2561
O113-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
det and cal plate assembly
Physical Verification needed
Description
det and cal plate assembly
Specification
As per specification
Testing / Inspection Facility
74
129
Number
2562
HVF/TE0102190209/2019-20/TA/CBOI/SD-OTE dt 03/02/2020
Heavy Vehicle Factory
The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
BODY TO 3801210185
Physical Verification needed
Description
BODY
188.10.181/C
3801210185
Specification
188.10.181/C
Testing / Inspection Facility
38
32
Number
PORT HOLE TO 3801210263
Physical Verification needed
Description
PORT HOLE
187.10.241/C
3801210263
Specification
187.10.241/C
Testing / Inspection Facility
38
50
Number
capacitor pack and TM assy
Physical Verification needed
Description
capacitor pack and TM assy
Specification
capacitor pack and TM assy
Testing / Inspection Facility
74
129
Number
filter bracket assy
Physical Verification needed
Description
filter bracket assy
Specification
As per Specification
Testing / Inspection Facility
74
129
Number
2563
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
Rivet Top Cover Bracket OOW50BMG as per Drg No 5152980 of M2HB Gun
Physical Verification needed
Description
Rivet, Top Cover Bracket, OOW50BMG as per Drg. No. 5152980 of M2HB Gun
Specification
Rivet, Top Cover Bracket, OOW50BMG as per Drg. No. 5152980 of M2HB Gun
Drawing no.
OOW50BMG as per Drg. No. 5152980 of M2HB Gun
Testing / Inspection Facility
74
332
Number
Rivet Solid OOW50BMG as per Drg No 5009282 of M2HB Gun
Physical Verification needed
Description
Rivet, Solid, OOW50BMG as per Drg. No. 5009282 of M2HB Gun
Specification
Rivet, Solid, OOW50BMG as per Drg. No. 5009282 of M2HB Gun
Drawing no.
OOW50BMG as per Drg. No. 5009282 of M2HB Gun
Testing / Inspection Facility
74
498
Number
Solid Lower Trunnion Rivet OOW50BMG as per Drg No 5009799 of M2HB Gun
Physical Verification needed
Description
Solid Lower Trunnion Rivet, OOW50BMG as per Drg. No. 5009799 of M2HB Gun
Specification
Solid Lower Trunnion Rivet, OOW50BMG as per Drg. No. 5009799 of M2HB Gun
Drawing no.
OOW50BMG as per Drg. No. 5009799 of M2HB Gun
Testing / Inspection Facility
74
2988
Number
Rivet Bolt Latch Bracket OOW50BMG as per Drg No 5013522 of M2HB Gun
Physical Verification needed
Description
Rivet, Bolt Latch Bracket, OOW50BMG as per Drg. No. 5013522 of M2HB Gun
Specification
Rivet, Bolt Latch Bracket, OOW50BMG as per Drg. No. 5013522 of M2HB Gun
Drawing no.
OOW50BMG as per Drg. No. 5013522 of M2HB Gun
Testing / Inspection Facility
74
830
Number
Rivet Solid OOW50BMG as per Drg No 5009292 of M2HB Gun
Physical Verification needed
Description
Rivet, Solid, OOW50BMG as per Drg. No. 5009292 of M2HB Gun
Specification
Rivet, Solid, OOW50BMG as per Drg. No. 5009292 of M2HB Gun
Drawing no.
OOW50BMG as per Drg. No. 5009292 of M2HB Gun
Testing / Inspection Facility
74
996
Number
Rivet Main Trunnion OOW50BMG as per Drg No 5013558 of M2HB Gun
Physical Verification needed
Description
Rivet, Main Trunnion, OOW50BMG as per Drg. No. 5013558 of M2HB Gun
Specification
Rivet, Main Trunnion, OOW50BMG as per Drg. No. 5013558 of M2HB Gun
Drawing no.
OOW50BMG as per Drg. No. 5013558 of M2HB Gun
Testing / Inspection Facility
74
664
Number
Rivet Top and Bottom plate OOW50BMG as per Drg No 5009387 of M2HB Gun
Physical Verification needed
Description
Rivet, Top & Bottom plate, OOW50BMG as per Drg. No. 5009387 of M2HB Gun
Specification
Rivet, Top & Bottom plate, OOW50BMG as per Drg. No. 5009387 of M2HB Gun
Drawing no.
