9001121371 CMM220F.CON.16CRP CONT AWG24TO CMM220F.CON.16CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 671/OEM PART NO.222S16M16 (NICOMATIC)

9001121371 CMM220F.CON.16CRP CONT AWG24TO CMM220F.CON.16CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 671/OEM PART NO.222S16M16 (NICOMATIC)

9001121370 CMM220 FEMALE 26 CONTACTS M16 CMM220 FEMALE 26 CONTACTS M16 FIXING H/W (HARNESS CONNECTOR) AS PER BEL PART NO. 465570650 419/ OEM PART NO. 222S26M16 (NICOMATIC)

9001121370 CMM220 FEMALE 26 CONTACTS M16 CMM220 FEMALE 26 CONTACTS M16 FIXING H/W (HARNESS CONNECTOR) AS PER BEL PART NO. 465570650 419/ OEM PART NO. 222S26M16 (NICOMATIC)

9001121369 CMM220F.CON.28CRP CONT AWG24TO CMM220F.CON.28CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 865/ OEM PART NO. 222S28M16 (NICOMATIC)

9001121369 CMM220F.CON.28CRP CONT AWG24TO CMM220F.CON.28CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 865/ OEM PART NO. 222S28M16 (NICOMATIC)

9001121368 CON CIRS THD RP MALE SHRG CON CIRS THD RP MALE SHRG 20/4 /8 (HARNESS CONNECTOR) AS PER BEL PART NO. 461573051 014 / OEM PART NO.SHRG20P4ESH8 (AMPHENOL INTERCONNECT PVT. LTD.

9001121368 CON CIRS THD RP MALE SHRG CON CIRS THD RP MALE SHRG 20/4 /8 (HARNESS CONNECTOR) AS PER BEL PART NO. 461573051 014 / OEM PART NO.SHRG20P4ESH8 (AMPHENOL INTERCONNECT PVT. LTD.

9001121367 SWITCH TGL DP ON-ON 4A SLDR SL SWITCH TGL DP ON-ON 4A SLDR SL (HARNESS COMPONENT) AS PER BEL PART NO. 471370440 178/ OEM PART NO. 12146AK-12 (APEM COMPONENTS INC)

9001121367 SWITCH TGL DP ON-ON 4A SLDR SL SWITCH TGL DP ON-ON 4A SLDR SL (HARNESS COMPONENT) AS PER BEL PART NO. 471370440 178/ OEM PART NO. 12146AK-12 (APEM COMPONENTS INC)

9001121366 CMM220F.CON.20CRP CONT CMM220F.CON.20CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370768/ OEM PART NO. 222S20M16 (NICOMATIC)

9001121366 CMM220F.CON.20CRP CONT CMM220F.CON.20CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370768/ OEM PART NO. 222S20M16 (NICOMATIC)

9001121326 10 PIN CONNECTOR FEMALE 10 PIN CONNECTOR FEMALE AIR BO RN MAKE WTB 10S ACSY, 10400 93 09 PPS

9001121326 10 PIN CONNECTOR FEMALE 10 PIN CONNECTOR FEMALE AIR BO RN MAKE WTB 10S ACSY, 10400 93 09 PPS

9001121325 10 PIN CONNECTOR MALE AIR BORN 10 PIN CONNECTOR MALE AIR BORN MAKE WTBV 10P CSY, 10400 9309 PPS

9001121325 10 PIN CONNECTOR MALE AIR BORN 10 PIN CONNECTOR MALE AIR BORN MAKE WTBV 10P CSY, 10400 9309 PPS

9001121295 19 PIN CONNECTOR ODU PART NO. 19 PIN CONNECTOR ODU PART NO. G82LOC-P19LFGO-0000 (FEMALE)

9001121295 19 PIN CONNECTOR ODU PART NO. 19 PIN CONNECTOR ODU PART NO. G82LOC-P19LFGO-0000 (FEMALE)

9001121273 MATING CABLE CONNECTOR (J3) Drg No.PART NO. RM 232-030-122-6400 MATING CABLE CONNECTOR (J3) PART NO. RM 232-030-122-6400(MALE CABLE PART) AIR BORN MA KE FOR PROXIMITY ELECTRONICS BOARD FOR IDDCA

9001121273 MATING CABLE CONNECTOR (J3) Drg No.PART NO. RM 232-030-122-6400 MATING CABLE CONNECTOR (J3) PART NO. RM 232-030-122-6400(MALE CABLE PART) AIR BORN MA KE FOR PROXIMITY ELECTRONICS BOARD FOR IDDCA

7441122040 CON CIR BAY RP F19/1.5A Drg No.BEL P/N:461570720104 CON CIR BAY RP F19/1.5A (BEL P/N:461570720104)/ OEM PART NO. DBPU1031A019-14 9E (FISHER CONNECTORS LTD.)

7441122040 CON CIR BAY RP F19/1.5A Drg No.BEL P/N:461570720104 CON CIR BAY RP F19/1.5A (BEL P/N:461570720104)/ OEM PART NO. DBPU1031A019-14 9E (FISHER CONNECTORS LTD.)

7441121520 FILTER,RFI,FL93 FILTER,RFI,FL93 (HARNESS CONNE CTOR) AS PER BEL PART NO. 453070040 132/ OEM PART NO. M15733/49-00 06 (U.S. MICROTEK COMPONENTS U SA)

7441121520 FILTER,RFI,FL93 FILTER,RFI,FL93 (HARNESS CONNE CTOR) AS PER BEL PART NO. 453070040 132/ OEM PART NO. M15733/49-00 06 (U.S. MICROTEK COMPONENTS U SA)

BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08

BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08

MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)

MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)

DS CAT NO 1005-56074

BIPOD ASSEMBLY(FOR GM 5.56MMIAI) DS CAT 1005-557897 DC(I) NO. 26610-SA DT. 07/03/12

BIPOD ASSEMBLY(FOR GM 5.56MMIAI) DS CAT 1005-557897 DC(I) NO. 26610-SA DT. 07/03/12

DS CAT 1005-557897

• Machining & assy.

• as per attached document

SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659

SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659

CAT./PT.NO.5305-016659

• Machining

• 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

INVESTMENT CASTING OF RETAINER SPRING RECOIL FOR RIFLE 5.56 MM INSAS.

INVESTMENT CASTING OF RETAINER SPRING RECOIL. FOR RIFLE 5.56 MM INSAS.

UPPER BLOCK BARREL OF TEAR GAS GUN

UPPER BLOCK BARREL OF TEAR GAS GUN

PIN LOCK DETENT 675-10-CD114

PIN LOCK DETENT 675-10-CD114

675-10-CD114

CARD BOARD PACKING CASE (FOR 30-06,0.22",0.315" SPORTING RIFLE & 12 BORE PAG).

CARD BOARD PACKING CASE (FOR 30-06,0.22",0.315" SPORTING RIFLE & 12 BORE PAG).

Mechanised Hooks and Clips with Base

As per Specification No: OPF/CLO/IAF/TRS/01

Drawing and Sampling Plan

MACHINED CASTING ITEMS FOR RED DOT SIGHT AS PER DRAWING

MACHINED CASTING ITEMS FOR RED DOT SIGHT AS PER DRAWING

OA/035/3505/RDS/MC

RUBBER ITEMS FOR RED DOT SIGHT AS PER DRAWING

RUBBER ITEMS FOR RED DOT SIGHT AS PER DRAWING

OA/035/3505/RDS/RUBBER

FORK AS PER DRAWING NO. OLF/R&D/RDS/001.05.07

DRAWING NO. OLF/R&D/RDS/001.05.07

OLF/R&D/RDS/001.05.07

STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81

STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81

• AS PER ATTACHMENT

• AS PER ATTACHMENT

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

FORGED BLANK FOR STEEL CUP 120 MM ARJUN AMMN TO DRG NO SK 1169 A

FORGED BLANK FOR STEEL CUP 120 MM ARJUN AMMN TO DRG NO SK 1169 A

INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN

INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN

DRG.NORFI.SK-8972-G

ELASTIC TAPE WHITE 40 MM SPECIFICATION NO. IS:9686-1980 (RE-AFFIRMED 2017) 1) WIDTH OF ELASTIC TAPE SHALL BE 40 MM MINIMUM 2) ELASTIC TAPE SHALL BE SUPPLIED IN ROLL OF 25 METERS EACH CONTINUOUS RUNNING LENGTH WITHOUT JOINT IN BETWEEN. AS PER SCHEDULE NO. CQA(T&C)/PMS/130 AS PER RELEVANT CLAUSE OF SPECIFICATION.

ELASTIC TAPE WHITE 40 MM SPECIFICATION NO. IS:9686-1980 (RE-AFFIRMED 2017) 1) WIDTH OF ELASTIC TAPE SHALL BE 40 MM MINIMUM 2) ELASTIC TAPE SHALL BE SUPPLIED IN ROLL OF 25 METERS EACH CONTINUOUS RUNNING LENGTH WITHOUT JOINT IN BETWEEN. AS PER SCHEDULE NO. CQA(T&C)/PMS/130 AS PER RELEVANT CLAUSE OF SPECIFICATION.

CYLINDER COMPRESSED AIR,140MM DIA WATER CAPACITY 09.0 LITRES(SEAMLESS CYLINDER ONLY)FITTED WITH VALVE AND ADAPTOR WITH HEX PROTECTION CAP FOR CHARGING HYDRO-PNEUMATIC RECUPERATOR FOR MOBILE EQUIPMENT(ADAPTOR QUANTITY ONE NUMBER FOR EVERY 5 CYLINDERS) **

CYLINDER COMPRESSED AIR,140MM DIA WATER CAPACITY 09.0 LITRES(SEAMLESS CYLINDER ONLY)FITTED WITH VALVE AND ADAPTOR WITH HEX PROTECTION CAP FOR CHARGING HYDRO-PNEUMATIC RECUPERATOR FOR MOBILE EQUIPMENT(ADAPTOR QUANTITY ONE NUMBER FOR EVERY 5 CYLINDERS) **

BRASS PRESSING BLANKS TO DRG.NO.1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG.NO.QX-1709,

BRASS PRESSING BLANKS TO DRG.NO.1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG.NO.QX-1709,

SPRING TO DRG NO QX 1669 IN F/C (WITHOUT PLATING)

SPRING TO DRG NO QX 1669 IN F/C (WITHOUT PLATING)

RING(RUBBER WASHER) IN F/C TO PT NO.QX-1492 D.C.36123-A

RING(RUBBER WASHER) IN F/C TO PT NO.QX-1492 D.C.36123-A

BRASS 8 MM DIA TO SPECN.BS-2874; CZ 122 M

BRASS 8 MM DIA TO SPECN.BS-2874; CZ 122 M

CUP INSULATING IN F/C TO DRG NO.QX-1841 DC(I) NO.36123-A

CUP INSULATING IN F/C TO DRG NO.QX-1841 DC(I) NO.36123-A

WASHER TO DRG. NO. QX-1488 IN F/CONDITION

WASHER TO DRG. NO. QX-1488 IN F/CONDITION

BRASS ROD 14 MM +/0.05 MM DIA. TO SPECN.IS 319:1989 GDE 1 HB (HALF HARD) IN STRAIGHT LENGTH OF 1.5 MTR.MIN

BRASS ROD 14 MM +/0.05 MM DIA. TO SPECN.IS 319:1989 GDE 1 HB (HALF HARD) IN STRAIGHT LENGTH OF 1.5 MTR.MIN

AMMUNITION PROTECTIVE COMPOSITION NO.219(LACQUER ADHESIVE NC WITH DYE RHODAMINE B BASE) TO SPECN. JSS-8010-48

AMMUNITION PROTECTIVE COMPOSITION NO.219(LACQUER ADHESIVE NC WITH DYE RHODAMINE B BASE) TO SPECN. JSS-8010-48

THINNER N.C. FOR PAINTS TO SPECN IS -1873 OF 1960( IN 20 LTRS PACK)

THINNER N.C. FOR PAINTS TO SPECN IS -1873 OF 1960( IN 20 LTRS PACK)

AMMUNITION PROTECTIVE COMPOSITION TO SPECN JSS-8030-20:1991(APC-5)

AMMUNITION PROTECTIVE COMPOSITION TO SPECN JSS-8030-20:1991(APC-5)

AS PER DRG & SPECIFICATION

AS PER DRG & SPECIFICATION

PACKING BOX TO DRG. NO. CO-226

PACKING BOX TO DRG. NO. CO-226

BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.

BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PACKING BOX CO 325

AS PER DRG.

PACKING BOX FOR 125 MM HEAT STABILIZERS UNIT (CO-335 A)

AS PER DRAWING

• AS PER ATTACHMENT

• AS PER ATTACHMENT

TRANSIT CAP TO GSF SK NO OTF/S/033 IN FINISH CONDITION

AS PER DRAWING

VARNISH M L-92 GOST 15865-70

VARNISH M L-92 GOST 15865-70

BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI-GLOSSY AS PER IS:168

AS PER IS:168

TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL

TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PACKING WASHER (DET-74) TO SK. NO. OTF/S/008 IN F/C

AS PER DRAWING

STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT

STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT

• AS PER ATTACHMENT

• AS PER ATTACHMENT

CONE IN FINISHED CONDITION TO DRG. NO. 4-025998 DET. 069 DC(I) 37003-A DT.11/3/05 (SK. NO. OTF/S/015) WITHOUT SURFACE TREATMENT

CONE IN FINISHED CONDITION TO DRG. NO. 4-025998 DET. 069 DC(I) 37003-A DT.11/3/05 (SK. NO. OTF/S/015) WITHOUT SURFACE TREATMENT

• AS PER ATTACHMENT

• AS PER ATTACHMENT

FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)

FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)

PLASTIC BOX TO DRG. NO: CO-426/B

PLASTIC BOX TO DRG. NO: CO-426/B

PACKING BOX (THERMOCOAL) TO DRG. NO CO-419/A

AS PER DRAWING

CO-419/A

STEEL ROD 32 MM DIA TO SPCN. TY:14-1-2884-80 IN CD

STEEL ROD 32 MM DIA TO SPCN. TY:14-1-2884-80 IN CD

TRANSIT PLUG AS PER SK.NO. M-7949 DT 29.09.95

AS PER DRG.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81

STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81

STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81

• AS PER ATTACHMENT

• AS PER ATTACHMENT

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81

STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B-84-748-81

• AS PER ATTACHMENT

• AS PER ATTACHMENT

COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)

COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX (M-9697 B)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81

STEEL ROUND 32.00 MM (+0.00MM/-0.10MM) DIA COLD DRAWN BRIGHT BAR GRADE 50 TO SPECN. TY-14-1-2884-80 & OST B 84-748-81, LENGTH OF ROD 2.4 MTRS TO 3.5 MTRS. IN STRAIGHT LONG. RODS MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETECTOR BY SUPPLIER AS PER SPECIFICATION OST B 84 748 81

• AS PER ATTACHMENT

• AS PER ATTACHMENT

TRANSIT PLUG TO SK NO M-8990 IN F/C

TRANSIT PLUG TO SK NO M-8990 IN F/C

STEEL ROD 32 MM DIA TO SPCN. TY:14-1-2884-80 IN CD

STEEL ROD 32 MM DIA TO SPCN. TY:14-1-2884-80 IN CD

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437

WOODEN PACKING BOX TO DRG. NO. CO-428

AS PER DRG

• AS PER ATTACHMENT

• AS PER ATTACHMENT

DEEP SAXE BLUE TO BS 381 C 1980 TINT 113

DEEP SAXE BLUE TO BS 381 C 1980 TINT 113

STEEL ROUND 80 MM +1 MM DIA TO SPECN. 070 M 55 TO BS-970:PT-1-1983 IN HOT ROLLED,PEELED & MAGNETICALLY CRACK DETECTION PASSED CONDN.END OF BAR SQUARE,YIED STREES-2% PRROF STRESS 650 MPA (MIN),ELONGATION-10% (MIN),LENGTH 1.2 MTR. OR IN MULTIPLE OF 300 THEREAFTER MATL. SHOULD BE FREE FROM FLAW.

STEEL ROUND 80 MM +1 MM DIA TO SPECN. 070 M 55 TO BS-970:PT-1-1983 IN HOT ROLLED,PEELED & MAGNETICALLY CRACK DETECTION PASSED CONDN.END OF BAR SQUARE,YIED STREES-2% PRROF STRESS 650 MPA (MIN),ELONGATION-10% (MIN),LENGTH 1.2 MTR. OR IN MULTIPLE OF 300 THEREAFTER MATL. SHOULD BE FREE FROM FLAW.

PLUG FUZE HOLE TRANSIT TO GSF SK NO M-5429 IN F/C

PLUG FUZE HOLE TRANSIT TO GSF SK NO M-5429 IN F/C

DUMMY PELLET IN F/C TO DRG.NO.M-10395 DT. 27.08.2005

AS PER DRG. NO. M-10395

AL ALLOY ROD 36 MM SPECN IS 733 1983 GR 24345 IN WP CONDITION MATL CLASS B OF IS 3965 1981 PPGG NOT EXCEEDING 3 5 MM DEPTH IN STRAIGHT LENGTH

AL ALLOY ROD 36 MM SPECN IS 733 1983 GR 24345 IN WP CONDITION MATL CLASS B OF IS 3965 1981 PPGG NOT EXCEEDING 3 5 MM DEPTH IN STRAIGHT LENGTH

WOODEN PACKING BOX WITH PLASTIC LINER DRG. NO CO-517

AS PER DRAWING

CO-517

FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG.NO F-495E

AS PER DRG

BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978

BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978

PAINT RM SIGNAL RED TO ISC- 537 TO SPCN. IS-138-1981

PAINT RM SIGNAL RED TO ISC- 537 TO SPCN. IS-138-1981

PAINT RM WHITE SEMI GLOSSY IS138-81

PAINT RM WHITE SEMI GLOSSY IS138-81

AS PER DRG.& SPECIFICATION

AS PER DRG.& SPECIFICATION