Name
Code
Quantity
Approx Value
Select
IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4
Description
IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4
Specification
IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4
Drawing no.
IC K 1202 STAR 4
Testing / Inspection Facility
70
2580
Number
BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Description
BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Specification
BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Drawing no.
TEND 2383 STAR 8
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
1521
Number
DEVELOPMENT MANUFACTURE AND SUPPLY OF PACKING BOX AS PER SPECIFICATION NO 7167 PACKING BOX SPEC CQB ATTACHED
Physical Verification needed
Description
DEVELOPMENT, MANUFACTURE & SUPPLY OF PACKING BOX AS PER SPECIFICATION NO.7167/PACKING BOX/SPEC/CQB (ATTACHED)
Specification
AS PER SPECIFICATION NO.7167/PACKING BOX/SPEC/CQB (ATTACHED)
Drawing no.
AS PER SPECIFICATION NO.7167/PACKING BOX/SPEC/CQB (ATTACHED)
Testing / Inspection Facility
70
02
Number
FEED TRAY INTEGRATED FOR LMG BELT FED
Physical Verification needed
Description
FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Specification
FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Drawing no.
1804 01 05 00 00 001 00DA
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
70
25
Number
CYLINDER GAS FOR LMG BELT FED
Physical Verification needed
Description
CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Specification
CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Drawing no.
1804 01 01 01 00 001 00DA
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
70
25
Number
HAND GUARD RIGHT and LEFT FOR LMG BELT FED
Physical Verification needed
Description
HAND GUARD RIGHT & LEFT AS PER DRG.NO. 1804 01 01 00 00 001 00DA & 1804 01 01 00 00 002 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Specification
HAND GUARD RIGHT & LEFT AS PER DRG.NO. 1804 01 01 00 00 001 00DA & 1804 01 01 00 00 002 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
Drawing no.
1804 01 01 00 00 001 00DA & 1804 01 01 00 00 002 00DA
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
70
25
Number
RACK 140
Physical Verification needed
Description
RACK 172.27.140
Specification
RACK 172.27.140
Manufacturing Technology
TO BE SUBMITTED AS PER VQC
Testing / Inspection Facility
TO BE SUBMITTED AS PER VQC
62
175
Number
HALF COUPLING
Physical Verification needed
Description
HALF COUPLING 176.23.120-4
Specification
HALF COUPLING 176.23.120-4
Manufacturing Technology
TO BE SUBMITTED AS PER VQC
Testing / Inspection Facility
TO BE SUBMITTED AS PER VQC
62
150
Number
CHAIN 004CB
Physical Verification needed
Description
CHAIN 172.28.004CB-1
Specification
CHAIN 172.28.004CB-1
Manufacturing Technology
TO BE SUBMITTED AS PER VQC
Testing / Inspection Facility
TO BE SUBMITTED AS PER VQC
62
619
Number
BODY 184CBCB
Physical Verification needed
Specification
172.02.184CBCB
Manufacturing Technology
TO BE SUBMITTED AS PER VQC
Testing / Inspection Facility
TO BE SUBMITTED AS PER VQC
62
271
Number
LUG 272
Physical Verification needed
Description
LUG 188.10.272
Specification
AS PER VQC ATTACHED
Testing / Inspection Facility
62
100
Number
WEDGE 094
Physical Verification needed
Description
WEDGE 172.25.094-1
Specification
AS PER VQC ATTACHED
Testing / Inspection Facility
62
466
Number
HUB TO LF 6206414026
Physical Verification needed
Description
HUB TO DRG NO: 172.54.001-1
Specification
GOST 26645-85
Testing / Inspection Facility
62
40
Number
REDUCTION GEAR CASE TO LF 3806402015
Physical Verification needed
Description
REDUCTION GEAR CASE TO DRG NO: 175.41.031/C
Specification
GOST 2685-75
Testing / Inspection Facility
38
125
Number
FLAP RIGHT HAND 028CB
Physical Verification needed
Description
FLAP RIGHT HAND
Specification
FLAP RIGHT HAND
Testing / Inspection Facility
62
104
Number
INSERT TO DRG NO 2A42 01 002 WITH FIRM S MATERIAL REQD FOR 30mm CANNON C1002 DC No 18845 W DT 13 01 2004 FOR DC LATEST ISSUE TO BE FOLLOWED
Physical Verification needed
Description
INSERT TO DRG NO. 2A42.01.002 (WITH FIRM'S MATERIAL) REQD FOR 30mm CANNON (C1002) DC No. 18845-W DT.13.01.2004. FOR DC LATEST ISSUE TO BE FOLLOWED
Specification
INSERT TO DRG NO. 2A42.01.002 (WITH FIRM'S MATERIAL) REQD FOR 30mm CANNON (C1002) DC No. 18845-W DT.13.01.2004. FOR DC LATEST ISSUE TO BE FOLLOWED
Drawing no.
