Name
Code
Quantity
Approx Value
Select
DEEP SAXE BLUE TO BS 381 C 1980 TINT 113
Description
DEEP SAXE BLUE TO BS 381 C 1980 TINT 113
Specification
DEEP SAXE BLUE TO BS 381 C 1980 TINT 113
Testing / Inspection Facility
10
0
Litre
STEEL ROUND 80 MM DIA to spec 070 M 55 TO
Description
STEEL ROUND 80 MM +1 MM DIA TO SPECN. 070 M 55 TO BS-970:PT-1-1983 IN HOT ROLLED,PEELED & MAGNETICALLY CRACK DETECTION PASSED CONDN.END OF BAR SQUARE,YIED STREES-2% PRROF STRESS 650 MPA (MIN),ELONGATION-10% (MIN),LENGTH 1.2 MTR. OR IN MULTIPLE OF 300 THEREAFTER MATL. SHOULD BE FREE FROM FLAW.
Specification
STEEL ROUND 80 MM +1 MM DIA TO SPECN. 070 M 55 TO BS-970:PT-1-1983 IN HOT ROLLED,PEELED & MAGNETICALLY CRACK DETECTION PASSED CONDN.END OF BAR SQUARE,YIED STREES-2% PRROF STRESS 650 MPA (MIN),ELONGATION-10% (MIN),LENGTH 1.2 MTR. OR IN MULTIPLE OF 300 THEREAFTER MATL. SHOULD BE FREE FROM FLAW.
Testing / Inspection Facility
01
13622
Kilogram
PLUG FUZE HOLE TRANSIT TO GSF SK NO M 5429 IN F C
Description
PLUG FUZE HOLE TRANSIT TO GSF SK NO M-5429 IN F/C
Specification
PLUG FUZE HOLE TRANSIT TO GSF SK NO M-5429 IN F/C
Testing / Inspection Facility
62
0
Number
DUMMY PELLET M 10395
Description
DUMMY PELLET IN F/C TO DRG.NO.M-10395 DT. 27.08.2005
Specification
AS PER DRG. NO. M-10395
Testing / Inspection Facility
62
1056
Number
AL ALLOY ROD 36 MM SPECN IS 733 1983 GR 24345 IN WP CONDITION MATL CLASS B OF IS 3965 1981 PPGG NOT EXCEEDING 3 5 MM DEPTH IN STRAIGHT LENGTH
Description
AL ALLOY ROD 36 MM SPECN IS 733 1983 GR 24345 IN WP CONDITION MATL CLASS B OF IS 3965 1981 PPGG NOT EXCEEDING 3 5 MM DEPTH IN STRAIGHT LENGTH
Specification
AL ALLOY ROD 36 MM SPECN IS 733 1983 GR 24345 IN WP CONDITION MATL CLASS B OF IS 3965 1981 PPGG NOT EXCEEDING 3 5 MM DEPTH IN STRAIGHT LENGTH
Testing / Inspection Facility
06
137444
Kilogram
WOODEN PACKING BOX WITH PLASTIC LINER DRG. NO CO-517
Description
WOODEN PACKING BOX WITH PLASTIC LINER DRG. NO CO-517
Specification
AS PER DRAWING
Testing / Inspection Facility
14
2200
Number
FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG NO F 495E
Description
FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG.NO F-495E
Testing / Inspection Facility
61
40000
Number
BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN IS 168 1973 ISC NO 102 TO SPECN IS 5 1978
Description
BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978
Specification
BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978
Testing / Inspection Facility
10
1135
Litre
PAINT RM SIGNAL RED
Description
PAINT RM SIGNAL RED TO ISC- 537 TO SPCN. IS-138-1981
Specification
PAINT RM SIGNAL RED TO ISC- 537 TO SPCN. IS-138-1981
Testing / Inspection Facility
10
165
Kilogram
PAINT RM WHITE SEMI GLOSSY IS138 81
Description
PAINT RM WHITE SEMI GLOSSY IS138-81
Specification
PAINT RM WHITE SEMI GLOSSY IS138-81
Testing / Inspection Facility
10
110
Kilogram
BLANK FOR BODY CASTING FOR 84 MM TPT
Description
AS PER DRG.& SPECIFICATION
Specification
AS PER DRG.& SPECIFICATION
Testing / Inspection Facility
61
55825
Number
BLANK FOR DISTANCE TUBE TO OFAJ DRG NO CC 533 C
Description
BLANK FOR DISTANCE TUBE TO OFAJ DRG. NO. CC-533-C
Specification
AS PER DRG.
Testing / Inspection Facility
62
56650
Number
Plastic Liner to GSF SK NO M 6810 1
Physical Verification needed
Description
Plastic Liner to GSF SK NO. M-6810/1
Specification
Plastic Liner to GSF SK NO. M-6810/1
Testing / Inspection Facility
61
1
Number
PACKING BOX CO 262 3 A IN FC
Description
PACKING BOX CO-262/3A IN FC
Testing / Inspection Facility
14
40000
Number
CAP DET NO 4 TO DRG NO 3 022859 IN FC TO SK NO OTF SE 008
Description
CAP DET. NO. 4 IN F/C (TO SK. NO. OTF/SE/008)DRG. NO. 3-022859
Specification
CAP DET. NO. 4 IN F/C (TO SK. NO. OTF/SE/008)DRG. NO. 3-022859
Testing / Inspection Facility
62
13858
Number
MACHINING AND PROCESSING OF CONTACT CAP TO DET NO 7 OF DRG NO 3 022859 IN FC OTF SE 005
Description
MACHINING AND PROCESSING OF CONTACT CAP TO DET. NO.7 OF DRG.NO.3-022859 IN F/C (TO SK NO. OTF/SE/005)
Specification
MACHINING AND PROCESSING OF CONTACT CAP TO DET. NO.7 OF DRG.NO.3-022859 IN F/C (TO SK NO. OTF/SE/005)
Testing / Inspection Facility
91
14508
Number
SCREW TO DET NO 6 OF DRG NO 3 022859 OTF SE 007
Description
SCREW TO DET NO 6(TO SK. NO. OTF/SE/007) IN F/C DRG. NO. 3-022859
Specification
SCREW TO DET NO 6(TO SK. NO. OTF/SE/007) IN F/C DRG. NO. 3-022859
Testing / Inspection Facility
62
13858
Number
SPRING TO DET NO 5 SK NO OTF SE 006 IN F C
Description
SPRING TO DET NO. 5 SK NO OTF/SE/006 IN F/C
Specification
SPRING TO DET NO. 5 SK NO OTF/SE/006 IN F/C
Testing / Inspection Facility
62
13858
Number
STEEL ROD 13 MM PLUS MINUS 0 POINT 1 MM DIA TO SPCN BS 970 PT 1 STEEL GRADE 070 M 20 COLD DRAWN IN A LENGTH OF 2 POINT 5 TO 2 POINT 7 MTR
Description
STEEL ROD 13 MM +/- 0.1 MM DIA TO SPCN BS 970 PT 1 STEEL GRADE 070 M 20 COLD DRAWN IN A LENGTH OF 2.5 TO 2.7 MTR
Specification
STEEL ROD 13 MM +/- 0.1 MM DIA TO SPCN BS 970 PT 1 STEEL GRADE 070 M 20 COLD DRAWN IN A LENGTH OF 2.5 TO 2.7 MTR
Testing / Inspection Facility
13
7150
Kilogram
MOULDING ASSEMBLY OF BODY WITH CONTACT
Description
MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94
Specification
MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94
Testing / Inspection Facility
62
13227
Number
CAP TO SK NO OTF PG 002 IN FC
Description
CAP,ET.1-6 OF DRG. NO.3-024044 TO SK NO. OTF PG 002 IN FC.
Specification
AS PER DRG.
Testing / Inspection Facility
62
13227
Number
SLEEVE TO SK NO OTF PG 006
Description
SLEEVE TO DET.1-8B TO SK. NO. OTF/PG/006 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
62
13227
Number
NUT IN FC TO SK NO OTF PG 003
Description
NUT IN F/C TO SK. NO. OTF/PG/003 DET. (1-5)
Testing / Inspection Facility
64
13227
Number
CONTAINER M 9120B
Description
CONTAINER AS PER DRG. NO. M-9120B
Specification
CONTAINER AS PER DRG. NO. M-9120B
Testing / Inspection Facility
14
13418
Number
CONTAINER AS PER DRG NO M 9121 B
Description
CONTAINER AS PER DRG. NO. M-9121B
Testing / Inspection Facility
14
13227
Number
STEEL ROD 7 MM DIA TO SPECN BS 970 PT 1 GRADE 080M
Description
STEEL ROD 7 MM DIA TO SPECN , BS : 970 PT : 1 GRADE: 080 M
Specification
STEEL ROD 7 MM DIA TO SPECN , BS : 970 PT : 1 GRADE: 080 M
Testing / Inspection Facility
14
198
Kilogram
BUSH TO SK NO OTF DD 013 IN FC
Description
BUSH TO DET 2-20 TO SK. NO. OTF/DD/013 IN F/C.
