5201
OFMK/TM/OTE/V427719
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
Name
Code
Quantity
Approx Value
Select
SPRING LOCK CQA
Description
SPRING LOCK CQA(I) 393/23
Specification
SPRING LOCK CQA(I) 393/23
Manufacturing Technology
SPRING LOCK CQA(I) 393/23
Testing / Inspection Facility
80
500
Number
WINDING ARMATURE
Description
WINDING ARMATURE TO DRG NO: CQA(I) 393/SA4
Specification
WINDING ARMATURE TO DRG NO: CQA(I) 393/SA4
Manufacturing Technology
WINDING ARMATURE TO DRG NO: CQA(I) 393/SA4
Testing / Inspection Facility
80
500
Number
GRIP HANDLE TO DRAWING
Description
GRIP HANDLE TO DRAWING NO: CQA(I) 393/1
Specification
GRIP HANDLE TO DRAWING NO: CQA(I) 393/1
Manufacturing Technology
GRIP HANDLE TO DRAWING NO: CQA(I) 393/1
Testing / Inspection Facility
80
500
Number
GRIP HANDLE CQA
Description
GRIP HANDLE CQA(I) 393/17
Specification
GRIP HANDLE CQA(I) 393/17
Testing / Inspection Facility
80
500
Number
MAGNET PERMANENT
Description
MAGNET PERMANENT
Specification
MAGNET PERMANENT
Drawing no.
DRG NO: CQA(I) 393/8
Testing / Inspection Facility
80
500
Number
5202
3193000956
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Steel Forging Cylinder Gas
Description
Steel Forging Cylinder Gas SKM 306*6 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG
Specification
Steel Forging Cylinder Gas SKM 306*6 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
01
845
Number
5203
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
Forging for BREECH BLOCK DETENT
Physical Verification needed
Testing / Inspection Facility
00
100
Ample
CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42 03 015 C3015
Physical Verification needed
Description
"CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42.03.015 (C3015) "
Specification
AS PER DRG OF "CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42.03.015 (C3015) "
Testing / Inspection Facility
00
100
Number
CONVERSION FORG TO DRG NO 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR GAS PISTON C3009
Physical Verification needed
Description
CONVERSION FORG. TO DRG.NO. 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT. REQD FOR GAS PISTON C3009
Specification
AS PER DRG OF CONVERSION FORG. TO DRG.NO. 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT. REQD FOR GAS PISTON C3009
Testing / Inspection Facility
00
100
Number
CONVERSION FORGING TO DRG NO 64C 3006 200 D3 REQUIRED FOR EJECTOR TO DRG NO 2A4203 006 C3006
Physical Verification needed
Description
CONVERSION FORGING TO DRG NO. 64C 3006 200 D3 REQUIRED FOR EJECTOR TO DRG. NO. 2A42.03.006 (C3006)
Specification
AS PER DRG OF CONVERSION FORGING TO DRG NO. 64C 3006 200 D3 REQUIRED FOR EJECTOR TO DRG. NO. 2A42.03.006 (C3006)
Testing / Inspection Facility
00
100
Number
CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR PISTON TO DRG NO 2A42 03 004 C3004
Physical Verification needed
Description
CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR
PISTON TO DRG NO 2A42.03.004 (C3004)
Specification
AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR
PISTON TO DRG NO 2A42.03.004 (C3004)
Testing / Inspection Facility
00
100
Number
CONVERSION FORGING TO DRG NO 64C 3001 200 C3 REQUIRED FOR SLIDER TO DRG NO 2A42 03 001 C3001
Physical Verification needed
Description
CONVERSION FORGING TO DRG. NO. 64C 3001 200 C3 REQUIRED FOR SLIDER TO DRG. NO. 2A42.03.001 (C3001)
Specification
AS PER DRG OF CONVERSION FORGING TO DRG. NO. 64C 3001 200 C3 REQUIRED FOR SLIDER TO DRG. NO. 2A42.03.001 (C3001)
Testing / Inspection Facility
00
100
Number
FORGING DRG 64C 2037 200 E3 FIRMS MATERIAL REQD FOR BARREL CATCH C2037
Physical Verification needed
Description
FORGING DRG.64C 2037 200 E3. (FIRM'S MATERIAL)
REQD FOR: BARREL CATCH C2037
Specification
AS PER DRG OF FORGING DRG.64C 2037 200 E3. (FIRM'S MATERIAL)
REQD FOR: BARREL CATCH C2037
Testing / Inspection Facility
70
100
Number
FORGING TO DRG 64C 2035 200 D3 FIRMS MATERIAL REQD FOR C2035 GAS CYLINDER
Description
FORGING TO DRG. 64C 2035 200 D3 (FIRM'S MATERIAL)
REQD FOR C2035 GAS CYLINDER.
Specification
AS PER DRG OF IFORGING TO DRG. 64C 2035 200 D3 (FIRM'S MATERIAL)
REQD FOR C2035 GAS CYLINDER.
Testing / Inspection Facility
70
100
Number
INVESTMENT CASTING TO DRG No 64C 2028 250 J3 REQUIRED FOR BRAKE TO DRG No 2A42 02 028 C2028
Description
INVESTMENT CASTING TO DRG.No.: 64C 2028 250 J3.
REQUIRED FOR: BRAKE TO DRG.No.: 2A42.02.028 (C2028)
Specification
AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 2028 250 J3.
REQUIRED FOR: BRAKE TO DRG.No.: 2A42.02.028 (C2028)
Testing / Inspection Facility
70
100
Number
CONVERSION FORG TO DRG NO 64C 2011 200 E3 WITHOUT SLOT REQD FOR ROD TO DRG NO 2A42 02 011 C2011
Physical Verification needed
Description
CONVERSION FORG TO DRG NO 64C 2011 200 E3 WITHOUT SLOT
REQD. FOR ROD TO DRG. NO. 2A42.02.011 (C2011)
Specification
AS PER DRG OF CONVERSION FORG TO DRG NO 64C 2011 200 E3 WITHOUT SLOT
REQD. FOR ROD TO DRG. NO. 2A42.02.011 (C2011)
Testing / Inspection Facility
00
100
Number
CONVERSION FORGING TO DRG NO 64C 2009 200 G3 REQD FOR INNER RING TO DRG NO 2A42 02 009 C2009
Physical Verification needed
Description
CONVERSION FORGING TO DRG NO 64C 2009 200 G3
REQD FOR: INNER RING TO DRG.NO 2A42.02.009 (C2009)
Specification
AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 2009 200 G3
REQD FOR: INNER RING TO DRG.NO 2A42.02.009 (C2009)
Testing / Inspection Facility
00
100
Number
BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY LF No 7011655072
Physical Verification needed
Description
BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY to D.S. CAT No.1005-004025, D.C No.26416-SA. dt.09.05.2008 with details of latest issue D.S. CAT No.5305-005010, 5340-016097, 1005-001664, 1005-004026, 1005-004028, 1005-005449, 5305-005009, 1005-004027, TEND 1911 REF. NEW DC
Specification
As per Drawing
Drawing no.
D.S. CAT No.1005-004025
Testing / Inspection Facility
70
100
Number
FORGING TO DRG 64C 2007 200 E3 WITH FIRMS MATERIAL REQD FOR SEMI RING C2007
Physical Verification needed
Description
FORGING TO DRG 64C 2007 200 E3.
WITH FIRM'S MATERIAL REQD FOR: SEMI RING C2007
Specification
AS PER DRG OF FORGING TO DRG 64C 2007 200 E3.
WITH FIRM'S MATERIAL REQD FOR: SEMI RING C2007
Testing / Inspection Facility
70
100
Number
OPEN FORGING TO DRG NO TEND 1831 REQUIRED FOR BREECH C2001 TO DRG No 2A42 02 001 FOR IFD ONLY 30mm CANNON
Physical Verification needed
Description
OPEN FORGING TO DRG.No.: TEND-1831* REQUIRED FOR BREECH(C2001)
TO DRG.No.: 2A42 02 001 (FOR IFD ONLY) (30mm CANNON)
Specification
AS PER DRG OF OPEN FORGING TO DRG.No.: TEND-1831* REQUIRED FOR BREECH(C2001)
TO DRG.No.: 2A42 02 001 (FOR IFD ONLY) (30mm CANNON)
Testing / Inspection Facility
70
100
Number
CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR FRONT STRIPPER C1092 STRIP RETAINING METALLIC C1093
Physical Verification needed
Description
CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR
FRONT STRIPPER C1092, STRIP RETAINING METALLIC C1093
Specification
AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR
FRONT STRIPPER C1092, STRIP RETAINING METALLIC C1093
Testing / Inspection Facility
00
100
Number
CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR FRONT STRIPPER C1092 STRIP RETAINING METALLIC C1093
Physical Verification needed
Description
CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR
FRONT STRIPPER C1092, STRIP RETAINING METALLIC C1093
Specification
AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR
FRONT STRIPPER C1092, STRIP RETAINING METALLIC C1093
Testing / Inspection Facility
00
100
Number
FORGING TO DRG 64C 1081 200 D3 WITH FIRMS MATERIAL REQD FOR ARM C1081
Physical Verification needed
Description
FORGING TO DRG. 64C 1081 200 D3.
