ASSY TAIL LAMP BKT. DRG NO.261454400108 COSTING OF PT.NO/DRG NO.261454400110,ASSY GRILL GUARD TO DRG.NO.222654400101(b) MOUNTING BKT TO DRG NO.2226542008201a TWONOS EACH) BKT TO DRG. NO.261454408209, BKT.261454408208, CHANNEL 261454408206,STIFFNER TO PT.NO.261454408207.

ASSY TAIL LAMP BKT. DRG NO.261454400108 COSTING OF PT.NO/DRG NO.261454400110,ASSY GRILL GUARD TO DRG.NO.222654400101(b) MOUNTING BKT TO DRG NO.2226542008201a TWONOS EACH) BKT TO DRG. NO.261454408209, BKT.261454408208, CHANNEL 261454408206,STIFFNER TO PT.NO.261454408207.

Part No. 261454400108N

BATTERY CUT OUT SWITCH TML, PT.NO.257354509931. e

BATTERY CUT OUT SWITCH TML, PT.NO.257354509931. e

Part.No.257354509931

BLACK OUT LAMP REAR, TML PT NO.215454409905/257454409912, FITTED WITH 24V, 2 WATT BULB TML PT.NO.62120510067/216054000105.

BLACK OUT LAMP REAR, TML PT NO.215454409905/257454409912, FITTED WITH 24V, 2 WATT BULB TML PT.NO.62120510067/216054000105.

Part No. 215454409906

CONVOY LAMP ALONGWITH LAMP 24V, 2 WATS,LPTA715 BS-III.

CONVOY LAMP ALONGWITH LAMP 24V, 2 WATS,LPTA715 BS-III.

Part No. 0005440203J

FABRICATION OF JACKET & TROUSERS COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO 220 GSM.

FABRICATION OF JACKET & TROUSERS COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO 220 GSM. SWO PART II No. 60247. SPECIFICATION: OCFAv/Garment/001(c) for JCD OCFAv/Garment/002(c) for TCD MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION.

HINGE DRG. NO. 765-50-2448/A

HINGE DRG. NO. 765-50-2448/A

765-50-2448/A

FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000

FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000 DRG No. 2642-57-11

2642-57-11

SNAP HOOK QUICK EJECTOR

ADRDE/1210(c)

ADRDE/1210(c)

• ADRDE/1210(c)

• ADRDE/1210(c)

SPECN-AS PER PARTICULARS. WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX) WEIGHT/METER :5.2 GM(MAX) BREAKING STRENGTH :150 KG(MIN) HEAT SETTING :PROPER HEAT SETTING IS REQUIRED WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE) TOTAL NO.OF ENDS :228 PICKS/CM :24 DENIER OF YARN :(a)ENDS:153,(b)PICKS :150 T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215 EXTENSION AT BREAK :20-30%

SPECN-AS PER PARTICULARS. WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX) WEIGHT/METER :5.2 GM(MAX) BREAKING STRENGTH :150 KG(MIN) HEAT SETTING :PROPER HEAT SETTING IS REQUIRED WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE) TOTAL NO.OF ENDS :228 PICKS/CM :24 DENIER OF YARN :(a)ENDS:153,(b)PICKS :150 T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215 EXTENSION AT BREAK :20-30%

FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.

SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S.

SWITCH ASSY AND AXLE WITH LEVER DRG NO GCF TM 47 B SHEET 1 AND 2

SWITCH ASSY AND AXLE WITH LEVER DRG NO GCF TM 47 B SHEET 1 AND 2

Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

• Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

• Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

FEMALE PORTION OF CWL

Female Portion of Canopy Withdrawl Line (CWL) for Kiran A/C/Jaguar A/C

Specn No. ADRDE/1343(e).

• As per specification/drawing

• As per specification/drawing

SHACKLE WITH NUT AND BOLT GREY 62248

DRG. NO. ADRDE/ PAS/2008/25

DRG. NO. ADRDE/ PAS/2008/25

SHACKLE WITH NUT AND BOLT (BLACK)

DRG. NO. ADRDE/ 1348-G (b)

DRG. NO. ADRDE/ 1348-G (b)

DRG. NO-ADRDE/1380.

