set of hardened and tempered steel raw material as pe Annexure HTSRMTL1

set of hardened and tempered steel raw material as pe Annexure HTSRMTL1

set of case hardened steel raw material as pe Annexure CHSRMTL1

set of case hardened steel raw material as pe Annexure CHSRMTL1

Set of stainless steel raw material as per Annnexure SSRMTL

Set of stainless steel raw material as per Annnexure SSRMTL

NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11

NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11

SPECIFICATION NO. IS : 536-1968

SPECIFICATION NO. IS : 536-1968

0329550050 ST.RD.50x2200TO SPCN.BS:3S144-95(99)GD-S144H TEST COND.S144H .LFVD(WITH CAL.SILICATE TREATMENT %OF SULPHUR & PHOS.NOT EXCEED 0.015 & 0.03.INCLUSION RATING SHOULD ALSO NOTEXCEED THE FOLLO.LIMIT SECONDARY REFINING ST.ASPERIS:4163 -82 i.e THN/THK SUL.1.5-1,ALUMI.1.5-1 SILI:1.5-1GLO OX.2.0-1

0329550050 ST.RD.50x2200TO SPCN.BS:3S144-95(99)GD-S144H TEST COND.S144H .LFVD(WITH CAL.SILICATE TREATMENT %OF SULPHUR & PHOS.NOT EXCEED 0.015 & 0.03.INCLUSION RATING SHOULD ALSO NOTEXCEED THE FOLLO.LIMIT SECONDARY REFINING ST.ASPERIS:4163 -82 i.e THN/THK SUL.1.5-1,ALUMI.1.5-1 SILI:1.5-1GLO OX.2.0-1

• as tender document

• as tender document

CLOTH DUCK,RIP STOP,COTTON,610g,OLIVE GREEN,WATER PROOF 91cm WIDE.IND/TC/0145.

CLOTH DUCK,RIP STOP,COTTON,610g,OLIVE GREEN,WATER PROOF 91cm WIDE.IND/TC/0145.

PACKING PREFORMED OR PACKING TO D.S CAT.NO.5330-382980 SHT-1 TO 4. NOTE:-RUBBER MIXED CLAUSE AS PER CQA(ME)KIRKEE CODE OF PRACTICE (LATEST ISSUE). IFL-8039.

PACKING PREFORMED OR PACKING TO D.S CAT.NO.5330-382980 SHT-1 TO 4. NOTE:-RUBBER MIXED CLAUSE AS PER CQA(ME)KIRKEE CODE OF PRACTICE (LATEST ISSUE). IFL-8039.

PACKING, PREFORMED,OR PACKING TO D.S.CAT.NO.5330-382978 SHT -1 TO 4. IFL - 8037.

PACKING, PREFORMED,OR PACKING TO D.S.CAT.NO.5330-382978 SHT -1 TO 4. IFL - 8037.

PACKING,PREFORMED OR PACKING TO DS.CAT.NO.5330-382979 SHT-1 TO 4 . IFL 8038.

PACKING,PREFORMED OR PACKING TO DS.CAT.NO.5330-382979 SHT-1 TO 4 . IFL 8038.

S.ST.SHEET SIZE 6 MM THICK( X 1250 MM X 2500 MM) TO SPECN. STA-60 'A1' CONDITION.

S.ST.SHEET SIZE 6 MM THICK( X 1250 MM X 2500 MM) TO SPECN. STA-60 'A1' CONDITION.

VALVE AIR OR OIL PT.NO.1015-000639

VALVE AIR OR OIL PT.NO.1015-000639

GLAND TO PART NO.1015-000588

GLAND TO PART NO.1015-000588

9080081383 tube housing forgings & rough machining

DRG. NO. LFG/09/C/166

DRG. NO. LFG/09/C/166

Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072.

Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072.

Drg. No.SK-JVPC-1072.

DETACHABLE ALIGNMENT RING

DRG.NO.:ADRDE/1296-G(b) DRD/29/98.

• AS PER DRAWING/SPECIFICATION

• AS PER DRAWING/SPECIFICATION

DETACHABLE SHROUD LINK

DETACHABLE SHROUD LINK

DRG. NO.:ADRDE/1299-G(c) DRD/32/98

• As per Drawing/specification

• As per Drawing/specification

SHACKLE WITH PULLEY (BP MIRAGE)

ADRDE/302(d)

ADRDE/302(d)

Set of EBXL cables as per Annexure A

Set of EBXL cables as per Annexure A

Set of EBXL cables as per Annexure A

SPECIFICATION NO: IND/ENG/PROV/1222.

SPECIFICATION NO: IND/ENG/PROV/1222.

METAL PULLEY MKII

ADRDE/1449 (a)

ADRDE/1449 (a)

• As per Specification/Drawing

• As per Specification/Drawing

JUTE TWINE 3 PLY SPECIFICATION NO.- JUTE TWINE 3 PLY IS:9112-1984 (AMENDMENT NO. 1) (V.NO.2) (REAFFIRMED - 2001) SECOND REVISION

JUTE TWINE 3 PLY SPECIFICATION NO.- JUTE TWINE 3 PLY IS:9112-1984 (AMENDMENT NO. 1) (V.NO.2) (REAFFIRMED - 2001) SECOND REVISION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*6FOR PISTOL AUTO 9MM 1A (LT.DC.NO.02/03/19 DT.02-03-19)

INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*6FOR PISTOL AUTO 9MM 1A (LT.DC.NO.02/03/19 DT.02-03-19)

HOLSTER FOR PISTOL 9MM BERETTA & PISTOL AUTO 9MM 1A. TODS CAT. NO.1095-003146 (DC NO.26404-SA DT.10-03-08)(CONSIST OF: SHT.-1, SHT.-2, SHT.-3 & SHT.-4 )

HOLSTER FOR PISTOL 9MM BERETTA & PISTOL AUTO 9MM 1A. TODS CAT. NO.1095-003146 (DC NO.26404-SA DT.10-03-08)(CONSIST OF: SHT.-1, SHT.-2, SHT.-3 & SHT.-4 )

AS PER REQUIREMENT

AS PER REQUIREMENT

SATIN BASE PRINTED SIZE LABEL A4/1670-000109 ECAD PARA S.D 8.5 M PACK COVER CANVAS 350 X 350 X 320 MM

AS PER APPROVED SAMPLE(125 X 75 MM) AS PER TEMPLATE OF APPROVED SAMPLE ISSUED VIDE TS SECTION AMENDMENT LETTER NO. CF-1712/1/T DTD.03.11.2020

• As Per Specification/Drawing

• As Per Specification/Drawing

SATIN BASE PRINTED SIZE LABEL NIV ECAD PARA SD 8.5 M MADE WITH BLENDED FABRIC POLYESTER & COTTON (67:33) AND 100 % POLYESTER TAPE COMPLETE WITH PACK.

SPECN-AS PER APPROVED SAMPLE

SATIN BASE PRINTED SIZE LABEL CANOPY NIV ECAD PARA SD 8.5 M MADE WITH BLENDED FABRIC POLYESTER & COTTON (67:33) AND 100 % POLYESTER TAPE WITH PACK.

SPECN. AS PER APPROVED SAMPLE

PACKING BOX FOR T72 & T-90 ORDNANCE TO DRG NO. SK- 7214

PACKING BOX FOR T72 & T-90 ORDNANCE TO DRG NO. SK- 7214

SK- 7214

ST. SQR 100MM BS:3S144:95(1999)GDS144D

BS:3S144:95(1999)GDS144D

ST RD 75MM BS:3S144:95-99 GD S144H

BS:3S144:95-99 GD S144H

STEEL FL.50X25MM TO IS:5517-1993 GD-40 NI6CR4MO3.

STEEL FL.50X25MM TO IS:5517-1993 GD-40 NI6CR4MO3.

• Raw Material (as per specification)

• 1) Chemical & Mechanical properties as per std. given Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant specification.

Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD

Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD

DRG No. 0204-03-02-02-19-002-00DD

STEEL SHEET SIZE 1.25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS:513-1994 COLD ROLLED AND ANNEALED TYPE 'D' BEST SURFACE

STEEL SHEET SIZE 1.25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS:513-1994 COLD ROLLED AND ANNEALED TYPE 'D' BEST SURFACE

STEEL RD.16MM DIA CD TO SPECN.IS:6603-2001GRADE-X20CR13 OR STEEL TO SPECN. BS:970 PT.1 SEC 5 GRADE 420 S 37 (EN 56C)

STEEL RD.16MM DIA CD TO SPECN.IS:6603-2001GRADE-X20CR13 OR STEEL TO SPECN. BS:970 PT.1 SEC 5 GRADE 420 S 37 (EN 56C)

SPRING STEEL WIRE 1.3MM DIA TO SPCN. IS:4454, PART-1:2001, GRADE DH WITH UTS VALUE MIN.2300N/SQ.MM. MATL.REQUIRED FOR SPRING HELICAL COMP.RECOIL WITH DEEP ETCH TEST

SPRING STEEL WIRE 1.3MM DIA TO SPCN. IS:4454, PART-1:2001, GRADE DH WITH UTS VALUE MIN.2300N/SQ.MM. MATL.REQUIRED FOR SPRING HELICAL COMP.RECOIL WITH DEEP ETCH TEST

STEEL ROD 32MM.DIA.(+.4MM)HR.& ANNEALED(180 TO 230 VPN MAX.) TO SPECN. BS:970 PT-5:1972, 070-A72. IN STRAIGHT LENGTH 2 OR 3 METRES.A TP.TO BE SUPPLIED ACHIVING HADNESS475-525HV.AFTERHEAT TREATMENT.

STEEL ROD 32MM.DIA.(+.4MM)HR.& ANNEALED(180 TO 230 VPN MAX.) TO SPECN. BS:970 PT-5:1972, 070-A72. IN STRAIGHT LENGTH 2 OR 3 METRES.A TP.TO BE SUPPLIED ACHIVING HADNESS475-525HV.AFTERHEAT TREATMENT.

STEEL STRIP 1.8MM +_.055X 270MM +_ 0.2 WIDTH TO SPCN.IS:7226 -1974, GRADE C40 SPCL. CONTROL/TREATMENT TO SUIT REQUIRED SILICON/ALUMINIUM KILLED WITH ALUMINIUM CONTENT 0.01%(MAX).DEPTH OF DECARBURISATION WITHIN 3% ON THICKNESS/SIDES SPHER- ODISED BRIGHT ANNEALED 155 VPN.MAX

STEEL STRIP 1.8MM +_.055X 270MM +_ 0.2 WIDTH TO SPCN.IS:7226 -1974, GRADE C40 SPCL. CONTROL/TREATMENT TO SUIT REQUIRED SILICON/ALUMINIUM KILLED WITH ALUMINIUM CONTENT 0.01%(MAX).DEPTH OF DECARBURISATION WITHIN 3% ON THICKNESS/SIDES SPHER- ODISED BRIGHT ANNEALED 155 VPN.MAX

SEAMLESS TUBE WITH O.D. 50MM & I.D. 38MM X LENGTH 310(+/-1)MM TO MAT. SPECIFICATION : BS 970 PT-1:1983 , GD. 070 M-55,"T" CONDITION (EN-9) OR BS 970 PT-1:1983,GD. 080 M-40 (EN-8)HARDENED & TEMPERED TO 240-255 BHN FOR INPUT BARREL OF TGG.

SEAMLESS TUBE WITH O.D. 50MM & I.D. 38MM X LENGTH 310(+/-1)MM TO MAT. SPECIFICATION : BS 970 PT-1:1983 , GD. 070 M-55,"T" CONDITION (EN-9) OR BS 970 PT-1:1983,GD. 080 M-40 (EN-8)HARDENED & TEMPERED TO 240-255 BHN FOR INPUT BARREL OF TGG

STEEL SQUARE 30 MM X 30 MM IN R/L SPECN: IS:4432:1988, DESIG NATION 20NI7MO2 ANNEALED TO HARDNESS 217 BHN MAX.

STEEL SQUARE 30 MM X 30 MM IN R/L SPECN: IS:4432:1988, DESIG NATION 20NI7MO2 ANNEALED TO HARDNESS 217 BHN MAX.

STEEL FLAT 40 MM X 10 MM SPECN:IS:4432:1998,DESIGNATION 20NI7MO2 ANNEALED TO HARDNESS 217 BHN MAX.

STEEL FLAT 40 MM X 10 MM SPECN:IS:4432:1998,DESIGNATION 20NI7MO2 ANNEALED TO HARDNESS 217 BHN MAX.

INPUT MATERIAL FOR BUSH LOCKING SLIDE

INPUT MATERIAL FOR BUSH LOCKING SLIDE

BUSH LOCKING SLIDE

PRE MACHINING OF STOP CARTRIDGE BASE

PRE MACHINING OF STOP CARTRIDGE BASE

1015-000186

BRACKET DRG IWP 1031

BRACKET DRG IWP 1031

BRACKET DRG0001

CAM CONTROL HANDLE

CAM CONTROL HANDLE

CAM CONTROL 0001

EXTRACTOR ARTILLERY CARTRIDGE RIGHT

EXTRACTOR ARTILLERY CARTRIDGE RIGHT

EXT ART RIGHT

EXTRACTOR ARTILLERY CARTRIDGE LEFT

EXTRACTOR ARTILLERY CARTRIDGE LEFT

EXT ART LEFT

SEAMLESS TUBE WITH O.D. 50MM & I.D. 38MM X LENGTH 310(+/-1)MM TO MAT. SPECIFICATION : BS 970 PT-1:1983 , GD. 070 M-55,"T" CONDITION (EN-9) OR BS 970 PT-1:1983,GD. 080 M-40 (EN-8)HARDENED & TEMPERED TO 240-255 BHN FOR INPUT BARREL OF TGG.

SEAMLESS TUBE WITH O.D. 50MM & I.D. 38MM X LENGTH 310(+/-1)MM TO MAT. SPECIFICATION : BS 970 PT-1:1983 , GD. 070 M-55,"T" CONDITION (EN-9) OR BS 970 PT-1:1983,GD. 080 M-40 (EN-8)HARDENED & TEMPERED TO 240-255 BHN FOR INPUT BARREL OF TGG

WATER PROOF BOXES FIBRE BOARD RIGID CORRUGATED TRIPLE WALL 7 PLY 700X450X400 MM

CQA(GS)/US/460

As per the Specification IS: 2771 (Part 1) : 1990 with all amendments except that Water Proofing not required.

As per the Specification

SET OF ELECTRONIC ITEMS FOR TCRB AS PER ENCLOSURE

SET OF ELECTRONIC ITEMS FOR TCRB AS PER ENCLOSURE

CARD BOARD PACKING CASE (FOR 30-06,0.22",0.315" SPORTING RIFLE & 12 BORE PAG).

CARD BOARD PACKING CASE (FOR 30-06,0.22",0.315" SPORTING RIFLE & 12 BORE PAG).

