FABRIC TWILL WEAVE POLYESTER AND COTTON (67:33) DISRUPTIVE PATT WR 290 GSM 150 cm WIDTH MIN WITH INDIAN ARMY LOGO
PROV.SPECIFICATION No. PROV/S/2599/TC11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE" SUITABLE YARN COUNT MAY BE USED IN WARP & WEFT IN 3/1 TWILL WEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH FEEL& FINISH"& CLAUSE No. 16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA (T&C)/PMS/35(d), EXCEPT THAT THE FABRIC SHALL BE SUPPLIED IN ROLL FORM ONLYAS PER RELEVANT CLAUSE OF SPECIFICATION.
Specification
FABRIC TWILL WEAVE POLYESTER AND COTTON (67:33) DISRUPTIVE PATT WR 290 GSM 150 cm WIDTH MIN WITH INDIAN ARMY LOGO
PROV.SPECIFICATION No. PROV/S/2599/TC11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE" SUITABLE YARN COUNT MAY BE USED IN WARP & WEFT IN 3/1 TWILL WEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH FEEL& FINISH"& CLAUSE No. 16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA (T&C)/PMS/35(d), EXCEPT THAT THE FABRIC SHALL BE SUPPLIED IN ROLL FORM ONLYAS PER RELEVANT CLAUSE OF SPECIFICATION.
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
81607
Metre
4884
O113-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
WEBBING NYLON BLUE OF SIZES (FOR COMBINATION HARNESS-CHEST& SIT) ONE SET CONSISTING OF
(1) WEBBING NYLON THICK 48MM WIDE BLUE - 7.00 MTR
(2) WEBBING NYLON THIN 38MM WIDE BLUE - 4.70 MTR
(3) WEBBING NYLON THIN 25MM WIDE BLUE - 1.15 MTR
DMSRDE/T&GS/93/411(b) AND IN APPEARANCE, SHADE, FINISH ANDDM IN OTHER RESPECTS NOT DEFINED IN SPECIFICATION, THE MATERIAL SHALL CONFORM TO THE CORRESPONDING SEALED PATTERN HELD IN CUSTODY OF THE CONTROLLER, CQA(T&C), KANPUR 1.EACH WEBBING TO BE SUPPLIED IN ROLL FORM i.e.MULTIPLE OF SCALE X SET+5MTR FOR TESTING 2. MIN. ROLL LENGTH IS 100MTR FOR EACH WEBBING )
3. ALL THE THREE WEBBING SHOULD BE OF SAME SHADE.
MANUFACTURING, SUPPLY INSTALLATION AND PROVING OF TEST STAND TO DRG. NO. ADK:9699-5751 FOR TURRET TRAVERSE MECHANISM (DRG. NO.: 176.23CB-3CB) AS PER SCOPE OF WORK ATTACHED.
JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 32 nos AND JUNCTION BOX SS304 EX ENCLOSURE 330X300X121MM Qty 48 nos AND JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 64 nos (Detailed Description attached in Specification File)
Specification
JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 32 nos AND JUNCTION BOX SS304 EX ENCLOSURE 330X300X121MM Qty 48 nos AND JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 64 nos (Detailed Description attached in Specification File)
1) For checking and continuity and short circuit test by multi meter.
2) For Insulation testing between connector to connector, Body to connector Insulation tester required
CORDAGE NYLON BRAIDED 250 KG OLIVE DRAB SHADE NO. 298 AS PER SPECN NO. IS:5-1994
Specification
Specn. No. IS : 4227-1998 Variety No. 12 Except that:-
Parameters Linear Density of Yarn(Tex) Mass (g/100m)
Tolerance -5% to +17% +5% over specified
For Dyed i.e.698, max
ROLL LENGTH 285 MTR.
EX-SAMPLING
POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050
Specification
POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050
Drawing no.
FOR VISUAL REFERENCE PURPOSE ONLY DRG NO TAR K 7050STAR
Fabric Nylon 75 GSM White PU Coated 152cms Minimum
Specification:-IND/TC/0157, "Firm Trade Mark in Abbreviated form in smallest possible letter to be printed on the uncoated side of the fabric along selvedge at an interval of one meter.The height of letter should not exceed 8mm. Dark/Bright Colour to be avoided.
Specification
Fabric Nylon 75 GSM White PU Coated 152cms Minimum
Specification:-IND/TC/0157, "Firm Trade Mark in Abbreviated form in smallest possible letter to be printed on the uncoated side of the fabric along selvedge at an interval of one meter.The height of letter should not exceed 8mm. Dark/Bright Colour to be avoided.
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
FABRIC NYLON LOW POROSITY 52 GM ODS WIDTH 94CM
Prov.Specn.NO.ADRDE/SPECN.1983/14(except Air Porosity Test).AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER (T&C),KANPUR QAI NO CQAT&C/QAI/99/TC-11
Specification
FABRIC NYLON LOW POROSITY 52 GM ODS WIDTH 94CM
Prov.Specn.NO.ADRDE/SPECN.1983/14(except Air Porosity Test).AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER (T&C),KANPUR QAI NO CQAT&C/QAI/99/TC-11
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )