6321
ORDFYS/OCFAV/19-20/PV/03/076ADV1920 Date : 23.01.2020
Ordnance Clothing Factory Avadi
The General Manager,
6322
MPF/OTE/19TE211209
Machine Tool Proto Type Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
7110308047 WELDING OF TRIANGULAR STAY 4071918
Description
WELDING OF TRIANGULAR STAY,4071918.
Specification
WELDING OF TRIANGULAR STAY,4071918.
Testing / Inspection Facility
71
31
Whole job
6323
MPF/PV/MTA/JUNCTION BOXES
Machine Tool Proto Type Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
7119071026 JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM
Description
JUNCTION BOX SS 304,EX ENCLOSURE 200 X 250 X 121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.LCP ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO, SELECTOR SWITCH 0-I,2POSITION WITH 1NO+1NC,COLOUR BLACK BARTEC 07-3323-4400+05-0003-0009-1NO,SCRERWLESS TERMINALS ST 2.5 COLOUR GRAY PHOENIX 3031212-25 NOS.END PLATE PHOENIX 3030417-1NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28 NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3 NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Specification
JUNCTION BOX SS 304,EX ENCLOSURE 200 X 250 X 121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.LCP ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO, SELECTOR SWITCH 0-I,2POSITION WITH 1NO+1NC,COLOUR BLACK BARTEC 07-3323-4400+05-0003-0009-1NO,SCRERWLESS TERMINALS ST 2.5 COLOUR GRAY PHOENIX 3031212-25 NOS.END PLATE PHOENIX 3030417-1NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28 NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3 NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Testing / Inspection Facility
71
As per Requirement
Number
7119071027 JUNCTION BOX SS304 EX ENCLOSURE 330X300X121MM
Description
JUNCTION BOX SS304, EX ENCLOSURE 330X300X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40 DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.75 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,EX LABEL LAMINATED PAPER 1 NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-75 NOS. END PLATE PHOENIX 3030417-4 NOS,END CLAMP PHOENIX 3022218-4 NOS,MARKERS PHOENIX 1050017-79NOS SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-4NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Specification
JUNCTION BOX SS304, EX ENCLOSURE 330X300X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40 DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.75 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,EX LABEL LAMINATED PAPER 1 NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-75 NOS. END PLATE PHOENIX 3030417-4 NOS,END CLAMP PHOENIX 3022218-4 NOS,MARKERS PHOENIX 1050017-79NOS SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-4NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Testing / Inspection Facility
71
As per Requirement
Number
7119071028 JUNCTION BOX SS304 EX ENCLOSURE 200 X 250 X 121MM
Description
JUNCTION BOX SS304,EX ENCLOSURE 200X250X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB II C,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO. 25 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS,DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-25 NOS,END PLATE PHOENIX 3030417-2NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Specification
JUNCTION BOX SS304,EX ENCLOSURE 200X250X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB II C,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO. 25 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS,DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-25 NOS,END PLATE PHOENIX 3030417-2NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Testing / Inspection Facility
71
As per Requirement
Number
6324
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TOOL CLEANING GAS HOLE ASSY GM 5 56MM 1A1 TO DS CAT NO 4933 000796 DC I NO 26493 SA DT 22 02 10
Description
TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10
Specification
TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10
Drawing no.
DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10
Testing / Inspection Facility
As per attached document of manufacturing & testing.
70
1000
Number
6325
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PIN STRAIGHT HEADLESS GAS BLOCK
Description
PIN STRAIGHT HEADLESS GAS BLOCK TO DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION)
Specification
PIN STRAIGHT HEADLESS GAS BLOCK TO DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION)
Drawing no.
DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION
Testing / Inspection Facility
70
3000
Number
6326
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Pin grooved Headed for Hinge cover for Carbine 5 56
Description
PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16
Specification
PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16
Drawing no.
DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188
Testing / Inspection Facility
70
5000
Number
6327
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56
Description
PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016
Specification
PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016
Drawing no.
DRG NO-ARDE/SK-3146/33 DS CAT NO. 5315-030876
Testing / Inspection Facility
70
1500
Number
6328
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SPRING HELICAL TORSION FOR HAMMER
Description
SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN.TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16
Specification
SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN.TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16
Drawing no.
DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16
Testing / Inspection Facility
70
5000
Number
6329
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
WALLET EMPTY DS CAT NO 3770 060959 FOR 556 MM LMG RIFLE
Description
WALLET EMPTY (FOR 5.56MM RIFLE/LMG) TO DRG. NO. CQA(SA)SK468 , DS CAT NO. 3770-060959, SHT.1 CONSISTING OF DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(TWO SHEETS DC(I) NO. 26528-SA, DT. 26-07-10
Specification
WALLET EMPTY (FOR 5.56MM RIFLE/LMG) TO DRG. NO. CQA(SA)SK468 , DS CAT NO. 3770-060959, SHT.1 CONSISTING OF DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(TWO SHEETS DC(I) NO. 26528-SA, DT. 26-07-10
Drawing no.
DRG. NO. CQA(SA)SK468 , DS CAT NO. 3770-060959, SHT.1 CONSISTING OF DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(TWO SHEETS DC(I) NO. 26528-SA, DT. 26-07-10
Testing / Inspection Facility
71
1500
Number
6330
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TOOL REMOVING RUPTURED CARTRIDGE CASE
Description
TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10
Specification
TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10
Drawing no.
DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10
Testing / Inspection Facility
70
1000
Number
6331
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TOOL CLEANING GAS BLOCK FOR LMG 5 56 mm
Description
TOOL CLEANING GAS BLOCK TO DRG.NO.ARDE/TA/94/28 IN FINISHED CONDITION.DS CAT NO.4933-000406.DC(1)NO.26937-SA DT-9.09.16
Specification
TOOL CLEANING GAS BLOCK TO DRG.NO.ARDE/TA/94/28 IN FINISHED CONDITION.DS CAT NO.4933-000406.DC(1)NO.26937-SA DT-9.09.16
Drawing no.
DRG.NO.ARDE/TA/94/28 IN FINISHED CONDITION.DS CAT NO.4933-000406.DC(1)NO.26937-SA DT-9.09.16
Testing / Inspection Facility
70
1000
Number
6332
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TOOL ADJUSTING SIGHT ASSY
Description
TOOL ADJUSTING SIGHT TO DRG NO.ARDE /TA/94/26IN FINISHED CONDITION.DS CAT NO-4933-000404 DC(1)NO-26467-SA DTD 23.10.09
Specification
TOOL ADJUSTING SIGHT TO DRG NO.ARDE /TA/94/26IN FINISHED CONDITION.DS CAT NO-4933-000404 DC(1)NO-26467-SA DTD 23.10.09
Drawing no.
DRG NO.ARDE /TA/94/26IN FINISHED CONDITION.DS CAT NO-4933-000404 DC(1)NO-26467-SA DTD 23.10.09
Testing / Inspection Facility
70
500
Number
6333
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SPRING HELICAL COMPRESSION EXTRACTOR INNER
Description
SPRING HELICAL COMPRESSION EXTRACTOR (INNER)TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008
Specification
SPRING HELICAL COMPRESSION EXTRACTOR (INNER)TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008
Drawing no.
DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008
Testing / Inspection Facility
70
5000
Number
6334
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SLING ASSEMBLY OF BLACK COLOUR
Description
SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750
Specification
SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750
Drawing no.
DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750
Testing / Inspection Facility
72
2000
Number
6335
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
ROD CLEANING SMALL ARMS
Description
ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
Specification
ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
Drawing no.
DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
Testing / Inspection Facility
70
2000
Number
6336
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PULL THROUGH 5 point 56 MM 1A NYLON TO DS CAT NO 1005 557944 DC I NO 26532 SA DT 30 07 10
Description
PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Specification
PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Drawing no.
S CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
71
2000
Number
6337
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PIN LOCKING PIN FIRING IN FINISHED CONDITION DS CAT NO 5315 010101
Description
PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101.
Specification
PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101.
Drawing no.
DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101
Testing / Inspection Facility
70
1000
Number
6338
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER
Description
OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I) 26532SA DT.30.7.10
Specification
OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10
Drawing no.
DS CAT NO.4930-000506
Testing / Inspection Facility
71
1000
Number
6339
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
OIL BOTTLE
Description
BOTTLE OIL MK-5,DS CAT NO.4930-000797,1005-000324, 1005-000326;1005-000327,5310-002656.DC(I)NO.26423-SA DT16.06.08.