BREECH SLIDE LOCKFOR 12 BORE PAG

BREECH SLIDE LOCKFOR 12 BORE PAG

EXTRACTOR RIGHT FOR 12 BORE PUMP ACTION GUN,

EXTRACTOR RIGHT FOR 12 BORE PUMP ACTION GUN,

EXTRACTOR LEFT FOR 12 BORE PUMP ACTION GUN

EXTRACTOR LEFT FOR 12 BORE PUMP ACTION GUN

STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUN

AS PER DRAWING

BUTT PLATE FOR 12 BORE MODIFIED PUMP ACTION GUN

BUTT PLATE FOR 12 BORE MODIFIED PUMP ACTION GUN

DIE CASTING OF TRIGGER HOUSING FOR 12 BORE MOD .PAG.

DIE CASTING OF TRIGGER HOUSING FOR 12 BORE MOD. PAG.

RFI SK.8877(SHT.1&2)

TRIGGERING PIN CATCH FOR 12 BORE PAG THROUGH MIM ROUTE

TRIGGERING PIN CATCH FOR 12 BORE PAG THROUGH MIM ROUTE

TRIGGERING CATCH PLUNGER FOR 12 BORE PAG THROUGH MIM ROUTE

TRIGGERING CATCH PLUNGER FOR 12 BORE PAG THROUGH MIM ROUTE

HAMMER FOR 12 BORE PAG, THROUGH MIM ROUTE

HAMMER FOR 12 BORE PAG, THROUGH MIM ROUTE

MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN,

MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN,

COCKING HANDLE GRIP FOR 12 BORE MODIFIED PUMP ACTION GUN

COCKING HANDLE GRIP FOR 12 BORE MODIFIED PUMP ACTION GUN

BREECH BLOCK SLIDE FOR 12 BORE PUMP ACTION GUN

BREECH BLOCK SLIDE FOR 12 BORE PUMP ACTION GUN

TRIGGER LOCKING BRACKET FOR 12 BORE PAG THROUGH MIM ROUTE

TRIGGER LOCKING BRACKET FOR 12 BORE PAG THROUGH MIM ROUTE

SLIDING KNOB FOR 12 BORE PAG THROUGH MIM ROUTE

SLIDING KNOB FOR 12 BORE PAG THROUGH MIM ROUTE

MAGAZINE TUBE LOCKING HOLDER FOR 12 BORE PAG

MAGAZINE TUBE LOCKING HOLDER FOR 12 BORE PAG

STRIKER PIN FOR 0.22'' SPORTING RIFLE

STRIKER PIN FOR 0.22'' SPORTING RIFLE

STOCK BUTT FOR .22" SPORTING RIFLE.

STOCK BUTT FOR .22" SPORTING RIFLE.

HOLDER FOR 0.22'' SPORTING RIFLE

HOLDER FOR 0.22'' SPORTING RIFLE

GUARD TRIGGER FOR 0.22'' SPORTING RIFLE

GUARD TRIGGER FOR 0.22'' SPORTING RIFLE

EXTRACTOR FOR 0.22'' SPORTING RIFLE

EXTRACTOR FOR 0.22'' SPORTING RIFLE

CATCH MAGAZINE FOR 0.22'' SPORTING RIFLE

CATCH MAGAZINE FOR 0.22'' SPORTING RIFLE

BOLT BREECH FOR 0.22" SPORTING RIFLE

BOLT BREECH FOR 0.22" SPORTING RIFLE

BODY FOR 0.22" SPORTING RIFLE

BODY FOR 0.22" SPORTING RIFLE

BAND FORE SIGHT FOR 0.22" SPORTING RIFLE

BAND FORE SIGHT FOR 0.22" SPORTING RIFLE

UPPER BLOCK BARREL OF TEAR GAS GUN

UPPER BLOCK BARREL OF TEAR GAS GUN

TRIGGER FOR TEAR GAS GUN

TRIGGER FOR TEAR GAS GUN

BUTT FOR TEAR GAS GUN

BUTT .FOR TEAR GAS GUN

PLATE BUTT FOR TEAR GAS GUN

AS PER DRAWING