OFB Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

7681

OCFAV/036ADV1920

Ordnance Clothing Factory Avadi

The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054

Name	Code	Quantity	Approx Value	Select
FABRIC UNIDIRECTIONAL 160 CM WIDTH USED IN SOFT ARMOUR PANEL SAP OF BODY ARMOUR Description FABRIC UNIDIRECTIONAL 160 CM WIDTH USED IN SOFT ARMOUR PANEL SAP OF BODY ARMOUR Specification FABRIC UNIDIRECTIONAL 160 CM WIDTH USED IN SOFT ARMOUR PANEL SAP OF BODY ARMOUR SPECIFICATION NO. : 1201909/001 FABRIC_UNIDIRECTIONAL_SPEC.pdf 036ADV1920_Amendment_1_to_Spec.pdf Drawing no. 036ADV1920_CORRIGENDUM_I.pdf Manufacturing Technology Testing / Inspection Facility	21	1160.00 Metre

7682

OCFAV/037ADV1920

Ordnance Clothing Factory Avadi

The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054

Name	Code	Quantity	Approx Value	Select
BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS Description BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS Specification BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS SPECIFICATION NO. : 1201909/002 UHMWPE_SPEC.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	21	490.00 Metre

7683

190054KVPO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
STAINLESS STEEL TUBE 125X100X830MM Description STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304. Specification STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304. Drawing no. Manufacturing Technology Testing / Inspection Facility	70	48 Number

7684

RFI/OTE/ATJ0120242/2019

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
INVESTMENT CASTING FOR SLIDE RETRACTINGTO FOR RIFLE 5 56MM INSAS Description INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.570914FOR RIFLE 5.56MM INSAS Specification INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.570914FOR RIFLE 5.56MM INSAS QAP1_IC_SLIDE_RETRACTING.pdf QAP2_IC_SLIDE_RETRACTING.pdf Drawing no. RFI SK.NO.5709*14 DRAWING_IC_SLIDE_RETRACTING.pdf Manufacturing Technology Testing / Inspection Facility	79	5109 Number

7685

T.E. NO. 190208FHFO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity
9081008167 LINK BEARING TO DRAWING NO 6289044 Description 9081008167 LINK BEARING TO DRAWING NO 6289044 Specification LINK BEARING TO DRAWING NO.6289044. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	56 Number
9081008166 SPHERICAL BEARING TO DRAWING NO Description 9081008166 SPHERICAL BEARING TO DRAWING NO Specification SPHERICAL BEARING TO DRAWING NO.6293295. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	102 Number
9081008165 BEARING TO DRAWING NO 6293496 Description 9081008165 BEARING TO DRAWING NO 6293496 Specification BEARING TO DRAWING NO.6293496. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	124 Number
9081008164 SPHERICAL BEARING TO DRAWING NO Description 9081008164 SPHERICAL BEARING TO DRAWING NO Specification SPHERICAL BEARING TO DRAWING NO.6298987. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	52 Number
9081008163 SPHERICAL BEARING TO DRAWING NO Description 9081008163 SPHERICAL BEARING TO DRAWING NO Specification SPHERICAL BEARING TO DRAWING NO.6298988. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	52 Number
9081008162 SPHERICAL BEARING TO DRAWING NO Description 9081008162 SPHERICAL BEARING TO DRAWING NO Specification SPHERICAL BEARING TO DRAWING NO.6298989. Drawing no. Manufacturing Technology Testing / Inspection Facility	90	52 Number
9081008161 LINK BEARING TO DRAWING NO 6333019 Description 9081008161 LINK BEARING TO DRAWING NO. 6333019 Specification LINK BEARING TO DRAWING NO. 6333019 Drawing no. Manufacturing Technology Testing / Inspection Facility	90	55 Number
9081008160 LINK BEARING TO DRAWING NO 6339977 Description 9081008160 LINK BEARING TO DRAWING NO 6339977 Specification LINK BEARING TO DRAWING NO. 6339977 Drawing no. Manufacturing Technology Testing / Inspection Facility	90	46 Number
9081008159 LINK BEARING TO DRAWING NO 6339978 Description 9081008159 LINK BEARING TO DRAWING NO. 6339978 Specification LINK BEARING TO DRAWING NO. 6339978 Drawing no. Manufacturing Technology Testing / Inspection Facility	90	30 Number

7686

1906010192

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
Image Intensifier Tube Physical Verification needed Description Image Intensifier Tube as per specification and drawing Specification OLF/IIT/HPSG(INV)/SPEC/01(M1)/2009-10 Drawing no. OLF/R&D/IIT/197(M1) Manufacturing Technology Manufacturing Capability MANUFACTURING_FACILITIES.pdf Testing / Inspection Facility Testing Facilities TESTING_MANUFACTURING_FACILITIES.pdf	9001120820	128 Number

7687

110180258 (VRR)

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
LEG LOOP SHACKLE Description DRG.NO.ADRDE/1381. Specification DRG.NO.ADRDE/1381. Drawing no. DRG.NO.ADRDE/1381. <div style= Manufacturing Technology Testing / Inspection Facility	2110019012	553 Number

7688

OFMK/TM/OTE/V000414519

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
HULL ELECTRICAL WIRES TO DRG NO 6795 88 CB 6101 Description HULL ELECTRICAL WIRES TO DRG NO 6795 88 CB 6101 Specification HULL ELECTRICAL WIRES TO DRG NO 6795 88 CB 6101 Drawing no. Manufacturing Technology Testing / Inspection Facility	88	8 Set

7689

OFMK/TM/V000418519 DT.19.09.2019

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
TOOLS AND ACCESSORIES 6795 93 CB6500 Description TOOLS AND ACCESSORIES 6795 93 CB6500 Specification TOOLS AND ACCESSORIES 6795 93 CB6500 Drawing no. Manufacturing Technology Testing / Inspection Facility	93	8 Set

7690

EOI/OFDC/FUNNEL/21092019

Ordnance Factory Dumdum

The General Manager,
Dum Dum
Dum Dum
Kolkata, West Bengal
700028

Name	Code	Quantity
CYLINDRICAL FUNNEL AND DIAPHRAGM ASSEMBLY IN FINISHED CONDITION DRG NO ARDE 2239 FOR RTU 2231 Description CYLINDRICAL FUNNEL AND DIAPHRAGM ASSEMBLY IN FINISHED CONDITION DRG NO ARDE 2239 FOR RTU 2231 Specification AS PER DRAWING Drawing no. DRAWING_CYLINDRICAL_FUNNEL.pdf DRAWING_DIAPHRAGM.pdf DRAWING_MAIN.pdf Manufacturing Technology Testing / Inspection Facility	62	300 Number
FUNNEL ASSEMBLY WELDING IN FINISHED CONDITION ARDE 9501 02 FOR TR 250 Description FUNNEL ASSEMBLY WELDING IN FINISHED CONDITION ARDE 9501 02 FOR TR 250 Specification AS PER DRAWING Drawing no. FUNNEL.pdf FUNNEL_ASSY_WELDING.pdf DIAPHRAM.pdf Manufacturing Technology Testing / Inspection Facility	62	300 Number
FUNNEL ASSY DET NO 57 ARDE 1947 FOR RTU 1121 Description FUNNEL ASSY DET NO 57 ARDE 1947 FOR RTU 1121 Specification AS PER DRAWING Drawing no. FUNNEL_Drawing_1.pdf ARDE_1947_DETAIL_57_SHT_2.pdf ARDE_1947_DETAIL_57_SHT_3.pdf Manufacturing Technology Testing / Inspection Facility	62	308 Number

7691

3193000646

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
PISTOL GRIP MOULDING Description PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM, DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' Specification PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM, DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' Drawing no. 0204-03-02-19-31-000-00DG Drawing_Pistol_Grip_Moulding.pdf INSERT_A.pdf INSERT_B.pdf INSERT_C.pdf INSERT_D.pdf Manufacturing Technology Testing / Inspection Facility	70	942 Number

7692

OFMK/TM/V000418919 DT.20.09.2019

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
HULL ELECTRICAL EQUIPMENT 6795 82 CB6000 KIT A Description HULL ELECTRICAL EQUIPMENT 6795 82 CB6000 KIT A Specification HULL ELECTRICAL EQUIPMENT 6795 82 CB6000 KIT A Drawing no. Manufacturing Technology Testing / Inspection Facility	82	8 Set

7693

3193000650

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
TRIGGER GUARD MOULDING for JVPC Description TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC Specification TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC Drawing no. 0204-03-03-16-26-000-00DD Drawing_Trigger_Guard_Moulding_.pdf INSERT_TRIGGER_GUARD.pdf Manufacturing Technology Testing / Inspection Facility	70	942 Number

7694

3193000649

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Barrel Cover Assembly for JVPC Consisting of Barrel Cover Moulding and Bush Barrel Cover Description Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover Specification Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover Drawing no. DRG. No. 0204-03-03-01-12-000-00DB Drawing_Barrel_Cover_Assembly.pdf Drawing_Barrel_Cover_Moulding.pdf Drawing_Bush_Barrel_Cover.pdf Manufacturing Technology Testing / Inspection Facility	70	942 Number