Testing / Inspection Facility
62
26000
Number
PLATE TO DET No 2 8 OF DRG NO SK NO OTF DD 016
Description
PLATE TO DET 2-8 TO SK. NO. OTF/DD/016 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
62
26000
Number
STEEL BALL V 3 POINT 175 TY 37 006 080 77 TO SK NO OTF DD 031 IN F C
Description
STEEL BALL V 3.175 TY-37.006.080-77 TO SK NO OTF/DD/031 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
62
26000
Number
CAP DET NO 21 TO SK NO OTF DD 001 IN FC
Description
CAP DET NO. 21 TO SK. NO. OTF/DD/001 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
62
26000
Number
SPRING TO SK NO OTF DD 015 IN FC
Description
SPRING,DET (2-15) TO SK. NO. OTF/DD/015 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
62
26000
Number
MACHINING AND PROCESSING OF STOPPER
Description
MACHINING & PROCESSING OF STOPPER TO DRG. No. OTF/DD
Specification
MACHINING & PROCESSING OF STOPPER TO DRG. No. OTF/DD
Testing / Inspection Facility
91
26000
Number
STOPPER 024045
Description
STOPPER DET. 2-6, DRG. NO. 3-024045 (OTF/DD/004) IN F/C
Specification
STOPPER DET. 2-6, DRG. NO. 3-024045 (OTF/DD/004) IN F/C
Testing / Inspection Facility
62
26000
Number
PIEZO ELEMENT TO DRG NO IQX 882 TO SPECN CQA A 0918 TO SK NO OTF PG 016
Description
PIEZO ELEMENT TO DRG. NO, IQX-882, TO SPECN. CQA(A)-0918, (TO SK. NO. OTF/PG/016). DC 35633-A DT. 13/12/93
Specification
PIEZO ELEMENT TO DRG. NO, IQX-882, TO SPECN. CQA(A)-0918, (TO SK. NO. OTF/PG/016). DC 35633-A DT. 13/12/93
Testing / Inspection Facility
62
13227
Number
BODY SUB ASSY DET Cd 3 TO DRG NO 3 022859 TO SK NO OTF SE 010 IN F C
Description
BODY SUB-ASSY. DET. Cd-3 TO DRG. NO. 3-022859 (TO SK.NO.OTF/SE/010) IN F/C
Specification
BODY SUB-ASSY. DET. Cd-3 TO DRG. NO. 3-022859 (TO SK.NO.OTF/SE/010) IN F/C
Testing / Inspection Facility
62
13858
Number
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 485
Description
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO CO-485
Specification
AS PER DRAWING
Testing / Inspection Facility
14
186
Number
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 484 A
Description
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO CO-484 A
Specification
AS PER DRAWING
Testing / Inspection Facility
14
26000
Number
Body with Insulation to GSF Sketch No OTF DD 023 for Fuze B 15
Description
Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15
Specification
Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15
Testing / Inspection Facility
62
26000
Number
CONTACT TO DET. NO. 2-12 OF DRG. NO.3-024045
Description
DRG.NO. 3-24045 det 2-12 FOR FUZE B-15
Specification
DRG.NO. 3-24045 det 2-12 FOR FUZE B-15
Testing / Inspection Facility
62
26000
Ample
SPRING LOCKIN PIN TO PT NO IQX 1004 FC
Description
SPRING LOCKING PIN TO PT NO IQX 1004 F/C
Specification
SPRING LOCKING PIN TO PT NO IQX 1004 F/C
Testing / Inspection Facility
63
95487
Number
DIE CASTING SAFETY CAP DRG NO C 2252A
Description
DIE CASTING SAFETY CAP.DRG.NO.C-2252A.
Specification
DIE CASTING SAFETY CAP.DRG.NO.C-2252A.
Testing / Inspection Facility
63
96407
Number
AL ALLOY ROD 42 MM DIA TO SPECN IS 733 1983 GR 24345 IN WP CONDITION
Description
AL.ALLOY ROD 42 MM DIA TO SPECN IS 733;1983 GR 24345 IN “WP” CONDITION
Specification
AL.ALLOY ROD 42 MM DIA TO SPECN IS 733;1983 GR 24345 IN “WP” CONDITION
Testing / Inspection Facility
06
6952
Kilogram
STEEL BALL 6 POINT 35 MM DIA FD 124 DC 37162 A DT 11 03 08
Description
STEEL BALL 6.35MM DIA.FD-1244 DC.NO:37162-A
Specification
STEEL BALL 6.35MM DIA.FD-1244 DC.NO:37162-A
Testing / Inspection Facility
63
95487
Number
SEPTUM IN F C DRG NO FD 1238 PT NO QX 361
Description
SEPTUM IN F/C DRG.NO.FD-1238,PT.NO.QX-361.
Specification
SEPTUM IN F/C DRG.NO.FD-1238,PT.NO.QX-361.
Testing / Inspection Facility
63
95487
Number
BRASS ROD 6 MM MM DIA TO SPECN BS 2874 86 CZ 121 PB3 IN M CONDITION
Description
BRASS ROD 6 MM +-0.02MM DIA. TO SPECN.BS.-2874-86 -CZ-121,PB3 IN ‘M’ CONDITION
Specification
BRASS ROD 6 MM +-0.02MM DIA. TO SPECN.BS.-2874-86 -CZ-121,PB3 IN ‘M’ CONDITION
Testing / Inspection Facility
07
511
Kilogram
BRASS ROD 1 1 by 4 inch 31 point 75MM DIA SPECN BS 2874 1986 CZ 121 PB3 IN M CONDITION
Description
BRASS ROD 1-1/4”(31.75MM) DIA SPECN.BS.-2874-1986-CZ-121,PB3 IN ‘M’ CONDITION
Specification
BRASS ROD 1-1/4”(31.75MM) DIA SPECN.BS.-2874-1986-CZ-121,PB3 IN ‘M’ CONDITION
Testing / Inspection Facility
07
6824
Kilogram
MACHINING AND PROCESSING OF BRASS EXTRUDED SHUTER TO DRG NO F676 1 TO PRODUCE SHUTTER PART NO IQX7
Description
MACHINING AND PROCESSING OF BRASS EXTRUDED SHUTER TO DRG NO F676/1 TO PRODUCE SHUTTER PART NO IQX7.
Specification
MACHINING AND PROCESSING OF BRASS EXTRUDED SHUTER TO DRG NO F676/1 TO PRODUCE SHUTTER PART NO IQX7.
Testing / Inspection Facility
91
92727
Number
SCREW CHEESE HEAD M2X5 LONG TO SPECN IS 1366 1982 2ND REV STEEL
Description
SCREW (CHEESE HEAD) M2X5 LONG TO SPECN IS -1366-1982(2ND REV) STEEL
Specification
SCREW (CHEESE HEAD) M2X5 LONG TO SPECN IS -1366-1982(2ND REV) STEEL
Testing / Inspection Facility
63
95487
Number
PIN HINGE IN FC FD 1252 DRG QX 1248 DC 36103 A
Description
PIN HINGE IN F/C FD 1252 DRG QX 1248 DC 36103-A
Specification
PIN HINGE IN F/C FD 1252 DRG QX 1248 DC 36103-A
Testing / Inspection Facility
63
94567
Number
WIND SHIELD IN FINISH CONDITION ARDE 2236 DET 13
Description
WIND SHIELD IN F/C (DRG.NO. ARDE-2236 DET-13) TO PT. IQX 1010 TO DC NO.37132-A
Specification
WIND SHIELD IN F/C (DRG.NO. ARDE-2236 DET-13) TO PT. IQX 1010 TO DC NO.37132-A
Testing / Inspection Facility
63
94567
Number
SEALING RING IN F C ARDE DRG NO 2236 DET 12 TO PT NO IQX 1009 DC 36157 A
Description
SEALING RING IN F/C (ARDE DRG NO 2236 DET.12) TO PT.NO.IQX 1009.DC.36157-A
Specification
SEALING RING IN F/C (ARDE DRG NO 2236 DET.12) TO PT.NO.IQX 1009.DC.36157-A
Testing / Inspection Facility
63
94567
Number
STEEL ROD 13 MM PLUS MINUS 0 POINT 1 MM DIA TO SPECN BS 970
Description
STEEL ROD 13 MM+-.1 MM DIA TO SPECN.BS 970
Specification
STEEL ROD 13 MM+-.1 MM DIA TO SPECN.BS 970
Testing / Inspection Facility
01
7146
Kilogram
AL ALLOY ROD 60 MM DIA SPECN IS 733 1983 GR 24345
Description
AL ALLOY ROD 60 MM DIA-SPECN.IS 733:1983 GR.24345
Specification
AL ALLOY ROD 60 MM DIA-SPECN.IS 733:1983 GR.24345
Testing / Inspection Facility
06
48572
Kilogram
PLASTIC CONTAINER FOR FUZE DA5A PACKING M 10699
Description
PLASTIC CONTAINER FOR FUZE DA5A PACKING AS PER DRG. NO. M-10699
Specification
PLASTIC CONTAINER FOR FUZE DA5A PACKING AS PER DRG. NO. M-10699
Testing / Inspection Facility
14
93840
Number
SERVICE CHARGES FOR RADIOGRAPHIC EXAMINATION OF AMMN COMPONENTS FOR FUZE 162 MK 8 AND 9 DA5A STORES AS PER TERMS AND CONDITIONS
Description
SERVICE CHARGES FOR RADIOGRAPHIC EXAMINATION OF AMMN COMPONENTS FOR FUZE 162 MK- 8 & 9 DA5A STORES AS PER TERMS AND CONDITIONS
Specification
SERVICE CHARGES FOR RADIOGRAPHIC EXAMINATION OF AMMN COMPONENTS FOR FUZE 162 MK- 8 & 9 DA5A STORES AS PER TERMS AND CONDITIONS
Testing / Inspection Facility
91
5556439
Sq.centimetre
SHUTTER IN F COND TO DRG NO IQX 7
Description
SHUTTER TO DRG NO IAFD 38 OR IQX 7 IN FINISHED CONDITION
Specification
SHUTTER TO DRG NO IAFD 38 OR IQX 7 IN FINISHED CONDITION
Testing / Inspection Facility
63
2
Number
SPRING IN FC TO DRG NO QX 344
Description
SPRING IN F/C TO DRG. NO. QX-344
Specification
SPRING IN F/C TO DRG. NO. QX-344
Testing / Inspection Facility
63
96633
Number
Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02
Description
Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02
Specification
Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02
Testing / Inspection Facility
63
4000
Number
TAG PIN WASHER ASSEMBLY ARDE NO 2236 DET 10
Description
TAG PIN WASHER ASSEMBLY (ARDE NO. 2236 DET-10) IN FINISHED CONDITION
Specification
TAG PIN WASHER ASSEMBLY (ARDE NO. 2236 DET-10) IN FINISHED CONDITION
Testing / Inspection Facility
63
95487
Number
STRIKER TO DRG. NO IQX-1000 IN FINISHED CONDITION DC(I) NO-37 263-A DT 26/08/2010
Description
STRIKER TO DRG. NO IQX-1000 IN FINISHED CONDITION DC(I) NO-37 263-A DT 26/08/2010
Specification
AS PER DRAWING
Testing / Inspection Facility
63
2
Number
STOP DETENT TO DRG NO IQX 1002
Description
STOP DETENT TO DRG. NO. IQX-1002 IN F/C
Specification
AS PER DRG.
Testing / Inspection Facility
63
96140
Number
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 490 B
Description
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO CO-490 B
Specification
AS PER DRAWING
Testing / Inspection Facility
14
1855
Number
HEAT TREATMENT ANNEALING OPERATION OF CLIP M 11249
Description
HEAT TREATMENT (ANNEALING) OPERATION OF COMPONENT CLIP TO DRG NO. M-11249
Specification
AS PER DRAWING
Testing / Inspection Facility
91
77
Set
CAP TO DRG NO NAI J 501 15 IN FC
Description
CAP TO DRG NO NAI(J) 501/15 IN F/C
Specification
CAP TO DRG NO NAI(J) 501/15 IN F/C
Testing / Inspection Facility
63
236129
Number
HEAT TREATMENT ANNEALING OPERATION OF COMPONENT SPIRAL BLANK TO DRG NO M 11248
Description
HEAT TREATMENT (ANNEALING) OPERATION OF COMPONENT SPIRAL BLANK TO DRG. NO M-11248
Specification
HEAT TREATMENT (ANNEALING) OPERATION OF COMPONENT SPIRAL BLANK TO DRG. NO M-11248
Testing / Inspection Facility
91
56
Set
DISC MILL BOARD NAI J 501 8 5
Description
DISC (MILL BOARD) TO DRG. NO. NAI(J ) 501/8/5 IN FINISHED CONDITION
Specification
DISC (MILL BOARD) TO DRG. NO. NAI(J ) 501/8/5 IN FINISHED CONDITION
Testing / Inspection Facility
63
236129
Number
AL ALLOY ROD 16 MM DIA PLUS MINUS 0POINT25MM TO SPECN IS 733 1983
Description
AL. ALLOY ROD 16 MM DIA +/- 0.25MM TO SPECN IS:733-1983
Specification
AL. ALLOY ROD 16 MM DIA +/- 0.25MM TO SPECN IS:733-1983
Testing / Inspection Facility
06
249
Kilogram
WASHER PVC TO DRG NO NAI J 501 3 IN FC
Description
WASHER PVC TO DRG NO NAI J 501 3 IN FC
Specification
WASHER PVC TO DRG NO NAI J 501 3 IN FC
Testing / Inspection Facility
63
235060.23
Number
GRINDING AND STRAIGHTENING OF STEEL BAR OF 22 MM DIA
Description
GRINDING AND STRAIGHTENING OF STEEL BAR OF 22 MM DIA. WITH RANGE OF 21.95 TO 22 MM BY GRINDING AND STRAIGHTENING TO TOLERANCE ADMISABLE STRAIGHTNESS/METER MAX:0.35 MM
Specification
GRINDING AND STRAIGHTENING OF STEEL BAR OF 22 MM DIA. WITH RANGE OF 21.95 TO 22 MM BY GRINDING AND STRAIGHTENING TO TOLERANCE ADMISABLE STRAIGHTNESS/METER MAX:0.35 MM
Testing / Inspection Facility
91
35485
Kilogram
WOODEN PACKING BOX NO CO 374 B 760 X 610X 63 MM
Description
WOODEN PACKING BOX NO. CO-374 B (760 X 610X 63 MM)
Specification
AS PER DRAWING
Testing / Inspection Facility
14
214
Number
STEEL STRIP 0 POINT 1 MM
Description
STEEL STRIP 0.1 MM -0.02 MM THICK X 21 MM -1 MM WIDTH
Specification
STEEL STRIP 0.1 MM -0.02 MM THICK X 21 MM -1 MM WIDTH
Testing / Inspection Facility
15
89
Kilogram
BRASS STRIP 0 POINT 6 MM 0 POINT 05 MM THICK X 12 MM PLUS 1 MM WIDTH
Description
BRASS STRIP 0.6 MM -0.05 MM THICK X 12 MM +1 MM WIDTH
Specification
BRASS STRIP 0.6 MM -0.05 MM THICK X 12 MM +1 MM WIDTH
Testing / Inspection Facility
71
273
Kilogram
BRASS STRIP 1 MM
Description
BRASS STRIP 1 MM -0.1 MM THICKNESS X 18 MM -1 MM WIDTH
Specification
BRASS STRIP 1 MM -0.1 MM THICKNESS X 18 MM -1 MM WIDTH
Testing / Inspection Facility
71
110
Kilogram
STEEL ROD 14 POINT 5 MM DIA 0 POINT 1 MM TO IS 4431 10C8S10 IN CD
Description
STEEL ROD 14.5 MM DIA -0.1 MM TO IS:4431 10C8S10 IN CD
Specification
STEEL ROD 14.5 MM DIA -0.1 MM TO IS:4431 10C8S10 IN CD
Testing / Inspection Facility
13
4071
Kilogram
GASKET NAI J 501 17 A
Description
GASKET (SILK CLOTH) TO DRG. NO. NAI(J) 501/17/A IN F/C
Specification
GASKET (SILK CLOTH) TO DRG. NO. NAI(J) 501/17/A IN F/C
Testing / Inspection Facility
63
236129
Number
STEEL ROD 3 point 5 MM DIA TO SPECN BS 970 PT 1 GR 80M50 0144017350
Description
STEEL ROD 3.5 MM DIA +/- 0.05 MM TO SPECN BS-970 PT-1 GR 80M50
Specification
STEEL ROD 3.5 MM DIA +/- 0.05 MM TO SPECN BS-970 PT-1 GR 80M50
Testing / Inspection Facility
14
204
Kilogram