Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofbqcvrcell[dot]ofb[at]ofb[dot]gov[dot]in
LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS
Specification
LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS
IS:1461-1984 Second Revision (Reaffirmed-2003) and Supplementary Scheduled no. CQA (GS)/SS/346(b)
Except that: (i) Material shall be polyester.
(ii) Design & Dimensions: As per Drawing Enclosed (Drg. No. OCFAV/Button/002).
(iii) In app. Feel, Finish and all other resp. not defi. in this spec. Button shall confirm to the corres. sealed sample held in the cust. of the contro. customer service centre, OCF Avadi.
FABRIC NYLON 75 GSM OG POLYURETHANE COATED 100 CM WIDE
SPECIFICATION:- APPENDIX 'A' V.NO. 2, AS MENTIONED IN SPECIFICATION NO. JSS:4240-03:2011 & AS PER ANNEXURE 'A'.
Specification
FABRIC NYLON 75 GSM OG POLYURETHANE COATED 100 CM WIDE
SPECIFICATION:- APPENDIX 'A' V.NO. 2, AS MENTIONED IN SPECIFICATION NO. JSS:4240-03:2011 & AS PER ANNEXURE 'A'.
Co-Driver Side Glass with Gun Port Hole with Rubber Beading Drg. No. ST-II/5009-67-31/B
Specification
Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the specification.
Drawing no.
Drg. No. ST-II/5009-67-31/B, VFJ will transmit/ forward the soft copy (password protected pdf file) of Drawing to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the Drawing.
Driver Side Glass with Gun Port Hole with Rubber Beading Drg. No. ST-II/5007-67-31/B
Specification
Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the specification.
Drawing no.
Drg. No. ST-II/5007-67-31/B, VFJ will transmit/ forward the soft copy (password protected pdf file) of Drawing to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the Drawing.
Windshield Glass with Rubber Beading, Drg. No. ST-II/5001-67-31/B
Specification
Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the specification.
Drawing no.
Drg. No. ST-II/5001-67-31/B, VFJ will transmit/ forward the soft copy (password protected pdf file) of Drawing to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the Drawing.
GLASS MOULD FOR PRISM, ALL CHARACTERISTICS AS PER DRAWING NO. OLF/B/7200068/084. GLASS K-108, REFRACTIVE INDEX=1.516373, ABBE VALUE(VD)=64.07. DENSITY OF GLASS=2.52 GM/CC
Drawing no.
OLF/B/7200068/084
Manufacturing Technology
OPTICAL COMPONENT
Testing / Inspection Facility
OPTICAL COMPONENT
99
1132
Number
3927
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY CLOSED END TYPE F DOUBLE PULLER NON LOCK SLIDERS OG 61 CM
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013.
Specification
PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY CLOSED END TYPE F DOUBLE PULLER NON LOCK SLIDERS OG 61 CM
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013.
FASTENER PLASTIC SLIDE MEDIUM DUTY OG 32 CM LONG (CLOSED END ONE WAY WITH NON LOCK SLIDER)
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013
Specification
FASTENER PLASTIC SLIDE MEDIUM DUTY OG 32 CM LONG (CLOSED END ONE WAY WITH NON LOCK SLIDER)
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013
Drawing no.
Manufacturing Technology
AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES
Testing / Inspection Facility
AS PER ATTACHED TESTING / INSPECTION FACILITY FILES
CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020
Specification
CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020
STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T
Specification
STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T
ST SQR.75 MM TO SPECN.BS:3S144:1995(1999)GD S144H LFVD WITH CAL.SILICIDE TREATMENT.INCLUSION RATINGCHART SECONDARY REFINING STEEL AS PER SPECN.IS:4163-82,i.e.THN/THK SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE: 2.0-1.
Specification
ST SQR.75 MM TO SPECN.BS:3S144:1995(1999)GD S144H LFVD WITH CAL.SILICIDE TREATMENT.INCLUSION RATINGCHART SECONDARY REFINING STEEL AS PER SPECN.IS:4163-82,i.e.THN/THK SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE: 2.0-1.
Steel rod 46+0.0/-0.50mm Dia. to specification JSS:9510-06-2012, Rev. No. 3 Code Ref. Bin T3 condition with composition restricted S%-0.010 max. P%-0.015 Max. & (S+P)%-0.022 Max. for MAG 7.62mm Barrel. Testing parameters as per QA I No. QA-1/QA/14 (Appendix Enclosed) (Q. AOD/VOD).
Specification
Steel rod 46+0.0/-0.50mm Dia. to specification JSS:9510-06-2012, Rev. No. 3 Code Ref. Bin T3 condition with composition restricted S%-0.010 max. P%-0.015 Max. & (S+P)%-0.022 Max. for MAG 7.62mm Barrel. Testing parameters as per QA I No. QA-1/QA/14 (Appendix Enclosed) (Q. AOD/VOD).
Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 cm width
Specification:- As per Appendix "A" of Prov. Specification No. IND/TC/4587(d) and amendment no. 1
Specification
Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 cm width
Specification:- As per Appendix "A" of Prov. Specification No. IND/TC/4587(d) and amendment no. 1
All component's passed report provided by firm, as Dimensional reports & Chemical composition report by NABL certified Lab. (Except this load test report also to be passed in case of springs) and Components also to be checked (Dimentional, Chemical, load reports) in Factory on sample basic, clerance should be given after passing of components.
PLASTIC SLIDE FASTNERS MEDIUM HEAVY DUTY OG WITH TWO A/LOCK SLIDER FACING THE TWO OPEN ENDS 87 CM
SPECIFICATION: IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008.PACKING & MARKING : AS PER RELEVENT CLAUSE OF SPECIFICATION
Sampling Plan: As per relevant clause of specification
Specification
PLASTIC SLIDE FASTNERS MEDIUM HEAVY DUTY OG WITH TWO A/LOCK SLIDER FACING THE TWO OPEN ENDS 87 CM
SPECIFICATION: IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008.PACKING & MARKING : AS PER RELEVENT CLAUSE OF SPECIFICATION
Sampling Plan: As per relevant clause of specification
All component's passed report provided by firm, as dimensional reports & chemical composition report by NABL certified Lab. ( Except this Load test report also to be passed in case of springs) and components also to be checked (dimensional, chemical, load reports) in Factory on sample basic, clearance should be given after passing of components.
All component's passed report provided by firm, as dimensional reports & chemical composition report by NABL certified Lab. ( Except this Load test report also to be passed in case of springs) and components also to be checked (dimensional, chemical, load reports) in Factory on sample basic, clearance should be given after passing of components.
Tape Nylon Thin Thick OG OFF Sizes (For Synthetic Web Equipt Improved version pouches Ammn) One set consisting of the following.
1.Tape nylon thick 13MM OG 0.32Mtr
2.Tape nylon thick 25MM OG 0.7325Mtr
3.Tape nylon thick 51MM OG 2.58Mtr
4.Tape nylon 19MM OG 8.3553Mtr
Specification
Specn No. Prov. Specn No. DMSRDE/T&GS/92/403 & JSS:8315-6 For Tape Nylon 19MM OG
Note: Firm will supply the material in set haviong same colour. One bale will consists of not more than 30 KG
9001120370 WIRE-MGSHV-1.0 SQMM
Drg No.RUSSIANSPECN:TY16505437-82
UNSHIELDED MULTISTRAND FLEXIBL
E FIBROUS LAPPED & PVC
INSULATED WIRE MGSHV-1.0 SQMM
(32/0.20) IN BROWN COLOUR
AS PER TY16-505.437-82
Specification
9001120370 WIRE-MGSHV-1.0 SQMM
Drg No.RUSSIANSPECN:TY16505437-82
UNSHIELDED MULTISTRAND FLEXIBL
E FIBROUS LAPPED & PVC
INSULATED WIRE MGSHV-1.0 SQMM
(32/0.20) IN BROWN COLOUR
AS PER TY16-505.437-82
9001121368 CON CIRS THD RP MALE SHRG
CON CIRS THD RP MALE SHRG 20/4
/8 (HARNESS CONNECTOR)
AS PER BEL PART NO. 461573051
014 / OEM PART NO.SHRG20P4ESH8
(AMPHENOL INTERCONNECT PVT. L
TD.
Specification
9001121368 CON CIRS THD RP MALE SHRG
CON CIRS THD RP MALE SHRG 20/4
/8 (HARNESS CONNECTOR)
AS PER BEL PART NO. 461573051
014 / OEM PART NO.SHRG20P4ESH8
(AMPHENOL INTERCONNECT PVT. L
TD.
Drawing no.
9001121368 CON CIRS THD RP MALE SHRG CON CIRS THD RP MALE SHRG 20/4 /8 (HARNESS CONNECTOR) AS PER BEL PART NO. 461573051 014 / OEM PART NO.SHRG20P4ESH8 (AMPHENOL INTERCONNECT PVT. L TD.