7695

3193000648

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
GAS CYLINDER COVER MOULDING FOR JVPC Description GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB Specification GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB Drawing no. DRG NO. 0204-03-02-00-00-001-00DB Drawing_for_Gas_Cylinder_Moulding.pdf Manufacturing Technology Testing / Inspection Facility	70	942 Number

7696

3193000647

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Retainer for JVPC Description Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC Specification Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC Drawing no. Drg. No. 0204-03-02-00-09-005-00DC RETAINER.pdf Manufacturing Technology Testing / Inspection Facility	70	2572 Number

7697

3193000645

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Buffer for JVPC Description Buffer for JVPC 5.56MM X 30MM DRG No. 0204-03-02-03-22-005-00DB Specification Buffer for JVPC 5.56MM X 30MM DRG No. 0204-03-02-03-22-005-00DB Drawing no. 0204-03-02-03-22-005-00DB Drg_Buffer_JVPC.pdf Manufacturing Technology Testing / Inspection Facility	70	942 Number

7698

OFMK/TM/OTE/V000416619

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
R H MANIFOLD 675 10 CD 120 Description R H MANIFOLD 675 10 CD 120 Specification R H MANIFOLD 675 10 CD 120 Drawing no. Array Manufacturing Technology Testing / Inspection Facility	10	41 Number

7699

3193000660

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Striker to Drg no NAD 7606 by 2 for Striker Mechanism in finished condition Description Striker to Drg. no. NAD 7606/2 DT. 03 Sep 13 for Striker Mechanism in finished condition. ARD no.2572, DT.26.07.2019. Specification Striker to Drg. no. NAD 7606/2 DT. 03 Sep 13 for Striker Mechanism in finished condition. ARD no.2572, DT.26.07.2019. Drawing no. NAD 7606/2 Striker_DRG.pdf Manufacturing Technology Testing / Inspection Facility	70	6500 Number

7700

OPF/ADVANCE VR/EOI/2019/BOAT ASSAULT ITEMS-01

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity
TAPING FABRIC WIDTH 50 MM Description TAPING FABRIC WIDTH 50 MM Specification Appendix " E" of Specn CQAE/1940/1548/g CQAE-1940_-1548-g.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	2101226004	909 Metre
COATED FABRIC FOR BUOYANCY TUBE 130 CM WIDTH MIN Description COATED FABRIC FOR BUOYANCY TUBE 130 CM WIDTH (MIN) Specification APPENDIX "A, B & C" AND CLAUSE 6.1 OF SPECN CQAE/1940/1548/g Drawing no. Manufacturing Technology Testing / Inspection Facility	9911035957	273 Metre
POLYCHLOROPRENE SYNTHETIC RUBBER NEOPRENE COATED 101 CMS MIN FOR BAFFLE WALL Description POLYCHLOROPRENE SYNTHETIC RUBBER (NEOPRENE) COATED 101 CMS (MIN) FOR BAFFLE WALL Specification Appendix " D" of Specn CQAE/1940/1548/g Drawing no. Manufacturing Technology Testing / Inspection Facility	9911035959	96 Metre
COATED FABRIC FOR FLOOR 130 CM WIDTH MIN Description COATED FABRIC FOR FLOOR 130 CM WIDTH (MIN) Specification APPENDIX "A, B & C" AND CLAUSE 6.1.1 OF SPECN CQAE/1940/1548/g Drawing no. Manufacturing Technology Testing / Inspection Facility	9911035958	162 Metre

7701

OPF/ADVANCE VR/EOI/2019/TAPE-04

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
TAPE NYLON 2 54 CM U D BS 227 KG Description TAPE NYLON 2.54 CM U/D BS 227 KG Specification DRG. NO. IS 6349-1981 IS_6349_(1981).pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786977	19273 Metre

7702

OPF/ADVANCE VR/EOI/2019/ METAL-08

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
PULLEY Description PULLEY RTU 250 Specification SPECN. NO. ADRDE/1159-A-2/SA-6(a) Drawing no. ADRDE/1159-A-2/SA-6(a) PULLEY_RTU_250_1159_A2_SA_6a.pdf Manufacturing Technology Testing / Inspection Facility	2101069001	186 Number

7703

OPF/ADVANCE VR/EOI/2019/ METAL-07

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
FEMALE COUPLING FOR CWL Description FEMALE COUPLING FOR CWL Specification DRG. NO. ADRDE/1344(b) Drawing no. DRG. NO. ADRDE/1344(b) Female_Coupling_of_CWL_ADRDE_1344(b).pdf Manufacturing Technology As per Specification Female_Coupling_of_CWL_ADRDE_1344(b).pdf Testing / Inspection Facility As per Specification Female_Coupling_of_CWL_ADRDE_1344(b).pdf	2110075039	52 Number

7704

3193000656

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CAT NO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001 Description OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CAT NO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001 Specification OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CAT NO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001 Drawing no. DS-CAT NO.4930-000799 DC(I)NO.25144-SA Oiler_Hand.pdf Manufacturing Technology Testing / Inspection Facility	70	1267 Number

7705

RFI/OTE/ATJ1720237/2019

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
INVESTMENT CASTING FOR TRIGGER OF TEAR GAS GUN Description INVESTMENT CASTING FOR TRIGGER OF TEAR GAS GUN FROM TRADE SOURCES RFI SK NO. -9093-GG/A Specification INVESTMENT CASTING FOR TRIGGER OF TEAR GAS GUN FROM TRADE SOURCES RFI SK NO. -9093-GG/A QAP_IC_TRIGGER_TGG.pdf Drawing no. RFI SK NO. -9093-GG/A IC_TRIGGER_TGG.pdf Manufacturing Technology Testing / Inspection Facility	70	1344 Number

7706

OFMK/TM/V000418619 DTD.19.09.2019

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
POWER SUPPLY SYSTEM 6795 89 CB6200 Description POWER SUPPLY SYSTEM 6795-89-CB6200 Specification POWER SUPPLY SYSTEM 6795-89-CB6200 Drawing no. Manufacturing Technology Testing / Inspection Facility	89	8 Set

7707

MPF/OTE/19TE210563

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
7133800179 PUMP BODY 54 83 004 1 Description PUMP BODY 54.83.004-1 Specification PUMP BODY 54.83.004-1 Drawing no. DRAWING.pdf Manufacturing Technology Testing / Inspection Facility	71	123 Number

7708

SML/2019/01

Vehicle Factory Jabalpur

The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009

Name	Code	Quantity
BULLET PROOF GLASSES WITH RUBBER BEADING for BP SML LF No 9413100018000 Description BULLET PROOF GLASSES WITH RUBBER BEADING BP SML 4X4 CONSISTING OF WIND SHIELD GLASS DRG. NO. LA/BPV/SML/GLASS/001 QTY-2/VEH, DRIVER & CO-DRIVER GLASS DRG. NO. LA/BPV/SML/GLASS/002 QTY-2/VEH, SIDE GLASS DRG. NO. LA/BPV/SML/GLASS/003 QTY-4/VEH, REAR GLASS DR. NO. LA/BPV/SML/GLASS/004 QTY-2/VEH & AS PER SPECIFICATION NO. VFJ/R&D/LA/SP/BPV/GLASS/SML(4X4), DATED:14/06/2019 Specification SPECIFICATION NO. VFJ/R&D/LA/SP/BPV/GLASS/SML(4X4), DATED:14/06/2019 BP_glass_specification.pdf Drawing no. (I) LA/BPV/SML/GLASS/001 (II)LA/BPV/SML/GLASS/002 (III)LA/BPV/SML/GLASS/003 & (IV)LA/BPV/SML/GLASS/004 wind_shield_glass_001.pdf Driver_and_co_driver_glass_002.pdf Side_glass_003.pdf Rear_Glass_004.pdf Manufacturing Technology Testing / Inspection Facility	90	5 Set
Run Flat System for Bullet Proofing of SML LF no 9413100008000 Description Run Flat System for Bullet Proofing of SML (4x4) Troops Carrier (Medium Truck) as per Specification No. VFJ/IRD/SML/4WD 3365 Run Flat Dt. 08/03/19. Specification Specification No. VFJ/IRD/SML/4WD 3365 Run Flat Dt. 08/03/19. SML_RFS_specification_page_1.jpg SML_RFS_specification_page_2.jpg Drawing no. Manufacturing Technology Testing / Inspection Facility	90	25 Number
Spall Liner for SML 4WD LF no 9413100009000 Description SPALL LINER AS PER SPECIFICATION NO. VFJ/IRD/SML/4WD 3365/SPALL-LINER/02 DT. 11-03-2019 and as per ANNEXURE-I Specification SPECIFICATION NO. VFJ/IRD/SML/4WD 3365/SPALL-LINER/02 DT. 11-03-2019 and as per ANNEXURE-I Drawing no. Manufacturing Technology Testing / Inspection Facility	90	05 Set

