SPRING SPECIAL BOF 6120761

SPRING SPECIAL BOF 6120761

M2/5360-003859. TO

SPRING L70/598 AS PER DRG NO. 6116576

SPRING L70/598 AS PER DRG NO. 6116576

6116576

TAPE TEXTILE NYLON 14 MM BS 230 KG

JSS : 8315-06 EXCEPT THAT: PICKS/DM -260-280 (2 PICKS/SHED) WEFT YARN DENIER -210 X 2 or 420 X 1

• As per Specn/Drawing

• As per Specn/Drawing

TAPE TUBULAR NYLON 27 MM BS:1600 KG

NEW TECHNICAL PARTICULAR NO ADRDE/QMS/TGTE/T/2019/01 DATED : 15 JAN 2019

TAPE NYLON 26 MM MEDIUM U/D BS : 700 KG

ADRDE/ SPECN/65

TAPE NYLON 66 26MM B.S 850 KG U/D RESIN TREATED 1.5 TO 2.5 % ROLL LENGTH 90 MTRS. (EXCLUDING SAMPLING)

SPECN.NO: ADRDE/SPECN/ 2000/54(c). Rolls length = 94 mtrs and multiples (includes testing length)

TAPE NYLON 2.5CM BS : 1364 KG STEEL GREY

IS:6349-1981

STITCHING OF NYLON STRAP BLACK(12MM WIDE X 1.5MM THICK X 1000MM LONG) WITH PAD(40 MM WIDE X 2MM THICK X 100MM LONG) ON CLAMP. NOTE:-CLAMP WILL BE PROVIDED BY OFDUN.

STITCHING OF NYLON STRAP BLACK(12MM WIDE X 1.5MM THICK X 1000MM LONG) WITH PAD(40 MM WIDE X 2MM THICK X 100MM LONG) ON CLAMP. NOTE:-CLAMP WILL BE PROVIDED BY OFDUN.

TISSUE PAPER / LENS PAPER BOOK OF 100 SHEETS- SIZE 15X10 CM EXTRA WHITE SUPERIOR QUALITY. COVER PAGE SHOULD BE OF GLAZED PAPER. ( SAMPLE TO BE SUBMITTED ALONGWITH QUOTATION )

TISSUE PAPER / LENS PAPER BOOK OF 100 SHEETS- SIZE 15X10 CM EXTRA WHITE SUPERIOR QUALITY. COVER PAGE SHOULD BE OF GLAZED PAPER. ( SAMPLE TO BE SUBMITTED ALONGWITH QUOTATION )

Post Aiming MG MK-3 to DS CAT No. 1290-000258

Post Aiming MG MK-3 to DS CAT No. 1290-000258

DS CAT No. 1290-000258

PLASTIC SLIDE FASTNERS MEDIUM SPECIAL DUTY VARIOUS SHADES KHAKI SAGE GREEN DARK GREY ETC SIZES RANGING FROM 67 CM TO 87 CM

IS:14181 PART (1 TO 3):2002

LEVER CONTROL HAND STEEL V530 1238 3019

LEVER CONTROL HAND STEEL V530 1238 3019

V530 1238 3019

SPECIFICATION NO. : GRADE "D" OF IS : 1741 - 1960 AND CIT&C/PMS/135.

SPECIFICATION NO. : GRADE "D" OF IS : 1741 - 1960 AND CIT&C/PMS/135.

GRATICULE TO DRG. NO. Y7187447

GRATICULE TO DRG. NO. Y7187447

Y7187447

GRATICULE MAKING FOR TVNE-4B TO DRG. NO. OLF/R&D/TVNE-4B/266

GRATICULE MAKING FOR TVNE-4B TO DRG. NO. OLF/R&D/TVNE-4B/266

OLF/R&D/TVNE-4B/266

GRATICULE FOR VISOR TO DRG. NO. AL7213090

GRATICULE FOR VISOR TO DRG. NO. AL7213090

GRATICULE(FINISHED) (LF-9927097817)

AS PER DRAWING NO.BL7210250

SCALE/GRATICULE (FINISHED) (LF-9927091344)

AS PER DRAWING NO.BL7210222

GRATICULE (FINISHED) (LF-9002131040)

AS PER DRAWING NO.AL7211001

GRATICULE (LF-2690000100)

AS PER DRAWING NO. AF7210723

GRATICULE BSH7210443 (LF-2690000183)

AS PER DARWING NO. BSH 7210443

GRATICULE (F) (LF- 9021131041)

AS PER DRAWING NO. 14546000003

GRATICULE (F) Y7187782 (LF-2690000192)

AS PER DRAWING NO.Y7187782

GRATICULE (F) U7187266 (LF-2690000193)

AS PER DRAWING NO. U7187266

SET FASTNERS HOOK & LOOP TAPE SYNTHETIC25 MM OG

SPECIFICATION NO :IS:8156 -2014.

AS PER RELEVANT CLAUSE OF SPECIFICATION

SOCKET FOR HARNESS

DRG.NO.ADRDE/1387 (a)

ELASTIC TAPE WHITE 40MM

IS:9686-1980

TAPE NYLON 2.5CM BS : 1364 KG STEEL GREY

IS:6349-1981

DRG.NO.:ADRDE/1297 ( b )

DRG.NO.:ADRDE/1297 ( b )

DRG. NO-ADRDE/1380.

DRG. NO-ADRDE/1380.

DRG. NO-ADRDE/1380.

YELLOW/WHITE LINE RIP PIN. (SHEET 1 OF 8)

DRG. NO.: ADRDE/1322(b) DRD/66/98.

• As per Specification/Drawing

• As per Specification/Drawing

7112305004 MED SUPPORT OF 155M MM EDP FUZE AS PER DRG NO 770 28 33 00

7112305004 MED SUPPORT OF 155M MM EDP FUZE AS PER DRG NO 770 28 33 00

DRG NO 770 28 33 00

• machines

• testing facility

BODY FOR 155PD FUZE DRG NO 140 21 31 00 IS 4431 GRADE 40C14S14 IN COLD CONDITION

BODY FOR 155PD FUZE DRG NO 140 21 31 00 IS 4431 GRADE 40C14S14 IN COLD CONDITION

BODY FOR 155PD FUZE DRG NO 140 21 31 00 IS 4431 GRADE 40C14S14 IN COLD CONDITION

EPF FOAM FOR PACKING OF PD FUZE 155MM

EPF FOAM FOR PACKING OF PD FUZE 155MM

EPF FOAM FOR PACKING OF PD FUZE 155MM

BAKELITE WASHER SIZE OD 37MM ID 8MM THICK

BAKELITE WASHER SIZE OD 37MM ID 8MM THICK

BAKELITE WASHER SIZE OD 37MM ID 8MM THICK

PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7

PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7

TEND 2449 STAR 10

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Vial Level Circular Cased MK 2 MCT 3439

Vial Level Circular Cased MK 2 MCT 3439

MCT 3439

NON FERROUS MATERIAL - ALUMINIUM-TITANIUM MASTER ALLOY (TI:B-5:1) ITEM CODE : 0620173000

ALUMINIUM-TITANIUM MASTER ALLOY (TI:B-5:1) AS PER DESIGNATED "AA" HARDENER H 2252 WITH TITANIUM 4.5% TO 5.5%,BORON 0.8% TO 1.2%,SI-0.20% MAX,FE-0.30%MAX,V-0.20% MAX OTHER TRACE ELEMENTS i.e. Zn,Mg SHOULD NOT BE EXCEED 0.10% IN TOTAL.TOTAL IMPURITIES NOT TO EXCEED 0.80% REMINDER ALUMINIUM. EACH INGOT PIECE WEIGHT 2-3 KG

NON FERROUS MATERIAL - ALUMINIUM.-TITANIUM- BORON MASTER ALLOY ROD 9.5 MM DIA (COIL FORM). ITEM CODE : 0620173002 (VIRGIN MATERIAL)

AL.-TI. BORON MASTER ALLOY ROD 9.5 MM DIA (COIL FORM) IN RUNNING LENGTH.CHEMICAL COMPOSITION AS PER DESIGNATED "AA" HARDENER H 2252 WITH TITANIUM 4.5% TO 5.5%,BORON 0.8% TO 1.2%,SI-0.20% MAX,FE-0.30% MAX,V-0.20% MAX OTHER TRACE ELEMENTS i.e. Zn, Mg SHOULD NOT BE EXCEED 0.10% IN TOTAL.TOTAL IMPURITIES NOT TO EXCEED 0.80% REMINDER ALUMINIUM. SIZE :- 9.5 +/- 0.5MM DIA ROD HAVING COIL INNER DIA 370 +/- 10 MM, COIL WIDTH 300 +/- 10 MM DIA.

NON FERROUS MATERIAL- ALUMINIUM-ZIRCONIUM MASTER ALLOY WITH ZIRCONIUM-5% +/- 0.5% ITEM CODE : 0614973000

ALUMINIUM-ZIRCONIUM MASTER ALLOY AS PER DESIGNATED "AA" HARDENER H 2607 WITH ZIRCONIUM-5% +/- 0.5%,SI-0.30% MAX, FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn,Ca SHOULD NOT TO BE EXCEED 0.10% IN TOTAL. TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDER ALUMINIUM. EACH INGOT PIECE WEIGHT 5-8 KG.

NON FERROUS MATERIAL -ALUMINIUM-CHROMIUM MASTER ALLOY WITH CHROMIUM 5% +/- 0.5%, ITEM CODE: 0625173000 (VIRGIN MATERIAL)

ALUMINIUM-CHROMIUM MASTER ALLOY AS PER DESIGNATED AA HARDENE R H 2918 WITH CHROMIUM 5% +/- 0.5%,SI-0.30% MAX,FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn SHOULD NOT BE EXCEED 0.10 % IN TOTAL.TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDER ALUMINIUM. EACH INGOT PIECE WEIGHT 5-8KG.

NON FERROUS MATERIAL - ALUMINIUM-COPPER MASTER ALLOY COPPER 47%-53%. ITEM CODE : 0621773000.(VIRGIN MATERIAL)

ALUMINIUM-COPPER MASTER ALLOY AS PER DESIGNATED AA HARDENER H 2148 WITH COPPER 47%-53%,SI-0.30% MAX,FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn SHOULD NOT BE EXCEED 0.10% IN TOTAL. TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDER ALUMINIUM. EACH INGOT PIECE WEIGHT 10KG APPX.

• As per attachment

• As per attachment

NON FERROUS MATERIAL- METALLIC SILICON WITH Si-98.5 % Min ITEM CODE : 1001711600 (VIRGIN MATERIAL)

METALLIC SILICON CONFIRMING TO SPECN. IS:2301-2000 GRADE-MSi 98.5,WITH Si-98.5 % Min.

NON FERROUS MATERIAL - MANGANESE PURE (ELECTROLYTIC) CONTENT OF Mn-99.5% ITEM CODE : 0865073000 (VIRGIN MATERIAL)

MANGANESE PURE (ELECTROLYTIC) CONTENT OF Mn-99.5% WITH CHEMICAL COMPOSITION: Al - 0.25% Max., Cu - 0.1% Max., Fe - 0.15% Max., Si - 0.02% Max., Pb - 0.005% Max., Mn - REMAINDER (NOT LESS THAN 99.5%)

• As per PQ attached

• As per PQ attached

NON FERROUS MATERIAL -MAGNESIUM PURE INGOTS 99.8% ITEM CODE : 0650000000 (VIRGIN MATERIAL)

MAGNESIUM PURE INGOTS,CONTENTS OF 99.8% MIN.TO SPECN. IS:6694-1981,EACH INGOTS WEIGHING UP TO 5 KG APPROX.

I C SKM-754*2 for Knob Gas Regulator Screw

I C SKM-754*2 for Knob Gas Regulator Screw

SKM-754*2

STEEL PLATE 8 MM THICK X 625(+/-10) MM WIDTH X 1400(+/-10)MM LENGTH TO SPECN: STEEL 20X/CA-TY-14-1-1409-75 OR STEEL SHEET "HOTCHKISS" BRAND 15CDV6(EX MIDHANI). HEAT TREATMENT TO ACHIEVE HARDNESS AS PER HEAT TREATMENT GROUP II-KT50-OST-3-1686-80.

STEEL PLATE 8 MM THICK X 625(+/-10) MM WIDTH X 1400(+/-10)MM LENGTH TO SPECN: STEEL 20X/CA-TY-14-1-1409-75 OR STEEL SHEET "HOTCHKISS" BRAND 15CDV6(EX MIDHANI). HEAT TREATMENT TO ACHIEVE HARDNESS AS PER HEAT TREATMENT GROUP II-KT50-OST-3-1686-80.

GROMMET WITH WASHER 18 MM DIA

ADRDE/2004/03(a)

ADRDE/2004/03 (a)

• As per Drawing/Specification

• As per Drawing/Specification

Body Cover Right (Air Version) as per FN Dgr. No. 3602008030

Body Cover Right (Air Version) as per FN Dgr. No. 3602008030

Dgr. No. 3602008030

ASSY DOUBLE WALL SS WATER JERRICANS TO DRG NO 6795 132 CB3138

ASSY DOUBLE WALL SS WATER JERRICANS TO DRG NO 6795 132 CB3138

FRP ASSY DRINKING WATER TANKS AND PIPE LINES TO DRG NO 6795 132 CB3101

FRP ASSY DRINKING WATER TANKS AND PIPE LINES TO DRG NO 6795 132 CB3101

CONNECTOR-PLUG D TYPE, SUB MIN IAURE DAM15P D SUB CNR, OEN MAKE, FCI OEN P ART NO. DAM15P032N JSS-50820

CONNECTOR-PLUG D TYPE, SUB MIN IAURE DAM15P D SUB CNR, OEN MAKE, FCI OEN P ART NO. DAM15P032N JSS-50820

CONNECTOR PLUG RSG-7TV AS PER SPECN. NO: AVO.364.047 TY

CONNECTOR PLUG RSG-7TV AS PER SPECN. NO: AVO.364.047 TY

Drg No.SPCNNO: AVO364047TY CONNECTOR(PLUG), RSG-10TV AS ER SPN NO AVO364047TY

Drg No.SPCNNO: AVO364047TY CONNECTOR(PLUG), RSG-10TV AS ER SPN NO AVO364047TY

9927093103 CONNECTOR 2RM24KPE19G1V1 CONNECTOR-SOCKET 2RM24KPE19G1V1 AS PER JSS NO: 50860 AS PER SPECN NO. GEO 364.126 TY WITH MATALLIC CAP INSERT MATERIAL - HARD PHENOLIC

9927093103 CONNECTOR 2RM24KPE19G1V1 CONNECTOR-SOCKET 2RM24KPE19G1V1 AS PER JSS NO: 50860 AS PER SPECN NO. GEO 364.126 TY WITH MATALLIC CAP INSERT MATERIAL - HARD PHENOLIC

SWITCH TOGGLE - PIT-1-1, SPECN NO. OUO.360.028TY

SWITCH TOGGLE - PIT-1-1, SPECN NO. OUO.360.028TY

CONNECTOR(PLUG),2RM14KPE4SH1V1 CONNECTOR-PLUG, 2RM14KPE4SH1V1J.S.S NO-50860,OTHER DETAILS ARE ASS PER SPECN.NO-OLF/AL/CON/02/F-1 .

CONNECTOR(PLUG),2RM14KPE4SH1V1 CONNECTOR-PLUG, 2RM14KPE4SH1V1J.S.S NO-50860,OTHER DETAILS ARE ASS PER SPECN.NO-OLF/AL/CON/02/F-1 .

9927090614 CONNECTOR(S)RS19TV WITH CASING CONNECTOR-SOCKET- RS19TV (WITH CASING/BACK COVER HOOD) AS PER SPECN NO: AVO.364.047 T Y

CONNECTOR(S)RS19TV WITH CASING CONNECTOR-SOCKET- RS19TV (WITH CASING/BACK COVER HOOD) AS PER SPECN NO: AVO.364.047 T Y

CONNECTOR (PLUG), RS 10 BTV SPECN. NO: AVO.364.047 TY

CONNECTOR (PLUG), RS 10 BTV SPECN. NO: AVO.364.047 TY

CONNECTOR-PLUG 2RM18B7SH1V1,J. S.S NO-50860,OTHER DETAILS ARE AS PER SPECN.NO-OLF/AL/CON/02/A.

CONNECTOR-PLUG 2RM18B7SH1V1,J. S.S NO-50860,OTHER DETAILS ARE AS PER SPECN.NO-OLF/AL/CON/02/A.

CONNECTOR(P), 2RMG18B7SH1E2B CONNECTOR-PLUG 2RMG18B7SH1E2B, AS PER SPECN.NO:OLF/AL/CON/02 /H AND JSS-50860

CONNECTOR(P), 2RMG18B7SH1E2B CONNECTOR-PLUG 2RMG18B7SH1E2B, AS PER SPECN.NO:OLF/AL/CON/02 /H AND JSS-50860

CONNECTOR PLUG 2RMG27B24SH1E2 Drg No.GEO.364.140 TU CONNECTOR PLUG 2RMG27B24SH1E2 WITH STEEL BODY AND GLASS INS ULATOR/HARD PHENOLIC INSERT AS PER SPECN. NO. GEO.364.140 TU

CONNECTOR PLUG 2RMG27B24SH1E2 Drg No.GEO.364.140 TU CONNECTOR PLUG 2RMG27B24SH1E2 WITH STEEL BODY AND GLASS INS ULATOR/HARD PHENOLIC INSERT AS PER SPECN. NO. GEO.364.140 TU

CONNECTOR PLUG 2RMG24B19SH1E2 Drg No.GEO.364.140 TU CONNECTOR PLUG 2RMG24B19SH1E2 WITH STEEL BODY AND GLASS INS ULATOR/HARD PHENOLIC INSERT AS PER SPECN. NO. GEO.364.140 TU

CONNECTOR PLUG 2RMG24B19SH1E2 Drg No.GEO.364.140 TU CONNECTOR PLUG 2RMG24B19SH1E2 WITH STEEL BODY AND GLASS INS ULATOR/HARD PHENOLIC INSERT AS PER SPECN. NO. GEO.364.140 TU

9001121295 19 PIN CONNECTOR ODU PART NO. 19 PIN CONNECTOR ODU PART NO. G82LOC-P19LFGO-0000 (FEMALE)

9001121295 19 PIN CONNECTOR ODU PART NO. 19 PIN CONNECTOR ODU PART NO. G82LOC-P19LFGO-0000 (FEMALE)

CONNECTOR SOCKET D TYPE, SUB M INIATURE, DAM15S, [EQUIVALENT TO FCI OEN MAKE NO .DAM 15S032N ]

CONNECTOR SOCKET D TYPE, SUB M INIATURE, DAM15S, [EQUIVALENT TO FCI OEN MAKE NO .DAM 15S032N ]

CONNECTOR PLUG PCB MOUNTED D T YPE, SUB MINIATURE-DAM15P500, [ EQUIVALENT TO FCI OEN MAKE NO.DAM 15P532N ]

CONNECTOR PLUG PCB MOUNTED D T YPE, SUB MINIATURE-DAM15P500, [ EQUIVALENT TO FCI OEN MAKE NO.DAM 15P532N ]

SOCKET 322C051H01

SOCKET 322C051H01

PLUG D38999/24WA35PN

PLUG D38999/24WA35PN

SOCKET 322CO54H01 SOCKET 322CO54H01

SOCKET 322CO54H01 SOCKET 322CO54H01

PLUG MS27474T16B35PA

PLUG MS27474T16B35PA

SOCKET 322C045H01

SOCKET 322C045H01

SOCKET 222C14M16

SOCKET 222C14M16

AS PER SPECIFICATION

SOCKET RP15-50GVV TO SPEC. NO. GEO364160TU

SOCKET RPS1-M-7G Drg No.ASLR.434410.022 TY SOCKET RPS1-M-7G FOR STABILIZE R 1G46 TO SPECN. NO. ASLR.434410.022 TY

SOCKET RPS1-M-7G Drg No.ASLR.434410.022 TY SOCKET RPS1-M-7G FOR STABILIZE R 1G46 TO SPECN. NO. ASLR.434410.022 TY

MICRO SWITCH PKN 105.1-1V Drg No.TAFL.642135.004TY MICRO SWITCH PKN 105.1-1V AS P ER SPECN. NO.TAFL.642135.004TY

MICRO SWITCH PKN 105.1-1V Drg No.TAFL.642135.004TY MICRO SWITCH PKN 105.1-1V AS P ER SPECN. NO.TAFL.642135.004TY

SPECN:- ADRDE/1319(a)

SPECN:- ADRDE/1319(a)

MOTOR,DPM25-HI-03 MOTOR DPM25-H1-03 ,SPECN.NO: OST 160-515.022-76

MOTOR,DPM25-HI-03 MOTOR DPM25-H1-03 ,SPECN.NO: OST 160-515.022-76

MOTOR,DID-3TV SPECN NO: 9YA0.312.006 TU

MOTOR,DID-3TV SPECN NO: 9YA0.312.006 TU

9927091303 MOTOR,D12-TF-2SERIES , AS PER SPECN. TY.232-65

9927091303 MOTOR,D12-TF-2SERIES , AS PER SPECN. TY.232-65

RESISTOR S2-29V-0.25-120 OHM Drg No.SPCNNO:OZHO467099TU RESISTOR S2-29V-0.25-120 OHM + /-0.25%-1 AS PER SPECN. NO.OZHO.467.099 TU

RESISTOR S2-29V-0.25-120 OHM Drg No.SPCNNO:OZHO467099TU RESISTOR S2-29V-0.25-120 OHM + /-0.25%-1 AS PER SPECN. NO.OZHO.467.099 TU