DRG. NO-ADRDE/1380.

DRG. NO-ADRDE/1380.

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY

SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY

SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY

DRG.NO.:ADRDE/1297 ( b )

DRG.NO.:ADRDE/1297 ( b )

TRIGGER MECHANISM TO DRG. No. 2A46M CD 10-27CB

TRIGGER MECHANISM TO DRG. No. 2A46M CD 10-27CB

. 2A46M CD 10-27CB

FIRING MECHANISM ASSY. TO DRG NO. 2A46-CD10-20CB

FIRING MECHANISM ASSY. TO DRG NO. 2A46-CD10-20CB

2A46-CD10-20CB

INDUCTION HARDENING OF SECTOR DRG No. 675- 54-190

INDUCTION HARDENING OF SECTOR DRG No. 675- 54-190

675- 54-190

INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438 [ FOR FIRST TIME PROCUREMENT FIRM SHOULD DO TRIAL, TESTING OF FIRST SHIELD BY CUTTING/SECTIONING OF FIRST INDUCTION HARDENING SHIELD, PREPARING TEST PIECE AND HARDNESS TESTING AT 1MM INTERVALS, TO SHOW THE PROCESS ESTABLISHMENT FOR CORRECT HARDNESS AND DEPTH AS PER DRAWING ]. NOTE:- MATERIAL/COMPONENT WILL BE SUPPLIED BY GCF.

INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438 [ FOR FIRST TIME PROCUREMENT FIRM SHOULD DO TRIAL, TESTING OF FIRST SHIELD BY CUTTING/SECTIONING OF FIRST INDUCTION HARDENING SHIELD, PREPARING TEST PIECE AND HARDNESS TESTING AT 1MM INTERVALS, TO SHOW THE PROCESS ESTABLISHMENT FOR CORRECT HARDNESS AND DEPTH AS PER DRAWING ]. NOTE:- MATERIAL/COMPONENT WILL BE SUPPLIED BY GCF.

675 51 CD162CB 1005 560438

Fabric Plain Weave Flame Retardant Blue 150 cm width excluding selvedges.

Fabric Plain Weave Flame Retardant Blue 150 cm width excluding selvedges. Specification No.1201908/001

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE.

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE. SPECIFICATION NO.:1201909/003

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD.

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD. SPECIFICATION NO.:1201909/003

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE SPECIFICATION NO.:1201909/003

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD.

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD. SPECIFICATION NO.:1201909/003

FUEL GAUGE ASSY AS PER DRAWINGS AND SPECIFICATIONS.

FUEL GAUGE ASSY AS PER DRAWINGS AND SPECIFICATIONS.

IT3 IC.000 CP OST B3 3177-75

PCB ASSEMBLY AS PER DRAWINGS AND SPECIFICATIONS.

PCB ASSEMBLY AS PER DRAWINGS AND SPECIFICATIONS.

AS PER ATTACHMENTS.

9927093106 SHIELDING BRAID (PML)- 16X24 SHIELD BRAID PML-16X24 AS PER SPECN.NO:-OLF/AL/SHIELD /01/MOD

9927093106 SHIELDING BRAID (PML)- 16X24 SHIELD BRAID PML-16X24 AS PER SPECN.NO:-OLF/AL/SHIELD /01/MOD

9927077166 SLEEVE PVC, 3.31TV40-2.5X0.4MM PVC SLEEVE 3.31TV40-2.5X0.4 AS PER JSS-54801 AND SPECN NO:OLF/AL/SLV/02/MOD

9927077166 SLEEVE PVC, 3.31TV40-2.5X0.4MM PVC SLEEVE 3.31TV40-2.5X0.4 AS PER JSS-54801 AND SPECN NO:OLF/AL/SLV/02/MOD

9927077150 SLEEVE PVC 3.31TV50-1.0X0.4 PVC SLEEVE (3.31TV 50)-1.0X0.4 MM AS PER JSS-54801 AND SPECN NO-OLF/MSD/SLV/02/MOD