DRG NO. 2A42.01.002
Testing / Inspection Facility
70
444
Number
Cocking Handle for JVPC
Physical Verification needed
Description
COCKING HANDLE DRG NO. 0204 03 04 01 12 001 12DA & DRG NO. 0204 03 04 01 12 001 22DA
Specification
COCKING HANDLE DRG NO. 0204 03 04 01 12 001 12DA & DRG NO. 0204 03 04 01 12 001 22DA
Drawing no.
DRG NO. 0204 03 04 01 12 001 12DA & DRG NO. 0204 03 04 01 12 001 22DA
Manufacturing Technology
Machining and Plastic Moulding
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
70
386
Number
BUTT ARMS MOULDING FOR JVPC
Physical Verification needed
Description
BUTT ARMS MOULDING DRG. NO. 0204-03-04-03-17-000-00DA
Specification
BUTT ARMS MOULDING DRG. NO. 0204-03-04-03-17-000-00DA
Drawing no.
0204-03-04-03-17-000-00DA
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing.
70
287
Number
PISTOL GRIP FOR JVPC
Physical Verification needed
Description
PISTOL GRIP FOR JVPC 5.56 X 30MM DRG NO. 0204-03-04-00-02-001-12DA SHEET NO.1/2 & DRG NO. 0204-03-04-00-02-001-22DA SHEET NO.2/2 CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
Specification
PISTOL GRIP FOR JVPC 5.56 X 30MM DRG NO. 0204-03-04-00-02-001-12DA SHEET NO.1/2 & DRG NO. 0204-03-04-00-02-001-22DA SHEET NO.2/2 CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
Drawing no.
DRG NO. 0204-03-04-00-02-001-12DA SHEET NO.1/2 & DRG NO. 0204-03-04-00-02-001-22DA SHEET NO.2/2 CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimension given in the drawing & other parameter which are mentioned in relevant drawing.
70
296
Number
ROLLER 18X26
Physical Verification needed
Description
ROLLER TY:37.006.075-75(DIV 18X26AP)
Specification
AS PER VQC ATTACHED
Testing / Inspection Facility
62
40328
Number
LEVER114
Physical Verification needed
Specification
AS PER ATTACHED
Testing / Inspection Facility
62
463
Number
BUSH 036
Testing / Inspection Facility
62
326
Number
BEARING SH8
Physical Verification needed
Specification
VQC ATTACHED
Testing / Inspection Facility
62
2682
Number
Steel Flat 75x40mm
Description
ST. FLAT 75(+/-5.0)MM X 40(+/-2.0)MM TO SPECN IS:6603-2001, DESIGNATION X12CR12 OR X20CR13. MACRO ETCH TEST & NMIR TEST (FOR MODERATELY/NON-STRESSED(II)) AS PER ANX. ‘A’ NATURE ‘C’
Specification
ST. FLAT 75(+/-5.0)MM X 40(+/-2.0)MM TO SPECN IS:6603-2001, DESIGNATION X12CR12 OR X20CR13. MACRO ETCH TEST & NMIR TEST (FOR MODERATELY/NON-STRESSED(II)) AS PER ANX. ‘A’ NATURE ‘C’
Testing / Inspection Facility
01
250
Kilogram
Receiver Body for 9X19 mm Machine Pistol
Physical Verification needed
Description
Receiver Body for 9X19 mm Machine Pistol as per Drawing
Specification
Receiver Body for 9X19 mm Machine Pistol as per Drawing
Drawing no.
2101 01 02 01 05 001 00DA
Manufacturing Technology
As per Drawing As per Drawing
Testing / Inspection Facility
70
7
Number
CASE TO LF 6206211055
Physical Verification needed
Description
CASE TO DRG NO: 172.28.001-2
Specification
GOST 977-88
Testing / Inspection Facility
62
300
Number
Guide Casting and Machining as per drawing No SK 6501 TE
Physical Verification needed
Description
Guide- Casting and Machining as per drawing No. SK- 6501 /TE
Specification
Guide- Casting and Machining as per drawing No. SK- 6501 /TE
Drawing no.
Drawing No. SK- 6501 /TE
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions, give in the drawing and other parameters which are mentioned in relevant drawing.
70
403272
Number
Return Spring Finish as per drawing no SK 6505 TE
Physical Verification needed
Description
Return Spring Finish as per drawing no SK 6505 TE
Specification
Return Spring Finish as per drawing no SK 6505 TE
Drawing no.
drawing no SK 6505 TE
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions, given in the drawing and other parameters which are mentioned in the relevant drawing.
70
403272
Number
Guide Rod Finish as per drawing no SK 6504 TE
Physical Verification needed
Description
Guide Rod Finish as per drawing no SK 6504 TE
Specification
Guide Rod Finish as per drawing no SK 6504 TE
Drawing no.
drawing no SK 6504 TE
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions, given in the drawing and other parameters which are mentioned in the relevant drawing.
70
403272
Number
Rod Finish as per drawing no SK 6503 TE
Physical Verification needed
Description
Rod Finish as per drawing no SK 6503 TE
Specification
Rod Finish as per drawing no SK 6503 TE
Drawing no.
Drawing no SK 6503 TE
Manufacturing Technology
Machining, Bending and grinding
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions, give in the drawing and other parameters which are mentioned in relevant drawing.
70
403272
Number
Sleeve Finish as per drawing no SK 6502 TE Through MIM Route
Physical Verification needed
Description
Sleeve Finish as per drawing no SK 6502 TE Through MIM Route
Specification
Sleeve Finish as per drawing no SK 6502 TE Through MIM Route
Drawing no.
drawing no SK 6502 TE Through MIM Route
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions, given in the drawing and other parameters which are mentioned in the relevant drawing.
70
403272
Number
FRONT FLANGE LH TO LF 3906401045
Physical Verification needed
Description
FRONT FLANGE LH TO DRG NO 172 40 201 1A F
Specification
GOST 4543 71
Drawing no.
172 40 201 1A F
Manufacturing Technology
Firm has to fill & submit the method of manufacture (Technology) & infrastructure involved in production of subject item which is uploaded as blank format along with the tender. Further the same will be scrutinized and recommendation will be provided by the Capacity Verification team based on the documents & proofs submitted by the firms.
Testing / Inspection Facility
39
178
Number
NOZZLE TO LF 3801087025
Physical Verification needed
Description
NOZZLE TO DRG NO: 172.87.188-1/C
Specification
GOST 977 - 88
Drawing no.
172.87.188-1/C
Testing / Inspection Facility
38
26
Number
LEFT HAND STRAP TO LF 6201201097
Physical Verification needed
Description
LEFT HAND STRAP TO DRG NO: 184.01.060
Specification
GOST 19184-73
Testing / Inspection Facility
62
50
Number
COVER TO LF 6206206215
Physical Verification needed
Description
COVER TO DRG NO: 434.21.033-1
Testing / Inspection Facility
62
171
Number