Specification
BOTTLE OIL MK-5,DS CAT NO.4930-000797,1005-000324, 1005-000326;1005-000327,5310-002656.DC(I)NO.26423-SA DT16.06.08.
Drawing no.
CAT NO.4930-000797,1005-000324, 1005-000326;1005-000327,5310-002656.DC(I)NO.26423-SA DT16.06.08.
Testing / Inspection Facility
71
500
Number
6340
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
HOOK TO DS CAT NO 5340 015108
Description
HOOK TO DRG. NO. ARDE/TA/94/27DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16
Specification
HOOK TO DRG. NO. ARDE/TA/94/27 DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16
Drawing no.
DS CAT NO 5340-015108
Testing / Inspection Facility
70
500
Number
6341
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
HAMMER PEIN BALL
Description
ENGINEERS BALL PEIN HAMMER 200 GRAMS TO I.S.:841-1983
Specification
ENGINEERS BALL PEIN HAMMER 200 GRAMS TO I.S.:841-1983
Testing / Inspection Facility
71
500
Number
6342
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
6343
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
ENGINEERS SCREW DRIVER
Description
ENGINEERS SCREW DRIVER 1.6 X 6.5 X 150 IS:844 PT-II,MAKE-TAPARIA/JHALLNI ONLY
Specification
ENGINEERS SCREW DRIVER 1.6 X 6.5 X 150 IS:844 PT-II,MAKE-TAPARIA/JHALLNI ONLY
Testing / Inspection Facility
71
1000
Number
6344
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
DRIFT PIN IN FINISHED CONDITION
Description
DRIFT PIN IN FINISHED COND. AS PER DRG. NO. ARDE/TA/94/13. DS CAT NO- 5120-007750 DC(I)26925-SA,DTD.01.09.16
Specification
DRIFT PIN IN FINISHED COND. AS PER DRG. NO. ARDE/TA/94/13. DS CAT NO- 5120-007750 DC(I)26925-SA,DTD.01.09.16
Drawing no.
ARDE/TA/94/13. DS CAT NO- 5120-007750 DC(I)26925-SA,DTD.01.09.16
Testing / Inspection Facility
70
2000
Number
6345
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812
Description
DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16.
Specification
DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16.
Drawing no.
NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16.
Testing / Inspection Facility
70
2000
Number
6346
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
COVER GUN MUZZLE
Description
COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751
Specification
COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751
Drawing no.
DS CAT NO.1005 - 560751
Testing / Inspection Facility
70
2000
Number
6347
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
COMBINATION PLIER
Description
COMBINATION PLIER TO I.S.3650:1981 TO SIZE-200MM. MAKE-TAPARIA/JHALANI ONLY
Specification
COMBINATION PLIER TO I.S.3650:1981 TO SIZE-200MM. MAKE-TAPARIA/JHALANI ONLY
Testing / Inspection Facility
71
1000
Number
6348
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Brush Cleaning Chamber
Description
Brush Cleaning Chamber, ARDE/TA/94/3 DS CAT No. 1005-007745
Specification
Brush Cleaning Chamber, ARDE/TA/94/3 DS CAT No. 1005-007745
Drawing no.
ARDE/TA/94/3 DS CAT No. 1005-007745
Testing / Inspection Facility
71
1000
Number
6349
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
BRUSH CLEANING BRACKET AND CYLINDER GAS
Description
BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.
Specification
BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.
Drawing no.
DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing.
71
1000
Number
6350
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Firing Attachment Blank ammunition DSCAT No1005 007847
Description
FIRING ATTACHMENT BLANK AMMUNITION IN FINISHED CONDITION TO DS CAT NO-1005-007847.DC(I) 26521- SA DT. 12.07.2010
Specification
FIRING ATTACHMENT BLANK AMMUNITION IN FINISHED CONDITION TO DS CAT NO-1005-007847.DC(I) 26521- SA DT. 12.07.2010
Drawing no.
DS CAT NO-1005-007847.DC(I) 26521- SA DT. 12.07.2010
Testing / Inspection Facility
70
1000
Number
6351
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
BAG TOOL SATCHEL
Description
BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010.
Specification
BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010.
Drawing no.
DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010
Testing / Inspection Facility
71
1000
Number
6352
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
ADAPTOR FOR CLN BORE
Description
ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010
Specification
ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010
Drawing no.
DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010
Testing / Inspection Facility
70
1000
Number
6353
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
MAGAZINE 30 RDS ASSY FOR LMG 5 56 MM
Description
MAGAZINE ASSEMBLY (30 ROUNDS TO DRG NO. ARDE-SK-2689/285, DS CAT NO. 1005-007961DC(I) NO. 26429-SA ,DT.19-08-08
Specification
MAGAZINE ASSEMBLY (30 ROUNDS TO DRG NO. ARDE-SK-2689/285, DS CAT NO. 1005-007961DC(I) NO. 26429-SA ,DT.19-08-08
Drawing no.
DRG NO. ARDE-SK-2689/285, DS CAT NO. 1005-007961DC(I) NO. 26429-SA ,DT.19-08-08
Testing / Inspection Facility
72
1000
Number
6354
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
USER HAND BOOK
Description
USER HAND BOOK( MANUAL) OF LMG 5.56MM
Specification
USER HAND BOOK( MANUAL) OF LMG 5.56MM
Testing / Inspection Facility
25
1000
Number
6355
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SPANNER SE 18MM
Description
SPANNER SINGLE ENDED. SIZE-18 MMSE 18 IS: 5167 MAKE-EVEREST/TAPARIA/JHALANI.
Specification
SPANNER SINGLE ENDED. SIZE-18 MMSE 18 IS: 5167 MAKE-EVEREST/TAPARIA/JHALANI.
Testing / Inspection Facility
71
1000
Number
6356
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
MONOPOD ASSY FOR LMG
Description
MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN FINISHED CONDITION (BLACK COLOUR)
Specification
MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN FINISHED CONDITION (BLACK COLOUR)
Drawing no.
DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN FINISHED CONDITION (BLACK COLOUR)
Testing / Inspection Facility
72
1000
Number
6357
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
IDENTIFICATION LIST
Description
IDENTIFICATION LIST (PARTS) LIST OF LMG5.56MM
Specification
IDENTIFICATION LIST (PARTS) LIST OF LMG5.56MM
Testing / Inspection Facility
25
1000
Number
6358
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
WIRE ROD 10MM
Description
STEEL ROUND DIA 10MM SPEC. IS:7283-1974 GD C40
Specification
STEEL ROUND DIA 10MM SPEC. IS:7283-1974 GD C40
Testing / Inspection Facility
14
500
Kilogram
6359
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TRIGGER saf matl
Description
TRIGGER IN FINISH CONDITION AS PER DRG.NO.CQA(I)393/26 WITH-OUT ANODIZE PROTECTIVE FINISH FOR FIRING DEVICE, MATERIAL TO BE SUPPLIED BY SAF THROUGH LF NO.0142032535 AGAINST BANK GUARANTEE CAT-/PT NO.1005-007703.
Specification
TRIGGER IN FINISH CONDITION AS PER DRG.NO.CQA(I)393/26 WITH-OUT ANODIZE PROTECTIVE FINISH FOR FIRING DEVICE, MATERIAL TO BE SUPPLIED BY SAF THROUGH LF NO.0142032535 AGAINST BANK GUARANTEE CAT-/PT NO.1005-007703.
Drawing no.
DRG.NO.CQA(I)393/26 WITH-OUT ANODIZE PROTECTIVE FINISH FOR FIRING DEVICE,
Testing / Inspection Facility
70
35000
Number
6360
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SS WIRE ROD DIA 10MM
Description
SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
Specification
SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
Given drawing.
2- Dimensional Inspection ,for all dimensions given
In drawing & other parameter which are mentioned
In relevant drawing.
01
1000
Kilogram
6361
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Nut Castellated Hexagon
Description
NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE
Specification
NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE
Drawing no.
DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
60000
Number
6362
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Pin Straight Headed 393 27
Description
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/27
Specification
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/27
Drawing no.
DRG.NO. CQA(I) 393/27
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
Given drawing.
