COTTON PADDING 2" THICK 135 CM WIDTH

SPECN-APPROVED QUALITY

• AS PER SPECIFICATION

• AS PER SPECIFICATION

QUICK RELEASE UNIT

SPECN.NO.: ADRDE/1369(a) DRD/26/98.

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION.,

EXTRACTOR SPRING TO DS CAT NO. 5360-000525 IN FINISHED CONDITION.,

DS CAT NO. 5360-000525

• Coiling

• Chemical and Mechanical prosperities as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

PIN CONNECTING TO CAT SECTION CAT/PART NO 14/5315-001704 AND DRG/ CAT NO 23705

PIN CONNECTING TO CAT SECTION CAT/PART NO 14/5315-001704 AND DRG/ CAT NO 23705

DRG/ CAT NO 23705

• "Firm should have the following in-house manufacturing facilities for manufacturing of the item. Milling Machine (Essential Criteria)"
• "Firm should have the following in-house manufacturing facilities for manufacturing of the item. Lathe Machine (Essential Criteria)"
• "Firm should have the following in-house manufacturing facilities for manufacturing of the item. Arc Welding Machine (Essential Criteria)"

• "Firm Should have the following in-house facility or arrange from outside and necessary tie up letter to be submitted. i.e. Firm should have Chemical, Metallurgical & Mechanical testing Laboratory or tie up with other firms for the same."
• "Firm Should have the following in-house facility or arrange from outside and necessary tie up letter to be submitted. i.e. Firm should have Galvanizing & Chromatizing Facility or tie up with other firms for the same."

PIN CONNECTING TO CAT SECTION AND CAT PART NO 14/ 5315- 001703 AND DRG CAT NO 24018

PIN CONNECTING TO CAT SECTION AND CAT PART NO 14/ 5315- 001703 AND DRG CAT NO 24018

DRG CAT NO 24018

• "Firm should have the following in-house manufacturing facilities for manufacturing of the item. Milling Machine (Essential Criteria)"
• "Firm should have the following in-house manufacturing facilities for manufacturing of the item. Lathe Machine (Essential Criteria)"
• "Firm should have the following in-house manufacturing facilities for manufacturing of the item. Forging Facility-Open Die forging 500 Ton minimum capacity (Essential Criteria)"

• "Firm Should have the following in-house facility or arrange from outside and necessary tie up letter to be submitted. i.e. Firm should have Chemical, Metallurgical & Mechanical testing Laboratory or tie up with other firms for the same."
• "Firm Should have the following in-house facility or arrange from outside and necessary tie up letter to be submitted. i.e. Firm should have Galvanizing & Chromatizing Facility or tie up with other firms for the same."

SCREW DETONATOR RETAINING TO CQA (A) DRG. NO. 13154-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)

SCREW DETONATOR RETAINING TO CQA (A) DRG. NO. 13154-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

METAL COMPONENT SPRING

SPECN-ADRDE/1.6.01.01.02-02

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

COMBINATION HARNESS THROUGH TRADE ASSISTANCE FOR STITCHING ONLY

SPECN-DMSRD&E/T&DS/93/410(B)

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

SET OF GASKETS AS PER ANNEXURE GKT1 OF KAVACH MOD II 08 Sets

SET OF GASKETS AS PER ANNEXURE GKT1 OF KAVACH MOD II 08 Sets

• i) Rubber Moulding ii) Die making In case tenderer is outsourcing any/some of the above activities, copy of the agreement with such source shall be submitted. The Rubber moulding facility is mandatory

• (i) Standard Measuring Instruments & Gauges (ii) Rubber Testing Facility with NABL/IRMRA accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced

MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC1 FOR KAVACH MOD II, QTY: 08 SETS

MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC1 FOR KAVACH MOD II, QTY: 08 SETS

ANNEXURE STC1

• i) Foundry Facility for Steel Casting ii) Heat Treatment Facility iii) Conventional/CNC machining iv) Surface Treatment In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory.

• (i) Measuring Instruments/CMM & Gauges (ii) Radiography Testing Facility duly certified by Government (iii) Material Chemical & Physical facility with NABL accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced.

