STEEL SHEET 0.9MM (20SWG) X1000X1500MM.MATL. SPECTV.STA,5V2, V2A,V2B,OR IS:1570 (PART-2/SEC-1)- 1979, 15C4 OR BS:1449 (PART 3A):1964.GD HS-12 FOR FLY OFF LEVER AS PER DRG.NO.NAD 7606/4.
Specification
STEEL SHEET 0.9MM (20SWG) X1000X1500MM.MATL. SPECTV.STA,5V2, V2A,V2B,OR IS:1570 (PART-2/SEC-1)- 1979, 15C4 OR BS:1449 (PART 3A):1964.GD HS-12 FOR FLY OFF LEVER AS PER DRG.NO.NAD 7606/4.
MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004
Specification
MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004
WASHER SPRING SINGLE COIL TYPE B STEEL ZINC PLATED (NOMINAL SIZE)6MM CAT/PT.NO.G1/5310-001434 SPECN.IS:3063:1972 & SS NO.CIGS/SS/173(D).THICKNESS OF ZINC PLATING TO IS 1573-1970 SERVICE CONDN.NO.1(GR.FE ZN 5)CHROMEPASSIVATED
WASHER SPRING SINGLE COIL TYPE B STEEL ZINC PLATED (NOMINAL SIZE)6MM CAT/PT.NO.G1/5310-001434 SPECN.IS:3063:1972 & SS NO.CIGS/SS/173(D).THICKNESS OF ZINC PLATING TO IS 1573-1970 SERVICE CONDN.NO.1(GR.FE ZN 5)CHROMEPASSIVATED
DS Cat/Sec/Part No. 43/2540.008699 Tank Drinking Water Vehicular Stainless Steel 2KL capacity mounted on Truck 2.5 Ton, 4x4 TATA LPTA-715 TC/32 BS-III as per VFJ Specification No. VFJ/VEH/TATA/006/BS-III in consultation with specification no. CQAE/2540/1612/(b) Except i) Carries on Cabin ii) PTO in GB, Veh Color (Olive Green) with Log Book
Specification
Specification No. VFJ/VEH/TATA/006/BS-III in consultation with specification no. CQAE/2540/1612/(b)
BATTERY SECONDARY LEAD ACID 12V 120AH AT 5 HRS RATE WITH SIDE TERMINAL PROTECTOR TOP COVER DRG NO CQAL 4429B DS CAT NO LV6 MT4 6140 005117 SPEC CQAL 637 C 2014
Specification
BATTERY SECONDARY LEAD ACID 12V 120AH AT 5 HRS RATE WITH SIDE TERMINAL PROTECTOR TOP COVER DRG NO CQAL 4429B DS CAT NO LV6 MT4 6140 005117 SPEC CQAL 637 C 2014
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
89
740
Number
6566
EOI/PROVISIONAL/REGULARIZATION
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)
Specification
SPECN. NO.: IS : 1376-1998 Except that :- i)In appearance Finish and other respects not defined in this Specn. the material shall conform to the corresponding sealed pattern held in the custody of the Controller, CQAT&C Kanpur. (ii) Sampling Plan & Criteria of conformity As per CQAT&C/QAI/TC-8/13. (III) ph Value should be 6.0 to 8.5 PACKING & MARKING : AS PER SCHEDULE NO. CQAT&C/PMS/36(a).
Spall Liner as per Specification No.VFJ/IRD/SML/4WD 3365/SPALL-LINER/02/A dtd. 11/10/2019 and DRG No. 6000-47-41-01/A, 6001-47-41-01/A, 6002-47-41-01/A, 6003-47-41-01/A, 6004-47-41 -01/A”. as per annexure ‘A’( Amended on 22/01/2020)
BATTERY SECONDARY LEAD ACID 12V 120AH AT 5 HRS RATE WITH SIDE TERMINAL PROTECTOR TOP COVER DRG NO CQAL 4429B DS CAT NO LV6 MT4 6140 005117 SPEC CQAL 637 C 2014
Specification
BATTERY SECONDARY LEAD ACID 12V 120AH AT 5 HRS RATE WITH SIDE TERMINAL PROTECTOR TOP COVER DRG NO CQAL 4429B DS CAT NO LV6 MT4 6140 005117 SPEC CQAL 637 C 2014
ST.SQR.65MMX2.50MTR LONG OR MULTIPLE TO SPEC.BS:3S144-1995
(1999)GD.S144 D LFVD(WITH CAL.SILICATE TREATMENT,SULPHUR-
0.015MAX,PHOSPHORUS-0.03MAX.AS PER SPCN. IS:4163-1982,INCLU.
RATING i.e.THIN/THICK-SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:
1.5-1,GLOBULAR OXIDE:2.0-1.
Specification
ST.SQR.65MMX2.50MTR LONG OR MULTIPLE TO SPEC.BS:3S144-1995
(1999)GD.S144 D LFVD(WITH CAL.SILICATE TREATMENT,SULPHUR-
0.015MAX,PHOSPHORUS-0.03MAX.AS PER SPCN. IS:4163-1982,INCLU.
RATING i.e.THIN/THICK-SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:
1.5-1,GLOBULAR OXIDE:2.0-1.
MACHINING OF CAP OF 9MM CARBINE IN FINISHED CONDITION DS CAT NO 1005-000860 DC(I)NO 26881-SA DT01.7.16 FROM IC OF CAP (MATERIAL TO BE SUPPLIED BY FACTORY AGAINST BANK GUARANTEE LF NO 0133077013)
Specification
MACHINING OF CAP OF 9MM CARBINE IN FINISHED CONDITION DS CAT NO 1005-000860 DC(I)NO 26881-SA DT01.7.16 FROM IC OF CAP (MATERIAL TO BE SUPPLIED BY FACTORY AGAINST BANK GUARANTEE LF NO 0133077013)
MACHINING OF CAP OF 9MM CARBINE IN FINISHED CONDITION DS CAT NO 1005-000860 DC(I)NO 26881-SA DT01.7.16 FROM IC OF CAP (MATERIAL TO BE SUPPLIED BY FACTORY AGAINST BANK GUARANTEE LF NO 0133077013)
Specification
MACHINING OF CAP OF 9MM CARBINE IN FINISHED CONDITION DS CAT NO 1005-000860 DC(I)NO 26881-SA DT01.7.16 FROM IC OF CAP (MATERIAL TO BE SUPPLIED BY FACTORY AGAINST BANK GUARANTEE LF NO 0133077013)
TRIGGER ASSEMBLY TO DS CAT NO 1005 006589 DC(1) NO 26375 SA DT 05/09/07 WITH DETAILS OF LATEST ISSUE INSPECTION TO BE GOVERN BY RELEVANT CLAUSES OF SPECN JSS-1005-04 2006 OF LATE ST ISSUE and ANY OTHER ACCEPTANCE CRITERIA TO BE PROVIDED BY CQA (SA) ISHAPORE
Specification
TRIGGER ASSEMBLY TO DS CAT NO 1005 006589 DC(1) NO 26375 SA DT 05/09/07 WITH DETAILS OF LATEST ISSUE INSPECTION TO BE GOVERN BY RELEVANT CLAUSES OF SPECN JSS-1005-04 2006 OF LATE ST ISSUE and ANY OTHER ACCEPTANCE CRITERIA TO BE PROVIDED BY CQA (SA) ISHAPORE
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
Fabrication of Pant Drill Cotton Navy Blue for Chanda
Specification
FABRICATION OF PANT DRILL COTTON NAVY BLUE FOR CHANDA
SPECIFICATION:
SWO PART No. 20139/70139.
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION.
Fabrication of Pant Drill Cotton Navy Blue with Patch Pocket
Specification
FABRICATION OF PANT DRILL COTTON NAVY BLUE WITH PATCH POCKET
SWO PART II No. 20064/70064.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Fabrication of Trouser Drill White Suit Danger Building for Khamaria
Specification
FABRICATION OF TROUSER DRILL WHITE SUIT DANGER BUILDING FOR KHAMARIA
SPECIFICATION:
SWO PART No. 20137.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Fabrication of Manila Shirt Drill Cotton Khaki Full Sleeve for AFK
Specification
FABRICATION OF MANILA SHIRT DRILL COTTON KHAKI FULL SLEEVE FOR AF KHADKI
SWO PART II No. 20150/70150.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Fabrication of Bush Shirt Drill Cotton Navy Blue Half Sleeve
Specification
FABRICATION OF BUSH SHIRT DRILL COTTON NAVY BLUE HALF SLEEVE
SWO PART II No. 20138/70138.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
FABRICATION OF BUSH SHIRT DRILL NAVY BLUE (IFD)
SWO PART II No. 20063.
SPECIFICATION:
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
FABRICATION OF MANILA SHIRT DRILL COTTON NAVY BLUE FULL SLEEVES
Specification
FABRICATION OF MANILA SHIRT DRILL COTTON NAVY BLUE F/S.
SWO PART II No. 20149/70149.
SPECIFICATION:
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE
PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
FABRICATION OF MANILA SHIRT DRILL COTTON NAVY BLUE HALF SLEEVE
SWO PART II No. 20148/70148.
Specification
SWO PART II No. 20148/70148.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.