ALUMINIUM STRIP 30 +/- 0.5 MM WIDE X 0.5 +/- 0.02 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION : SS-EN-485-2 EN AW 1050A-0 . EACH COIL WEIGHT UPTO 5 KG.
Specification
ALUMINIUM STRIP 30 +/- 0.5 MM WIDE X 0.5 +/- 0.02 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION : SS-EN-485-2 EN AW 1050A-0 . EACH COIL WEIGHT UPTO 5 KG.
ALU. STRIP 20 +/- 0.5 MM WIDE X 0.05 +/- 0.001 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION EN 485-2, AW-1200-H19. EACH COIL WEIGHT UPTO 5KG.
Specification
ALU. STRIP 20 +/- 0.5 MM WIDE X 0.05 +/- 0.001 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION EN 485-2, AW-1200-H19. EACH COIL WEIGHT UPTO 5KG.
ALU. STRIP 20 +/-0.5 MM WIDE X 0.5 +/- 0.01 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION EN 485-2 EN AW1050A (AL 99.5) H24(2). EACH COIL WEIGHT UPTO 5 KG.
Specification
ALU. STRIP 20 +/-0.5 MM WIDE X 0.5 +/- 0.01 MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION EN 485-2 EN AW1050A (AL 99.5) H24(2). EACH COIL WEIGHT UPTO 5 KG.
STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A
Specification
STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A
Drawing no.
STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A
STEEL STRIP 90+/-0.5mm WIDE X 2mm THICK TO SPECN-IS-513-2008(FIFTH REV.)GRD. DD OR EDD IN ANNEALED/SKIN PASSED CONDITIONOR BS-1449 Pt-I GR. 1 OR 2 OR 3 (CR/CS) IN ANNEALED/SKINPASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN(HR/HS) COND.) WITH MAX.UTS-390 MPa IN COIL WEIGHT OF EACH50 TO 100 KG.
Specification
STEEL STRIP 90+/-0.5mm WIDE X 2mm THICK TO SPECN-IS-513-2008(FIFTH REV.)GRD. DD OR EDD IN ANNEALED/SKIN PASSED CONDITIONOR BS-1449 Pt-I GR. 1 OR 2 OR 3 (CR/CS) IN ANNEALED/SKINPASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN(HR/HS) COND.) WITH MAX.UTS-390 MPa IN COIL WEIGHT OF EACH50 TO 100 KG.
STEEL STRIP 12.5 +/- 0.5MM WIDE X 0.28-0.02MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION IS-6911-2017 (2nd REVISION) AMENDMENT NO. 1 & 2 , Gr X04 Cr 19 Ni 9. EACH COIL WEIGHT 5-10 KG
Specification
STEEL STRIP 12.5 +/- 0.5MM WIDE X 0.28-0.02MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION IS-6911-2017 (2nd REVISION) AMENDMENT NO. 1 & 2 , Gr X04 Cr 19 Ni 9. EACH COIL WEIGHT 5-10 KG
STEEL STRIP 15+/-0.5 MM WIDE x1.00-0.08MM THICK IN HAND COILOF LENGTH 4 TO 6 FEET TO SPECN:IS-2062-2006 (SIXTH REVISION)GRADE 'A' DESIGNATION Fe-410-WA.STRIPS SHOULD BE PACKED WITHHASSIAN CLOTH DULY COATED WITH RUST PROOF TO AVOID RUST.
STEEL STRIP 12.5 +/- 0.5MM WIDE X 0.28-0.02MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION IS-6911-2017 (2nd REVISION) AMENDMENT NO. 1 & 2 , Gr X04 Cr 19 Ni 9. EACH COIL WEIGHT 5-10 KG
Specification
STEEL STRIP 12.5 +/- 0.5MM WIDE X 0.28-0.02MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION IS-6911-2017 (2nd REVISION) AMENDMENT NO. 1 & 2 , Gr X04 Cr 19 Ni 9. EACH COIL WEIGHT 5-10 KG
STEEL STRIP 15+/-0.5 MM WIDE x1.00-0.08MM THICK IN HAND COILOF LENGTH 4 TO 6 FEET TO SPECN:IS-2062-2011 (SEVENTH REVISION) GRADE 'A' DESIGNATION E-250(Fe-410-WA).STRIPS SHOULD BE PACKED WITH HASSIAN CLOTH DULY COATED WITH RUST PROOF TO AVOID RUST.
Specification
STEEL STRIP 15+/-0.5 MM WIDE x1.00-0.08MM THICK IN HAND COILOF LENGTH 4 TO 6 FEET TO SPECN:IS-2062-2011 (SEVENTH REVISION) GRADE 'A' DESIGNATION E-250(Fe-410-WA).STRIPS SHOULD BE PACKED WITH HASSIAN CLOTH DULY COATED WITH RUST PROOF TO AVOID RUST.
ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN
Specification
ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN
COPPER STRIP 16+/-0.2 X 0.32+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BSEN 1652:1998,MATL SYMBOL Cu-ETPMATL CONDN R-220.MATERIAL MUST BE HOMOGENEOUS, FREE FROMBURRS, BOWINESS (MAX) 2MM/MTR.COIL WT.8-10KG. ID WITH NYLONRING 300MM MIN.& MUST BE SMOOTH,CLEANED & PACKED PROPERLY TOAVOID DAMAGE. MATERIAL WOULD BE ACCEPETED BASED ON LAB TESTAND MACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.
Specification
COPPER STRIP 16+/-0.2 X 0.32+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BSEN 1652:1998,MATL SYMBOL Cu-ETPMATL CONDN R-220.MATERIAL MUST BE HOMOGENEOUS, FREE FROMBURRS, BOWINESS (MAX) 2MM/MTR.COIL WT.8-10KG. ID WITH NYLONRING 300MM MIN.& MUST BE SMOOTH,CLEANED & PACKED PROPERLY TOAVOID DAMAGE. MATERIAL WOULD BE ACCEPETED BASED ON LAB TESTAND MACHINING TRIAL ON PROGRESSIVE POWER PRESS AT OFK.
STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2014)(1st REVESION)GRADE-14C14S14 IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)(1st Rev) SURFACE COND.OF MATERIAL SHOULDBE AS PER IS:9550-2001 (REAFFIRMED 2015) (1st REVESION).
Specification
STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2014)(1st REVESION)GRADE-14C14S14 IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)(1st Rev) SURFACE COND.OF MATERIAL SHOULDBE AS PER IS:9550-2001 (REAFFIRMED 2015) (1st REVESION).
ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.
Specification
ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.
Drawing no.
ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.
COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDNOT BE MORE THAN 25 KGS.
Specification
COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDNOT BE MORE THAN 25 KGS.
ALUMINIUM ALLOY ROD 7.00(+/-0.05)MM DIA IN STRAIGTH LENGTH OF 2.5 TO 3 METRES TO SPECN.IS:733-1983 DESIGNATION 64430CONDITION "WP" OR IS:733-1983 DESIGNATION 24345 "W" WITHMAXIMUM ALLOWABLE PERIPHERIAL GRAIN GROWTH ON EXTRUDEDSECTION - 5% OF THE NOMINAL DIMENTION ALL OVER (REFRENCE:CLAUSE 4.2 OF IS:733-1983).
Specification
ALUMINIUM ALLOY ROD 7.00(+/-0.05)MM DIA IN STRAIGTH LENGTH OF 2.5 TO 3 METRES TO SPECN.IS:733-1983 DESIGNATION 64430CONDITION "WP" OR IS:733-1983 DESIGNATION 24345 "W" WITHMAXIMUM ALLOWABLE PERIPHERIAL GRAIN GROWTH ON EXTRUDEDSECTION - 5% OF THE NOMINAL DIMENTION ALL OVER (REFRENCE:CLAUSE 4.2 OF IS:733-1983).
Drawing no.
ALUMINIUM ALLOY ROD 7.00(+/-0.05)MM DIA IN STRAIGTH LENGTH OF 2.5 TO 3 METRES TO SPECN.IS:733-1983 DESIGNATION 64430CONDITION "WP" OR IS:733-1983 DESIGNATION 24345 "W" WITHMAXIMUM ALLOWABLE PERIPHERIAL GRAIN GROWTH ON EXTRUDEDSECTION - 5% OF THE NOMI
BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN WEIGHT OF 10 TO 15 KG EACH COIL.
Specification
BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN WEIGHT OF 10 TO 15 KG EACH COIL.
Drawing no.
BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 150mm Max) IN
ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN
Specification
ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN
BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED).
STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLOSED ).
Specification
STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLOSED ).
Drawing no.
STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLO
STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MATERIAL SHOULD BE FREE FROM CRACKS,FLAWS,ROLLING,LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK DETECTION BYULTRASONIC METHOD.BOTH HARDENED END OF EACH ROD SHOULD BEPARTED,SQUARED AND CHAMFERED OF 3MM X 45 DEG. CIRCULAROVALITY 0.020MM MAXIMUM.ALL RODS ARE TO BE STRAIGHT.
Specification
STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MATERIAL SHOULD BE FREE FROM CRACKS,FLAWS,ROLLING,LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK DETECTION BYULTRASONIC METHOD.BOTH HARDENED END OF EACH ROD SHOULD BEPARTED,SQUARED AND CHAMFERED OF 3MM X 45 DEG. CIRCULAROVALITY 0.020MM MAXIMUM.ALL RODS ARE TO BE STRAIGHT.
Drawing no.
AS PER ITEM DESCRIPTION.
Manufacturing Technology
1. Electric Arc Furnace/other suitable furnace
2. Degassing unit
3. Refining Furnace
4. Continuous casting m/c
5. De-Scaler m/c.
6. Rolling mill
7. Carbon oxygen manipulator
STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE TO DIAMETER
Specification
STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE TO DIAMETER
STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE
ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE IN DIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016).
Specification
ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE IN DIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016).
Drawing no.
ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE IN DIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
Specification
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
Drawing no.
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
Specification
BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
Drawing no.
BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
Specification
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510-06-2012 CODE REF .B. T - I COND. WITH COMPOSITION N RESTRICTION S%=0.01 MAX., P%=0.015MAX & (S+P)%=0.022MAX. ANNEXURE NO. 7158/DDO/LMG 5.56MM BARREL FOR TESTING PARA ENCLOSED., QUALITY AOD/VOD.
BLACK POWDER KZDP-2 AS PER SPECIFICATION GOST 1028-79 FOR LIGHTER ASSY.DRG.NO.4Zh63.050CB OF 125MM FSAPDS(AMK-339)ANDQAP No.F3/MANGO PROJECT/21-22 DATE 04/12/2021.
Specification
BLACK POWDER KZDP-2 AS PER SPECIFICATION GOST 1028-79 FOR LIGHTER ASSY.DRG.NO.4Zh63.050CB OF 125MM FSAPDS(AMK-339)ANDQAP No.F3/MANGO PROJECT/21-22 DATE 04/12/2021.
BLACK POWDER DRP-2 AS PER SPECIFICATION GOST 1028-79 FOR LIGHTER ASSY.DRG.NO.4Zh63.100CB OF 125MM FSAPDS(AMK-339)AND QAP No.F3/MANGO PROJECT/21-22 DATE 04/12/2021.
Specification
BLACK POWDER DRP-2 AS PER SPECIFICATION GOST 1028-79 FOR LIGHTER ASSY.DRG.NO.4Zh63.100CB OF 125MM FSAPDS(AMK-339)AND QAP No.F3/MANGO PROJECT/21-22 DATE 04/12/2021.
ZIRCONIUM METAL POWDER TYPE- A PYROTECHNICAL WITH ACTIVE ZIRCONIUM CONTENT 90.0% MIN, MEAN PARTICLE DIA 3 MICRON TO SPECN: AB BOFORS REG- 34 83:36 8/9 DT. 1/11/63, (1) APPEARANCE - GREY BLACK OR BLACK POWDER FREE OF MECHANICAL IMPURITIES (2) CONT. OF HYDROGEN: MAX 0.5% (3) MOISTURE CONTENT: MAX 0.5% (4) SPECIFIC SURFACE TO AIR PERMEABILITY METHOD ACCORDING TO FISHER SUB SIEVE MIN. 20000 SQUARE CENTIMETER/CUBIC CENTIMETER, DRY POWDER OR WETTED IN ACETONE.
Specification
ZIRCONIUM METAL POWDER TYPE- A PYROTECHNICAL WITH ACTIVE ZIRCONIUM CONTENT 90.0% MIN, MEAN PARTICLE DIA 3 MICRON TO SPECN: AB BOFORS REG- 34 83:36 8/9 DT. 1/11/63, (1) APPEARANCE - GREY BLACK OR BLACK POWDER FREE OF MECHANICAL IMPURITIES (2) CONT. OF HYDROGEN: MAX 0.5% (3) MOISTURE CONTENT: MAX 0.5% (4) SPECIFIC SURFACE TO AIR PERMEABILITY METHOD ACCORDING TO FISHER SUB SIEVE MIN. 20000 SQUARE CENTIMETER/CUBIC CENTIMETER, DRY POWDER OR WETTED IN ACETONE.
COTTON FABRIC PERCALE A-85 BROWN SHEETING WITH FINISHING OZ-OP AS PER SPECIFICATION GOST 12125-66 D=105 (PLUS/MINUS) 5 AND QAP NO. F-3/MANGO PROJECT/21-22, DT 27/11/2021.
Specification
COTTON FABRIC PERCALE A-85 BROWN SHEETING WITH FINISHING OZ-OP AS PER SPECIFICATION GOST 12125-66 D=105 (PLUS/MINUS) 5 AND QAP NO. F-3/MANGO PROJECT/21-22, DT 27/11/2021.
CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
Specification
CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
Drawing no.
CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
Specification
PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
CONFIGURATION OF ONE STACK:04 X ARMOUR PLATES 75 MM IN ACCORDACE WITH SPECIFICATION MIL-A-12560, CLASS 1 OR 3,HARDNESS HB 269-311, SIZE: 330X500 MM & 13 X ARMOUR PLATES,30 MM IN ACCORDACE WITH SPECIFICATION MIL-A-12560, CLASS 2,HARDNESS HB 277-321, SIZE: 330X500 MM.
Specification
CONFIGURATION OF ONE STACK:04 X ARMOUR PLATES 75 MM IN ACCORDACE WITH SPECIFICATION MIL-A-12560, CLASS 1 OR 3,HARDNESS HB 269-311, SIZE: 330X500 MM & 13 X ARMOUR PLATES,30 MM IN ACCORDACE WITH SPECIFICATION MIL-A-12560, CLASS 2,HARDNESS HB 277-321, SIZE: 330X500 MM.
