COMPRESSOR 765 78 CD6

COMPRESSOR 765 78 CD6

COOLING TANK TO DRG NO SB 117/50 WITHOUT PUMP VK-524 A-T2, ELECTRIC MOTOR DM 132 SV- 40 M5 380 V, 55 KW AND CONNECTOR COUPLING H 48547 H 48 54714000-17 WITH PUMP UNIT AK-630 Assy. 117/50 SB

As per Drawing

• as per attachment

• as per attachment

BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432

BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432

TEND 1295STR

CLOTH DRILL COTTON DARK GREY 142 CMS WIDTH MINIMUM EXCLUDING SELVEDGES TO SPECIFICATION NO.VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2014

NO.VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2014

POWER UNIT (FEED UNIT) AK-630 ASSY.107

POWER UNIT (FEED UNIT) AK-630 ASSY.107

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PROV.SPECIFICATION No. PROV/S/2599/TC-11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE SUITABLE YARN COUNT MAY BE USED IN WARP &WEFT IN 3/1 TWILLWEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH L& FINISH &CLAUSENo.16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA(T&C)/PMS/35(d),except that the fabric shall be supplied in Roll form only

PROV.SPECIFICATION No. PROV/S/2599/TC-11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE SUITABLE YARN COUNT MAY BE USED IN WARP &WEFT IN 3/1 TWILLWEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH L& FINISH &CLAUSENo.16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA(T&C)/PMS/35(d),except that the fabric shall be supplied in Roll form only

MBEU/7074 PA -- HARDSHELL CONTAINER FOR JAGUAR PILOT PARA.

DRG. NO. ADRDE/1454-00(b)

DRG. NO. ADRDE/1454-00(b)

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

FABRI.&MACH.OF WHEEL BEAM 2025040.

FABRI.&MACH.OF WHEEL BEAM 2025040.

BOAT TAIL ANODISING FROM TRADE

BOAT TAIL ANODISING FROM TRADE

155-1150

WATER PROOF BOXES FIBRE BOARD RIGID CORRUGATED TRIPLE WALL 7 PLY 700X450X400 MM

CQA(GS)/US/460

Water Proof Boxes Fibre Board Rigid Corrugated Triple Wall 7 Ply 700X450X450mm.

CQA(GS)US/460

HOUSING SIGHT REAR FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 15 28 003 00DD

HOUSING SIGHT REAR FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 15 28 003 00DD

0204 03 02 15 28 003 00DD

HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'

HDPE DOT PRINTED FUSIBLE INTERLINING FABRIC 90 CM ANNEXURE 'C' OF OCFAV/GARMENT 001/(b) PACKING AND MARKING AS PER CQA(T&C) , KANPUR SCHEDULE NO CQA(T&C)/PMS/35 D EXCEPT THAT A ) FABRIC IN ROLL FORM SHALL NOT BE ( LESS THAN 40 MTRS IN RUNNING LENGTH WITHOUT STITCH/BASTING IN BETWEEN B) ROLL WEIGHT SHALL NOT EXCEED 50 KGS C) EACH ROLL OF FABRIC SHALL BE WRAPPED SEPARATELY WITH POLYPROPYLENE PLAIN SHEET. FINAL PCKING OG 2 ROLLS IN ONE WP GUNNY/HDPE SHEET D) DIM FOR PAPER TUBES OF FABRIC ROLL : OUTER DIA 3.5 CM INNER 2.5CM THICKNESS 0.5CM E) FABRIC SELVEDGE SHALL BE WOVEND EVENLY AT ONE EDGE . SAMPLING PLAN : AS PER ANNEXURE 'A'

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

AS PER APPENDIX 'B" OF PROV. SPECIFICATION NO. IND/TC/4587(d) AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER CQA(T&C) KANPUR QAI NO.CQA (T&C)/QAI/99 TC-11

AS PER APPENDIX 'B" OF PROV. SPECIFICATION NO. IND/TC/4587(d) AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER CQA(T&C) KANPUR QAI NO.CQA (T&C)/QAI/99 TC-11

PULLEY RTU

DRG.NO. ADRDE/ 1041-A-2/SA-1(c)

DRG.NO. ADRDE/ 1041-A-2/SA-1(c)

A4/1670-000125 TRIANGULAR "D" RING FOR CARGO PARACHUTE.

SPECIFICATION NO.:JSS:1670-03:2016 (third revision)

TAPE NYLON 66, 26 MM BS 550 KGF

ADRDE/Specn/2000/54(d)

ADRDE/Specn/2000/54(d)

POLYESTER MESH INTERLINING FABRIC OG 142 CM WIDTH EXCLUDING SELVEDGES AS PER SPECIFICATION ATTACHED

As per specification attached

LIGHT FILTER (FINISHED) TO DRG. NO. BTS7222011 OF K10T

LIGHT FILTER (FINISHED) TO DRG. NO. BTS7222011 OF K10T

RETICLE FOR VISOR TO DRG. NO. NO. AL7213087

RETICLE FOR VISOR TO DRG. NO. NO. AL7213087

PLATE (FINISHED) AS PER DRG.NO. 15732400007 FOR BPK-II

PLATE (FINISHED) AS PER DRG.NO. 15732400007 FOR BPK-II

LIGHT CONDUCTOR (FINISHED) TO DRAWING NO. Y-7195224

LIGHT CONDUCTOR (FINISHED) TO DRAWING NO. Y-7195224

LIGHT FILTER ASSY (FINISHED) TO DRAWING NO. Y-4418522

LIGHT FILTER ASSY (FINISHED) TO DRAWING NO. Y-4418522

MIRROR FINISHED TO DRG. NO. BSH7230073

MIRROR FINISHED TO DRG. NO. BSH7230073

SUCTION PUMP ASSY 172-46-002-SB-1

SUCTION PUMP ASSY 172-46-002-SB-1

172-46-002-SB-1

As per specification / Drawings

As per specification / Drawings

As per specification / Drawings

As per specification / Drawings

METALLIC CASE TO SINGLE SPTA LF NO 7446008099

METALLIC CASE TO SINGLE SPTA LF NO 7446008099

U-42.75.024

LENS FOR GOGGLES(ALL TERRAIN) AS PER DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C),SHT. 4 OF 4 WITH MICRO FIBER CLEANING CLOTH OF SIZE 20 CM X 20 CM MADE OF 100% POLYESTER IN BLACK COLOUR. DETAILED SPECN. FOR LENS AS PER ANNEXURE.

LENS FOR GOGGLES(ALL TERRAIN) AS PER DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C),SHT. 4 OF 4 WITH MICRO FIBER CLEANING CLOTH OF SIZE 20 CM X 20 CM MADE OF 100% POLYESTER IN BLACK COLOUR. DETAILED SPECN. FOR LENS AS PER ANNEXURE.

CQA(GS)/PROV/GS-5/1/2012(C),SHT. 4 OF 4

FRAME FOR GOGGLES(ALL TERRAIN) AS PER DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.2 OF 4, WITH ELASTIC TAPE INCLUDING PIN & BUCKLE(COMPLETE) DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.3 OF 4. DETAILED SPECN. FOR FRAME & ELASTIC TAPE AS PER ANNEXURE.

FRAME FOR GOGGLES(ALL TERRAIN) AS PER DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.2 OF 4, WITH ELASTIC TAPE INCLUDING PIN & BUCKLE(COMPLETE) DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.3 OF 4. DETAILED SPECN. FOR FRAME & ELASTIC TAPE AS PER ANNEXURE.

DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.2 OF 4, DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.3 OF 4.

Contact Set, BL6620167

BL6620167

BL6620167

Contact Set, BL6620117

BL6620117

BL6620117

Plate BL7777008

BL7777008

BL7777008

PLATE LF NO 7420111008

PLATE LF NO 7420111008

BL7777007

RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B

AS PER DRAWING

M 8194-B

10 types of finished components as per drawing for HR Bino

10 types of finished components as per drawing for HR Bino attached

TE 190261DLFO CAN LUBRICATOR OIL TOOLS ACCESSORIES

TE 190261DLFO CAN LUBRICATOR OIL TOOLS ACCESSORIES

TE 190261DLFO OIL CAN TO DRG NO 5018449

TE 190261DLFO OIL CAN TO DRG NO 5018449

TE 190261DLFO OIL CAN TO DRG NO 5018449

TE 190261DLFO OIL CAN TO DRG NO 5018449

BRAKE LINING WITHOUT CHAMFER TO DRG NO 5047799

BRAKE LINING WITHOUT CHAMFER TO DRG NO 5047799

5047799

SPRING 765 33 CD107

SPRING 765 33 CD107

TRIGGER FORGING AS PER RFISK.NO.7057*-S FOR RIFLE 5.56MM INSAS

TRIGGER FORGING AS PER RFISK.NO.7057*-S FOR RIFLE 5.56MM INSAS

RFISK.NO.7057*-S

HAMMER WITH PINS TO RFI DRG. NO. PAG-0060 FOR 12 BORE MODIFIED PUMP ACTION GUN.

HAMMER WITH PINS TO RFI DRG. NO. PAG-0060 FOR 12 BORE MODIFIED PUMP ACTION GUN.

RFI DRG. NO. PAG-0060

BUSH TO PART NO BOF 6115890

BUSH TO PART NO BOF 6115890

• BUSH TO PART NO BOF 6115890

• BUSH TO PART NO BOF 6115890

BUSH BOF 6104225 Y

BUSH BOF 6104225 Y

• BUSH BOF 6104225 Y

• BUSH BOF 6104225 Y

BUSH BOF 6164802

BUSH BOF 6164802

• BUSH BOF 6164802

• BUSH BOF 6164802

BUSH TO DRG NO 5060095 5060095 Y

BUSH TO DRG NO 5060095 5060095 Y

• BUSH TO DRG NO 5060095 5060095 Y

• BUSH TO DRG NO 5060095 5060095 Y

THREAD SEWING NYLON V. NO. H2 106N U/D SPECIFICATION NO. IS:4229-1992

SPECIFICATION NO. IS:4229-1992

SEWING THREAD SPUN POLYESTER OG

SPECN NO:IND/TC/0296(b)EXCEPT FORLENGTH/KG (min)(m)-12800, COUNT OF YARN 250 DTEX X3. BREAKING LOAD (MIN)-(50 CM. BETWEEN GRIPS)-23000 MN.FINAL TWIST IS Z PACKING & MARKING : AS PER SCHEDULE NO.CQAT&C/PMS/36(a)

• As Per Specification/Drawing

• As Per Specification/Drawing

COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)

SPECN. NO.: IS : 1376-1998 Except that :- i)In appearance Finish and other respects not defined in this Specn. the material shall conform to the corresponding sealed pattern held in the custody of the Controller, CQAT&C Kanpur. (ii) Sampling Plan & Criteria of conformity As per CQAT&C/QAI/TC-8/13. (III) ph Value should be 6.0 to 8.5 PACKING & MARKING : AS PER SCHEDULE NO. CQAT&C/PMS/36(a).

Fabric cotton grey mercerized, 95- 117 gsm.

ADRDE/QMS/TGTE/F/2019/04 dated :-17/05/2019 Except that: (i) “The roll length is specified as minimum 100 mtr.” (ii) Fabric width 94 cm.

ADRDE/QMS/TGTE/F/2019/04 dated :-17/05/2019 Except that: (i) “The roll length is specified as minimum 100 mtr.” (ii) Fabric width 94 cm.

• As per Specification/Drawing

• As per Specification/Drawing

ROD PISTON TO DRG. NO BOF-4020756

ROD PISTON TO DRG. NO BOF-4020756

HDPE DOT COATED I/L FABRIC 150 CM

IND/TC/2089(a)

CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY)

CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY)

MCT-1682/1

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 45 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 45 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 40 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC PLASTIC SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 40 CMS WHITE, SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC (PLASTIC) SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 35 CMS WHITE. SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

SYNTHETIC (PLASTIC) SLIDE FASTENERS SPECIAL PURPOSE CLOSED END MEDIUM SIZE 35 CMS WHITE. SPECN: IS:14181 (Part 1 TO 3):2002, AMDT NO. 2, REAFFIRMED 2013 AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER RELEVANT CLAUSE OF SPECIFICATION

BUSH TO DRG NO 9-A-621.05.015

BUSH TO DRG NO 9-A-621.05.015

• AS PER ATTACHMENT

• AS PER ATTACHMENT

LASER ROD (FINISHED) (LF-7420100019)

AS PER DRAWING NO. BL7207003

HEAD MIRROR(THERMAL) FINISHED AS PE DRG NO 096702000000070 (LF 2690000165)

HEAD MIRROR(THERMAL) FINISHED AS PE DRG NO 096702000000070 (LF 2690000165)

FRONT THERMAL WINDOW COMMANDER'S CUPOLA(FINISHED) AS PER DRG NO 096700000000088 (LF 2690000164)

FRONT THERMAL WINDOW COMMANDER'S CUPOLA(FINISHED) AS PER DRG NO 096700000000088 (LF 2690000164)

9081008164 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6298987.

9081008163 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6298988.

RUNNER TO DRAWING NO 6348599

RUNNER TO DRAWING NO 6348599

RUNNER TO DRAWING NO 6358868

RUNNER TO DRAWING NO 6358868

LENS-3 FOR DTI OF T-90 / 138100000201 G09

LENS-3 FOR DTI OF T-90 / 138100000201 G09

LENS-2 FOR DTI OF T-90 TANK / 138100000201 G08

LENS-2 FOR DTI OF T-90 TANK / 138100000201 G08

LENS-1 FOR DTI OF T-90 / 138100000201 G07

LENS-1 FOR DTI OF T-90 / 138100000201 G07

HEAD WINDOW(THERMAL) AS PER DRG NO 096702000000072 (LF 2690000163)

HEAD WINDOW(THERMAL) AS PER DRG NO 096702000000072 (LF 2690000163)

IND/TC/4552 (M) & Approved Sample

IND/TC/4552 (M) & Approved Sample

GROMMET WITH WASHER 11 MM

DRAWING NO ADRDE/306(b)

DRAWING NO ADRDE/306(b)

• As per Drawing

• As per Drawing

SINGLE ROW BALL BEARING , SIZE :10X21X5MM , ACCURACY CLASS-O STEEL CAGE, OPEN TYPE(RUSSIAN.SPEC.-970700, ETY-100/3), L.F.NO.9927081745

SINGLE ROW BALL BEARING , SIZE :10X21X5MM , ACCURACY CLASS-O STEEL CAGE, OPEN TYPE(RUSSIAN.SPEC.-970700, ETY-100/3), L.F.NO.9927081745

BEARING 6-1000084

BEARING 6-1000084

ALUMINIUM(CASTING)FOR YOKE BODY TO DRG.NO.GCF-MN-5438(C) (REF: DS CAT.NO.1015-001730.) ATHY: EP:7084100000 EXT:20180269 DT:24/04/2018 ORDQTY:176.00 REQ-QTY:176.00 REQUIRED FOR:-EQUIPMENT,120MM,MOR,E1 COMPLETE. DRG-NO: M1/1015-001573

ALUMINIUM(CASTING)FOR YOKE BODY TO DRG.NO.GCF-MN-5438(C) (REF: DS CAT.NO.1015-001730.) ATHY: EP:7084100000 EXT:20180269 DT:24/04/2018 ORDQTY:176.00 REQ-QTY:176.00 REQUIRED FOR:-EQUIPMENT,120MM,MOR,E1 COMPLETE. DRG-NO: M1/1015-001573

ALUMINIUM CASTING BRACKET SIGHT TO DRG NO GCF MN 5442 B REF DS CAT NO 1015 001776

ALUMINIUM CASTING BRACKET SIGHT TO DRG NO GCF MN 5442 B REF DS CAT NO 1015 001776

ALUMINIUM CASTING FOR SHOCK ABSORBER CONNECTING NUT TO DRG. NO.GCF MN-5435(C) (REF. DS CAT.NO.5310-001886.) ATHY: EP:7084100000 EXT:20180269 DT:24/04/2018 ORDQTY:176.00 REQ-QTY:182.00 REQUIRED FOR:-EQUIPMENT,120MM,MOR,E1 COMPLETE. DRG-NO: M1/1015-001573

ALUMINIUM CASTING FOR SHOCK ABSORBER CONNECTING NUT TO DRG. NO.GCF MN-5435(C) (REF. DS CAT.NO.5310-001886.) ATHY: EP:7084100000 EXT:20180269 DT:24/04/2018 ORDQTY:176.00 REQ-QTY:182.00 REQUIRED FOR:-EQUIPMENT,120MM,MOR,E1 COMPLETE. DRG-NO: M1/1015-001573

ALUMINIUM CASTING FOR ADJUSTMENT HAND WHEEL TO DRG NO GCF MN 5434 B REF DS CAT NO 1015 001729

ALUMINIUM CASTING FOR ADJUSTMENT HAND WHEEL TO DRG NO GCF MN 5434 B REF DS CAT NO 1015 001729

ALUMINIUM CASTING FOR HAND WHEEL TO DRG NO GCF MN 5433 D DS CAT NO 5340 014506

ALUMINIUM CASTING FOR HAND WHEEL TO DRG NO GCF MN 5433 D DS CAT NO 5340 014506

ALUMINIUM CASTING FOR HANDWHEEL KNOB (RT).TO DRG.NO.GCF MN- 5431(C)( REF DRG.NO.,DS CAT.NO.1015-001718.).

ALUMINIUM CASTING FOR HANDWHEEL KNOB (RT).TO DRG.NO.GCF MN- 5431(C)( REF DRG.NO.,DS CAT.NO.1015-001718.).