OOW50BMG as per Drg. No. 5009387 of M2HB Gun
Testing / Inspection Facility
74
5644
Number
Rivet Belt Holding Pawl Bracket OOW50BMG as per Drg No 7266329 of M2HB Gun
Physical Verification needed
Description
Rivet, Belt Holding Pawl Bracket, OOW50BMG as per Drg. No. 7266329 of M2HB Gun
Specification
Rivet, Belt Holding Pawl Bracket, OOW50BMG as per Drg. No. 7266329 of M2HB Gun
Drawing no.
OOW50BMG as per Drg. No. 7266329 of M2HB Gun
Testing / Inspection Facility
74
1992
Number
Pawl Assembly Belt Holding
Physical Verification needed
Description
Pawl Assembly, Belt Holding, OOW50BMG as per Drawing No.: 7313083 of M2HB GUN
Specification
Pawl Assembly, Belt Holding, OOW50BMG as per Drawing No.: 7313083 of M2HB GUN
Drawing no.
7313083 of M2HB GUN
Testing / Inspection Facility
74
166
Number
ROD CLEANING SMALL ARMS DRG NO 30T 1700 021 B3 FOR 40mm MGL
Physical Verification needed
Description
ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL
Specification
AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL
Drawing no.
30T 1700 021 B3
Testing / Inspection Facility
70
326
Number
2564
OLF/MM-2/T-1906010031
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
7440208460 P16 KNOB POTENTIOMETER 100KOHM
Physical Verification needed
Description
7440208460 P16 KNOB POTENTIOMETER 100KOHM Drg No.PART NO.:P16NP104KAB15 P16 KNOB POTENTIOMETER 100K OH M, TOLERANCE +/-10%, 1 WATT, MAKE:VISHAY SFERNICE, PART NO. :P16NP104KAB15
Specification
7440208460 P16 KNOB POTENTIOMETER 100KOHM Drg No.PART NO.:P16NP104KAB15 P16 KNOB POTENTIOMETER 100K OH M, TOLERANCE +/-10%, 1 WATT, MAKE:VISHAY SFERNICE, PART NO. :P16NP104KAB15
Drawing no.
7440208460 P16 KNOB POTENTIOMETER 100KOHM Drg No.PART NO.:P16NP104KAB15 P16 KNOB POTENTIOMETER 100K OH M, TOLERANCE +/-10%, 1 WATT, MAKE:VISHAY SFERNICE, PART NO. :P16NP104KAB15
Testing / Inspection Facility
74
1009
Number
Cocking mechanism Assy as per Drg No080777A 00 for stand weapon Assy of SRCG
Physical Verification needed
Description
Cocking mechanism Assy as per Drg No080777A 00 for stand weapon Assy of SRCG
Specification
Cocking mechanism Assy as per Drg No080777A 00 for stand weapon Assy of SRCG
Testing / Inspection Facility
74
2
Number
Solenoid Shot Assy as per Drg No Y18884A 00 for stand weapon Assy of SRCG
Physical Verification needed
Description
Solenoid Shot Assy as per Drg No.Y18884A-00 for stand weapon Assy of SRCG
Specification
Solenoid Shot Assy as per Drg No.Y18884A-00 for stand weapon Assy of SRCG
Manufacturing Technology
AS PER SPECIFICATION MONITORING INSTRUCTION
Testing / Inspection Facility
74
2
Number
STOPPING BRAKE HOUSING RIGHT HAND
Description
STOPPING BRAKE HOUSING RIGHT HAND
Specification
STOPPING BRAKE HOUSING RIGHT HAND
Testing / Inspection Facility
62
283
Number
STOPPING BRAKE HOUSING LEFT HAND
Physical Verification needed
Description
STOPPING BRAKE HOUSING LEFT HAND
Specification
STOPPING BRAKE HOUSING LEFT HAND
Testing / Inspection Facility
62
209
Number
UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA
Physical Verification needed
Description
UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA
Specification
UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA
Testing / Inspection Facility
70
625
Number
MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
Physical Verification needed
Description
MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
Specification
MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
Testing / Inspection Facility
70
630
Number
L F 7441121478 RUGGED LCD DISPLAY ASSEMBLY
Physical Verification needed
Description
RUGGED 6.5" LCD DISPLAY ASSEMBLY (L. F. 7441121478), AS PER SPEC. NO. CDR TI (MK-II) T-72/EL/DISPLAY ASSY/05
Specification
RUGGED 6.5" LCD DISPLAY ASSEMBLY (L. F. 7441121478), AS PER SPEC. NO. CDR TI (MK-II) T-72/EL/DISPLAY ASSY/05
Drawing no.
