6241
107/028/PV(A)/EOI/19-20
Gun and Shell Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
STEEL ROUND 30 POINT 10 MM DIA TOL GRADE h8
Description
STEEL ROUND 30.10 MM DIA ( TOL. GRADE h8) TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH. LONG STRAIGHTNESS OF ROD : 0.35 mm OR LESS PER 1000 MM. SHORT STRAIGHTNESS :0.1MM OR LESS PER 300 MM. RODS REQD TO 100% US TEST AS PER OST B-84-748-81.
Specification
STEEL ROUND 30.10 MM DIA ( TOL. GRADE h8) TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH. LONG STRAIGHTNESS OF ROD : 0.35 mm OR LESS PER 1000 MM. SHORT STRAIGHTNESS :0.1MM OR LESS PER 300 MM. RODS REQD TO 100% US TEST AS PER OST B-84-748-81.
Testing / Inspection Facility
03
20000
Kilogram
VARNISH
Description
VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997
Specification
VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997
Testing / Inspection Facility
10
500
Litre
VARNISH
Description
VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997
Specification
VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997
Testing / Inspection Facility
10
500
Litre
BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN IS 168 1973 ISC NO 102 TO SPECN IS 5 1978
Description
BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978
Specification
BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978
Testing / Inspection Facility
10
494
Litre
VARNISH OIL STOVING
Description
VARNISH OIL STOVING (APC-221) GR-1 TO SPECN. JSS-8010-28
Specification
VARNISH OIL STOVING (APC-221) GR-1 TO SPECN. JSS-8010-28
Testing / Inspection Facility
10
464
Kilogram
Plug Representing Fuze in FC TO DRG NO M 10394
Description
As per drg. NO: M-10394
Specification
As per drg. no. M-10394
Testing / Inspection Facility
60
1056
Number
POLYPROPYLENE CORRUGATED PACKING BOX CO 475
Description
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-475
Specification
POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-475
Testing / Inspection Facility
14
52
Number
PAINT TURQUOISE
Description
PAINT TURQUOISE BLUE RMAD SG 168/73
Specification
PAINT TURQUOISE BLUE RMAD SG 168/73
Testing / Inspection Facility
10
7
Kilogram
6242
TE No 190250T7PO
Gun Carriage Factory
The General Manager,
6243
ORDFYS/OCFAV/1920/PV/03/077ADV1920 Dt.24.01.2020
Ordnance Clothing Factory Avadi
The General Manager,
Name
Code
Quantity
Approx Value
Select
Fabrication of Coat Drill Khaki DB staff
Description
Fabrication of Coat Drill Khaki DB staff
Specification
FABRICATION OF COAT DRILL KHAKI DANGER BUILDING STAFF – 242 Nos.
SWO PART II No. 20147/70147.
Testing / Inspection Facility
21
242
Number
Fabrication of DB Coat Cotton Drill White
Physical Verification needed
Description
Fabrication of D/B Coat Cotton Drill White
Specification
FABRICATION OF D/B COAT COTTON DRILL WHITE - 4632 Nos
SPECIFICATION:
SWO PART No. 20136 /70136 (IFD
Drawing no.
AS PER SPECIFICATION ENCLOSED.
Manufacturing Technology
AS PER SPECIFICATION ENCLOSED.
Testing / Inspection Facility
AS PER SPECIFICATION ENCLOSED.
21
4632
Number
6244
SML/2020/02
Vehicle Factory Jabalpur
The Sr.General Manager,
Name
Code
Quantity
Approx Value
Select
BULLET PROOF GLASSES WITH RUBBER BEADING for BP SML LF No 9413100018000
Description
Bullet Proof Glasses with Rubber Beading BP SML 4X4 Consisting of wind shield glass Drg No- LA/BPV/SML/GLASS/001/A qty.-2/Veh. , Driver & Co-driver glass Dr. No- LA/BPV/SML/GLASS/002/A 2 qty-2/Veh,,Side glass DR. No- LA/BPV/SML/GLASS/003/A qty-4/veh, ,Rear glass DR. NO- LA/BPV/SML/GLASS/004/A QTY-2/Veh & as per specification No.VFJ/R&D/LA/SP/BPV/GLASS/SML (4X4) dtd-14/06/2019 (Amendment no. 01 dated 20-01-2020)
Specification
SPECIFICATION NO. VFJ/R&D/LA/SP/BPV/GLASS/SML(4X4), DATED:14/06/2019 (Amendment no. 01 dated 20-01-2020)
Drawing no.
(i) LA/BPV/SML/GLASS/001/A (ii) LA/BPV/SML/GLASS/002/A (iii) LA/BPV/SML/GLASS/003/A (iv) LA/BPV/SML/GLASS/004/A
Testing / Inspection Facility
90
31
Set
FABRICATION OF COAT DRILL WHITE SUIT DANGER BUILDING
Description
FABRICATION OF COAT DRILL WHITE SUIT DANGER BUILDING
SWO PART II No. 20129/70129.
Specification
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
SWO PART II No. 20129/70129.
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Manufacturing Technology
REFER ANNEXED SPECIFICATION.
Testing / Inspection Facility
REFER ANNEXED SPECIFICATION.
21
698
Number
FABRICATION OF COAT DRILL WHITE SUIT DANGER BUILDING FOR AF KHADKI
Description
FABRICATION OF COAT DRILL WHITE (SUIT DANGER BUILDING FOR A.F. KHADKI)
SWO PART II No. 20209/70209.
Specification
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
SWO PART II No. 20209/70209.
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Testing / Inspection Facility
21
2918
Number
Fabrication of Dust Coat DB White
Description
Fabrication of Dust Coat DB White
Specification
FABRICATION OF DUST COAT DANGER BUILDING WHITE.
SWO PART II No. 20210/70210.
SPECIFICATION:
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE
PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Testing / Inspection Facility
21
400
Number
6245
O128-19
Ordnance Factory Dehradun
The General Manager,
6246
ORDFYS/OCFAV/19-20/PV/03/076ADV1920 Date : 23.01.2020
Ordnance Clothing Factory Avadi
The General Manager,
6247
MPF/OTE/19TE211209
Machine Tool Proto Type Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
7110308047 WELDING OF TRIANGULAR STAY 4071918
Description
WELDING OF TRIANGULAR STAY,4071918.
Specification
WELDING OF TRIANGULAR STAY,4071918.
Testing / Inspection Facility
71
31
Whole job
6248
MPF/PV/MTA/JUNCTION BOXES
Machine Tool Proto Type Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
7119071026 JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM
Description
JUNCTION BOX SS 304,EX ENCLOSURE 200 X 250 X 121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.LCP ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO, SELECTOR SWITCH 0-I,2POSITION WITH 1NO+1NC,COLOUR BLACK BARTEC 07-3323-4400+05-0003-0009-1NO,SCRERWLESS TERMINALS ST 2.5 COLOUR GRAY PHOENIX 3031212-25 NOS.END PLATE PHOENIX 3030417-1NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28 NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3 NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Specification
JUNCTION BOX SS 304,EX ENCLOSURE 200 X 250 X 121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.LCP ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO, SELECTOR SWITCH 0-I,2POSITION WITH 1NO+1NC,COLOUR BLACK BARTEC 07-3323-4400+05-0003-0009-1NO,SCRERWLESS TERMINALS ST 2.5 COLOUR GRAY PHOENIX 3031212-25 NOS.END PLATE PHOENIX 3030417-1NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28 NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3 NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Testing / Inspection Facility
71
As per Requirement
Number
7119071027 JUNCTION BOX SS304 EX ENCLOSURE 330X300X121MM
Description
JUNCTION BOX SS304, EX ENCLOSURE 330X300X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40 DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.75 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,EX LABEL LAMINATED PAPER 1 NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-75 NOS. END PLATE PHOENIX 3030417-4 NOS,END CLAMP PHOENIX 3022218-4 NOS,MARKERS PHOENIX 1050017-79NOS SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-4NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Specification
JUNCTION BOX SS304, EX ENCLOSURE 330X300X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40 DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.75 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,EX LABEL LAMINATED PAPER 1 NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-75 NOS. END PLATE PHOENIX 3030417-4 NOS,END CLAMP PHOENIX 3022218-4 NOS,MARKERS PHOENIX 1050017-79NOS SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-4NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Testing / Inspection Facility
71
As per Requirement
Number
7119071028 JUNCTION BOX SS304 EX ENCLOSURE 200 X 250 X 121MM
Description
JUNCTION BOX SS304,EX ENCLOSURE 200X250X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB II C,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO. 25 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS,DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-25 NOS,END PLATE PHOENIX 3030417-2NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Specification
JUNCTION BOX SS304,EX ENCLOSURE 200X250X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB II C,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO. 25 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS,DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-25 NOS,END PLATE PHOENIX 3030417-2NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE
Testing / Inspection Facility
71
As per Requirement
Number
6249
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TOOL CLEANING GAS HOLE ASSY GM 5 56MM 1A1 TO DS CAT NO 4933 000796 DC I NO 26493 SA DT 22 02 10
Description
TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10
Specification
TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10
Drawing no.
DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10
Testing / Inspection Facility
As per attached document of manufacturing & testing.
70
1000
Number
6250
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PIN STRAIGHT HEADLESS GAS BLOCK
Description
PIN STRAIGHT HEADLESS GAS BLOCK TO DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION)
Specification
PIN STRAIGHT HEADLESS GAS BLOCK TO DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION)
Drawing no.
DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION
Testing / Inspection Facility
70
3000
Number
6251
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Pin grooved Headed for Hinge cover for Carbine 5 56
Description
PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16
Specification
PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16
Drawing no.
DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188
Testing / Inspection Facility
70
5000
Number
6252
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56
Description
PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016
Specification
PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016
Drawing no.
DRG NO-ARDE/SK-3146/33 DS CAT NO. 5315-030876
Testing / Inspection Facility
70
1500
Number
6253
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SPRING HELICAL TORSION FOR HAMMER
Description
SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN.TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16
Specification
SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN.TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16
Drawing no.
DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16
Testing / Inspection Facility
70
5000
Number
6254
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
WALLET EMPTY DS CAT NO 3770 060959 FOR 556 MM LMG RIFLE
Description
WALLET EMPTY (FOR 5.56MM RIFLE/LMG) TO DRG. NO. CQA(SA)SK468 , DS CAT NO. 3770-060959, SHT.1 CONSISTING OF DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(TWO SHEETS DC(I) NO. 26528-SA, DT. 26-07-10
Specification
WALLET EMPTY (FOR 5.56MM RIFLE/LMG) TO DRG. NO. CQA(SA)SK468 , DS CAT NO. 3770-060959, SHT.1 CONSISTING OF DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(TWO SHEETS DC(I) NO. 26528-SA, DT. 26-07-10
Drawing no.
DRG. NO. CQA(SA)SK468 , DS CAT NO. 3770-060959, SHT.1 CONSISTING OF DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(TWO SHEETS DC(I) NO. 26528-SA, DT. 26-07-10
Testing / Inspection Facility
71
1500
Number
6255
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TOOL REMOVING RUPTURED CARTRIDGE CASE
Description
TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10
Specification
TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10
Drawing no.
DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10
Testing / Inspection Facility
70
1000
Number
6256
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TOOL CLEANING GAS BLOCK FOR LMG 5 56 mm
Description
TOOL CLEANING GAS BLOCK TO DRG.NO.ARDE/TA/94/28 IN FINISHED CONDITION.DS CAT NO.4933-000406.DC(1)NO.26937-SA DT-9.09.16
Specification
TOOL CLEANING GAS BLOCK TO DRG.NO.ARDE/TA/94/28 IN FINISHED CONDITION.DS CAT NO.4933-000406.DC(1)NO.26937-SA DT-9.09.16
Drawing no.
DRG.NO.ARDE/TA/94/28 IN FINISHED CONDITION.DS CAT NO.4933-000406.DC(1)NO.26937-SA DT-9.09.16
Testing / Inspection Facility
70
1000
Number
6257
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TOOL ADJUSTING SIGHT ASSY
Description
TOOL ADJUSTING SIGHT TO DRG NO.ARDE /TA/94/26IN FINISHED CONDITION.DS CAT NO-4933-000404 DC(1)NO-26467-SA DTD 23.10.09
Specification
TOOL ADJUSTING SIGHT TO DRG NO.ARDE /TA/94/26IN FINISHED CONDITION.DS CAT NO-4933-000404 DC(1)NO-26467-SA DTD 23.10.09
Drawing no.
DRG NO.ARDE /TA/94/26IN FINISHED CONDITION.DS CAT NO-4933-000404 DC(1)NO-26467-SA DTD 23.10.09
Testing / Inspection Facility
70
500
Number
6258
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SPRING HELICAL COMPRESSION EXTRACTOR INNER
Description
SPRING HELICAL COMPRESSION EXTRACTOR (INNER)TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008
Specification
SPRING HELICAL COMPRESSION EXTRACTOR (INNER)TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008
Drawing no.
DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008
Testing / Inspection Facility
70
5000
Number
6259
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SLING ASSEMBLY OF BLACK COLOUR
Description
SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750
Specification
SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750
Drawing no.
DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750
Testing / Inspection Facility
72
2000
Number
6260
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
ROD CLEANING SMALL ARMS
Description
ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
Specification
ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
Drawing no.
DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
Testing / Inspection Facility
70
2000
Number
6261
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PULL THROUGH 5 point 56 MM 1A NYLON TO DS CAT NO 1005 557944 DC I NO 26532 SA DT 30 07 10
Description
PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Specification
PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Drawing no.
S CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
71
2000
Number
6262
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PIN LOCKING PIN FIRING IN FINISHED CONDITION DS CAT NO 5315 010101
Description
PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101.
Specification
PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101.
Drawing no.
DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101
Testing / Inspection Facility
70
1000
Number
6263
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER
Description
OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I) 26532SA DT.30.7.10
Specification
OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10
Drawing no.
DS CAT NO.4930-000506
Testing / Inspection Facility
71
1000
Number
6264
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
OIL BOTTLE
Description
BOTTLE OIL MK-5,DS CAT NO.4930-000797,1005-000324, 1005-000326;1005-000327,5310-002656.DC(I)NO.26423-SA DT16.06.08.
Specification
BOTTLE OIL MK-5,DS CAT NO.4930-000797,1005-000324, 1005-000326;1005-000327,5310-002656.DC(I)NO.26423-SA DT16.06.08.
Drawing no.
CAT NO.4930-000797,1005-000324, 1005-000326;1005-000327,5310-002656.DC(I)NO.26423-SA DT16.06.08.
Testing / Inspection Facility
71
500
Number
6265
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
HOOK TO DS CAT NO 5340 015108
Description
HOOK TO DRG. NO. ARDE/TA/94/27DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16
Specification
HOOK TO DRG. NO. ARDE/TA/94/27 DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16
Drawing no.
DS CAT NO 5340-015108
Testing / Inspection Facility
70
500
Number
6266
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
HAMMER PEIN BALL
Description
ENGINEERS BALL PEIN HAMMER 200 GRAMS TO I.S.:841-1983
Specification
ENGINEERS BALL PEIN HAMMER 200 GRAMS TO I.S.:841-1983
Testing / Inspection Facility
71
500
Number
6267
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
6268
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
ENGINEERS SCREW DRIVER
Description
ENGINEERS SCREW DRIVER 1.6 X 6.5 X 150 IS:844 PT-II,MAKE-TAPARIA/JHALLNI ONLY
Specification
ENGINEERS SCREW DRIVER 1.6 X 6.5 X 150 IS:844 PT-II,MAKE-TAPARIA/JHALLNI ONLY
Testing / Inspection Facility
71
1000
Number
6269
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
DRIFT PIN IN FINISHED CONDITION
Description
DRIFT PIN IN FINISHED COND. AS PER DRG. NO. ARDE/TA/94/13. DS CAT NO- 5120-007750 DC(I)26925-SA,DTD.01.09.16
Specification
DRIFT PIN IN FINISHED COND. AS PER DRG. NO. ARDE/TA/94/13. DS CAT NO- 5120-007750 DC(I)26925-SA,DTD.01.09.16
Drawing no.
ARDE/TA/94/13. DS CAT NO- 5120-007750 DC(I)26925-SA,DTD.01.09.16
Testing / Inspection Facility
70
2000
Number
6270
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Drift Armourer Removing Dowel Sleeve in Finished Cond To DS CAT No 5120 007812
Description
DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16.
Specification
DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16.
Drawing no.
NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16.
Testing / Inspection Facility
70
2000
Number
6271
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
COVER GUN MUZZLE
Description
COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751
Specification
COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751
Drawing no.
DS CAT NO.1005 - 560751
Testing / Inspection Facility
70
2000
Number
6272
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
COMBINATION PLIER
Description
COMBINATION PLIER TO I.S.3650:1981 TO SIZE-200MM. MAKE-TAPARIA/JHALANI ONLY
Specification
COMBINATION PLIER TO I.S.3650:1981 TO SIZE-200MM. MAKE-TAPARIA/JHALANI ONLY
Testing / Inspection Facility
71
1000
Number
6273
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Brush Cleaning Chamber
Description
Brush Cleaning Chamber, ARDE/TA/94/3 DS CAT No. 1005-007745
Specification
Brush Cleaning Chamber, ARDE/TA/94/3 DS CAT No. 1005-007745
Drawing no.
ARDE/TA/94/3 DS CAT No. 1005-007745
Testing / Inspection Facility
71
1000
Number
6274
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
BRUSH CLEANING BRACKET AND CYLINDER GAS
Description
BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.
Specification
BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.
Drawing no.
DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing.
71
1000
Number
6275
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Firing Attachment Blank ammunition DSCAT No1005 007847
Description
FIRING ATTACHMENT BLANK AMMUNITION IN FINISHED CONDITION TO DS CAT NO-1005-007847.DC(I) 26521- SA DT. 12.07.2010
Specification
FIRING ATTACHMENT BLANK AMMUNITION IN FINISHED CONDITION TO DS CAT NO-1005-007847.DC(I) 26521- SA DT. 12.07.2010
Drawing no.
DS CAT NO-1005-007847.DC(I) 26521- SA DT. 12.07.2010
Testing / Inspection Facility
70
1000
Number
6276
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
BAG TOOL SATCHEL
Description
BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010.
Specification
BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010.
Drawing no.
DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010
Testing / Inspection Facility
71
1000
Number
6277
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
ADAPTOR FOR CLN BORE
Description
ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010
Specification
ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010
Drawing no.
DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010
Testing / Inspection Facility
70
1000
Number
6278
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
MAGAZINE 30 RDS ASSY FOR LMG 5 56 MM
Description
MAGAZINE ASSEMBLY (30 ROUNDS TO DRG NO. ARDE-SK-2689/285, DS CAT NO. 1005-007961DC(I) NO. 26429-SA ,DT.19-08-08
Specification
MAGAZINE ASSEMBLY (30 ROUNDS TO DRG NO. ARDE-SK-2689/285, DS CAT NO. 1005-007961DC(I) NO. 26429-SA ,DT.19-08-08
Drawing no.
DRG NO. ARDE-SK-2689/285, DS CAT NO. 1005-007961DC(I) NO. 26429-SA ,DT.19-08-08
Testing / Inspection Facility
72
1000
Number
6279
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
USER HAND BOOK
Description
USER HAND BOOK( MANUAL) OF LMG 5.56MM
Specification
USER HAND BOOK( MANUAL) OF LMG 5.56MM
Testing / Inspection Facility
25
1000
Number
6280
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SPANNER SE 18MM
Description
SPANNER SINGLE ENDED. SIZE-18 MMSE 18 IS: 5167 MAKE-EVEREST/TAPARIA/JHALANI.
Specification
SPANNER SINGLE ENDED. SIZE-18 MMSE 18 IS: 5167 MAKE-EVEREST/TAPARIA/JHALANI.
Testing / Inspection Facility
71
1000
Number
6281
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
MONOPOD ASSY FOR LMG
Description
MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN FINISHED CONDITION (BLACK COLOUR)
Specification
MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN FINISHED CONDITION (BLACK COLOUR)
Drawing no.
DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN FINISHED CONDITION (BLACK COLOUR)
Testing / Inspection Facility
72
1000
Number
6282
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
IDENTIFICATION LIST
Description
IDENTIFICATION LIST (PARTS) LIST OF LMG5.56MM
Specification
IDENTIFICATION LIST (PARTS) LIST OF LMG5.56MM
Testing / Inspection Facility
25
1000
Number
6283
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
WIRE ROD 10MM
Description
STEEL ROUND DIA 10MM SPEC. IS:7283-1974 GD C40
Specification
STEEL ROUND DIA 10MM SPEC. IS:7283-1974 GD C40
Testing / Inspection Facility
14
500
Kilogram
6284
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
TRIGGER saf matl
Description
TRIGGER IN FINISH CONDITION AS PER DRG.NO.CQA(I)393/26 WITH-OUT ANODIZE PROTECTIVE FINISH FOR FIRING DEVICE, MATERIAL TO BE SUPPLIED BY SAF THROUGH LF NO.0142032535 AGAINST BANK GUARANTEE CAT-/PT NO.1005-007703.
Specification
TRIGGER IN FINISH CONDITION AS PER DRG.NO.CQA(I)393/26 WITH-OUT ANODIZE PROTECTIVE FINISH FOR FIRING DEVICE, MATERIAL TO BE SUPPLIED BY SAF THROUGH LF NO.0142032535 AGAINST BANK GUARANTEE CAT-/PT NO.1005-007703.
Drawing no.
DRG.NO.CQA(I)393/26 WITH-OUT ANODIZE PROTECTIVE FINISH FOR FIRING DEVICE,
Testing / Inspection Facility
70
35000
Number
6285
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SS WIRE ROD DIA 10MM
Description
SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
Specification
SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
Given drawing.
2- Dimensional Inspection ,for all dimensions given
In drawing & other parameter which are mentioned
In relevant drawing.
01
1000
Kilogram
6286
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Nut Castellated Hexagon
Description
NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE
Specification
NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE
Drawing no.
DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
60000
Number
6287
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Pin Straight Headed 393 27
Description
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/27
Specification
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/27
Drawing no.
DRG.NO. CQA(I) 393/27
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
Given drawing.
2- Dimensional Inspection ,for all dimensions given
In drawing & other parameter which are mentioned
In relevant drawing
70
10000
Number
6288
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PIN STRAIGHT HEADED CQA I 393 11
Description
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/11CAT/PT.NO.5315-008698
Specification
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/11CAT/PT.NO.5315-008698
Drawing no.
DRG.NO. CQA(I) 393/11CAT/PT.NO.5315-008698
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
50000
Number
6289
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Latch Special in finished condition
Description
Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
Specification
Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
Testing / Inspection Facility
70
15000
Number
6290
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Plate Armature in finished condition 393 36
Description
PLATE ARMATURE IN FINISH CONDITION DRG.NO. CQA(I) - 393/36 TO CAT /PT NO. 6115-001170 .
Specification
PLATE ARMATURE IN FINISH CONDITION DRG.NO. CQA(I) - 393/36 TO CAT /PT NO. 6115-001170 .
Drawing no.
DRG.NO. CQA(I) - 393/36 TO CAT /PT NO. 6115-001170
Testing / Inspection Facility
70
15000
Number
6291
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Plate Armature in finished condition
Description
Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
Specification
Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
Drawing no.
Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
Testing / Inspection Facility
70
15000
Number
6292
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Testing Device Circuit Continuity 1 BAS
Description
Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429
Item Code-7012907618)
Specification
Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429
Item Code-7012907618)
Manufacturing Technology
Electrical Testing Equipment( Molding Machingh Electrical tech & Assy.,
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
1000
Number
6293
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Rivet MS Snap Head
Description
RIVET M.S. SNAP HEAD 1.59 DIA X 4.19 L TO BSS 641:1951 TABLE ...2 (CADMIUM PLATED) TO BE RIVETED ON DEVICE FIRING 1B
Specification
RIVET M.S. SNAP HEAD 1.59 DIA X 4.19 L TO BSS 641:1951 TABLE ...2 (CADMIUM PLATED) TO BE RIVETED ON DEVICE FIRING 1B
Manufacturing Technology
Machining and Cadmium Plating
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
2-Dimensional Inspection, for all dimensions given
as mentioned description/std.
70
60000
Number
6294
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PIN KEEP SPLIT FOR FIRING DEVICE
Description
PIN, KEEP SPLIT 1.19 X 12.7 (CAT. NO. GI/GA 1662).
Specification
PIN, KEEP SPLIT 1.19 X 12.7 (CAT. NO. GI/GA 1662).
Testing / Inspection Facility
70
90000
Number
6295
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
WASHER LOCK STEEL SHAKE PROOF ZINC COATED FOR FIRING DEVICE
Description
WASHER LOCK STEEL, SHAKE PROOF, ZINC COATED, INTERNAL TYPE 12,3.18 (CAT. NO.GI/GA 13715).
Specification
WASHER LOCK STEEL, SHAKE PROOF, ZINC COATED, INTERNAL TYPE 12,3.18 (CAT. NO.GI/GA 13715).
Drawing no.
CAT. NO.GI/GA 13715
Testing / Inspection Facility
70
60000
Number
6296
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
PLUG FOR FIRING DEVICE 1B FOR MINE
Description
PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE
Specification
PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE
Drawing no.
DRG.NO. CQA(I)393/4
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.given drawing 2-Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
30000
Number
6297
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Screw Externally Releived Body
Description
SCREW EXTERNALLY RELEIVED BODY DRG.NO. CQA(I)-393/2 FOR DEVICE FIRING 1B FOR MINE CAT./PT.NO.5305-016658
Specification
SCREW EXTERNALLY RELEIVED BODY DRG.NO. CQA(I)-393/2 FOR DEVICE FIRING 1B FOR MINE CAT./PT.NO.5305-016658
Drawing no.
DRG.NO. CQA(I)-393/2 FOR DEVICE FIRING 1B FOR MINE CAT./PT.NO.5305-016658
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
60000
Number
6298
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB
Description
SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
Specification
SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
Drawing no.
DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
29000
Number
6299
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Square Drawn Rod of 1 4 6 35mm
Description
SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H
Specification
SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H
Testing / Inspection Facility
14
125
Kilogram
6300
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Pin Straight Headed 393 19
Description
PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
Specification
PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
Drawing no.
DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
Given drawing.
2- Dimensional Inspection ,for all dimensions given
In drawing & other parameter which are mentioned
In relevant drawing.
70
29000
Number
6301
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB
Description
BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
Specification
BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
Drawing no.
DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217
Testing / Inspection Facility
Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other
Parameter which are mentioned in relevant drawing.
70
29000
Number
6302
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Grip Handle Left and Right For FIRING DEVICE
Description
GRIP HANDLE(LEFT AND RIGHT) AS PER DRG.NO. CQA(I)-393/17 (LEFT) & DRG.NO. CQA(I)-393/1(RIGHT)
Specification
GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
Drawing no.
DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
Testing / Inspection Facility
Chemical and Mechanaical properities as per std.given drawing Dimesnsional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
70
29000
Set
6303
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Grip Handle Right
Description
GRIP HANDLE (RIGHT) AS PER DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126
Specification
GRIP HANDLE (RIGHT) AS PER DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126
Drawing no.
DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126
Testing / Inspection Facility
70
29000
Number
6304
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE
Description
SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659
Specification
SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659
Drawing no.
CAT./PT.NO.5305-016659
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
70
29000
Number
6305
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Steel Round Dia 28mm
Description
STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20
Specification
STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20
Testing / Inspection Facility
1. Chemical & Mechanical properties as per std. given drawing.
2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
14
2500
Kilogram
6306
SAF/MMD/AVR/20-21/LMG/F.D.
Small Arms Factory
The General Manager,
Name
Code
Quantity
Approx Value
Select
Pin Straight Headed CQA I 393 14
Description
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699
Specification
PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699
Drawing no.
DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699
Testing / Inspection Facility
1-Chemical & Mechanical properties as per std.
Given drawing.
2- Dimensional Inspection ,for all dimensions given
In drawing & other parameter which are mentioned
In relevant drawing
70
29000
Number