WITH FIRM'S MATERIAL. REQD. FOR ARM C1081.
Specification
AS PER DRG OF FORGING TO DRG. 64C 1081 200 D3.
WITH FIRM'S MATERIAL. REQD. FOR ARM C1081.
Testing / Inspection Facility
70
100
Number
CONVERSION FORGING DRG No 64C 1026 200 E3 REQUIRED FOR HOLDER C1026
Physical Verification needed
Description
CONVERSION FORGING DRG.No. 64C 1026 200 E3
REQUIRED FOR HOLDER C1026
Specification
AS PER DRG TO CONVERSION FORGING DRG.No. 64C 1026 200 E3
REQUIRED FOR HOLDER C1026
Testing / Inspection Facility
00
100
Number
INVESTMENT CASTING TO DRG No 64C 1024 250 H3
Physical Verification needed
Description
INVESTMENT CASTING TO DRG No 64C 1024 250 H3
Specification
AS PER DRG TO INVESTMENT CASTING TO DRG No 64C 1024 250 H3
Drawing no.
64C 1024 250 H3
Testing / Inspection Facility
70
100
Number
FORGING TO DRG NO 64C 1005 200 F3 WITH FIRM S MATERIAL REQD FOR STRIP C1005
Physical Verification needed
Description
FORGING TO DRG NO 64C 1005 200 F3.
WITH FIRM'S MATERIAL.
REQD FOR: STRIP C1005
Specification
AS PER DRG TO FORGING TO DRG NO 64C 1005 200 F3.
WITH FIRM'S MATERIAL.
REQD FOR: STRIP C1005
Testing / Inspection Facility
70
100
Number
PLUG TO DRAWING NO CQA
Description
PLUG TO DRAWING NO: CQA(I) 393/4
Specification
PLUG TO DRAWING NO: CQA(I) 393/4
Manufacturing Technology
PLUG TO DRAWING NO: CQA(I) 393/4
Testing / Inspection Facility
80
500
Number
CONVERSION FORGING TO DRG NO 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG NO 2A42 05 116 C5116
Physical Verification needed
Description
CONVERSION FORGING TO DRG. NO. 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG. NO. 2A42.05.116 (C5116)
Specification
AS PER DRG TO CONVERSION FORGING TO DRG. NO. 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG. NO. 2A42.05.116 (C5116)
Testing / Inspection Facility
00
100
Number
Front Frame Forging
Physical Verification needed
Description
Front Frame Forging for Front Frame as per drawing
Specification
Front Frame Forging for Front Frame as per drawing
Drawing no.
30C 1104 001 A3
Manufacturing Technology
FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING
AND QUALITY MONITORING FOR INSPECTION PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT
DRAWING AND QUALITY MONITORING FOR INSPECTION
Testing / Inspection Facility
FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND
QUALITY MONITORING FOR INSPECTION MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR
RAW MATERIAL
70
100
Number
5204
2019000129
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
FABRIC TWILL WEAVE POLY AND COTTON 67 RATIO 33 DISRUPTIVE PATT WR 290 GSM 150 cm WIDTH MIN WITH INDIAN ARMY LOGO
Description
FABRIC TWILL WEAVE POLYESTER AND COTTON (67:33) DISRUPTIVE PATT WR 290 GSM 150 cm WIDTH MIN WITH INDIAN ARMY LOGO
PROV.SPECIFICATION No. PROV/S/2599/TC11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE" SUITABLE YARN COUNT MAY BE USED IN WARP & WEFT IN 3/1 TWILL WEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH FEEL& FINISH"& CLAUSE No. 16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA (T&C)/PMS/35(d), EXCEPT THAT THE FABRIC SHALL BE SUPPLIED IN ROLL FORM ONLYAS PER RELEVANT CLAUSE OF SPECIFICATION.