7709

128MMETT19001772

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR Description PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR Specification PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR SPEC_PLASTIC_MAGAZINE_ASSY.pdf Drawing no. K 7040 STAR Drg.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE TESTING.pdf	70	3204 Number

7710

ORDFYS/FGK/PV-19/ADV-45

Field Gun Factory Kanpur

The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
FINISH MACHINING OF RACK AS PER DRG NO D4080437 Description FINISH MACHINING OF RACK Specification FINISH MACHINING OF RACK Drawing no. D 4080437 D_4080437_Rack.jpg Manufacturing Technology Testing / Inspection Facility	72	AS PER REQUIREMENT Number

7711

OCFAV/032ADV1920

Ordnance Clothing Factory Avadi

The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054

Name	Code	Quantity	Approx Value	Select
Corrugated Box 5 ply size 420x330x375 mm Description Corrugated Box 5 ply size 420x330x375 mm Specification IS:2771(PART 1):1990 Drawing no. Manufacturing Technology Testing / Inspection Facility	20	33400 Number

7712

TE NO 190190GLPO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
900500000 Bending of Trail tube pt no iwp 1947 Description BENDING OF TRAIL TUBE TO DESIGN.NO. ILG-1452 PT.NO.IWP-1947 (STRAIGHT TRAIL TUBE FOR BENDING TO BE SUPPLIED BY GCF). Specification BENDING OF TRAIL TUBE TO DESIGN.NO. ILG-1452 PT.NO.IWP-1947 (STRAIGHT TRAIL TUBE FOR BENDING TO BE SUPPLIED BY GCF). Drawing no. Manufacturing Technology Testing / Inspection Facility	90	13 Number

7713

110190164

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
PULLEY Description PULLEY RTU 250 Specification SPECN. NO. ADRDE/1159-A-2/SA-6(a) Drawing no. ADRDE/1159-A-2/SA-6(a) PULLEY_RTU_250_1159_A2_SA_6a.pdf Manufacturing Technology Testing / Inspection Facility	2101069001	186 Number

7714

ORDFYS/FGK/PV-19/ADV-44

Field Gun Factory Kanpur

The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
RAMMER HAND PULLING BACK DEVICE AND EXTRACTOR PROJECTILE Description RAMMER HAND PULLING BACK DEVICE AND EXTRACTOR PROJECTILE Specification RAMMER HAND PULLING BACK DEVICE AND EXTRACTOR PROJECTILE Drawing no. 166-0282 176-1475 161-0551 166_282_Hand_Rammer_edit.jpg 176_1475_Pulling_Bak_Device_set_edit.jpg 161_551_Extractor_Set.jpg Manufacturing Technology Testing / Inspection Facility	76	AS PER REQUIREMENT Number

7715

110190190

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
PIN WITH PULLY Description DRG. NO.:ADRDE/1300-G(b) DRD/33/98 Specification DRG. NO.:ADRDE/1300-G(b) DRD/33/98 Drawing no. DRG. NO.:ADRDE/1300-G(b) DRD/33/98 Manufacturing Technology As per drawing/specification pin_with_pulley_ADRDE-1300-G(b).pdf Testing / Inspection Facility As per drawing/specification pin_with_pulley_ADRDE-1300-G(b).pdf	2110071016	46 Number

7716

110190186

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
TAPE NYLON 20 MM UNDYED (BS=1350 KG) MINIMUM Description SPECIFICATION NO. : ADRDE/SPECN/82. Specification SPECIFICATION NO. : ADRDE/SPECN/82. ADRDE_SPECN_82.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	2101776059	76571 Metre

7717

110190187

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
GROMMET WITH WASHER 11mm Description SPECIFICATION :DRAWING NO ADRDE/306(a) Specification SPECIFICATION :DRAWING NO ADRDE/306(a) Drawing no. Manufacturing Technology As per drawing Grommet_with_Washer_ADRDE_306_a.pdf Testing / Inspection Facility As per drawing Grommet_with_Washer_ADRDE_306_a.pdf	2110060007	3303 Number

7718

110190189

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
SWIVEL CONE WITH PLATE Description SWIVEL CONE WITH PLATE Specification DRG.NO.:ADRDE/1321(b) DRD/60/98. Drawing no. swivel_cone_with_plate_ADRDE_1321_01_b.pdf Manufacturing Technology As Per Drawing/Specification enclosed swivel_cone_with_plate_ADRDE_1321_01_b.pdf Testing / Inspection Facility As Per Drawing/Specification enclosed swivel_cone_with_plate_ADRDE_1321_01_b.pdf	2110071013	95 Number