MANUFACTURING AND SUPPLY OF SET OF STAINLESS STEEL PLATE AS PER ANNEXURE SSP1 FOR KAVACH MOD II , QTY: 08 Sets

MANUFACTURING AND SUPPLY OF SET OF STAINLESS STEEL PLATE AS PER ANNEXURE SSP1 FOR KAVACH MOD II , QTY: 08 Sets

• (i)Conventional /CNC machining Facility (ii) Grinding Facility In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory

• (i) Standard Measuring Instruments & Gauges (ii)Material Chemical & Physical facility with NABL accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced

Striker Mechanism Housing Modified (NAD 7606/6) Zinc Alloy- Alloy-"A", BS:1004:1955 as per Drg No. SK- 5741*. Die Casting

Striker Mechanism Housing Modified (NAD 7606/6) Zinc Alloy- Alloy-"A", BS:1004:1955 as per Drg No. SK- 5741*. Die Casting

Drg No. SK- 5741*. Die Casting

• Die Casting

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

MANUFACTURING & SUPPLY OF SET OF HEAVY MACHINING ITEMS AS PER ANNEXURE MH1 FOR KAVACH MOD II , QTY: 08 SETS

MANUFACTURING & SUPPLY OF SET OF HEAVY MACHINING ITEMS AS PER ANNEXURE MH1 FOR KAVACH MOD II , QTY: 08 SETS

• (i) Heat treatment Facility (ii) Coventional/CNC Machining (iii)Grinding iv) Surface Treatment Facility v) Hard Chrome Plating vi) Nitriding vi) Gear Cutting In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory

• (i) Measuring Instruments/CMM & Gauges (ii) Material Chemical & Physical facility with NABL accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced

MANUFACTURING AND SUPPLY OF SET OF FABRICATION WELDING AND MACHINING ITEMS AS PER ANNEXURE SWF2 FOR KAVACH MOD II FOR QTY 08 SETS

MANUFACTURING AND SUPPLY OF SET OF FABRICATION WELDING AND MACHINING ITEMS AS PER ANNEXURE SWF2 FOR KAVACH MOD II FOR QTY 08 SETS

• i)Heat Treatment facility ii) Conventional/CNC machining iii) Welding iv) Surface Treatment facility In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory

• i) Measuring Instruments/CMM & Gauges ii) Material Chemical & Physical facility with NABL accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced

9069112607 UPPER MOUNTING PLATFORM

9069112607 UPPER MOUNTING PLATFORM

• 9069112607 UPPER MOUNTING PLATFORM

• 9069112607 UPPER MOUNTING PLATFORM

GUN SHIELD TO DRG NO GCF AD 230 026

GUN SHIELD TO DRG NO GCF AD 230 026

• GUN SHIELD TO DRG NO GCF AD 230 026

• GUN SHIELD TO DRG NO GCF AD 230 026

Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768

Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768

Drg. No. CQA(I)393/8

• Machining

• 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE

PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE

DRG.NO. CQA(I)393/4

• Machining
• Moulding

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 58CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 58CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS HEAVY DUTY CLOSED END AUTO LOCK KHAKI 36 CM , SPECIFICATION NO. - IS:14181 (PART 1 TO 3) 2002 WITH AMENDMENT NO. 2, MARCH 2008

PLASTIC SLIDE FASTENERS HEAVY DUTY CLOSED END AUTO LOCK KHAKI 36 CM , SPECIFICATION NO. - IS:14181 (PART 1 TO 3) 2002 WITH AMENDMENT NO. 2, MARCH 2008

• ATTACHED

• ATTACHED

RIBBED CUFF WOOLLEN KHAKI 15X10 CMS CIT&C/TC-12/11

RIBBED CUFF WOOLLEN KHAKI 15X10 CMS CIT&C/TC-12/11

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

7107006009 MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC2 FOR KAVACH MOD II

7107006009 MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC2 FOR KAVACH MOD II

• (i) Foundry Facility for Aluminium Casting (ii) Heat Treatment Facility (iii) Conventional/CNC machining (iv) Surface Treatment In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The foundry facility is mandatory.

• (i) Measuring Instruments/CMM & Gauges (ii) Radiography Testing facility duly certified by the Government (iii) Material Chemical & Physical facility with NABL accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced.

Composite Barrier Non Woven Fabric 70GSM Width 160 CMS White( Clothing for Protection Against Contact With Blood And Body Fluids As per ISO: 16603

As per ISO: 16603

• Web Formation Technology
• Bonding Technology
• Lamination Tehnology

• Thickness
• Gram Per Square Meter
• Synthetic Blood Penetration Resistance Test

MANUFACTURING AND SUPPLY OF SET OF ALUMINIUM CASTING ITEMS AS PER ANNEXURE ALC1 FOR KAVACH MOD II

MANUFACTURING AND SUPPLY OF SET OF ALUMINIUM CASTING ITEMS AS PER ANNEXURE ALC1 FOR KAVACH MOD II

• 1) Foundry Facility for Aluminium Casting 2) Heat Treatment facility 3) Conventional/CNC machining 4) Surface Treatment

• 1) Measuring Instruments/CMM & Gauges 2) Radiography Testing facility duly certified by the Government 3) Material Chemical & Physical facility with NABL accreditation

COVER PART NO 1155764

AS PER PART A

• AS PER ANNEXURE L

• AS PER ANNEXURE L

FORGING FOR BODY DRG NO 765-15-157 3

AS PER DRG NO 765-15-157 3

DRG NO 765-15-157 3

• AS PER DRG NO 765-15-157 3

• AS PER DRG NO 765-15-157 3

FORGING FOR DRIVE SHAFT DRG NO FG-765-15-152-3

AS PER DRG NO FG-765-15-152-3

DRG NO FG-765-15-152-3

• AS PER DRG NO FG-765-15-152-3

• AS PER DRG NO FG-765-15-152-3

FORGING FOR SUN GEAR FG-765-15-5-3

AS PER DRG FG-765-15-5-3

• AS PER DRG FG-765-15-5-3

• AS PER DRG FG-765-15-5-3

lock as per olf std 243

lock as per olf std 243

lock as per olf std 243

• AS PER OFB LETTER ANNXURE 1

• AS PER OFB LETTER ANNEXU8RE 1

CARRIER FORGING TO DRG NO 765 -15-156- 3

AS PER DRG NO 765 -15-156- 3

DRG NO 765 -15-156- 3

• AS PERDRG NO 765 -15-156- 3

• AS PER DRG NO 765 -15-156- 3

Tape Nylon 15 mm BS 185 KG U/D

The Tape shall be in continuous length of 110 M (Excluding Sampling) Without Any Flag Otherwise That Roll Be Treated As Short Length. ADRDE/QMS/TGTE/T/2019/02 Date: 10/05/2019

• As per Specification/Drawing

• As per Specification/Drawing

Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

• MIM ROUTE
• Chemical and mechanical properties as per std. given drawing.

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

LEVER CATCH MAGAZINE DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

0204 03 04 19 23 002 00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Rear sight Drg no. 0204 03 04 00 01 005 00DA for JVPC 5.56MM (MIM Route)

Rear sight Drg no. 0204 03 04 00 01 005 00DA for JVPC 5.56MM (MIM Route)

0204 03 02 00 01 005 00DD

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10

PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10

• Machining & assy.

• as per attached document

ALUMINIUM KEEL IN 3 INTERLOCKING SECTION COMPLETE WITH LOCKING PLATE & FASTENERS

ALUMINIUM as per IS 737, Marine Grade Locking Plate, Keel Hook and Nut & Bolt SS 316 Grade As per NCD 4006 Issu-3 Mar 2014

• As per Specification/Drawing

• As per Specification/Drawing

LINKAGE SYSTEM PART NO 1137083

LINKAGE SYSTEM AS PER THE DESCRIPTION AND BILL OF MATERIAL (enclosed) OF PART NO 1137083.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

LOADING PENDULAM TO PART NO.1145142

LOADING PENDULAM TO PART NO.1145142 (EXCLUDING HYDRAULIC CYLINDER LOADING TRAY-1145452)

• AS PER ANNEXURE L

• AS PER ANNEXURE L

DRAWBAR TO PT.NO.1143440

DRAWBAR TO PT.NO.1143440, AS PER ANNEXURE NO. DHANUSH/ 1143440/2017.

• AS PER ANNEXURE L

• DRAWBAR TO PT.NO.1143440

9081001538 COLLAPSIBLE YOKE TO PART NO 6387168

9081001538 COLLAPSIBLE YOKE TO PART NO 6387168

• AS PER ANNEXURE L

• AS PER ANNEXURE L

CASTOR WHEEL ARM RIGHT PT NO1130431

CASTOR WHEEL ARM RIGHT PT NO1130431

• AS PER ANNEXURE L

• AS PER ANNEXURE L

CASTOR WHEEL ARM LEFT PT NO 1130430.

CASTOR WHEEL ARM LEFT PT NO 1130430.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

COPPER WIRE ROD 7.9/8MM DIA AS PER SPECIFICATION IS 12444:1988

COPPER WIRE ROD 7.9/8MM DIA AS PER SPECIFICATION IS 12444:1988

SPECIFICATION IS 12444:1988

• Refer to attachment
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

• Refer to attachmentAS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001

OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001

DS-CATNO.4930-000799

• Machining and Fabrication work

• Chemical and Mechanical prosperities as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46 MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET- CH TESTING TO CON IS 13015:1991 & NMIR TEST (ANNEXURE-A ENCL)

SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET- CH TESTING TO CON IS 13015:1991 & NMIR TEST (ANNEXURE-A ENCL)

SPECIFICATION JSS 9510-06:2000 (REV NO.3)CODE REF "B"

• Melting and Rolling

• Chemical and Mechnacial properties as per std.given drawing

QUICK RELEASE CONNECTOR (FOR PILOT PARA JAGUAR A/C.)

SPCN.NO.AS PER ADRDE/1455

• As per Specification/Drawing

• As per Specification/Drawing

BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA(A) DRG. NO.13021-0-0.DC(I). NO.35218-A DT.13-11-91. WITH CUP BOOSTER TO CQA(A) DRG.NO.13032-0-0.DC(I). NO.36804-A DT.1-1-02.SPECN. NO. MIL-F-46996 B(MU),AIDEMEMOIRE B/14 AND CQA(A)PROOF SCHEDULE NO. CQA (A)/PS/FZ/120/5 (PROVISIONAL)

BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA(A) DRG. NO.13021-0-0.DC(I). NO.35218-A DT.13-11-91. WITH CUP BOOSTER TO CQA(A) DRG.NO.13032-0-0.DC(I). NO.36804-A DT.1-1-02.SPECN. NO. MIL-F-46996 B(MU),AIDEMEMOIRE B/14 AND CQA(A)PROOF SCHEDULE NO. CQA (A)/PS/FZ/120/5 (PROVISIONAL)

BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA(A) DRG. NO.13021-0-0.DC(I). NO.35218-A DT.13-11-91

• AS PER PQ

• AS PER QMI

JEWELL TO DRG. NO. MCT-794.

JEWELL TO DRG. NO. MCT-794.

MCT-794.

• As per Sl No. 48 of Annexure-A of OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019

• As per Sl No. 48 of Annexure-A of OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019

SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB

SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB

DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215

• Forming

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB

SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB

DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713

• Spring Manufacturing Machine

• -Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE

NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE

DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796

• Machining

• 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429 Item Code-7012907618)

Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429 Item Code-7012907618)

1345-000429

• Electrical Testing Equipment( Molding Machingh Electrical tech & Assy.,

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)

STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)

• Melting & Rolling

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB

BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB

DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217

• Machining

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

SPRING LOCK AS PER DRG.NO.CQA (I)-393/23,CAT/PT.NO.-5340-014213 for devicd firing IB ()

SPRING LOCK AS PER DRG.NO.CQA (I)-393/23,CAT/PT.NO.-5340-014213 for devicd firing IB ()

DRG.NO.CQA (I)-393/23,CAT/PT.NO.-5340-014213

• Forming & Machining

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

Fabric cotton grey mercerized, 95- 117 gsm.

ADRDE/QMS/TGTE/F/2019/04 dated :-17/05/2019 Except that: (i) “The roll length is specified as minimum 100 mtr.” (ii) Fabric width 94 cm.

ADRDE/QMS/TGTE/F/2019/04 dated :-17/05/2019 Except that: (i) “The roll length is specified as minimum 100 mtr.” (ii) Fabric width 94 cm.

• As per Specification/Drawing

• As per Specification/Drawing

RING RETAINING AS PER DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879 FOR ARMATURE OF DEVICE FIRING

RING RETAINING AS PER DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879 FOR ARMATURE OF DEVICE FIRING

DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879

• Press Cutting & Plating

• 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20

STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20

• Melting & Rolling

• 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB

SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB

DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713

• Spring Manufacturing Machine

• -Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB

SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB

DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657

• Machining

• Chemical & Mechanical properties as per Std. Given drawing
• Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing

SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB

SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB

DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656

• Machining

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

WINDING ARMATURE AS PER DRG.NO.CQA (I)-393/SA-4, CAT/PT.NO.2920-002194 FOR DEVICE FIRING IB

WINDING ARMATURE AS PER DRG.NO.CQA (I)-393/SA-4, CAT/PT.NO.2920-002194 FOR DEVICE FIRING IB

DRG.NO.CQA (I)-393/SA-4, CAT/PT.NO.2920-002194

• Winding

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB

SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB

DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215

• Forming

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699

PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699

DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699

• Machining

• 1-Chemical & Mechanical properties as per std. Given drawing. 2- Dimensional Inspection ,for all dimensions given In drawing & other parameter which are mentioned In relevant drawing

PRISM TO DRG NO MCT 2550 3

PRISM TO DRG NO MCT 2550 3

• PRECISION OPTICAL POLISHING

• PRECISION OPTICAL POLISHING ASSOCIATED INSPECTION

CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470

CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470

TEND 2644 AND FORGING DRAWING RFI SK 7470

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR6 WITH FIRMS MATERIAL

UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR6 WITH FIRMS MATERIAL

K 2080STAR6

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

DIA 6MM SS WIRE ROD IS6528-1972 GR 04 CR 18 NI 10 FULLY SOFTENED

DIA 6MM SS WIRE ROD IS6528-1972 GR 04 CR 18 NI 10 FULLY SOFTENED

• Melting & Rolling

• Chemical & Mechanical properties as per std. given drawing
• Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing

SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H

SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H

01

• Melting & Rolling

• Chemical & Mechanical properties as per std. given drawing.
• Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing

SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB

SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB

DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657

• Machining

• Chemical & Mechanical properties as per Std. Given drawing
• Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing

SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10

SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10

• Melting & rolling

• 1-Chemical & Mechanical properties as per std. Given drawing. 2- Dimensional Inspection ,for all dimensions given In drawing & other parameter which are mentioned In relevant drawing.

PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE

PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE

DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702

• Machining

• 1-Chemical & Mechanical properties as per std. Given drawing. 2- Dimensional Inspection ,for all dimensions given In drawing & other parameter which are mentioned In relevant drawing.

Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012 Specification :- IND/TC/4552 (m) & Approved Sample

Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012 Specification :- IND/TC/4552 (m) & Approved Sample

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

ELECTROMAGNET YEK -80.

ELECTROMAGNET YEK -80. DRG.NO.YEK.80.000.GCH-1 FOR T-90,CODE-94

DRG.NO.YEK.80.000.GCH-1

• AS PER DRAWING SPECIFICATION

• AS PER DRAWING SPECIFICATION

PROOF MACHINED CASTING FOR HOUSING TO DRG.NO.188-94-001-10

DRG.NO.188-94-001-10

DRG.NO.188-94-001-10

• as per drawing specification

• as per drawing specification

GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA, DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDIT ION.

GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA, DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDIT ION.

DS CAT NO.1005-560701

• as per attached document

• as attached document

RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510-06-2012 CODE REF .B. T - I COND. WITH COMPOSITION N RESTRICTION S%=0.01 MAX., P%=0.015MAX & (S+P)%=0.022MAX. ANNEXURE NO. 7158/DDO/LMG 5.56MM BARREL FOR TESTING PARA ENCLOSED., QUALITY AOD/VOD.

SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.

• Melting & Rolling

• as per attached document

STEEL FORGED TRIGGER TO DRG NO.SK-5294*D.A. 11/2020.

STEEL FORGED TRIGGER TO DRG NO.SK-5294*D.A. 11/2020.

• Machining & Assy.

• As per attached manufacturing testing document

SHAFT TO DRG NO. 166.29.305CB

SHAFT TO DRG NO. 166.29.305CB

166.29.305CB

• ATTACHED

• ATTACHED