Specification
FABRIC TWILL WEAVE POLYESTER AND COTTON (67:33) DISRUPTIVE PATT WR 290 GSM 150 cm WIDTH MIN WITH INDIAN ARMY LOGO
PROV.SPECIFICATION No. PROV/S/2599/TC11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE" SUITABLE YARN COUNT MAY BE USED IN WARP & WEFT IN 3/1 TWILL WEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH FEEL& FINISH"& CLAUSE No. 16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA (T&C)/PMS/35(d), EXCEPT THAT THE FABRIC SHALL BE SUPPLIED IN ROLL FORM ONLYAS PER RELEVANT CLAUSE OF SPECIFICATION.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
81607
Metre
5205
O113-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
DIFFUSER LIGHT GREEN MK I
Description
DIFFUSER LIGHT GREEN MK-I CELASTOID(TRANSLUCENT) DRG.NO. OS-14634 SIZE-130X158X0.76MM THICK, TOLERANCE-0.15MM
Specification
DIFFUSER LIGHT GREEN MK-I CELASTOID(TRANSLUCENT) DRG.NO. OS-14634 SIZE-130X158X0.76MM THICK, TOLERANCE-0.15MM
Testing / Inspection Facility
74
1174
Number
DIFFUSER LIGHT WHITE MK I
Description
DIFFUSER LIGHT WHITE MK-I AS PER DRG.NO.OS-14633 SIZE-130X158X0.76MM THICK, TOLERANCE-0.15MM
Specification
DIFFUSER LIGHT WHITE MK-I AS PER DRG.NO.OS-14633 SIZE-130X158X0.76MM THICK, TOLERANCE-0.15MM
Testing / Inspection Facility
74
1174
Number
LEAD ELECTRICAL OS 1131A
Physical Verification needed
Description
LEAD ELECTRICAL OS-1131A CONSISTING OF COMPONENTS AS PER DRG.NO.OS 14620,14621,14622,14623,14624,14625, 14626,14627
Specification
LEAD ELECTRICAL OS-1131A CONSISTING OF COMPONENTS AS PER DRG.NO.OS 14620,14621,14622,14623,14624,14625, 14626,14627
Drawing no.
OS 14620,14621,14622,14623,14624,14625, 14626,14627
Manufacturing Technology
ELECTRONIC SUB ASSY , ASSEMBLIES, MULTI LAYERED PCB
Testing / Inspection Facility
PCB DESIGNING
COMPONENT SELECTION
ASSOCIATED TESTING / INSPECTION FACILITIES
74
1370
Number
CASE LIGHT SET
Physical Verification needed
Description
CASE LIGHT SET, DRG.NO.OS-14619 SHEET-1 & SHEET-2 FOR LIGHT BEACON DIRECTOR MK-I
Specification
CASE LIGHT SET, DRG.NO.OS-14619 SHEET-1 & SHEET-2 FOR LIGHT BEACON DIRECTOR MK-I
Drawing no.
OS-14619 SHEET-1 & SHEET-2
Manufacturing Technology
MECHANICAL COMPONENTS HAVING MORE THAN FIVE CONTROL DIMENSION
Testing / Inspection Facility
MACHINING & ASSOCIATED TESTING/INSPECTION FACILITIES
74
1367
Ample
BRACKET OS 14630
Description
BRACKET OS-14630 SHT 1&2
Specification
BRACKET OS-14630 SHT 1&2
Drawing no.
OS-14630 SHT 1&2
Manufacturing Technology
MECHANICAL COMPONENTS HAVING MORE THAN FIVE CONTROL DIMENSION
Testing / Inspection Facility
MACHINING & ASSOCIATED TESTING/INSPECTION FACILITIES
74
1367
Number
HOLDER LIGHT DIFFUSER CII 423
Physical Verification needed
Description
HOLDER LIGHT DIFFUSER CII 423 CONSISTING OF DRG NO OS 14628 SHT 1,2,3,4 & OS 14629
Specification
HOLDER LIGHT DIFFUSER CII 423 CONSISTING OF DRG NO OS 14628 SHT 1,2,3,4 & OS 14629
Drawing no.
OS 14628 SHT 1,2,3,4 & OS 14629
Manufacturing Technology
MECHANICAL COMPONENTS HAVING MORE THAN FIVE CONTROL DIMENSION
Testing / Inspection Facility
MACHINING & ASSOCIATED TESTING / INSPECTION FACILITIES
74
1367
Number
DIFFUSER LIGHT RED MK I
Description
DIFFUSER LIGHT RED MK-I CELASTOID(TRANSLUCENT) AS PER DRG.NO. OS-14632, SIZE 130X158X0.76MM THICK, TOLERANCE-0.15MM
Specification
DIFFUSER LIGHT RED MK-I CELASTOID(TRANSLUCENT) AS PER DRG.NO. OS-14632, SIZE 130X158X0.76MM THICK, TOLERANCE-0.15MM
Testing / Inspection Facility
74
2130
Number
BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
Physical Verification needed
Description
BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
Specification
BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
Manufacturing Technology
FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND
QUALITY MONITORING FOR INSPECTION MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR
RAW MATERIAL
Testing / Inspection Facility
FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING
AND QUALITY MONITORING FOR INSPECTION PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT
DRAWING AND QUALITY MONITORING FOR INSPECTION
70
100
Number
5206
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
HOSE TOWING VEHICLE EMERGENCY LINE SERVICE LINE TO DRG NO 2530 001006
Description
HOSE TOWING VEHICLE EMERGENCY LINE SERVICE LINE
TO DRG.NO.2530-001006.