RUGGED 6.5" LCD DISPLAY ASSEMBLY (L. F. 7441121478), AS PER SPEC. NO. CDR TI (MK-II) T-72/EL/DISPLAY ASSY/05
Testing / Inspection Facility
74
81
Number
2565
107/028/PV(A)/EOI/19-20
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
Name
Code
Quantity
Approx Value
Select
FABRICATION OF PINION TO DRG NO 9A 621 06 009 FROM PINION FORGING TO DRG NO F 2296
Physical Verification needed
Description
FABRICATION OF PINION TO DRG NO. 9A-621.06.009 FROM PINION FORGING TO DRG NO F-2296
Specification
FABRICATION OF PINION TO DRG NO. 9A-621.06.009 FROM PINION FORGING TO DRG NO F-2296
Testing / Inspection Facility
91
55
Number
Assembly Carrying Handle OOW50BMG as per drawing no 10208111 of M2HB GUN
Physical Verification needed
Description
Assembly Carrying Handle, OOW50BMG as per drawing no.: 10208111 of M2HB GUN
Specification
Assembly Carrying Handle, OOW50BMG as per drawing no.: 10208111 of M2HB GUN
Drawing no.
10208111 of M2HB GUN
Manufacturing Technology
Firm should have suitable infrastructure, manufacturing, inspection and testing facility to manufacture this item. Manufacturing facilities includes machines, capacity, trained manpower etc for the manufacturing of the subjected item(s). The firm should have manufacturing facilities like, CNC turning, milling and heat treatment facilities to meet the manufacturing requirements as applicable. OFT may carry out capacity verification of Bidder(s), if felt necessary.
Testing / Inspection Facility
Testing and inspection facilities: The firm should have CMM/UMM, Height Gauge, Profile Projector to meet the dimensional inspection of components as applicable. Firm must submit documentary proof to substantiate the same.
74
50
Number
STOP ASSEMBLY CARTRIDGE OOW50BMG as per drawing no 5577409 of M2HB GUN
Physical Verification needed
Description
STOP ASSEMBLY, CARTRIDGE, OOW50BMG as per drawing no.: 5577409 OF M2HB GUN
Specification
STOP ASSEMBLY, CARTRIDGE, OOW50BMG as per drawing no.: 5577409 OF M2HB GUN
Drawing no.
5577409 OF M2HB GUN
Manufacturing Technology
Firm should have suitable infrastructure, manufacturing, inspection and testing facility to manufacture this item. Manufacturing facilities includes machines, capacity, trained manpower etc for the manufacturing of the subjected item(s). The firm should have manufacturing facilities like, CNC turning, milling and heat treatment facilities to meet the manufacturing requirements as applicable. OFT may carry out capacity verification of Bidder(s), if felt necessary.
Testing / Inspection Facility
Testing and inspection facilities: The firm should have CMM/UMM, Height Gauge, Profile Projector to meet the dimensional inspection of components as applicable. Firm must submit documentary proof to substantiate the same.
74
50
Number
2566
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
PISTON ROD TO DRG NO 4024497
Physical Verification needed
Description
PISTON ROD TO DRG.NO.4024497.
Specification
PISTON ROD TO DRG.NO.4024497.
Testing / Inspection Facility
90
60
Number
2567
3193000956
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
STEEL FL 50X25MM
Description
STEEL FL.50X25MM TO IS:5517-1993 GD-40 NI6CR4MO3.
Specification
STEEL FL.50X25MM TO IS:5517-1993 GD-40 NI6CR4MO3.
Manufacturing Technology
Raw Material
(as per specification)
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant specification.
04
744
Kilogram
Plunger Wheel Lock for JVPC 5 56X30 MM DRG No 0204 03 04 02 14 019 00DA MIM Route
Physical Verification needed
Description
Plunger Wheel Lock for JVPC 5 56X30 MM DRG No 0204 03 04 02 14 019 00DA MIM Route
Specification
Plunger Wheel Lock for JVPC 5 56X30 MM DRG No 0204 03 04 02 14 019 00DA MIM Route
Drawing no.
DRG No 0204 03 04 02 14 019 00DA MIM Route
Testing / Inspection Facility
1-Chemical and mechanical properties as per std. given drawing.
2- Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
573
Number
Stopper Rear Spring Recoil for JVPC 556 MM Through MIM Route DRG No 0204 03 04 00 06 005 00DA
Physical Verification needed
Description
Stopper Rear Spring Recoil for JVPC 556 MM Through MIM Route DRG No 0204 03 04 00 06 005 00DA
Specification
Stopper Rear Spring Recoil for JVPC 556 MM Through MIM Route DRG No 0204 03 04 00 06 005 00DA
Drawing no.
DRG No 0204 03 04 00 06 005 00DA
Testing / Inspection Facility
1-Chemical and mechanical properties as per std. given drawing.
2- Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
502
Number
9069111239 COIL SOLENOID 1500 TURNS30 OHMS PLASTIC EPOXY MOULDED 39 5 MM O D DIA 24 MM LONG TO PT NO M2 5945 001642 DRG NO M2 BOF5074935
Physical Verification needed
Description
9069111239 COIL SOLENOID 1500 TURNS30 OHMS PLASTIC EPOXY MOULDED 39 5 MM O D DIA 24 MM LONG TO PT NO M2 5945 001642 DRG NO M2 BOF5074935
Specification
9069111239 COIL SOLENOID 1500 TURNS30 OHMS PLASTIC EPOXY MOULDED 39 5 MM O D DIA 24 MM LONG TO PT NO M2 5945 001642 DRG NO M2 BOF5074935
Manufacturing Technology
coil solenoid 1500 turns 30 ohms plastic moulded
Testing / Inspection Facility
coil solenoid 1500 turns 30 ohms plastic moulded
90
512
Number
MAGAZINE ASSY SS FOR ASHANI MK III IN FC AS PER DRG NO CTM 192
Physical Verification needed
Description
MAGAZINE ASSY SS FOR ASHANI MK III IN FC AS PER DRG NO CTM-192
Specification
MAGAZINE ASSY (SS) FOR ASHANI MK III IN F/C AS PER DRG NO CTM-192
Testing / Inspection Facility
70
12000
Number
HOUSING ARMATURE SOFT IRON 50 M 00 d DIA 9MM THICK TO DRG NO 5047925
Physical Verification needed
Description
HOUSING ARMATURE SOFT IRON 50 M 00/d,DIA 9MM THICK TO DRG.NO. 5047925
Specification
HOUSING ARMATURE SOFT IRON 50 M 00/d,DIA 9MM THICK TO DRG.NO. 5047925
Testing / Inspection Facility
90
106
Number
2568
110190301
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
Tape Nylon 25point4 mm UD 403 KGF 3952 N V No 3
Description
Tape Nylon 25.4 mm U/D (403 KGF) 3952-N (V.No.3)
Specification
Specification No. JSS:8315-6.
Manufacturing Technology
As per drawing/specification
Testing / Inspection Facility
As per drawing/specification
2103784279
76
Metre
TAPE NYLON TUBULAR 26 plus minus 1 MM BS 1850KG ORANGE
Description
TAPE NYLON TUBULAR 26+-1 MM. BS : 1850KG ORANGE
Specification
Updated specification No. ADRDE/Specn/2000/54(e) received vide ADRDE, Agra letter No.ADRDE/QMS/TG(TE)/24 dtd. 30/07/2021.
Manufacturing Technology
As per specification/drawing
Testing / Inspection Facility
As per specification/drawing
2101777062
236
Metre
Tape Nylon 66 26mm BS 700 KG Orange
Description
Tape Nylon 66 26mm BS 700 KG Orange
Specification
SPECN NO.ADRDE/SPECN/65(a)
Manufacturing Technology
As per specification/drawing
Testing / Inspection Facility
As per specification/drawing
2101777071
262
Metre
FABRIC NYLON 58 GM UD 105 CM MIN WIDTH EXCLUDING SELVEDGE
Description
FABRIC NYLON 58 GM U/D 105 CM MIN. WIDTH EXCLUDING SELVEDGE
Specification
SPECN NO. AS PER TECH. PARTICULARS
(a) MASS/SQ MET : 58 GM (MAX)
(b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN)
(C) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN)
(d) AIR POROSITY : 7-10 CU.FT/SQ.FT/SEC.
(e) THICKNESS:0.11M, MAX AT A PRESSUE OF 200GM/SQCM.
(f) WIDTH : 105CM MIN. WIDTH EXCLUDING SELVEDGE
(g) YARN LENIER DENSITY, BOTHWAYS : 45 DENIER (Nominal)
(h) TWIST OF YARN : WARP:200 TPM, WEFT: 150TPM
(i) THREAD DENSITY, BOTHWAYS :48-50/CM.
(j) WEAVE:2/1 TWILL
NOTE -THERE SHOULD NOT BE ANY TYPE OF YARN DISTORTION/SLIPPAG
Manufacturing Technology
As per specification/drawing
Testing / Inspection Facility
As per specification/drawing
2101221384
7030
Metre
Tape Textile Nylon 44 mm Un Dyed 705 KGF 6915 N V No 6
Description
Tape Textile Nylon 44 mm Un Dyed (705 KGF) 6915-N (V. No. 6)
Specification
Specification – IS : 4228-1979
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2103784278
575
Metre
Quick Release Unit for PP BMK41
Description
Quick Release Unit
Specification
ADRDE/1369(a)
DRD/26/98 EXCEPT THAT: - Dimensions of Central Pin
SN- For Read
(i) Dimension: 56.5 (Sheet No. 3 of 9) – Dimension: 52.1
(ii) Dimension: 53 (Sheet No. 3 of 9) – Dimension: 48.6
(iii) Dimension: 08 (Sheet No. 3 of 9) – Dimension: 6.4
Manufacturing Technology
As per drawing/specification
Testing / Inspection Facility
As per drawing/specification
2110071035
385
Number
Section Multipurpose Packing Frame
Description
Section Multipurpose Packing Frame
Specification
SPECN – ADRDE/1.6.01.04-26
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per Specification/drawing
2110090003
152
Number
Rip Cord Assembly for BMK41
Description
Rip Cord Assembly
Specification
ADRDE/1323(f)
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per Specification/drawing
2110071032
47
Number
Quick Release Connecting Lug Male for PP BMK41
Description
Quick Release Connecting Lug (Male)
Specification
DRAWING NO.: ADRDE/797(e) SHEET NO. 8.
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2110064000
152
Number
CABLE ASSY WNH3A
Physical Verification needed
Description
CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG
Specification
CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG
Testing / Inspection Facility
74
33
Number
CABLE ASSY AMMO SESNOR
Physical Verification needed
Description
CABLE ASSY, AMMO SESNOR (VIEW) AS PER DRG NO. Y18877A-00 FOR MAGAZINE ASSY OF SRCG
Specification
CABLE ASSY, AMMO SESNOR (VIEW) AS PER DRG NO. Y18877A-00 FOR MAGAZINE ASSY OF SRCG
Testing / Inspection Facility
74
34
Number
set of O ring LRF
Physical Verification needed
Description
set of O ring LRF
Specification
As per specification scope of work
Testing / Inspection Facility
As per specification scope of work
74
129
Number
Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route
Description
Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route
Specification
Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route
Drawing no.
0204 03 04 02 14 005 00DA MIM Route
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
600
Number
Trigger Rear for JVPC 5 56 30MM To Drg No 0204 03 04 02 14 009 00DA MIM Route
Physical Verification needed
Description
Trigger Rear for JVPC 5.56x30MM To Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)
Specification
Trigger Rear for JVPC 5.56x30MM To Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)
Drawing no.
Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
700
Number
Catch Magazine for JVPC 5 56 30MM 0204 03 04 02 14 014 00DA MIM Route
Physical Verification needed
Description
Catch Magazine for JVPC 5.56x30MM 0204-03-04-02-14-014-00DA (MIM Route)
Specification
Catch Magazine for JVPC 5.56x30MM 0204-03-04-02-14-014-00DA (MIM Route)
Drawing no.
0204-03-04-02-14-014-00DA (MIM Route)
Testing / Inspection Facility
1-Chemical and mechanical properties as per std. given drawing.
2- Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
600
Number
ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D LF 7440200208
Physical Verification needed
Description
ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)
Specification
ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)
Drawing no.
ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D LF 7440200208
Testing / Inspection Facility
74
63
Number
Webbing Nylon Tubular 14 mm Undyed BS 1100 Kg for BP Mirage
Description
Webbing Nylon Tubular 14 mm Undyed (BS 1100 Kg)
Specification
ADRDE/Specn/1983/11(d).
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101877323
148764
Metre
9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF MN 5501 C REF DRG NO 5360 040480
Physical Verification needed
Description
9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN 5501(C ) REF.DRG NO. 5360-040480
Specification
9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN 5501(C ) REF.DRG NO. 5360-040480
Manufacturing Technology
As per QAP & TE documents.
Testing / Inspection Facility
As per QAP & TE documents
90
34
Number
9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF MN 5502 C REF DRG NO 5360 040481
Physical Verification needed
Description
9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN-5502(C) (REF.DRG NO (5360-040481)
Specification
9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN-5502(C) (REF.DRG NO (5360-040481)
Testing / Inspection Facility
90
34
Number
RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330 023797
Physical Verification needed
Description
RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330-023797
Specification
RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330-023797
Testing / Inspection Facility
90
179
Number
Overhauling of Firing Mechanism Assy to Drg No 2A46 Cd10 20 Cb with replace old contactor and Electromagnet with new one
Physical Verification needed
Description
overhauling of firing mechanism Assy to Drg No 2A46-Cd10-20 cb with replace old contactor & electromagnet with new one (item code-9073001198)
Specification
overhauling of firing mechanism Assy to Drg No 2A46-Cd10-20 cb with replace old contactor & electromagnet with new one (item code-9073001198)
Testing / Inspection Facility
90
18
Number
2569
ORDFYS/FGK/PV-19/ADV-45
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264
Physical Verification needed
Description
NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264
Specification
NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264
Testing / Inspection Facility
41
36
Number
SEAR FOR JVPC 5 56 MM
Description
Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA.
Specification
Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA.
Drawing no.
DRG No.0204-03-04-02-14-010-00DA.
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
800
Number
ST FLAT 70X34MM IN HOT ROLLED and ANNEALED CONDITION
Description
ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN
Specification
ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN
Testing / Inspection Facility
01
1481
Kilogram
STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C
Description
STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)
Specification
STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)
Testing / Inspection Facility
03
820
Kilogram
CABLE ASSY WPKS12B
Physical Verification needed
Description
CABLE ASSY WPKS12B (VIEW) AS PER DGR NO.Y18506A-00 FOR TRAVERSE ASSY OF SRCG
Specification
CABLE ASSY WPKS12B (VIEW) AS PER DGR NO.Y18506A-00 FOR TRAVERSE ASSY OF SRCG
Testing / Inspection Facility
74
34
Number
CABLE ASSY WSS3
Physical Verification needed
Description
CABLE ASSY WSS3 (VIEW) AS PER DGR NO.Y18509A-00 FOR STAND ASSY OF SRCG
Specification
CABLE ASSY WSS3 (VIEW) AS PER DGR NO.Y18509A-00 FOR STAND ASSY OF SRCG
Testing / Inspection Facility
74
33
Number
FORGING BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG NO 6528254 FORGE
Physical Verification needed
Description
FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE
Specification
FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE
Testing / Inspection Facility
74
591
Number
PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670
Physical Verification needed
Description
PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
Specification
PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
Testing / Inspection Facility
74
591
Number
PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672
Physical Verification needed
Description
PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
Specification
PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
Testing / Inspection Facility
74
591
Number
for collaboration co production of holographic sight with BDC reticle
Physical Verification needed
Description
for collaboration co production of holographic sight with BDC reticle
Specification
for collaboration co production of holographic sight with BDC reticle
Testing / Inspection Facility
74
1
Number
GEAR AS PER DRAWING NO AL6 373 039 LF7440208431
Physical Verification needed
Description
GEAR AS PER DRAWING NO AL6 373 039 LF7440208431
Specification
GEAR AS PER DRAWING NO AL6 373 039
Drawing no.
DRAWING NO AL6.373.039
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
GEAR AS PER DRAWING NO AL6 373 038 LF7440208430
Physical Verification needed
Description
GEAR AS PER DRAWING NO.AL.6.373.038 LF7440208430
Specification
GEAR AS PER DRAWING NO.AL.6.373.038
Drawing no.
DRAWING NO.AL.6.373.038
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
LEVER AS PER DRAWING NO AL6 354 344 LF 7440208429
Physical Verification needed
Description
LEVER AS PER DRAWING NO AL6 354 344 LF 7440208429
Specification
LEVER AS PER DRAWING NO.AL.6.354.344
Drawing no.
DRAWING NO.AL.6.354.344
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
ARRESTER HANDLE AS PER DRAWING NO AL6 354 342 LF7440208428
Physical Verification needed
Description
ARRESTER HANDLE AS PER DRAWING NO AL6 354 342 LF7440208428
Specification
ARRESTER HANDLE AS PER DRAWING NO AL6 354 342
Drawing no.
DRAWING NO AL6.354.342
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
DRIVE AS PER DRAWING NO AL6 337 172 LF7440208413
Physical Verification needed
Description
DRIVE AS PER DRAWING NO AL6 337 172 LF7440208413
Specification
DRIVE AS PER DRAWING NO AL6 337 172
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
CHANGE MAGNIFICATION MECHANISM NO AL6 063 266 LF7440208411
Physical Verification needed
Description
CHANGE MAGNIFICATION MECHANISM NO AL6 063 266 LF7440208411
Specification
CHANGE MAGNIFICATION MECHANISM NO AL6 063 266
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
DISPLACEMENT MECHANISM DRAWING NO AL6 063 257 LF7440208418
Physical Verification needed
Description
DISPLACEMENT MECHANISM DRAWING NO AL6 063 257 LF7440208418
Specification
DISPLACEMENT MECHANISM DRAWING NO AL6 063 257
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
ALIGNMENT ADJUSTMENT MECHANISM DRG No AL6 060 051 LF7440208417
Physical Verification needed
Description
ALIGNMENT ADJUSTMENT MECHANISM DRG No AL6 060 051 LF7440208417
Specification
ALIGNMENT ADJUSTMENT MECHANISM DRG No AL6 060 051
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
DRIVE AS PER DRAWING NO AL6 337 251 LF7440208422
Physical Verification needed
Description
DRIVE AS PER DRAWING NO AL6 337 251 LF7440208422
Specification
DRIVE AS PER DRAWING NO AL6 337 251
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
DRIVE AS PER DRAWING NO AL6 337 166 LF7440208421
Physical Verification needed
Description
DRIVE AS PER DRAWING NO AL6 337 166 LF7440208421
Specification
DRIVE AS PER DRAWING NO AL6 337 166
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
CARDAN SHAFT AS PER DRAWING NO AL6 308 131 LF7440208434
Physical Verification needed
Description
CARDAN SHAFT AS PER DRAWING NO AL6 308 131 LF7440208434
Specification
CARDAN SHAFT AS PER DRAWING NO AL6 308 131
Testing / Inspection Facility
Testing / Inspection Facility
74
100
Number
CARRIAGE AS PER DRAWING NO AL6 200 149 LF7440208433
Physical Verification needed
Description
CARRIAGE AS PER DRAWING NO AL6 200 149 LF7440208433
Specification
CARRIAGE AS PER DRAWING NO AL6 200 149
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
HOOD AS PER DRAWING NO AL6 437111 LF7440208438
Physical Verification needed
Description
HOOD AS PER DRAWING NO AL6 437111 LF7440208438
Specification
HOOD AS PER DRAWING NO AL6 437111
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
ADJUSTING UNIT AS PER DRAWING NO AL6 060 034 LF7440208432
Physical Verification needed
Description
ADJUSTING UNIT AS PER DRAWING NO AL6 060 034 LF7440208432
Specification
ADJUSTING UNIT AS PER DRAWING NO AL6 060 034
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
SHAFT AS PER DRAWING NO AL6 308 086 LF7440208420
Physical Verification needed
Description
SHAFT AS PER DRAWING NO AL6 308 086 LF7440208420
Specification
SHAFT AS PER DRAWING NO AL6 308 086
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number
SHAFT AS PER DRAWING NO AL6 308 084 LF7440208419
Physical Verification needed
Description
SHAFT AS PER DRAWING NO AL6 308 084 LF7440208419
Specification
SHAFT AS PER DRAWING NO AL6 308 084
Testing / Inspection Facility
Testing / Inspection Facility
74
40
Number