7719

OLF/MM-2/T-1906010184

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
ITO COATING ON P GLASS OF IP33 LF 9927098599 Description ITO COATING ON PROTECTIVE GLASS AS PER DRAWING NO. Y7168653 OF IP3-3 MATERIAL WILL BE SUPPLIED BY OLF Specification ITO COATING ON PROTECTIVE GLASS AS PER DRAWING NO. Y7168653 OF IP3-3 MATERIAL WILL BE SUPPLIED BY OLF Drawing no. Y7168653 Manufacturing Technology FIRM NEEDS TO SUBMIT DETAILS OF MANUFCTURING FACILITIES FOR SUBJEC ITEM manufacturing_technology_files.docx Testing / Inspection Facility FIRM NEEDS TO SUBMIT DETAILS OF TESTING FACILITIES FOR SUBJEC ITEM testing_inspection_file.docx	99	500 Number

7720

107MMETT19002776

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL Description HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL Specification AS PER DRAWING Drawing no. CTM-0110 TO CTM-0110/6 4-CTM-0110-1_TO_6-HAMMER.pdf Manufacturing Technology Testing / Inspection Facility	70	6280 Number

7721

2019000068

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
SET FASTENER HOOK AND LOOP SYNTHETIC 19 MM WHITE Description SET FASTENER HOOK AND LOOP SYNTHETIC 19 MM WHITE SPECIFICATION- IS:8156-2014, REAFFIRMED-2014 Specification SET FASTENER HOOK AND LOOP SYNTHETIC 19 MM WHITE SPECIFICATION- IS:8156-2014, REAFFIRMED-2014 Drawing no. Manufacturing Technology AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES set_fastener_hook_loop_19_mm_white.jpg Testing / Inspection Facility AS PER ATTACHED TESTING / INSPECTION FACILITY FILES set_fastener_hook_loop_19_mm_white.jpg	21	48508 Metre

7722

107MMETT19002815

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
POWER UNIT FEED UNIT AK 630 ASSY 107 Description POWER UNIT (FEED UNIT) AK-630 ASSY.107 Specification POWER UNIT (FEED UNIT) AK-630 ASSY.107 Drawing no. 107_FEED_UNIT_-ALBUM.pdf Manufacturing Technology AS PER ATTACHMENT PM5.pdf Testing / Inspection Facility AS PER ATTACHMENT PM5.pdf	72	7 Number

7723

2019000067

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
DOUBLE LAYER BONDED POLYESTER FLEECE IN OG COLOUR 145 CM WIDTH MIN Description NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11 Specification NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	18247 Metre

7724

MPF/PV/19TE210308

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity
E MODULE HOUSING DRG NO 740 12 21 00 Description E MODULE HOUSING DRG NO 740 12 21 00 Specification E MODULE HOUSING DRG NO 740 12 21 00 19TE210308_terms_and_conditions.pdf Drawing no. DRG NO 740 12 21 00 ANNEXURE_A_FOR_THREE_ITEMS.pdf Manufacturing Technology Testing / Inspection Facility	99	600 Number
LOWER BATTERY HOUSING TO DRG NO 770 22 32 00 Description LOWER BATTERY HOUSING TO DRG NO 770 22 32 00 Specification LOWER BATTERY HOUSING TO DRG NO 770 22 32 00 19TE210308_terms_and_conditions.pdf Drawing no. DRG NO 770 22 32 00 ANNEXURE_A_FOR_THREE_ITEMS.pdf DRG_OF_LOWER_BATTERY0001.pdf Manufacturing Technology Testing / Inspection Facility	99	400 Number
UPPER BATTERY HOUSING TO DRG NO 770 22 31 00 Description UPPER BATTERY HOUSING TO DRG NO 770 220 31 00 Specification UPPER BATTERY HOUSING TO DRG NO 770 220 31 00 19TE210308_terms_and_conditions.pdf Drawing no. DRG NO 770 220 31 00 ANNEXURE_A_FOR_THREE_ITEMS.pdf DRG_OF_UPPER_BATTERY0001.pdf Manufacturing Technology Testing / Inspection Facility	99	400 Number

