9001121396 BNC CONNECTOR WITH CHAINED Drg No.OLF/A-1/SPECS/BNC/06 BNC CONNECTOR WITH CHAINED MAL E CAP (CHUCK-NUT TYPE) AS PER SPECIFICATION NO. OLF/A-I/SPE
CS/BNC/06
Specification
9001121396 BNC CONNECTOR WITH CHAINED Drg No.OLF/A-1/SPECS/BNC/06 BNC CONNECTOR WITH CHAINED MAL E CAP (CHUCK-NUT TYPE) AS PER SPECIFICATION NO. OLF/A-I/SPE
CS/BNC/06
9001121379 CON RF75 MCX7 PLUG RT ANGLE CON RF75 MCX7 PLUG RT ANGLE (PCB CONNECTOR) AS PER BEL PART NO. 460470120177/ OEM PART NO. MCX7-C-H-RA- CA3 (SAMTEC INC)
Specification
9001121379 CON RF75 MCX7 PLUG RT ANGLE CON RF75 MCX7 PLUG RT ANGLE (PCB CONNECTOR) AS PER BEL PART NO. 460470120177/ OEM PART NO. MCX7-C-H-RA- CA3 (SAMTEC INC)
9001121372 CMM220F.CON.10CRP CONT.AWG24TO CMM220F.CON.10CRP CONT.AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 477/ OEM PART NO. 222S10M16
(NICOMATIC)
Specification
9001121372 CMM220F.CON.10CRP CONT.AWG24TO CMM220F.CON.10CRP CONT.AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 477/ OEM PART NO. 222S10M16
(NICOMATIC)
9001121371 CMM220F.CON.16CRP CONT AWG24TO CMM220F.CON.16CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 671/OEM PART NO.222S16M16
(NICOMATIC)
Specification
9001121371 CMM220F.CON.16CRP CONT AWG24TO CMM220F.CON.16CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 671/OEM PART NO.222S16M16
(NICOMATIC)
9001121368 CON CIRS THD RP MALE SHRG CON CIRS THD RP MALE SHRG 20/4 /8 (HARNESS CONNECTOR) AS PER BEL PART NO. 461573051 014 / OEM PART NO.SHRG20P4ESH8 (AMPHENOL INTERCONNECT PVT. LTD.
Specification
9001121368 CON CIRS THD RP MALE SHRG CON CIRS THD RP MALE SHRG 20/4 /8 (HARNESS CONNECTOR) AS PER BEL PART NO. 461573051 014 / OEM PART NO.SHRG20P4ESH8 (AMPHENOL INTERCONNECT PVT. LTD.
9001121366 CMM220F.CON.20CRP CONT CMM220F.CON.20CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370768/ OEM PART NO. 222S20M16 (NICOMATIC)
Specification
9001121366 CMM220F.CON.20CRP CONT CMM220F.CON.20CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370768/ OEM PART NO. 222S20M16 (NICOMATIC)
9001121273 MATING CABLE CONNECTOR (J3) Drg No.PART NO. RM 232-030-122-6400 MATING CABLE CONNECTOR (J3) PART NO. RM 232-030-122-6400(MALE CABLE PART) AIR BORN MA
KE FOR PROXIMITY ELECTRONICS BOARD FOR IDDCA
Specification
9001121273 MATING CABLE CONNECTOR (J3) Drg No.PART NO. RM 232-030-122-6400 MATING CABLE CONNECTOR (J3) PART NO. RM 232-030-122-6400(MALE CABLE PART) AIR BORN MA
KE FOR PROXIMITY ELECTRONICS BOARD FOR IDDCA
7441122040 CON CIR BAY RP F19/1.5A Drg No.BEL P/N:461570720104 CON CIR BAY RP F19/1.5A (BEL P/N:461570720104)/ OEM PART NO. DBPU1031A019-14 9E (FISHER CONNECTORS LTD.)
Specification
7441122040 CON CIR BAY RP F19/1.5A Drg No.BEL P/N:461570720104 CON CIR BAY RP F19/1.5A (BEL P/N:461570720104)/ OEM PART NO. DBPU1031A019-14 9E (FISHER CONNECTORS LTD.)
7441121520 FILTER,RFI,FL93 FILTER,RFI,FL93 (HARNESS CONNE CTOR) AS PER BEL PART NO. 453070040 132/ OEM PART NO. M15733/49-00 06 (U.S. MICROTEK COMPONENTS U SA)
Specification
7441121520 FILTER,RFI,FL93 FILTER,RFI,FL93 (HARNESS CONNE CTOR) AS PER BEL PART NO. 453070040 132/ OEM PART NO. M15733/49-00 06 (U.S. MICROTEK COMPONENTS U SA)
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
74
48
Number
7766
3193000579
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81
Specification
STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81
ELASTIC TAPE WHITE 40 MM SPECIFICATION NO. IS:9686-1980 (RE-AFFIRMED 2017) 1) WIDTH OF ELASTIC TAPE SHALL BE 40 MM MINIMUM 2) ELASTIC TAPE SHALL BE SUPPLIED IN ROLL OF 25 METERS EACH CONTINUOUS RUNNING LENGTH WITHOUT JOINT IN BETWEEN. AS PER SCHEDULE NO. CQA(T&C)/PMS/130 AS PER RELEVANT CLAUSE OF SPECIFICATION.
Specification
ELASTIC TAPE WHITE 40 MM SPECIFICATION NO. IS:9686-1980 (RE-AFFIRMED 2017) 1) WIDTH OF ELASTIC TAPE SHALL BE 40 MM MINIMUM 2) ELASTIC TAPE SHALL BE SUPPLIED IN ROLL OF 25 METERS EACH CONTINUOUS RUNNING LENGTH WITHOUT JOINT IN BETWEEN. AS PER SCHEDULE NO. CQA(T&C)/PMS/130 AS PER RELEVANT CLAUSE OF SPECIFICATION.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
104152
Metre
7782
TE NO 190143GLPO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
CYLINDER COMPRESSED AIR,140MM DIA WATER CAPACITY
09.0 LITRES(SEAMLESS CYLINDER ONLY)FITTED WITH VALVE AND
ADAPTOR WITH HEX PROTECTION CAP FOR CHARGING HYDRO-PNEUMATIC
RECUPERATOR FOR MOBILE EQUIPMENT(ADAPTOR QUANTITY ONE NUMBER
FOR EVERY 5 CYLINDERS) **
Specification
CYLINDER COMPRESSED AIR,140MM DIA WATER CAPACITY
09.0 LITRES(SEAMLESS CYLINDER ONLY)FITTED WITH VALVE AND
ADAPTOR WITH HEX PROTECTION CAP FOR CHARGING HYDRO-PNEUMATIC
RECUPERATOR FOR MOBILE EQUIPMENT(ADAPTOR QUANTITY ONE NUMBER
FOR EVERY 5 CYLINDERS) **
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
90
36
Number
7783
107/028/PV(A)/EOI/19-20
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81
Specification
STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81
STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS
IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81
Specification
STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS
IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81
STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS
IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81
Specification
STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS
IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81
COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)
Specification
COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)
STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81
Specification
STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81
COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )
Specification
COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )