SPECN NO:IND/TC/0296(b)EXCEPT FORLENGTH/KG (min)(m)-12800, COUNT OF YARN 250 DTEX X3. BREAKING LOAD (MIN)-(50 CM. BETWEEN GRIPS)-23000 MN.FINAL TWIST IS Z PACKING & MARKING : AS PER SCHEDULE NO.CQAT&C/PMS/36(a)
Manufacturing Facilities Involved:
• Injection Moulding
• Die Making
In case the tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The Injection Moulding Facility is mandatory.
Inspection Facilities Involved:
• Standard Measuring Instruments & Gauges
• Material Testing Facility with NABL Accreditation
• Load Testing Facility as per Drawing
Tenderer shall satisfy / declare the required inspection facilities are available either in-house or outsourced.
SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the controller, CQAT&C, KANPUR
(iii)Packing and marking Sampling Plan & Criteria of conformity As per relevant clause of specn.
(iv)Pre inspection, warranty and Advance sample Clause as per specification.
GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91, D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171. LATEST D.C.No. TO BE FOLLOWED.
1005-007504,
Specification
AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
Drawing no.
D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through Strapping Device. Specification No. JSS:8135-10:2004. as per relevant clause of specification.
Specification
Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through Strapping Device. Specification No. JSS:8135-10:2004. as per relevant clause of specification.
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Plastic Button Reversible 19 mm in Matching printed pattern ( Thermosetting)
Specification
Plastic Button Reversible 19 mm in Matching printed pattern ( Thermosetting)
Specification No- IS:1461 1984(second Revision) reaffirmed 2003, Except that shape & design as per annexure "A" attached and feel & finish as per sample held in the custody of OCFS. As per relevant clause of supplementary schedule no. CQA(GS)/SS/346(b)
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH
Specification
SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2
Read-200 g/cm2
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
OLED WITH DRIVER BOARD,RESOLUTION GREATERTHAN OR EQUAL TO 640 X 480,COLOURED/(B/W), PIXEL SIZELESS THAN OR EQUAL TO 15 MICRON,OPERATINGTEMPERATURE RANGE GREATER THAN OR EQUAL TO(-20 DEGREE CELSIUS TO +50 DEGREE CELSIUS),ANALOG INPUT,POWER CONSUMPTION
Specification
OLED WITH DRIVER BOARD,RESOLUTION GREATERTHAN OR EQUAL TO 640 X 480,COLOURED/(B/W), PIXEL SIZELESS THAN OR EQUAL TO 15 MICRON,OPERATINGTEMPERATURE RANGE GREATER THAN OR EQUAL TO(-20 DEGREE CELSIUS TO +50 DEGREE CELSIUS),ANALOG INPUT,POWER CONSUMPTION