7725

MPF/PV/19TE210309

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity
RING NUT FOR OGIVE 155 PD TO DRG NO 140 01 13 00 BRASS BS249 Description RING NUT FOR OGIVE 155 PD TO DRG NO 140 01 13 00 BRASS BS249 Specification RING NUT FOR OGIVE 155 PD TO DRG NO 140 01 13 00 BRASS BS249 19TE210309_terms_and_conditions.pdf Drawing no. DRG NO 140 01 13 00 BRASS BS249 ANNEXURE_A.pdf DRG_OF_RING_NUT0001.pdf Manufacturing Technology Testing / Inspection Facility	99	500 Number
PIN AND HOUSING ASSEMBLY TO DRG NO 740 22 32 00 GOLD PLATTING TO SPEC IS 3266 1982 Description PIN AND HOUSING ASSEMBLY TO DRG NO 740 22 32 00 GOLD PLATTING TO SPEC IS 3266 1982 Specification PIN AND HOUSING ASSEMBLY TO DRG NO 740 22 32 00 GOLD PLATTING TO SPEC IS 3266 1982 19TE210309_terms_and_conditions.pdf Drawing no. DRG NO 740 22 32 00 GOLD PLATTING TO SPEC IS 3266 1982 ANNEXURE_A.pdf Manufacturing Technology Testing / Inspection Facility	99	360 Number
BALL AND HOUSING ASSY TO DRG NO 770 24 33 00 MATERIAL BRASS TO SPEC BS 249 Description BALL AND HOUSING ASSY TO DRG NO 770 24 33 00 MATERIAL BRASS TO SPEC BS 249 Specification BALL AND HOUSING ASSY TO DRG NO 770 24 33 00 MATERIAL BRASS TO SPEC BS 249 Drawing no. DRG NO 770 24 33 00 MATERIAL BRASS TO SPEC BS 249 Manufacturing Technology Testing / Inspection Facility	99	460 Number

7726

MPF/OTE/19TE210450

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
7110401009 WHEEL CASTING D6P MOD26 15 Description 7110401009 WHEEL CASTING D6P-MOD-26/15 Specification AS PER DRG NO. IFL-7954 DRG_FOR_ITEM_LF_7110401009.pdf Drawing no. DRG NO. IFL-7954 DRG_FOR_ITEM_LF_7110401009.pdf Manufacturing Technology Testing / Inspection Facility	71	46 Number

7727

MPF/OTE/19TE210449

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
2056191882 CASTING FOR ARC ELEVATING D6P B0106 Description 2056191882 CASTING FOR ARC ELEVATING D6P B0106 Specification AS PER DRAWING DRG_FOR_ITEM_LF_2056191882.pdf Drawing no. IFL 7324 DRG_FOR_ITEM_LF_2056191882.pdf Manufacturing Technology Testing / Inspection Facility	71	19 Number

7728

MPF/PV/19TE210307

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
MODE SELECTOR SWITCH ASSEMBLY DRG NO 740 13 23 00 Description MODE SELECTOR SWITCH ASSEMBLY DRG NO 740 13 23 00 Specification MODE SELECTOR SWITCH ASSEMBLY DRG NO 740 13 23 00 19TE210307__terms_and_conditions.pdf Drawing no. DRG NO 740 13 23 00 ANNEXURE_A0002.pdf Manufacturing Technology Testing / Inspection Facility	99	500 Number
MODE SELECTOR SWITCH MSS AND MSS HOUSING DRG NO 740 13 21 00 Description MODE SELECTOR SWITCH MSS AND MSS HOUSING DRG NO 740 13 21 00 Specification MODE SELECTOR SWITCH MSS AND MSS HOUSING DRG NO 740 13 21 00 19TE210307__terms_and_conditions.pdf Drawing no. DRG NO 740 13 21 00 ANNEXURE_A0002.pdf Manufacturing Technology Testing / Inspection Facility	99	500 Number

7729

MPF/OTE/19TE210485

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
AVIATION COMPRESSOR AK 150C ASSY TO DRG NO AK 150C 01 CB Description AVIATION COMPRESSOR AK 150C ASSY TO DRG. NO. AK 150C-01 CB Specification AVIATION COMPRESSOR AK 150C ASSY TO DRG. NO. AK 150C-01 CB Drawing no. DRAWING DWG1.pdf DWG2.pdf DWG3.pdf DWG4.pdf DWG5.pdf DWG6.pdf DWG7.pdf DWG8.pdf DWG9.pdf PART_LIST_10.pdf AK150_SPECIFICATION_11.pdf Manufacturing Technology Testing / Inspection Facility	62	40 Ample

7730

107MMETT19002782

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
SURFACE TREATMENT OPERATION VIZ NICKEL PLATING WITH COPPER UNDER COAT TO SPEC BS 1224 1970 Description SURFACE TREATMENT OPERATION VIZ: NICKEL PLATING (WITH COPPER - UNDER COAT ) TO SPEC BS: 1224-1970 FOLLOWED BY ELECTRO PHORETIC LAQUERING WITH BLACKISH TINGE WITH SOLID CONTENT 9.9 TO 13% AND PH: 5.2 TO 5.6. THICKNESS OF LAQUER 5 TO 6 MICRON ON COMP PB1, PB3, PB6, PB7, PB9, PB10, PB 15, PB23, PB 32, PB39, PB41 & CTM 0099 Specification SURFACE TREATMENT OPERATION VIZ: NICKEL PLATING (WITH COPPER - UNDER COAT ) TO SPEC BS: 1224-1970 FOLLOWED BY ELECTRO PHORETIC LAQUERING WITH BLACKISH TINGE WITH SOLID CONTENT 9.9 TO 13% AND PH: 5.2 TO 5.6. THICKNESS OF LAQUER 5 TO 6 MICRON Drawing no. Manufacturing Technology AS PER ATTACHMENT SURFACE_PM.pdf Testing / Inspection Facility AS PER ATTACHMENT SURFACE_PM.pdf	91	2690 Whole job

7731

VFJ/TATA407/2019/SL

Vehicle Factory Jabalpur

The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009

Name	Code	Quantity	Approx Value	Select
SPALL LINER Description SPALL LINER AS PER SPECIFICATION NO. VFJ/ODC/TATA407 BS-IV SPALL LINER/01 DTD. 30/01/2019, AS PER ANNEXURE A Specification SPALL LINER AS PER SPECIFICATION NO. VFJ/ODC/TATA407 BS-IV SPALL LINER/01 DTD. 30/01/2019, AS PER ANNEXURE A Spall_Liner_Specification_.pdf Annexure_A.pdf Drawing no. DRAWINGS.pdf Manufacturing Technology Testing / Inspection Facility	90	10 Set

7732

OLF/MM-2/T-1906010172

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
DIE FOR DC 382 LF NO 7552338200 Description DIE FOR DC 382 LF NO 7552338200 Specification DIE FOR DC 382 LF NO 7552338200 Drawing no. B-23/DC/62.13.326/382 Manufacturing Technology Testing / Inspection Facility	75	1 Set
BODY CASTING DC 382 LF NO 7512338200 Description BODY CASTING DC 382 LF NO 7512338200 Specification BODY CASTING DC 382 LF NO 7512338200 Drawing no. B-23/DC/62.13.326/382 Manufacturing Technology Testing / Inspection Facility	75	119 Number
BODY CASTING DC 381 LF NO 7512338100 Description BODY CASTING DC 381 LF NO 7512338100 Specification BODY CASTING DC 381 LF NO 7512338100 Drawing no. B-23/DC/74.27.436/381 Manufacturing Technology Testing / Inspection Facility	75	119 Number
DIE FOR DC 381 LF NO 7552338100 Description DIE FOR DC 381 LF NO 7552338100 Specification DIE FOR DC 381 LF NO 7552338100 Drawing no. B-23/DC/74.27.436/381 Manufacturing Technology Testing / Inspection Facility	75	1 Set

7733

OLF/MM-2/1906010180

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
MIRROR HOLDER DC 154 LF NO 9927092914 Description MIRROR HOLDER DC 154 LF NO 9927092914 Specification MIRROR HOLDER DC 154 LF NO 9927092914 Drawing no. B-21/DC/8637590/154 Manufacturing Technology Testing / Inspection Facility	99	51 Number
DIE CASTING FOR HOUSING DC 166 LF NO 7512316600 Description DIE CASTING FOR HOUSING DC 166 LF NO 7512316600 Specification DIE CASTING FOR HOUSING DC 166 LF NO 7512316600 Drawing no. B-23/DC/6212555166 Manufacturing Technology Testing / Inspection Facility	75	119 Number
DIE FOR MIRROR HOLDER DC 154 LF NO 7552115400 Description DIE FOR MIRROR HOLDER DC 154 LF NO 7552115400 Specification DIE FOR MIRROR HOLDER DC 154 LF NO 7552115400 Drawing no. B-21/DC/8637590/154 Manufacturing Technology Testing / Inspection Facility	75	1 Set
DIE FOR DC 166 LF NO 7552316600 Description DIE FOR DC 166 LF NO 7552316600 Specification DIE FOR DC 166 LF NO 7552316600 Drawing no. B-23/DC/6212555/166 Manufacturing Technology Testing / Inspection Facility	75	1 Set

7734

OLF/MM-2/T-1906010171

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
TAPE DRG NO AL6394015 LF NO 7445101481 Description TAPE DRG NO AL6394015 LF NO 7445101481 Specification TAPE DRG NO AL6394015 LF NO 7445101481 Drawing no. AL6394015 Manufacturing Technology Testing / Inspection Facility	74	47 Number

Proceed