2- Dimensional Inspection ,for all dimensions given
In drawing & other parameter which are mentioned
In relevant drawing
70
10000
Number
6363
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PIN STRAIGHT HEADED CQA I 393 11
Description
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/11CAT/PT.NO.5315-008698
Specification
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/11CAT/PT.NO.5315-008698
Drawing no.
DRG.NO. CQA(I) 393/11CAT/PT.NO.5315-008698
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
50000
Number
6364
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Latch Special in finished condition
Description
Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
Specification
Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
Testing / Inspection Facility
70
15000
Number
6365
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Plate Armature in finished condition 393 36
Description
PLATE ARMATURE IN FINISH CONDITION DRG.NO. CQA(I) - 393/36 TO CAT /PT NO. 6115-001170 .
Specification
PLATE ARMATURE IN FINISH CONDITION DRG.NO. CQA(I) - 393/36 TO CAT /PT NO. 6115-001170 .
Drawing no.
DRG.NO. CQA(I) - 393/36 TO CAT /PT NO. 6115-001170
Testing / Inspection Facility
70
15000
Number
6366
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Plate Armature in finished condition
Description
Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
Specification
Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
Drawing no.
Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
Testing / Inspection Facility
70
15000
Number
6367
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Testing Device Circuit Continuity 1 BAS
Description
Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429
Item Code-7012907618)
Specification
Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429
Item Code-7012907618)
Manufacturing Technology
Electrical Testing Equipment( Molding Machingh Electrical tech & Assy.,
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
1000
Number
6368
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Rivet MS Snap Head
Description
RIVET M.S. SNAP HEAD 1.59 DIA X 4.19 L TO BSS 641:1951 TABLE ...2 (CADMIUM PLATED) TO BE RIVETED ON DEVICE FIRING 1B
Specification
RIVET M.S. SNAP HEAD 1.59 DIA X 4.19 L TO BSS 641:1951 TABLE ...2 (CADMIUM PLATED) TO BE RIVETED ON DEVICE FIRING 1B
Manufacturing Technology
Machining and Cadmium Plating
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
2-Dimensional Inspection, for all dimensions given
as mentioned description/std.
70
60000
Number
6369
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PIN KEEP SPLIT FOR FIRING DEVICE
Description
PIN, KEEP SPLIT 1.19 X 12.7 (CAT. NO. GI/GA 1662).
Specification
PIN, KEEP SPLIT 1.19 X 12.7 (CAT. NO. GI/GA 1662).
Testing / Inspection Facility
70
90000
Number
6370
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
WASHER LOCK STEEL SHAKE PROOF ZINC COATED FOR FIRING DEVICE
Description
WASHER LOCK STEEL, SHAKE PROOF, ZINC COATED, INTERNAL TYPE 12,3.18 (CAT. NO.GI/GA 13715).
Specification
WASHER LOCK STEEL, SHAKE PROOF, ZINC COATED, INTERNAL TYPE 12,3.18 (CAT. NO.GI/GA 13715).
Drawing no.
CAT. NO.GI/GA 13715
Testing / Inspection Facility
70
60000
Number
6371
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PLUG FOR FIRING DEVICE 1B FOR MINE
Description
PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE
Specification
PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE
Drawing no.
DRG.NO. CQA(I)393/4
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.given drawing 2-Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
30000
Number
6372
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Screw Externally Releived Body
Description
SCREW EXTERNALLY RELEIVED BODY DRG.NO. CQA(I)-393/2 FOR DEVICE FIRING 1B FOR MINE CAT./PT.NO.5305-016658
Specification
SCREW EXTERNALLY RELEIVED BODY DRG.NO. CQA(I)-393/2 FOR DEVICE FIRING 1B FOR MINE CAT./PT.NO.5305-016658
Drawing no.
DRG.NO. CQA(I)-393/2 FOR DEVICE FIRING 1B FOR MINE CAT./PT.NO.5305-016658
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
60000
Number
6373
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB
Description
SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
Specification
SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
Drawing no.
DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
29000
Number
6374
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Square Drawn Rod of 1 4 6 35mm
Description
SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H
Specification
SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H
Testing / Inspection Facility
14
125
Kilogram
6375
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Pin Straight Headed 393 19
Description
PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
Specification
PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
Drawing no.
DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
Given drawing.
2- Dimensional Inspection ,for all dimensions given
In drawing & other parameter which are mentioned
In relevant drawing.
70
29000
Number
6376
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB
Description
BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
Specification
BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
Drawing no.
DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
29000
Number
6377
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Grip Handle Left and Right For FIRING DEVICE
Description
GRIP HANDLE(LEFT AND RIGHT) AS PER DRG.NO. CQA(I)-393/17 (LEFT) & DRG.NO. CQA(I)-393/1(RIGHT)
Specification
GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
Drawing no.
DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
Testing / Inspection Facility
Chemical and Mechanaical properities as per std.given drawing Dimesnsional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
70
29000
Set
6378
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Grip Handle Right
Description
GRIP HANDLE (RIGHT) AS PER DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126
Specification
GRIP HANDLE (RIGHT) AS PER DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126
Drawing no.
DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126
Testing / Inspection Facility
70
29000
Number
6379
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE
Description
SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659
Specification
SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659
Drawing no.
CAT./PT.NO.5305-016659
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
29000
Number
6380
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Steel Round Dia 28mm
Description
STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20
Specification
STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
14
2500
Kilogram
6381
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Pin Straight Headed CQA I 393 14
Description
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699
Specification
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699
Drawing no.
DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
Given drawing.
2- Dimensional Inspection ,for all dimensions given
In drawing & other parameter which are mentioned
In relevant drawing
70
29000
Number
6382
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SPRING HELICAL COMPRESSION CQA I 393 13
Description
SPRING HELICAL COMPRESSION DRG.NO. CQA (I) 393/13
Specification
SPRING HELICAL COMPRESSION DRG.NO. CQA (I) 393/13
Drawing no.
DRG.NO. CQA (I) 393/13
Testing / Inspection Facility
70
50000
Number
6383
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Spring Wire Dia 1 245mm
Description
SPRING WIRE DIA 1.245 MM SPEC. IS:4454 PT-1 - 1975 GRADE-2
Specification
SPRING WIRE DIA 1.245 MM SPEC. IS:4454 PT-1 - 1975 GRADE-2
Testing / Inspection Facility
10
100
Kilogram
6384
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Steel Round Dia 10mm
Description
STEEL ROUND DIA 10MM SPEC. IS:7283-1974 GD C40
Specification
STEEL ROUND DIA 10MM SPEC. IS:7283-1974 GD C40
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
14
500
Kilogram
6385
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Magnet Permanent for Firing Device
Description
Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768
Specification
Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768
Drawing no.
Drg. No. CQA(I)393/8
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
60000
Number
6386
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
BAR CONNECTING GENERATOR
Description
BAR CONNECTING GENERATOR DRG.NO. CQA(I) 393/12 CAT./PT.NO.6115-001168
Specification
BAR CONNECTING GENERATOR DRG.NO. CQA(I) 393/12 CAT./PT.NO.6115-001168
Drawing no.
DRG.NO. CQA(I) 393/12 CAT./PT.NO.6115-001168
Testing / Inspection Facility
70
47000
Number
6387
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
HR 15 Steel Size 325mm X 70mm X 1250mm
Description
STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)
Specification
STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)
Testing / Inspection Facility
14
1500
Kilogram
6388
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Bracket Supporting SAF mat
Description
BRACKET SUPPORTING TO DRG. NO. CQA (I) 393/37 WITH OUT SURFACE TREATMENT RAW MATERIAL WILL BE SUPPLIED BY SAF AGAINST BANK GUARANTEE L. F. NO. 0145007056
Specification
BRACKET SUPPORTING TO DRG. NO. CQA (I) 393/37 WITH OUT SURFACE TREATMENT RAW MATERIAL WILL BE SUPPLIED BY SAF AGAINST BANK GUARANTEE L. F. NO. 0145007056
Testing / Inspection Facility
70
15000
Number
6389
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Bracket Supporting
Description
BRACKET SUPPORTING DRG. NO.CQA(I)393/37 CAT./PT.NO-5340-014214.
Specification
BRACKET SUPPORTING DRG. NO.CQA(I)393/37 CAT./PT.NO-5340-014214.
Drawing no.
DRG. NO.CQA(I)393/37 CAT./PT.NO-5340-014214.
Testing / Inspection Facility
1) Chemical & Mechanical propertles as per std. given drawing /Specification.
2) Dimensional inspection for all dimension & given in the drawing & other parameter which are mentioned in relevant drawing/specification.
70
29000
Number
6390
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Steel Strip 3 18mm X 70mm X 1200mm
Description
STEEL STRIP 3.18MM X 70MM X 1200MM FREE CUTTING STEEL IS:4431-1978 GR 14 C14 S14 FOR BRACKET DRG.NO.CQA(I)393/37 FOR CI(A) KIRKEE (IFD).
Specification
STEEL STRIP 3.18MM X 70MM X 1200MM FREE CUTTING STEEL IS:4431-1978 GR 14 C14 S14 FOR BRACKET DRG.NO.CQA(I)393/37 FOR CI(A) KIRKEE (IFD).
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
14
1500
Kilogram
6391
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
WINDING ARMATURE FOR FIRING DEVICE
Description
WINDING ARMATURE AS PER DRG.NO.CQA (I)-393/SA-4, CAT/PT.NO.2920-002194 FOR DEVICE FIRING IB
Specification
WINDING ARMATURE AS PER DRG.NO.CQA (I)-393/SA-4, CAT/PT.NO.2920-002194 FOR DEVICE FIRING IB
Drawing no.
DRG.NO.CQA (I)-393/SA-4, CAT/PT.NO.2920-002194
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
29000
Number
6392
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Pin Staright Headed
Description
PIN STRAIGHT HEADED AS PER DRG NO.CQA(I) 393/33 FOR ARMATURE OF DEVICE FIRING 1B CAT./PT.NO.5315-008701
Specification
PIN STRAIGHT HEADED AS PER DRG NO.CQA(I) 393/33 FOR ARMATURE OF DEVICE FIRING 1B CAT./PT.NO.5315-008701
Drawing no.
DRG NO.CQA(I) 393/33 FOR ARMATURE OF DEVICE FIRING 1B CAT./PT.NO.5315-008701
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
29000
Number
6393
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Ring Retaining CQAI 39332
Description
RING RETAINING AS PER DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879 FOR ARMATURE OF DEVICE FIRING
Specification
RING RETAINING AS PER DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879 FOR ARMATURE OF DEVICE FIRING
Drawing no.
DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
29000
Number
6394
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Spring Wire Dia 0914mm
Description
SPRING WIRE DIA 0.914 MM TO SPEC. IS 4454 PART-1 1975 GR-2
Specification
SPRING WIRE DIA 0.914 MM TO SPEC. IS 4454 PART-1 1975 GR-2
Testing / Inspection Facility
18
100
Kilogram
6395
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
DIA 6MM SS WIRE ROD IS6528 1972 GR 04 CR 18 NI 10 FULLY SOFTENED FOR FIRING DEVICE
Description
DIA 6MM SS WIRE ROD IS6528-1972 GR 04 CR 18 NI 10 FULLY SOFTENED
Specification
DIA 6MM SS WIRE ROD IS6528-1972 GR 04 CR 18 NI 10 FULLY SOFTENED
Testing / Inspection Facility
Chemical & Mechanical properties as per std. given drawing Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing
01
150
Kilogram
6396
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SS WIRE ROD DIA 10MM
Description
SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
Specification
SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
Given drawing.
2- Dimensional Inspection ,for all dimensions given
In drawing & other parameter which are mentioned
In relevant drawing.
01
1000
Kilogram
6397
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SS WIRE ROD DIA 10MM
Description
SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
Specification
SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
Given drawing.
2- Dimensional Inspection ,for all dimensions given
In drawing & other parameter which are mentioned
In relevant drawing.
01
1000
Kilogram
6398
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Steel Flat 17 X 10 mm
Description
STEEL FLAT SIZE 17MM X 10MM MIDHANI GRADE SHOFT IRON-1, CHEMICAL COMPOSITION FE 99.6%, MN 0.3% MAX. CO 0.008% MAX FOR PLATE OF FIRING DEVICE
Specification
STEEL FLAT SIZE 17MM X 10MM MIDHANI GRADE SHOFT IRON-1, CHEMICAL COMPOSITION FE 99.6%, MN 0.3% MAX. CO 0.008% MAX FOR PLATE OF FIRING DEVICE
Testing / Inspection Facility
14
18000
Kilogram
