7521
LMMT/2019/01
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
Name
Code
Quantity
Approx Value
Select
LPTA Forging for Drive Shaft
Description
Forging for Drive Shaft Drg No 322 2820 301 50 ( R1)
Specification
Forging for Drive Shaft Drg No 322 2820 301 50 ( R1)
Drawing no.
322 2820 301 50 R1
Testing / Inspection Facility
90
250
Number
LPTA Forging for Coupling Flange RXL
Description
Forging for Coupling Flange Part No 2730 3530 5001 3
Specification
Forging for Coupling Flange Part No 2730 3530 5001 3
Drawing no.
2730 3530 5001 3
Testing / Inspection Facility
90
250
Number
LPTA Forging for Coupling Flange AGB
Description
Forging for Coupling Flange DRG No 312 262 2045 3 (A)
Specification
Forging for Coupling Flange DRG No 312 262 2045 3 (A)
Drawing no.
312 262 2045 3 (A)
Testing / Inspection Facility
90
250
Number
LPTA Forging for Counter Shaft AGB
Description
Forging for Counter Shaft Drg No 322 2830 102 50
Specification
Forging for Counter Shaft Drg No 322 2830 102 50
Drawing no.
322 2820 0102 50
Testing / Inspection Facility
90
250
Number
7522
110190232
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
LOCK OCK WITH BUCKLE
Description
LOCK OCK WITH BUCKLE
Specification
ADRDE/1354.
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110069032
136
Number
7523
110190226
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
FEMALE COUPLING FOR CWL
Description
FEMALE COUPLING FOR CWL
Specification
DRG. NO. ADRDE/1344(b)
Drawing no.
DRG. NO. ADRDE/1344(b)
Testing / Inspection Facility
2110075039
52
Number
7524
OLF/M-2/Thermistor/Tele-communication/2019
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
THERMISTOR, TOC-MD-5.75K +-0.7K SPECNNO:AV4681027TY (LF 9001120392)
Description
THERMISTOR, TOC-MD-5.75K +-0.7K SPECNNO:AV4681027TY (LF 9001120392)
Specification
THERMISTOR, TOC-MD-5.75K +-0.7K SPECNNO:AV4681027TY (LF 9001120392)
Testing / Inspection Facility
90
534
Number
THERMISTOR TOC D 9927091329
Description
Drg No.SPECN.NO-AB4.681.025/028TY THERMISTER-TOC-D SPECN. NO-AB4 .681.025/028 TY
Specification
Drg No.SPECN.NO-AB4.681.025/028TY THERMISTER-TOC-D SPECN. NO-AB4 .681.025/028 TY
Testing / Inspection Facility
99
418
Number
LPTA Forging for Gear Front
Description
Forging for Gear Front Drg No 312 282 2211 50 R1
Specification
Forging for Gear Front Drg No 312 282 2211 50 R1
Testing / Inspection Facility
90
250
Number
LPTA Forging for Drive Shaft Front Axle
Description
Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1
Specification
Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1
Drawing no.
322 2830 0605 3 R1
Testing / Inspection Facility
90
250
Number
7525
STLTR/02
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
Name
Code
Quantity
Approx Value
Select
SHAFT SEAL X2703800V2
Testing / Inspection Facility
90
300
Number
SHAFT SEAL Pt No X2703600
Drawing no.
Pt.No. X2703600#
Testing / Inspection Facility
90
600
Number
SHAFT SEAL PT No X2703400 B
Description
SHAFT SEAL, PT.NO. X2703400(B),
Specification
SHAFT SEAL, PT.NO. X2703400(B),
Testing / Inspection Facility
90
300
Number
SHAFT SEAL Pt No X2703500
Drawing no.
Pt.No. X2703500
Testing / Inspection Facility
90
300
Number
OIL SEAL Pt No F2752700
Drawing no.
Pt.No. F2752700
Testing / Inspection Facility
90
2400
Number
OIL SEAL X2701400V1
Specification
OIL SEAL-AGB
Drawing no.
Pt.No. X2701400-V1
Testing / Inspection Facility
90
600
Number
OIL SEAL Pt No F2701400V1
Drawing no.
Pt.No. F2701400-V1
Testing / Inspection Facility
90
300
Number
OIL SEAL AGB Pt No X2702200
Drawing no.
Pt.No. X2702200
Testing / Inspection Facility
90
150
Number
TAPER ROLLER BRG 683 672
Description
TEPER ROLLER BRG. (683/672)
Specification
TEPER ROLLER BRG. (683/672)
Drawing no.
Pt.No. F0233010-2, ALT Pt.No.F0214410
Testing / Inspection Facility
90
300
Number
TAPER ROLLER BRG 580 572
Description
TAPER ROLLER BRG.(580/572)
Specification
TAPER ROLLER BRG.(580/572)
Drawing no.
Pt.No. F0230110#, ALT Pt.No. F0214310
Testing / Inspection Facility
90
300
Number
ROL BRG INNER 33019
Description
ROL BRG. INNER(33019)
Specification
ROL BRG. INNER(33019)
Drawing no.
Pt.No. X0202310
Testing / Inspection Facility
90
300
Number
NEEDL ROLLER BRG
Description
NEEDL ROLLER BRG NK 55/35
Specification
NEEDL ROLLER BRG NK 55/35
Drawing no.
Pt.No. X0202410
Testing / Inspection Facility
90
300
Number
NEEDLE ROLLER 3 X 15 8 BR
Description
NEEDLE ROLLER 3 X 15.8 BR
Specification
NEEDLE ROLLER 3 X 15.8 BR
Drawing no.
Pt.No. F4300310-A
Testing / Inspection Facility
90
40800
Number
NEEDLE ROLLER 3 X 17 8 BR
Description
NEEDLE ROLLER 3 X 17.8 BR
Specification
NEEDLE ROLLER 3 X 17.8 BR
Drawing no.
F4300310-A, Pt.No. F4300410-A
Testing / Inspection Facility
90
40800
Number
ROL BRG OUTER SKF 30217
Description
ROL BRG.OUTER SKF-30217
Specification
ROL BRG.OUTER SKF-30217
Testing / Inspection Facility
90
300
Number
CYL ROLLER BRG NS 1911
Description
CYL.ROLLER BRG.(NS-1911)
Specification
CYL.ROLLER BRG.(NS-1911)
Testing / Inspection Facility
90
300
Number
NEEDLE ROLLER BRG MF5030
Description
NEEDLE ROLLER BRG. MF-5030(50X38X30)
Specification
NEEDLE ROLLER BRG. MF-5030(50X38X30)
Testing / Inspection Facility
90
600
Number
CYL ROLLER BEARING NJ2209EM
Description
CYL.ROLLER BEARING NJ2209EM
Specification
CYL.ROLLER BEARING NJ2209EM
Drawing no.
X3548915-C, F0243810#
Testing / Inspection Facility
90
300
Number
NEEDLE ROLLER BRG NK90 25
Description
NEEDLE ROLLER BRG. NK90/25
Specification
NEEDLE ROLLER BRG. NK90/25
Testing / Inspection Facility
90
150
Number
ROLLER BEARING NJ2210E
Description
ROLLER BEARING NJ2210E
Specification
ROLLER BEARING NJ2210E
Testing / Inspection Facility
90
150
Number
BALL BEARING 6210
Description
BALL BEARING 6210
Specification
BALL BEARING 6210
Testing / Inspection Facility
90
300
Number
ROLLER BEARING L 064
Description
ROLLER BEARING L 064
Specification
ROLLER BEARING L 064
Testing / Inspection Facility
90
150
Number
ROLLER BRG NJ212E
Description
ROLLER BRG. NJ212E
Specification
ROLLER BRG. NJ212E
Testing / Inspection Facility
90
150
Number
7526
110190231
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
CANVAS NYLON 425 GM GREY WIDTH 105 CM
Description
CANVAS NYLON 425 GM GREY WIDTH 105 CM
Specification
SPECN-ADRDE/SPECN/1984/23(b)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101126375
704
Metre
7527
TE 190146L7FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
SHEAVE OUTER TO PART NO 4018739
Description
SHAVE OUTER TO PART NO 4018739
Specification
SHAVE OUTER TO PART NO 4018739
Manufacturing Technology
SHEAVE OUTER TO PART NO 4018739
Testing / Inspection Facility
SHEAVE OUTER TO PART NO 4018739
90
25
Number
7528
RFI/OTE/ATJ0820268/2019
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
BREECH SLIDE LOCK FOR 12 BORE PAG
Description
BREECH SLIDE LOCKFOR 12 BORE PAG
Specification
BREECH SLIDE LOCKFOR 12 BORE PAG
Testing / Inspection Facility
70
1211
Number
7529
110190230
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
DUCK NYLON 230 GM STEEL GREY 91point4 CM WIDTH
Description
DUCK NYLON 230 GM STEEL GREY 91.4 CM WIDTH
Specification
SPECN.NO.ADRDE/SPECN./1984/23(d)
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101142715
668
Metre
7530
110190224
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
RIP CORD LARGE ADRDE 282 d
Description
RIP CORD LARGE
Specification
ADRDE/282(d)
Testing / Inspection Facility
2110005015
187
Number
7531
RFI/OTE/ATJ0120263/2019
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
INVESTMENT CASTING HINGE COVER FOR INSAS
Description
INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER.FOR RLFLE 5.56MM INSAS
Specification
INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER.FOR RLFLE 5.56MM INSAS
Drawing no.
RFI SK. NO. 6097*12
Testing / Inspection Facility
70
5583
Number
7532
OFMK/TM/V000422319 DT.28.10.2019
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
Name
Code
Quantity
Approx Value
Select
POWER SUPPLY SYSTEM 6795 89 CB6250 WITHOUT BATTERY
Description
POWER SUPPLY SYSTEM 6795 89 CB6250 WITHOUT BATTERY
Specification
POWER SUPPLY SYSTEM 6795 89 CB6250 WITHOUT BATTERY
Testing / Inspection Facility
89
8
Set
7533
T.E. NO.190245FHPO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
CASTOR WHEEL ASSY TO PART NO.1132630
Description
CASTOR WHEEL ASSY TO PART NO.1132630
Specification
CASTOR WHEEL ASSY TO PART NO.1132630
Testing / Inspection Facility
90
17
Number
7534
190129P9FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
CASE INSTRUMENT STAND 2A CLEANING ROD 3A V5 1240 000336
Description
CASE INSTRUMENT STAND 2A & CLEANING ROD 3A,V5/1240-000336.
Specification
CASE INSTRUMENT STAND 2A & CLEANING ROD 3A,V5/1240-000336.
Testing / Inspection Facility
90
191
Number
7535
190131P9FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
7536
OCFAV HDPE
Ordnance Clothing Factory Avadi
The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
HDPE Dot coated Printed Fusible Interlining Fabric 150 cm as per OCFA Specification
Description
HDPE Dot coated Printed Fusible Interlining Fabric 150 cm
Specification
1) Raw Material : 100% Cotton
2) Count (Warp & Weft) : 30s
3) Ends per Inch : 76+/- 5
4) Picks per Inch : 76 +/- 5
5) Width : 150 cm (Min)
6) Weave : Plain
7) Coating : HDPE
8) Colour : White
9) GSM : 148 +5/-2.5%
10) Shrinkage % : As per Appendix A of IND/TC/2089(a)
11) Bond Strength (Kgs) : > 2.0 As per IND/TC/2089(a)
12) Packing & Marking : As per CQA(T&C) Kanpur Schedule No. CQA(T&C)/PMS/35(d). Except that :
a. Fabric in roll form shall not be less than 40 Mtrs in running length without stitching/ basting in between.
b. Roll weight shall not exceed 50 kgs.
c. Each roll of fabric shall be wrapped separately with polypropylene plain sheet. final packing of 2 rolls in one W.P Gunny/HDPE sheet.
d. Dimension for paper tubes of fabric roll: Outer Diameter-3.5 cm, Inner Diameter-2.5 cm Thickness-0.5 cm.
e. Fabric selvedges shall be wound evenly at one edge.
13) Sampling plan : As per annexure.
Drawing no.
Sampling Plan attached as Drawing file
Testing / Inspection Facility
21
31040
Metre
7537
O072-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
THERMISTOR AB4681025 028 TY
Description
THERMISTOR AB4681025/028 TY
Specification
THERMISTOR AB4681025/028 TY
Testing / Inspection Facility
15
1179
Number
7538
2019000074
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo
Description
Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo
Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.
Specification
Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo
Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
33000
Whole job
7539
2019000073
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
Fabrication of coat Extreme Cold Climate
Description
IND/TC/4587 (d) & Approved samples
Specification
IND/TC/4587 (d) & Approved samples
Testing / Inspection Facility
21
9330
Whole job
7540
107MMETT19002833
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
7541
OLF/MM-2/T-1906010154
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
JOURNAL LF NO 9927094274
Description
JOURNAL LF NO 9927094274
Specification
JOURNAL LF NO 9927094274
Drawing no.
T-02/IC/8216003/122 M1
Testing / Inspection Facility
99
40
Number
INV CASTING PRECISECAST LF NO 9927091584
Description
INV CASTING PRECISECAST LF NO 9927091584
Specification
INV CASTING PRECISECAST LF NO 9927091584
Drawing no.
T-02/IC/8100000/046 M1
Testing / Inspection Facility
99
213
Number
INV CASTING HANDLE LF NO 9927091564
Description
INV CASTING HANDLE LF NO 9927091564
Specification
INV CASTING HANDLE LF NO 9927091564
Drawing no.
T-02/IC/8333020/038
Testing / Inspection Facility
99
30
Number
INV CASTING SHACKLE LF NO 9927090643
Description
INV CASTING SHACKLE LF NO 9927090643
Specification
INV CASTING SHACKLE LF NO 9927090643
Drawing no.
B-21/IC/8669091/116 M1
Testing / Inspection Facility
99
261
Number
INV CASTING HOLDER LF NO 9927090641
Description
INV CASTING HOLDER LF NO 9927090641
Specification
INV CASTING HOLDER LF NO 9927090641
Drawing no.
B-21/IC/8637886/113 M2
Testing / Inspection Facility
99
98
Number
COVER PLATE LF NO 9927084511
Description
COVER PLATE LF NO 9927084511
Specification
COVER PLATE LF NO 9927084511
Drawing no.
T-02/IC/8604009/042 M1
Testing / Inspection Facility
99
92
Number
INV CASTING PRECISE CAS LF NO 9927075122
Description
INV CASTING PRECISE CAS LF NO 9927075122
Specification
INV CASTING PRECISE CAS LF NO 9927075122
Drawing no.
T-02/IC/7027007/033 M1
Testing / Inspection Facility
99
103
Number
TOOTHED QUADRANT LF NO 9927071797
Description
TOOTHED QUADRANT LF NO 9927071797
Specification
TOOTHED QUADRANT LF NO 9927071797
Drawing no.
B-21/IC/8483011/140 M1
Testing / Inspection Facility
99
19
Number
INV CASTING BODY LF NO 9927071776
Description
INV CASTING BODY LF NO 9927071776
Specification
INV CASTING BODY LF NO 9927071776
Drawing no.
B-21/IC/8020457/093 M1
Testing / Inspection Facility
99
46
Number
INV CASTING BODY LF NO 9927070135
Description
INV CASTING BODY LF NO 9927070135
Specification
INV CASTING BODY LF NO 9927070135
Drawing no.
T-02/IC/8020050/052 M1
Testing / Inspection Facility
99
193
Number
INV CASTING BODY LF NO 9927069257
Physical Verification needed
Description
INV CASTING BODY LF NO 9927069257
Specification
INV CASTING BODY LF NO 9927069257
Drawing no.
T-02/IC/8020051/053 M1
Testing / Inspection Facility
99
372
Number
CASSING LF NO 9927069030
Description
CASSING LF NO 9927069030
Specification
CASSING LF NO 9927069030
Drawing no.
T-01/IC/8665341/189 M1
Testing / Inspection Facility
99
121
Number
INV CASTING HOLDER LF NO 9927069029
Description
INV CASTING HOLDER LF NO 9927069029
Specification
INV CASTING HOLDER LF NO 9927069029
Drawing no.
T-01/IC/8665262/188 M1
Testing / Inspection Facility
99
40
Number
INV CASTING CAM LF NO 9927068918
Description
INV CASTING CAM LF NO 9927068918
Specification
INV CASTING CAM LF NO 9927068918
Drawing no.
T-01/IC/8360133/168 M2
Testing / Inspection Facility
99
170
Number
INV CASTING HANDLE LF NO 9927068879
Description
INV CASTING HANDLE LF NO 9927068879
Specification
INV CASTING HANDLE LF NO 9927068879
Drawing no.
T-01/IC/8333162/175 M1
Testing / Inspection Facility
99
299
Number
INV CASTING FOR HOUSING LF NO 9927068812
Description
INV CASTING FOR HOUSING LF NO 9927068812
Specification
INV CASTING FOR HOUSING LF NO 9927068812
Drawing no.
T-01/IC/8212077/90 M1
Testing / Inspection Facility
99
81
Number
INV CASTING LEVER LF NO 9927068617
Description
INV CASTING LEVER LF NO 9927068617
Specification
INV CASTING LEVER LF NO 9927068617
Drawing no.
T-01/IC/8332861/167 M1
Testing / Inspection Facility
99
76
Number
INV CASTING LEVER LF NO 9927068613
Description
INV CASTING LEVER LF NO 9927068613
Specification
INV CASTING LEVER LF NO 9927068613
Drawing no.
T-01/IC/8332834/128 M1
Testing / Inspection Facility
99
110
Number
INV CASTING LEVER LF NO 9927068611
Description
INV CASTING LEVER LF NO 9927068611
Specification
INV CASTING LEVER LF NO 9927068611
Drawing no.
T-01/IC/8332832/125
Testing / Inspection Facility
99
22
Number
INV CASTING SECTOR GEAR LF NO 9927068607
Description
INV CASTING SECTOR GEAR LF NO 9927068607
Specification
INV CASTING SECTOR GEAR LF NO 9927068607
Drawing no.
T-01/IC/8483069/152 M3
Testing / Inspection Facility
99
60
Number
HANDLE CASTING LF NO 7526030300
Physical Verification needed
Description
HANDLE CASTING LF NO 7526030300
Specification
HANDLE CASTING LF NO 7526030300
Testing / Inspection Facility
75
62
Number
LEVER CASTING LF NO 7525140500
Description
LEVER CASTING LF NO 7525140500
Specification
LEVER CASTING LF NO 7525140500
Drawing no.
IC/ /510206/405
Testing / Inspection Facility
75
14
Number
INV CASTING INSERT LF NO 7522113100
Description
INV CASTING INSERT LF NO 7522113100
Specification
INV CASTING INSERT LF NO 7522113100
Drawing no.
B-21/IC/8214013/131
Testing / Inspection Facility
75
33
Number
INV CASTING FOR BODY LF NO 7522111700
Description
INV CASTING FOR BODY LF NO 7522111700
Specification
INV CASTING FOR BODY LF NO 7522111700
Drawing no.
B-21/IC/8020454/117 M1
Testing / Inspection Facility
75
30
Number
INV CASTING CLAMP LF NO 7522111500
Description
INV CASTING CLAMP LF NO 7522111500
Specification
INV CASTING CLAMP LF NO 7522111500
Drawing no.
B-21/IC/8667787/115 M1
Testing / Inspection Facility
75
157
Number
BODY CASTING SC/52/651 (LF 7515230400)
Description
BODY CASTING SC/52/651 (LF 7515230400)
Specification
BODY CASTING SC/52/651 (LF 7515230400)
Testing / Inspection Facility
75
97
Number
7542
STLTR/01
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
Name
Code
Quantity
Approx Value
Select
FORG FOR OD GEAR ON MAIN SHAFT
Description
FORGING FOR OD GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1609911, DRG.NO.F8A04711-3
Specification
FORGING FOR OD GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1609911, DRG.NO.F8A04711-3
Drawing no.
DRG.NO.F8A04711-3
Testing / Inspection Facility
90
150
Number
FORG FOR 3rd GEAR ON MAIN SHAFT
Description
FORGING FOR 3rd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1668811-3
Specification
FORGING FOR 3rd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1668811-3
Drawing no.
DRG. NO. F1668811-3
Testing / Inspection Facility
90
150
Number
FORG FOR 4th GEAR ON MAIN SHAFT
Description
FORG.FOR 4th GEAR ON MAIN SHAFT, STLN- BS-III,PART NO./DRG.NO.F1668911-3
Specification
FORG.FOR 4th GEAR ON MAIN SHAFT, STLN- BS-III,PART NO./DRG.NO.F1668911-3
Drawing no.
DRG.NO.F1668911-3
Testing / Inspection Facility
90
150
Number
FORG FOR 2nd GEAR ON MAIN SHAFT
Description
FORGING FOR 2nd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1609711-3
Specification
FORGING FOR 2nd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1609711-3
Drawing no.
DRG. NO. F1609711-3
Testing / Inspection Facility
90
150
Number
FORG FOR REVERSE IDLER GEAR BS 3
Description
FORG FOR REVERSE IDLER GEAR , STLN- BS-III, PT. NO. F8A02611-3
Specification
FORG FOR REVERSE IDLER GEAR , STLN- BS-III, PT. NO. F8A02611-3
Drawing no.
DRG. NO. F8A02611-3
Testing / Inspection Facility
90
150
Number
FORG FOR OUTPUT FLANGE BS 3
Description
FORG FOR OUT PUT FLANGE, STLN- BS-III, PT. NO. F1402311-3
Specification
FORG FOR OUT PUT FLANGE, STLN- BS-III, PT. NO. F1402311-3
Drawing no.
DRG. NO. F1402311-3
Testing / Inspection Facility
90
150
Number