9927077150 SLEEVE PVC 3.31TV50-1.0X0.4 PVC SLEEVE (3.31TV 50)-1.0X0.4 MM AS PER JSS-54801 AND SPECN NO-OLF/MSD/SLV/02/MOD

9001121614 POLY. WINDING WIRE PAEV -1-0.5 Drg No.GOST-7262-78 POLY. WINDING WIRE PAEV -1-0.5 AS PER GOST-7262-78

9001121614 POLY. WINDING WIRE PAEV -1-0.5 Drg No.GOST-7262-78 POLY. WINDING WIRE PAEV -1-0.5 AS PER GOST-7262-78

9001120710 WIRE MGSH-0.05, GOST-10349-75 WIRE MGSH-0.05, GOST-10349-75

9001120710 WIRE MGSH-0.05, GOST-10349-75 WIRE MGSH-0.05, GOST-10349-75

9001120436 SLEEVE(HEAT SHRINKABLE)-6X0.25 SLEEVE (HEAT SHRINKABLE SLEEVE )-NOMINAL SIZE-6X0.25 MM AS PER SPECN. NO: OLF/AII/AL/1 1/HSS ATTACHED

9001120436 SLEEVE(HEAT SHRINKABLE)-6X0.25 SLEEVE (HEAT SHRINKABLE SLEEVE )-NOMINAL SIZE-6X0.25 MM AS PER SPECN. NO: OLF/AII/AL/1 1/HSS ATTACHED

9001120308 SLEEVE-TLV-1.0 ,GOST-9614-75 SLEEVE-TLV-1.0, GOST-9614-75

9001120308 SLEEVE-TLV-1.0 ,GOST-9614-75 SLEEVE-TLV-1.0, GOST-9614-75

7441122809 SLEEVE F-4DE-2.5 X 0.4 Drg No.GOST-22056-76 SLEEVE F-4DE-2.5 X 0.4 AS PER GOST-22056-76

7441122809 SLEEVE F-4DE-2.5 X 0.4 Drg No.GOST-22056-76 SLEEVE F-4DE-2.5 X 0.4 AS PER GOST-22056-76

7441122799 WIRE MGSHV 1.5B Drg No.TU16-505.437-82 WIRE MGSHV 1.5B AS PER SPECN. NO. TU16-505.437-82

7441122799 WIRE MGSHV 1.5B Drg No.TU16-505.437-82 WIRE MGSHV 1.5B AS PER SPECN. NO. TU16-505.437-82

7441120500 PVC SLEEVE 2.0 X 0.4 MM PVC SLEEVE 2.0 X 0.4 MM WHITE COLOUR JSS-54808

7441120500 PVC SLEEVE 2.0 X 0.4 MM PVC SLEEVE 2.0 X 0.4 MM WHITE COLOUR JSS-54808

7441120366 PVC SLEEVE 3.0X0.4 PVC SLEEVE 3.0X0.4 WHITE COLOUR AS PER GOST 19034-82 JSS-54808

7441120366 PVC SLEEVE 3.0X0.4 PVC SLEEVE 3.0X0.4 WHITE COLOUR AS PER GOST 19034-82

7440901255 CORD SLEEVE SH CH SH CORD SLEEVE SH CH SH-1.0-23 AS PER SPECN. NO. OST 17-184-88

7440901255 CORD SLEEVE SH CH SH CORD SLEEVE SH CH SH-1.0-23 AS PER SPECN. NO. OST 17-184-88

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR

K-4110*5

• AS PER DRAWING
• MACHINING
• FABRICATION

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.

SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.

DRAWING ADRDE/271(b)

BODY DRG NO AL8035169 LF NO 7440205758

BODY DRG NO AL8035169 LF NO 7440205758

AL8.035.169

HOLDER TO DRG NO AL9.329.994 (LF7440205667)

HOLDER TO DRG NO AL9.329.994 (LF7440205667)

LEVER TO DRG NO BL9185830 LF NO 7420112083

LEVER TO DRG NO BL9185830 LF NO 7420112083

BL9185830

INTERMEDIATE GEAR FORGING TO DRG NO 175 45 005 F

DRG NO 175 45 005 F

FABRIC UNIDIRECTIONAL 160 CM WIDTH USED IN SOFT ARMOUR PANEL SAP OF BODY ARMOUR

FABRIC UNIDIRECTIONAL 160 CM WIDTH USED IN SOFT ARMOUR PANEL SAP OF BODY ARMOUR SPECIFICATION NO. : 1201909/001

BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS

BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS SPECIFICATION NO. : 1201909/002

STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.

STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.

INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*14FOR RIFLE 5.56MM INSAS

INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*14FOR RIFLE 5.56MM INSAS

RFI SK.NO.5709*14

9081008167 LINK BEARING TO DRAWING NO 6289044

LINK BEARING TO DRAWING NO.6289044.

9081008166 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6293295.

9081008165 BEARING TO DRAWING NO 6293496

BEARING TO DRAWING NO.6293496.

9081008164 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6298987.

9081008163 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6298988.

9081008162 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6298989.

9081008161 LINK BEARING TO DRAWING NO. 6333019

LINK BEARING TO DRAWING NO. 6333019

9081008160 LINK BEARING TO DRAWING NO 6339977

LINK BEARING TO DRAWING NO. 6339977

9081008159 LINK BEARING TO DRAWING NO. 6339978

LINK BEARING TO DRAWING NO. 6339978

Image Intensifier Tube as per specification and drawing

OLF/IIT/HPSG(INV)/SPEC/01(M1)/2009-10

OLF/R&D/IIT/197(M1)

• Manufacturing Capability

• Testing Facilities

DRG.NO.ADRDE/1381.

DRG.NO.ADRDE/1381.

DRG.NO.ADRDE/1381.

HULL ELECTRICAL WIRES TO DRG NO 6795 88 CB 6101

HULL ELECTRICAL WIRES TO DRG NO 6795 88 CB 6101

TOOLS AND ACCESSORIES 6795 93 CB6500

TOOLS AND ACCESSORIES 6795 93 CB6500

PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM, DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'

PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM, DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'

0204-03-02-19-31-000-00DG

HULL ELECTRICAL EQUIPMENT 6795 82 CB6000 KIT A

HULL ELECTRICAL EQUIPMENT 6795 82 CB6000 KIT A

TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC

TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC

0204-03-03-16-26-000-00DD

Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover

Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover

DRG. No. 0204-03-03-01-12-000-00DB

GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB

GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB

DRG NO. 0204-03-02-00-00-001-00DB

Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC

Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC

Drg. No. 0204-03-02-00-09-005-00DC

Buffer for JVPC 5.56MM X 30MM DRG No. 0204-03-02-03-22-005-00DB

Buffer for JVPC 5.56MM X 30MM DRG No. 0204-03-02-03-22-005-00DB

0204-03-02-03-22-005-00DB

R H MANIFOLD 675 10 CD 120

R H MANIFOLD 675 10 CD 120

Striker to Drg. no. NAD 7606/2 DT. 03 Sep 13 for Striker Mechanism in finished condition. ARD no.2572, DT.26.07.2019.

Striker to Drg. no. NAD 7606/2 DT. 03 Sep 13 for Striker Mechanism in finished condition. ARD no.2572, DT.26.07.2019.

NAD 7606/2

TAPING FABRIC WIDTH 50 MM

Appendix " E" of Specn CQAE/1940/1548/g

COATED FABRIC FOR BUOYANCY TUBE 130 CM WIDTH (MIN)

APPENDIX "A, B & C" AND CLAUSE 6.1 OF SPECN CQAE/1940/1548/g

POLYCHLOROPRENE SYNTHETIC RUBBER (NEOPRENE) COATED 101 CMS (MIN) FOR BAFFLE WALL

Appendix " D" of Specn CQAE/1940/1548/g

COATED FABRIC FOR FLOOR 130 CM WIDTH (MIN)

APPENDIX "A, B & C" AND CLAUSE 6.1.1 OF SPECN CQAE/1940/1548/g

TAPE NYLON 2.54 CM U/D BS 227 KG

DRG. NO. IS 6349-1981

PULLEY RTU 250

SPECN. NO. ADRDE/1159-A-2/SA-6(a)

ADRDE/1159-A-2/SA-6(a)