Drawing no.
DRG. NO. 2530-001006.
Manufacturing Technology
HOSE TOWING VEHICLE EMERGENCY LINE SERVICE LINE
TO DRG.NO.2530-001006.
Testing / Inspection Facility
HOSE TOWING VEHICLE EMERGENCY LINE SERVICE LINE
TO DRG.NO.2530-001006.
90
786
Number
9069112686 PLUG BLANKING DOUBLE IAN 280 SA
Description
9069112686 PLUG BLANKING DOUBLE IAN 280 SA
Specification
9069112686 PLUG BLANKING DOUBLE IAN 280 SA
Manufacturing Technology
9069112686 PLUG BLANKING DOUBLE IAN 280 SA
Testing / Inspection Facility
9069112686 PLUG BLANKING DOUBLE IAN 280 SA
90
15
Number
SOCKET BLANKING PLUG ASSY
Description
SOCKET BLANKING PLUG ASSY A4/L75875
Specification
SOCKET BLANKING PLUG ASSY A4/L75875
Manufacturing Technology
SOCKET BLANKING PLUG ASSY A4/L75875
Testing / Inspection Facility
SOCKET BLANKING PLUG ASSY A4/L75875
90
11
Number
PLUG BOF 5057569
Description
PLUG BOF 5057569 184L7/0078
Specification
PLUG BOF 5057569 184L7/0078
Manufacturing Technology
PLUG BOF 5057569 184L7/0078
Testing / Inspection Facility
PLUG BOF 5057569 184L7/0078
90
189
Number
SOCKET BLANKING PLUG DRG IAN 284 SA
Description
SOCKET BLANKING PLUG DRG IAN 284 SA S4/L7/5828
Specification
SOCKET BLANKING PLUG DRG IAN 284 SA S4/L7/5828
Manufacturing Technology
SOCKET BLANKING PLUG DRG IAN 284 SA S4/L7/5828
Testing / Inspection Facility
SOCKET BLANKING PLUG DRG IAN 284 SA S4/L7/5828
90
119
Number
OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541 3020061
Description
OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541/3020061
Specification
OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541/3020061
Manufacturing Technology
OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541/3020061
Testing / Inspection Facility
OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541/3020061
90
26
Number
OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 194DL 0248
Description
OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 / 194DL 0248
Specification
OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 / 194DL 0248
Manufacturing Technology
OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 / 194DL 0248
Testing / Inspection Facility
OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 / 194DL 0248
90
58
Number
5207
MPF/OTE/19TE211238
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
LF NO 7107006004 4 Core Multimode Armoured Cable Make D Link Part No NCB FM6 20 AULS 04
Physical Verification needed
Description
4 Core Multimode Armoured Cable, Make: D-Link Part No: NCB-FM6 20-AULS-04
Specification
4 Core Multimode Armoured Cable, Make: D-Link Part No: NCB-FM6 20-AULS-04
Drawing no.
D Link Part No NCB FM6 20 AULS 04
Manufacturing Technology
Optic Fiber Manufacturing – Fiber Drawing, Stranding of Fiber – Tight Buffering & Stranding, Protective Jacketing - Cable Sheath /Jacket Extrusion
Testing / Inspection Facility
OTDR (Optical Time Domain Reflectometer) meter required for measuring point of defects, Attenuation, Bandwidth, Cut off wave length etc.
71
7500
Metre
RANGE PLATE RH TO DRG NO 30P 4009 st 2 REQUIRED FOR 40mm MGL
Physical Verification needed
Description
RANGE PLATE RH TO DRG NO 30P 4009 st 2 REQUIRED FOR 40mm MGL
Specification
As per Drawing and specification
Manufacturing Technology
FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING
AND QUALITY MONITORING FOR INSPECTIO PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT
DRAWING AND QUALITY MONITORING FOR INSPECTION
Testing / Inspection Facility
FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND
QUALITY MONITORING FOR INSPECTION MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR
RAW MATERIAL
70
100
Number
20mm Bolt Assembly to Drg No 44P03000 required for AMR
Description
20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),
Specification
20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),
Testing / Inspection Facility
20
100
Number
Forging for pre machining for Rear Cross
Physical Verification needed
Description
Forging for pre machining for Rear Cross
Specification
Forging for pre machining for Rear Cross
Drawing no.
30C 3011 002 A4
Manufacturing Technology
FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING
AND QUALITY MONITORING FOR INSPECTION PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT
DRAWING AND QUALITY MONITORING FOR INSPECTION
Testing / Inspection Facility
FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND
QUALITY MONITORING FOR INSPECTION MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR
RAW MATERIAL
70
100
Number
forging for pre machining of front frame
Physical Verification needed
Description
forging for pre machining of front frame
Specification
forging for pre machining of front frame
Drawing no.
30C 1104 002 A3
Manufacturing Technology
FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING
AND QUALITY MONITORING FOR INSPECTION
Testing / Inspection Facility
FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND
QUALITY MONITORING FOR INSPECTION
70
100
Number
Front Frame Forging
Physical Verification needed
Description
Front Frame Forging for Front Frame as per drawing
Specification
Front Frame Forging for Front Frame as per drawing
Drawing no.
30C 1104 001 A3
Manufacturing Technology
FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING
AND QUALITY MONITORING FOR INSPECTION PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT
DRAWING AND QUALITY MONITORING FOR INSPECTION
Testing / Inspection Facility
FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND
QUALITY MONITORING FOR INSPECTION MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR
RAW MATERIAL
70
100
Number
5208
110190301
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
WEBBING NYLON BLUE OF SIZES 48 MM 38 MM and 25 MM
Description
WEBBING NYLON BLUE OF SIZES – 48 MM, 38MM & 25MM
Specification
WEBBING NYLON BLUE OF SIZES (FOR COMBINATION HARNESS-CHEST& SIT) ONE SET CONSISTING OF
(1) WEBBING NYLON THICK 48MM WIDE BLUE - 7.00 MTR
(2) WEBBING NYLON THIN 38MM WIDE BLUE - 4.70 MTR
(3) WEBBING NYLON THIN 25MM WIDE BLUE - 1.15 MTR
DMSRDE/T&GS/93/411(b) AND IN APPEARANCE, SHADE, FINISH ANDDM IN OTHER RESPECTS NOT DEFINED IN SPECIFICATION, THE MATERIAL SHALL CONFORM TO THE CORRESPONDING SEALED PATTERN HELD IN CUSTODY OF THE CONTROLLER, CQA(T&C), KANPUR 1.EACH WEBBING TO BE SUPPLIED IN ROLL FORM i.e.MULTIPLE OF SCALE X SET+5MTR FOR TESTING 2. MIN. ROLL LENGTH IS 100MTR FOR EACH WEBBING )
3. ALL THE THREE WEBBING SHOULD BE OF SAME SHADE.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101877401
6502
Set
9999911184 MANUFACTURING SUPPLY INSTALLATION AND PROVING OF TEST STAND TO DRG NO ADK 9699 5751 FOR TURRET TRAVERSE MECHANISM DRG NO 176 23CB 3CB AS PER SCOPE OF WORK ATTACHED
Physical Verification needed
Description
MANUFACTURING, SUPPLY INSTALLATION AND PROVING OF TEST STAND TO DRG. NO. ADK:9699-5751 FOR TURRET TRAVERSE MECHANISM (DRG. NO.: 176.23CB-3CB) AS PER SCOPE OF WORK ATTACHED.
Specification
DRG. NO. ADK:9699-5751 AND SCOPE OF WORK ATTACHED
Drawing no.
DRG. NO. ADK:9699-5751
Manufacturing Technology
AS PER DRG AND SCOPE OF WORK ATTACHED
Testing / Inspection Facility
AS PER DRG ATTACHED AND SCOPE OF WORK ATTACHED
99
1
Whole job
CONVERSION FORGING DRG No 64C 1026 200 E3 REQUIRED FOR HOLDER C1026
Physical Verification needed
Description
CONVERSION FORGING DRG.No. 64C 1026 200 E3
REQUIRED FOR HOLDER C1026
Specification
AS PER DRG TO CONVERSION FORGING DRG.No. 64C 1026 200 E3
REQUIRED FOR HOLDER C1026
Testing / Inspection Facility
00
202
Number
INVESTMENT CASTING TO DRG No 64C 1024 250 H3
Description
INVESTMENT CASTING TO DRG No 64C 1024 250 H3
Specification
AS PER DRG TO INVESTMENT CASTING TO DRG No 64C 1024 250 H3
Drawing no.
64C 1024 250 H3
Testing / Inspection Facility
70
100
Number
ELECTRICAL TRIGGER ASSEMBLE SOLENOID TRIGGER ASSEMBLY TO DRG NO cd12 oblique 6n7 65P 11300
Physical Verification needed
Description
ELECTRICAL TRIGGER ASSEMBLE SOLENOID TRIGGER ASSEMBLY TO DRG NO cd12/6n7 65P 11300
Specification
ELECTRICAL TRIGGER ASSEMBLE SOLENOID TRIGGER ASSEMBLY TO DRG NO cd12/6n7 65P 11300
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE & SQAE
70
50
Number
JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 32 nos AND JUNCTION BOX SS304 EX ENCLOSURE 330X300X121MM Qty 48 nos AND JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 64 nos
Physical Verification needed
Description
JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 32 nos AND JUNCTION BOX SS304 EX ENCLOSURE 330X300X121MM Qty 48 nos AND JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 64 nos (Detailed Description attached in Specification File)
Specification
JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 32 nos AND JUNCTION BOX SS304 EX ENCLOSURE 330X300X121MM Qty 48 nos AND JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 64 nos (Detailed Description attached in Specification File)
Manufacturing Technology
Material Forming - Bending and Shearing
Material Removal - Drilling and Grinding
Material Joining - Welding
Testing / Inspection Facility
1) For checking and continuity and short circuit test by multi meter.
2) For Insulation testing between connector to connector, Body to connector Insulation tester required
71
144
Number
RIM TO PART NO 3049494
Physical Verification needed
Description
RIM TO PART NO 3049494
Specification
RIM TO PART NO 3049494
Testing / Inspection Facility
90
70
Number
BARREL AFTER HONING
Physical Verification needed
Description
BARREL AFTER HONNING
Specification
BARREL AFTER HONNING, AS PER DRAWING AND QUALITY MONITORING FOR INSPECTION
Manufacturing Technology
FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
Testing / Inspection Facility
FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR RAW MATERIAL
70
100
Number
Net Fabric Polyester 76 gsm 20 kgf BS
Description
Net Fabric Polyester 76 Gms. 20 Kgf BS For Width 120 cms +2 -0 cm excluding selvedge
Specification
SPEC NO. ADRDE/QMS/TDTM/F/2009/03(a), DT. 17-05-2021.
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110069084
2944
Metre
P B ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985
Physical Verification needed
Description
P B ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985
Specification
P B ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985
Manufacturing Technology
As per tender document annexure L
Testing / Inspection Facility
As per tender document annexure L
70
790
Kilogram
STRIP FOR 30MM CANNON
Physical Verification needed
Description
Forging Strip C1005
Specification
As per Drawings
Testing / Inspection Facility
Firm's own facility to meet OFT requirements.
70
184
Number
ST SQUARE 75 MM BS 3S144 1995 1999
Description
STEEL SQR.75 MM TO SPECN.BS:3S144:1995(1999) GD.S144 D,
TEST CONDITION S144H.
Specification
STEEL SQR.75 MM TO SPECN.BS:3S144:1995(1999) GD.S144 D,
TEST CONDITION S144H.
Manufacturing Technology
As per tender document Annexure L
Testing / Inspection Facility
As per tender document Annexure L
70
44.800
Kilogram
20mm Bolt Assembly to Drg No 44P03000 required for AMR
Physical Verification needed
Description
20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),
Specification
20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),
Testing / Inspection Facility
70
100
Number
SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR
Physical Verification needed
Description
SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR
Specification
AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
500
Number
FORGING TO DRG No 62C 7003 200 B3 WITH FIRM s MATERIAL REQUIRED FOR SEAR A7003 FOR 127 AD GUN
Physical Verification needed
Description
FORGING TO DRG No 62C 7003 200 B3 WITH FIRM'S MATERIAL REQUIRED FOR SEAR A7003 FOR 127 AD GUN
Specification
FORGING TO DRG No 62C 7003 200 B3 WITH FIRM'S MATERIAL REQUIRED FOR SEAR A7003 FOR 127 AD GUN
Drawing no.
62C 7003 200 B3
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT BY THE REPRESENTATIVE OF THE GENERAL MANAGER ON RECEIPT OF MATERIAL AT OFT STORE
70
43
Number
CONVERSION FORGING TO DRAWING NO 62C 2206 200 D2 FOR BLOCK TRUNNION A2206 MATERIAL WILL BE ISSUED BY OFT
Physical Verification needed
Description
CONVERSION FORGING TO DRAWING NO. 62C 2206 200 D2 REQUIRD FOR BLOCK TRUNNION (A2206) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT
Specification
CONVERSION FORGING TO DRAWING NO. 62C 2206 200 D2 REQUIRD FOR BLOCK TRUNNION (A2206) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT
Drawing no.
62C 2206 200 D2
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT BY THE REPRESENTATIVE OF THE GENERAL MANAGER AT OFT
70
201
Number
CONVERSION FORGING TO DRAWING NO 62C 6018 200 D3 FOR PLATE RIBBED GUIDE SLIDE A6018 MATERIAL WILL BE ISSUED BY OFT
Physical Verification needed
Description
"CONVERSION FORGING TO DRAWING NO. 62C 6018 200 D3 REQUIRED FOR PLATE RIBBED GUIDE SLIDE (A6018) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT.
"
Specification
CONVERSION FORGING TO DRAWING NO. 62C 6018 200 D3 REQUIRED FOR PLATE RIBBED GUIDE SLIDE (A6018) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT.
"
Drawing no.
62C 6018 200 D3
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT BY THE REPRESENTATIVE OF THE GENERAL MANAGER ON RECEIPT OF MATERIAL AT OFT STORE
70
166
Number
CONVERSION FORGING TO DRG NO 62C 6208 200 C3 FOR SLIDE FEED A6208 MATERIAL WILL BE ISSUED BY OFT
Physical Verification needed
Description
"CONVERSION FORGING TO DRG.NO. 62C 6208 200 C3. MATERIAL WILL BE ISSUED BY OFT
FOR SLIDE FEED (A6208)
"
Specification
AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 6208 200 C3. MATERIAL WILL BE ISSUED BY OFT
FOR SLIDE FEED (A6208).
"
Drawing no.
62C 6208 200 C3
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT BY THE REPRESENTATIVE OF THE GENERAL MANAGER ON RECEIPT OF MATERIAL AT OFT STORE
70
293
Number
CORDAGE NYLON BRAIDED 250 KG OLIVE DRAB SHADE NO 298 AS PER SPECN NO IS 5 1994
Description
CORDAGE NYLON BRAIDED 250 KG OLIVE DRAB SHADE NO. 298 AS PER SPECN NO. IS:5-1994
Specification
Specn. No. IS : 4227-1998 Variety No. 12 Except that:-
Parameters Linear Density of Yarn(Tex) Mass (g/100m)
Tolerance -5% to +17% +5% over specified
For Dyed i.e.698, max
ROLL LENGTH 285 MTR.
EX-SAMPLING
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101126454
135766
Metre
Fabrication of SD Para Pack Cover
Description
Fabrication of SD Para Pack Cover
Specification
Fabrication of SD Para Pack Cover is as per Specn. No. IND/TC/2694 with amendment 1, 2 & 3
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025032
4000
Number
Fabrication of Carrying Bag PTAM
Description
Fabrication of Carrying Bag PTAM
Specification
As per Drawing/Tech Particulars attached
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025037
1000
Number
Fabrication of Carrying Bag HAP
Description
Fabrication of Carrying Bag HAP
Specification
As per Drawing/Tech Particulars attached
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110025034
150
Number
Fabrication of Pack Cover PTAM
Description
Fabrication of Pack Cover PTAM
Specification
Drawing No. –ADRDE/1142(g)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025038
1000
Number
Fabrication of Pack Cover HAP
Description
Fabrication of Pack Cover HAP
Specification
Drawing No. - ADRDE/1283-A-3(c)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025035
150
Number
Fabrication of Bag Parachutist
Description
Fabrication of Bag Parachutist
Specification
As per Drawing/Tech Particulars attached.
Drawing No.CIT&C/TC-8/39
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025039
148
Number
Fabrication of BAG INNER PTAM
Description
Fabrication of BAG INNER PTAM
Specification
As per Drawing/Tech Particulars attached.
Drawing No.ADRDE/1143(e)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025036
1400
Number
Fabrication of BAG INNER HAP
Description
Fabrication of BAG INNER HAP
Specification
As per Drawing/Tech Particulars attached.
Drawing No.ADRDE/1283-A-4(b)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025033
1150
Number
POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050
Physical Verification needed
Description
POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050
Specification
POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050
Drawing no.
FOR VISUAL REFERENCE PURPOSE ONLY DRG NO TAR K 7050STAR
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
11664
Number
Fabric Nylon 75 GSM White PU Coated 152cms Minimum
Description
Fabric Nylon 75 GSM White PU Coated 152cms Minimum
Specification:-IND/TC/0157, "Firm Trade Mark in Abbreviated form in smallest possible letter to be printed on the uncoated side of the fabric along selvedge at an interval of one meter.The height of letter should not exceed 8mm. Dark/Bright Colour to be avoided.
Specification
Fabric Nylon 75 GSM White PU Coated 152cms Minimum
Specification:-IND/TC/0157, "Firm Trade Mark in Abbreviated form in smallest possible letter to be printed on the uncoated side of the fabric along selvedge at an interval of one meter.The height of letter should not exceed 8mm. Dark/Bright Colour to be avoided.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
144138
Metre