELECTRODE OK AUTROD 13 12 SIZE DIA 1 POINT 2 MM ROLL MAKE ESAB
Testing / Inspection Facility
MIG WELDING ELECTRODE OK AUTROD 13 12 SIZE DIA 1 POINT 2 MM ROLL MAKE ESAB
90
2500 KG
Number
MIG WELDING ELECTRODE OK AUTROD 13 12 SIZE DIA 1 MM ROLL MAKE ESAB
Physical Verification needed
Description
MIG WELDING ELECTRODE OK AUTROD 13 12 SIZE DIA 1 MM ROLL MAKE ESAB
Specification
MIG WELDING ELECTRODE OK AUTROD 13 12 SIZE DIA 1 MM ROLL MAKE ESAB
Manufacturing Technology
MIG WELDING ELECTRODE OK AUTROD 13 12 SIZE DIA 1 MM ROLL MAKE ESAB
Testing / Inspection Facility
MIG WELDING ELECTRODE OK AUTROD 13 12 SIZE DIA 1 MM ROLL MAKE ESAB
90
1380 KG
Number
CABLE ASSY SPECIAL PURPOSE ELECTRICAL 2 CORE ILLUMINATION TRVERSE SCALE 1135 MM LONG TO CAT PT NO M2 BOF 6151669 SHT CAT PART NO M2 5995 001869
Physical Verification needed
Description
CABLE ASSY SPECIAL PURPOSE ELECTRICAL 2 CORE ILLUMINATION TRVERSE SCALE 1135 MM LONG TO CAT PT NO M2 BOF 6151669 SHT CAT PART NO M2 5995 001869
Specification
CABLE ASSY SPECIAL PURPOSE ELECTRICAL 2 CORE ILLUMINATION TRVERSE SCALE 1135 MM LONG TO CAT PT NO M2 BOF 6151669 SHT CAT PART NO M2 5995 001869
Manufacturing Technology
CABLE ASSY SPECIAL PURPOSE ELECTRICAL 2 CORE ILLUMINATION TRVERSE SCALE 1135 MM LONG TO CAT PT NO M2 BOF 6151669 SHT CAT PART NO M2 5995 001869
Testing / Inspection Facility
CABLE ASSY SPECIAL PURPOSE ELECTRICAL 2 CORE ILLUMINATION TRVERSE SCALE 1135 MM LONG TO CAT PT NO M2 BOF 6151669 SHT CAT PART NO M2 5995 001869
90
493
Number
CABLE ASSY SPECIAL PURPOSE ELECTRICAL 3 CORE DRG NO GCF LM 1442 B REF DRG NO 5080664 PT NO M 2 5995 001856
Physical Verification needed
Description
CABLE ASSY SPECIAL PURPOSE ELECTRICAL 3 CORE DRG NO GCF LM 1442 B REF DRG NO 5080664 PT NO M 2 5995 001856
Specification
CABLE ASSY SPECIAL PURPOSE ELECTRICAL 3 CORE DRG NO GCF LM 1442 B REF DRG NO 5080664 PT NO M 2 5995 001856
Manufacturing Technology
CABLE ASSY SPECIAL PURPOSE ELECTRICAL 3 CORE DRG NO GCF LM 1442 B REF DRG NO 5080664 PT NO M 2 5995 001856
Testing / Inspection Facility
CABLE ASSY SPECIAL PURPOSE ELECTRICAL 3 CORE DRG NO GCF LM 1442 B REF DRG NO 5080664 PT NO M 2 5995 001856
90
213
Number
SWITCH BOX MICRO SWITCH ASSY LH 40MM AAL L70 GUN TO PART NO M2 5930 004253
Physical Verification needed
Description
SWITCH BOX MICRO SWITCH ASSY LH 40MM AAL L70 GUN TO PART NO M2 5930 004253
Specification
SWITCH BOX MICRO SWITCH ASSY LH 40MM AAL L70 GUN TO PART NO M2 5930 004253
Manufacturing Technology
SWITCH BOX MICRO SWITCH ASSY LH 40MM AAL L70 GUN TO PART NO M2 5930 004253
Testing / Inspection Facility
SWITCH BOX MICRO SWITCH ASSY LH 40MM AAL L70 GUN TO PART NO M2 5930 004253
90
25
Number
SWITCH SUB ASSY GUN MAIN MOTOR ON OFF TO DRG NO CIL 2983 SA 1 CAT NO M2 5930 003664 TO SPENC CIL PROV 101 C
Physical Verification needed
Description
SWITCH SUB ASSY GUN MAIN MOTOR ON OFF TO DRG NO CIL 2983 SA 1 CAT NO M2 5930 003664 TO SPENC CIL PROV 101 C
Specification
SWITCH SUB ASSY GUN MAIN MOTOR ON OFF TO DRG NO CIL 2983 SA 1 CAT NO M2 5930 003664 TO SPENC CIL PROV 101 C
Manufacturing Technology
SWITCH SUB ASSY GUN MAIN MOTOR ON OFF TO DRG NO CIL 2983 SA 1 CAT NO M2 5930 003664 TO SPENC CIL PROV 101 C
Testing / Inspection Facility
SWITCH SUB ASSY GUN MAIN MOTOR ON OFF TO DRG NO CIL 2983 SA 1 CAT NO M2 5930 003664 TO SPENC CIL PROV 101 C
90
37
Number
SWITCH BOX MICRO SWITCH 5930 004252
Physical Verification needed
Description
SWITCH BOX MICRO SWITCH 5930 004252
Specification
SWITCH BOX MICRO SWITCH 5930 004252
Manufacturing Technology
SWITCH BOX MICRO SWITCH 5930 004252
Testing / Inspection Facility
SWITCH BOX MICRO SWITCH 5930 004252
90
70
Number
SWITCH BOX BATTERY MAIN EEUM DRG NO CIL 3056
Physical Verification needed
Description
SWITCH BOX BATTERY MAIN EEUM DRG NO CIL 3056
Specification
SWITCH BOX BATTERY MAIN EEUM DRG NO CIL 3056
Manufacturing Technology
SWITCH BOX BATTERY MAIN EEUM DRG NO CIL 3056
Testing / Inspection Facility
SWITCH BOX BATTERY MAIN EEUM DRG NO CIL 3056
90
21
Number
FABRICATION OF VARIOUS OPERATION OF JERSEY MENS WOOL V NECK DARK OG ITEM
Physical Verification needed
Description
FABRICATION OF VARIOUS OPERATION OF JERSEY MENS WOOL V NECK DARK OG ITEM
FABRICATION OF VARIOUS OPERATION (200031-KNITTING, 200033-WASHING, 200034-PRESSING, 200035-CUTTING, 200008-TAILOR SKILLED HAND-I, 200001-TAILOR SKILLED MACHINE-I, 200037-SERGING, 200086-ASSIST TO SERGER, 200012-BHM, 200013-BSM, 200038-FINAL PRESS & FOLD ETC.) OF JERSEY MEN'S WOOL 'V' NECK DARK OG, AS PER SPEC. NO. S/5257/2009/TC-12.
Specification
FABRICATION OF VARIOUS OPERATION OF JERSEY MENS WOOL V NECK DARK OG ITEM
FABRICATION OF VARIOUS OPERATION (200031-KNITTING, 200033-WASHING, 200034-PRESSING, 200035-CUTTING, 200008-TAILOR SKILLED HAND-I, 200001-TAILOR SKILLED MACHINE-I, 200037-SERGING, 200086-ASSIST TO SERGER, 200012-BHM, 200013-BSM, 200038-FINAL PRESS & FOLD ETC.) OF JERSEY MEN'S WOOL 'V' NECK DARK OG, AS PER SPEC. NO. S/5257/2009/TC-12.
Manufacturing Technology
AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES
Testing / Inspection Facility
AS PER ATTACHED TESTING/INSPECTION FACILITY FILES
J0
15000
Whole job
3770
107/028/PV(A)/EOI/19-20
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
Name
Code
Quantity
Approx Value
Select
PERIPHERAL COMPONENT FOR 84 MM LWL
Description
PERIPHERAL COMPONENT FOR 84MM LWL
Specification
AS PER DRAWINGS
Testing / Inspection Facility
71
35
Number
Grip Sub Assy for Revolver Side Swing
Description
Grip Sub Assy for Revolver 0.32 Side Swing Drg. No. RV-03/15,16,17 SW.
Specification
Grip Sub Assy for Revolver 0.32 Side Swing Drg. No. RV-03/15,16,17 SW.
Drawing no.
Drg. No. RV-03/15,16,17 SW.
Testing / Inspection Facility
70
2500
Number