PROVISIONAL SPECIFICATION NO. PROV/S/2599/TC-11/2009/02 AS PER RELEVANT CLAUSE OF SPECIFICATION.

PROVISIONAL SPECIFICATION NO. PROV/S/2599/TC-11/2009/02 AS PER RELEVANT CLAUSE OF SPECIFICATION.

EYE GUARD OPTICAL INSTRUMENT AS PER DRG NO CQA(I) 789/50, MCT-2963/1 (K0000298) FOR HR BINO 8X30R

EYE GUARD OPTICAL INSTRUMENT AS PER DRG NO CQA(I) 789/50, MCT-2963/1 (K0000298) FOR HR BINO 8X30R

MCT-2963/1

OBJ. CAP RIGHT COMPLETE AS PER DRG. NO. MCT-2927/1(K0001756) FOR HR BINO

OBJ. CAP RIGHT COMPLETE AS PER DRG. NO. MCT-2927/1(K0001756) FOR HR BINO

MCT-2927/1

ISPL FOR DHANUSH.

ISPL FOR DHANUSH.

• PRINTING DOCUMENT

• NON-TEARABLE

TECHNICAL MANUAL FOR DHANUSH.

TECHNICAL MANUAL FOR DHANUSH.

• PRINTING DOCUMENT

• NON-TEARABLE

USER HANDBOOK FOR DHANUSH.

USER HANDBOOK FOR DHANUSH.

• PRINTING DOCUMENT

• NON-TEARABLE

MAINTENANCE MANUAL WORKSHOP.

MAINTENANCE MANUAL WORKSHOP.

• PRINTING DOCUMENT

• NON-TEARABLE

MAINTENANCE MANUAL FIELD SERVICE.

MAINTENANCE MANUAL FIELD SERVICE.

• PRINTING DOCUMENT

• NON-TEARABLE

TECHNICAL DESCRIOTION FOR DHANUSH.

TECHNICAL DESCRIOTION FOR DHANUSH.

• PRINTING DOCUMENT

• NON-TEARABLE

RANGE TABLE CONSOLIDATED DHANUSH.

RANGE TABLE CONSOLIDATED DHANUSH.

• PRINTING DOCUMENT

• NON- TEARABLE PAPER PRINTING

PARTS CATALOUGE 1&2.

PARTS CATALOUGE 1&2.

• PRINTING DOCUMENT

• NON-TEARABLE PRINTING

CES SERVICE EDITION FOR DHANUSH.

CES SERVICE EDITION FOR DHANUSH.

OPERATOR'S MANUAL FOR DHANUSH.

OPERATOR'S MANUAL FOR DHANUSH.

• PRINTING DOCUMENT

• NON-TEARABLE PRINTING

HISTORY SHEET (BINDER COMPLETE). HISTORY SHEET BOOK(BINDER COMPLETE) FOR DHANUSH COMPRISING- 1)BARREL/LINER HISTORY SHEET, 2)BREECH RING/JACKET HISTORY, 3)CARRIAGE/MOUNTING HISTORY, 4)DAILY RECORDS OF ROUND FIRED, 5)RECOIL SYSTEM HISTORY, 6)ELECTRONIC UPGRADATION, 7)BACKUP/DIAL SIGHT,FIRE DIRECT CONTROL SYS HISTORY.

HISTORY SHEET (BINDER COMPLETE). HISTORY SHEET BOOK(BINDER COMPLETE) FOR DHANUSH COMPRISING- 1)BARREL/LINER HISTORY SHEET, 2)BREECH RING/JACKET HISTORY, 3)CARRIAGE/MOUNTING HISTORY, 4)DAILY RECORDS OF ROUND FIRED, 5)RECOIL SYSTEM HISTORY, 6)ELECTRONIC UPGRADATION, 7)BACKUP/DIAL SIGHT,FIRE DIRECT CONTROL SYS HISTORY.

• PRINTING DOCUMENT

• NON-TEARABLE PRINTING

INSPECTION LOG BOOK FOR DHANUSH.

INSPECTION LOG BOOK FOR DHANUSH.

• PRINTING DOCUMENT

• NON-TEARABLE PRITING PAPER

Set of EBXL Insulated Cores Laid UP and FR LSZH Polyolefin Sheathed Flexible Cables Confirming to EED 50 12 and EED 50 13 as per Annexure B

Set of EBXL Insulated Cores Laid UP and FR LSZH Polyolefin Sheathed Flexible Cables Confirming to EED 50 12 and EED 50 13 as per Annexure B

STEEL ROUND 65MM DIA TO SPECN:BS:3S144-1995(1999) GRADE S144D LFVD SULPHUR-0.015, PHOSPHOROUS-0.03 SECONDARY REFINING STEEL AS PER SPECN:IS:4163-1982 INCLUSION RATING SHOULD NOT EXCEES THE FOLLOWING:LFVD WITH CALCIUM SILICATE TREATMENT. THIN/THICK SULPHIDE-1.5-1, ALUMINA.1.5-1, GLOBULAR OXIDE 2.0-1,SILICATE 1.5-1.

STEEL ROUND 65MM DIA TO SPECN:BS:3S144-1995(1999) GRADE S144D LFVD SULPHUR-0.015, PHOSPHOROUS-0.03 SECONDARY REFINING STEEL AS PER SPECN:IS:4163-1982 INCLUSION RATING SHOULD NOT EXCEES THE FOLLOWING:LFVD WITH CALCIUM SILICATE TREATMENT. THIN/THICK SULPHIDE-1.5-1, ALUMINA.1.5-1, GLOBULAR OXIDE 2.0-1,SILICATE 1.5-1.

PACKING PREFORMED TO DS CAT.NO. 5305-014097 SHT 1 TO 4

PACKING PREFORMED TO DS CAT.NO. 5305-014097 SHT 1 TO 4

SPRING HELICAL COMPRESSION TO DRG NO GCF-MN 5501(C ) REF.DRG NO. 5360-040480.

SPRING HELICAL COMPRESSION TO DRG NO GCF-MN 5501(C ) REF.DRG NO. 5360-040480.

SPRING HELICAL COMPRESSION TO DRG NO GCF-MN-5502(C) (REF.DRG NO (5360-040481).

SPRING HELICAL COMPRESSION TO DRG NO GCF-MN-5502(C) (REF.DRG NO (5360-040481).

LEVEL,FIRE CONTROL INSTRUMENT AS PER DRG.NO.:IRDE-1135/SA-1

LEVEL,FIRE CONTROL INSTRUMENT AS PER DRG.NO.:IRDE-1135/SA-1

IRDE-1135/SA-1

Elastic Black 3cm Wide Best trade quality as per provisional specification no.-S/2594/CCD army logo/TC-15(a)

Best trade quality as per provisional specification no.-S/2594/CCD army logo/TC-15(a)

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Plastic Button Reversible 19 mm in Matching printed pattern ( Thermosetting)

Plastic Button Reversible 19 mm in Matching printed pattern ( Thermosetting) Specification No- IS:1461 1984(second Revision) reaffirmed 2003, Except that shape & design as per annexure "A" attached and feel & finish as per sample held in the custody of OCFS. As per relevant clause of supplementary schedule no. CQA(GS)/SS/346(b)

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Mechanised stainless steel metal hooks and Clips with Base (press type) (item Code 1506420449)with specification : Mechanised stainless( steel metal hooks and Clips with Base (Press type) OPF Drawing No.OPF/CLO/IAF/TRS/01

Mechanised stainless steel metal hooks and Clips with Base (press type) (item Code 1506420449)with specification : Mechanised stainless( steel metal hooks and Clips with Base (Press type) OPF Drawing No.OPF/CLO/IAF/TRS/01

Fabrication of Cap Drill Khaki (Suit Danger Building)

FABRICATION OF CAP DRILL KHAKI (SUIT DANGER BUILDING) SWO PART II No. 02361/72361. SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF FLAME RETARDANT ACTION OVERALL FOR MSF

FABRICATION OF FLAME RETARDANT ACTION OVERALL FOR MSF SWO PART II No. 20234/70234. SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Coat Laboratory

FABRICATION OF COAT LABORATORY SWO PART II No. 20181/70181. SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Overall Combination Drill Khaki with Pivot Sleeves

FABRICATION OF OVERALL COMBINATION DRILL KHAKI WITH PIVOT SLEEVES. SWO PART II No. 20198/70198. SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

FABRICATION OF CAPS DANGER BUILDING WHITE PLAIN SWO PART II No. 20173/70173.

SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. SWO PART II No. 20173/70173. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

WELDING ELECTRODES SIZE: 5 MM DEPOSITING 19 CR, 9 NI & 6MN & .40 MO STAINLESS STEEL WELD METAL, SPECIFICATION NO. CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

WELDING ELECTRODES SIZE: 4 MM DEPOSITING 18 CR, 8 NI & 6MN STAINLESS STEEL WELD METAL, SPECN. CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

CC COPPER WIRE ROD 7.9/8.0 MM DIA AS PER SPECN. IS: 12444-1988 (STOCK PILE ITEM) [EACH COIL OF COPPER SHOULD NOT WEIGHT MORE THAN 2000.00 KGS.]

SPECIFICATION IS: 12444:1988

SPECIFICATION IS: 12444:1988

• The firm is required to submit a list of complete Plant and Machinery required for the production of subject store and that are available with the firm. The firm shall also submit process flow diagram for the production of subject store. Details of facilities outsourced to be brought out clearly.
• The firm is required to submit a list of complete Plant and Machinery required for the production of subject store and that are available with the firm. The firm shall also submit process flow diagram for the production of subject store. Details of facilities outsourced to be brought out clearly.
• The firm is required to submit a list of complete Plant and Machinery required for the production of subject store and that are available with the firm. The firm shall also submit process flow diagram for the production of subject store. Details of facilities outsourced to be brought out clearly.
• The firm is required to submit a list of complete Plant and Machinery required for the production of subject store and that are available with the firm. The firm shall also submit process flow diagram for the production of subject store. Details of facilities outsourced to be brought out clearly.
• The firm is required to submit a list of complete Plant and Machinery required for the production of subject store and that are available with the firm. The firm shall also submit process flow diagram for the production of subject store. Details of facilities outsourced to be brought out clearly.

• The firm is required to submit a list of testing equipments required for testing of subject store. The details of outsourced facilities to be brought out clearly.
• The firm is required to submit a list of testing equipments required for testing of subject store. The details of outsourced facilities to be brought out clearly.
• The firm is required to submit a list of testing equipments required for testing of subject store. The details of outsourced facilities to be brought out clearly.
• The firm is required to submit a list of testing equipments required for testing of subject store. The details of outsourced facilities to be brought out clearly.
• The firm is required to submit a list of testing equipments required for testing of subject store. The details of outsourced facilities to be brought out clearly.

CLAMP TO DRG NO 6745 86 5035

CLAMP TO DRG NO 6745 86 5035

ASSY BOX TO DRG NO 6755 86 CD1940

ASSY BOX TO DRG NO 6755 86 CD1940

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

SHELLAC LACQUER (APC-211) TO SPECN JSS 8010-63:1997

SHELLAC LACQUER (APC-211) TO SPECN JSS 8010-63:1997

Polypropylene Corrugated Packing Box to Drg. No. CO-454 B

Polypropylene Corrugated Packing Box to Drg. No. CO-454 B

CO-454 B

PROOF MACHINED BODY FOR 51 MM HE to DRG NO SK 8345 C

PROOF MACHINED BODY FOR 51 MM HE to DRG NO SK 8345 C

SK-8345/C

• AS PER ATTACHMENT

• AS PER ATTACHMENT

BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI GLOSSY AS PER IS 168 (LATEST REVISION), SHADE NO.359 OF IS:5 (LATEST REVISION)

BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI GLOSSY AS PER IS 168 (LATEST REVISION), SHADE NO.359 OF IS:5 (LATEST REVISION)

Polypropylene Corrugated packing box drg. no. CO-488 B

AS PER DRAWING

CO-488 A

PLUG TRANSIT TO DRG. NO. ITV-33 ALONG WITH WASHER TO DRG. NO. M-10688

PLUG TRANSIT TO DRG. NO. ITV-33 ALONG WITH WASHER TO DRG. NO. M-10688

PLUG REAR TO DRG NO ITV 52 IN FINISHED CONDITION

PLUG REAR TO DRG NO ITV 52 IN FINISHED CONDITION

FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G OR GSF DRG. NO. M-10176 B FOR BOMB 81 mm MORTAR C (EMPTY BODY)

FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G OR GSF DRG. NO. M-10176 B FOR BOMB 81 mm MORTAR C (EMPTY BODY)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

VARNISH OIL STOVING (APC-221) GR-1 TO SPECN. JSS-8010-28

VARNISH OIL STOVING (APC-221) GR-1 TO SPECN. JSS-8010-28

BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI GLOSSY AS PER IS 168 (LATEST REVISION), SHADE NO.359 OF IS:5 (LATEST REVISION)

BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI GLOSSY AS PER IS 168 (LATEST REVISION), SHADE NO.359 OF IS:5 (LATEST REVISION)

STEEL ROUND 13 MM DIA BS 970 PT-1 :1983 GR 080 M 40

STEEL ROUND 13 MM DIA BS 970 PT-1 :1983 GR 080 M 40

AL ALLOY ROD 60 MM DIA-SPECN.IS 733:1983 GR.24345

AL ALLOY ROD 60 MM DIA-SPECN.IS 733:1983 GR.24345

OBTURATING COPPER BAND 149mm (+-0.7 MM) O/D X 13 mm (+2.00 mm/-0.00MM) THICK X 450 TO 500 MM LONG TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

OBTURATING COPPER BAND 149mm (+-0.7 MM) O/D X 13 mm (+2.00 mm/-0.00MM) THICK X 450 TO 500 MM LONG TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

• As per attachment

• As per attachment

OBTURATING COPPER BAND 149mm (+-0.7 MM) O/D X 13 mm (+2.00 mm/-0.00MM) THICK X 450 TO 500 MM LONG TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

OBTURATING COPPER BAND 149mm (+-0.7 MM) O/D X 13 mm (+2.00 mm/-0.00MM) THICK X 450 TO 500 MM LONG TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

• As per attachment

• As per attachment

HEAD(TO SK. NO. OTF/S/002)DRG. NO. 4-025998 DET. NO. 002 AND DC 35862-A DT 01/12/94 IN FINISHED CONDITION (WITHOUT SURFACE TREATMENT)

HEAD(TO SK. NO. OTF/S/002)DRG. NO. 4-025998 DET. NO. 002 AND DC 35862-A DT 01/12/94 IN FINISHED CONDITION (WITHOUT SURFACE TREATMENT)

• as per attachment
• as per attachment
• as per attachment
• as per attachment
• as per attachment

• as per attachment
• as per attachment
• as per attachment
• as per attachment
• as per attachment

PAINT PFU PRIMING RED OXIDE ZINC CH. AMN. AIRDRYING

PAINT PFU PRIMING RED OXIDE ZINC CH. AMN. AIRDRYING

PAINT PFU BLACK ACID-PROOF IND/ME/651(A)DC3754-ME

PAINT PFU BLACK ACID-PROOF IND/ME/651(A)DC3754-ME

AL. ROD 17 MM +/- 0.1 MM DIA BS 1474 DESIG 2014-A "TB"

AL. ROD 17 MM +/- 0.1 MM DIA BS 1474 DESIG 2014-A "TB"

SCREW (GSF. SK. NO. OTF/S/025) DET. NO. 058 IN F/C DRG. NO. 4-025998

SCREW (GSF. SK. NO. OTF/S/025) DET. NO. 058 IN F/C DRG. NO. 4-025998

COAPLER RING GUARD 125 MM HEAT BODY COPPER BAND UPPER PORSATION AS PER DRG NO M 10859

COAPLER RING GUARD 125 MM HEAT BODY COPPER BAND UPPER PORSATION AS PER DRG NO M 10859

APC-216 (COMPN. SEALING RD 1229) TO JSS 8010-51:1987

APC-216 (COMPN. SEALING RD 1229) TO JSS 8010-51:1987

STEEL ROUND 30.10 MM DIA ( TOL. GRADE h8) TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH. LONG STRAIGHTNESS OF ROD : 0.35 mm OR LESS PER 1000 MM. SHORT STRAIGHTNESS :0.1MM OR LESS PER 300 MM. RODS REQD TO 100% US TEST AS PER OST B-84-748-81.

STEEL ROUND 30.10 MM DIA ( TOL. GRADE h8) TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH. LONG STRAIGHTNESS OF ROD : 0.35 mm OR LESS PER 1000 MM. SHORT STRAIGHTNESS :0.1MM OR LESS PER 300 MM. RODS REQD TO 100% US TEST AS PER OST B-84-748-81.

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978

BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978

VARNISH OIL STOVING (APC-221) GR-1 TO SPECN. JSS-8010-28

VARNISH OIL STOVING (APC-221) GR-1 TO SPECN. JSS-8010-28

As per drg. NO: M-10394

As per drg. no. M-10394

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-475

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-475

PAINT TURQUOISE BLUE RMAD SG 168/73

PAINT TURQUOISE BLUE RMAD SG 168/73

OVERHAULING OF FIRING MECHANISMS ASSY TO DRG NO 2A46 Cd10 20Cb WITH REPLACE OF OLD CONTACTOR & ELECTROMAGNET WITH NEW ONS

OVERHAULING OF FIRING MECHANISMS ASSY TO DRG NO 2A46 Cd10 20Cb WITH REPLACE OF OLD CONTACTOR & ELECTROMAGNET WITH NEW ONS

2A46 Cd10 20Cb

Fabrication of Coat Drill Khaki DB staff

FABRICATION OF COAT DRILL KHAKI DANGER BUILDING STAFF – 242 Nos. SWO PART II No. 20147/70147.

Fabrication of D/B Coat Cotton Drill White

FABRICATION OF D/B COAT COTTON DRILL WHITE - 4632 Nos SPECIFICATION: SWO PART No. 20136 /70136 (IFD

AS PER SPECIFICATION ENCLOSED.

• AS PER SPECIFICATION ENCLOSED.

• AS PER SPECIFICATION ENCLOSED.

Bullet Proof Glasses with Rubber Beading BP SML 4X4 Consisting of wind shield glass Drg No- LA/BPV/SML/GLASS/001/A qty.-2/Veh. , Driver & Co-driver glass Dr. No- LA/BPV/SML/GLASS/002/A 2 qty-2/Veh,,Side glass DR. No- LA/BPV/SML/GLASS/003/A qty-4/veh, ,Rear glass DR. NO- LA/BPV/SML/GLASS/004/A QTY-2/Veh & as per specification No.VFJ/R&D/LA/SP/BPV/GLASS/SML (4X4) dtd-14/06/2019 (Amendment no. 01 dated 20-01-2020)

SPECIFICATION NO. VFJ/R&D/LA/SP/BPV/GLASS/SML(4X4), DATED:14/06/2019 (Amendment no. 01 dated 20-01-2020)

(i) LA/BPV/SML/GLASS/001/A (ii) LA/BPV/SML/GLASS/002/A (iii) LA/BPV/SML/GLASS/003/A (iv) LA/BPV/SML/GLASS/004/A

FABRICATION OF COAT DRILL WHITE SUIT DANGER BUILDING SWO PART II No. 20129/70129.

SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. SWO PART II No. 20129/70129. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

• REFER ANNEXED SPECIFICATION.

• REFER ANNEXED SPECIFICATION.

FABRICATION OF COAT DRILL WHITE (SUIT DANGER BUILDING FOR A.F. KHADKI) SWO PART II No. 20209/70209.

SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. SWO PART II No. 20209/70209. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Dust Coat DB White

FABRICATION OF DUST COAT DANGER BUILDING WHITE. SWO PART II No. 20210/70210. SPECIFICATION: NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

cover protective dust and moisture seal MCT 2952 1

cover protective dust and moisture seal MCT 2952 1

cover protective dust and moisture seal MCT 2951 1

cover protective dust and moisture seal MCT 2951 1

CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CMS MINIMUM EXCLUDING SELVEDGES

SPECIFICATION NO. OCFAV/FABRIC/005

WELDING OF TRIANGULAR STAY,4071918.

WELDING OF TRIANGULAR STAY,4071918.

JUNCTION BOX SS 304,EX ENCLOSURE 200 X 250 X 121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.LCP ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO, SELECTOR SWITCH 0-I,2POSITION WITH 1NO+1NC,COLOUR BLACK BARTEC 07-3323-4400+05-0003-0009-1NO,SCRERWLESS TERMINALS ST 2.5 COLOUR GRAY PHOENIX 3031212-25 NOS.END PLATE PHOENIX 3030417-1NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28 NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3 NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

JUNCTION BOX SS 304,EX ENCLOSURE 200 X 250 X 121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.LCP ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO, SELECTOR SWITCH 0-I,2POSITION WITH 1NO+1NC,COLOUR BLACK BARTEC 07-3323-4400+05-0003-0009-1NO,SCRERWLESS TERMINALS ST 2.5 COLOUR GRAY PHOENIX 3031212-25 NOS.END PLATE PHOENIX 3030417-1NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28 NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3 NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

JUNCTION BOX SS304, EX ENCLOSURE 330X300X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40 DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.75 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,EX LABEL LAMINATED PAPER 1 NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-75 NOS. END PLATE PHOENIX 3030417-4 NOS,END CLAMP PHOENIX 3022218-4 NOS,MARKERS PHOENIX 1050017-79NOS SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-4NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

JUNCTION BOX SS304, EX ENCLOSURE 330X300X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40 DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.75 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,EX LABEL LAMINATED PAPER 1 NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-75 NOS. END PLATE PHOENIX 3030417-4 NOS,END CLAMP PHOENIX 3022218-4 NOS,MARKERS PHOENIX 1050017-79NOS SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-4NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

JUNCTION BOX SS304,EX ENCLOSURE 200X250X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB II C,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO. 25 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS,DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-25 NOS,END PLATE PHOENIX 3030417-2NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

JUNCTION BOX SS304,EX ENCLOSURE 200X250X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB II C,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO. 25 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS,DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-25 NOS,END PLATE PHOENIX 3030417-2NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

• machining & assy.

• As per attached document of manufacturing & testing.

PIN STRAIGHT HEADLESS GAS BLOCK TO DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION)

PIN STRAIGHT HEADLESS GAS BLOCK TO DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION)

DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION