4641
110190301
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
FABRIC CHLOROPRENE PROOFED NY KK 200
Description
POLYCHLOROPRENE COATED NYLON FABRIC SINGLE TEXTURE KK-200 130 CMS. WIDE.
SPECIFICATION NO. :CQAE/9320/1372/f
Specification
SPECN.NO.: CQAE/9320/1372/f
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221206
5440.50
Metre
4642
2019000129
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
PLASTIC SLIDE FASTNERS LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 22CM
Description
PLASTIC SLIDE FASTNERS LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 22CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013) PART 01 TO 03
Specification
PLASTIC SLIDE FASTNERS LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 22CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013) PART 01 TO 03
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
532
Number
PLASTIC SLIDE FASTNERS LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 20CM
Description
PLASTIC SLIDE FASTNERS LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 20CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013) PART 01 TO 03
Specification
PLASTIC SLIDE FASTNERS LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 20CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013) PART 01 TO 03
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
157275
Number
PLASTIC SLIDE FASTNER LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 18CM
Description
PLASTIC SLIDE FASTNER LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 18CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013 PART 01 TO 03)
Specification
PLASTIC SLIDE FASTNER LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 18CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013 PART 01 TO 03)
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
356982
Number
Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm
Description
Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges.
Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.
Specification
Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges.
Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
44600
Metre
SYNTHETIC PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY OPEN END WHITE 80 CM
Description
SYNTHETIC PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY OPEN END WHITE 80 CM
SPECIFICATION:- IS:14181 (PT 1 TO 3) 2002 AMDT NO. - 2, RA 2013
Specification
SYNTHETIC PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY OPEN END WHITE 80 CM
SPECIFICATION:- IS:14181 (PT 1 TO 3) 2002 AMDT NO. - 2, RA 2013
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
2161
Number
SYNTHETIC PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY OPEN END WHITE 58 CM
Description
SYNTHETIC PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY OPEN END WHITE 58 CM
SPECIFICATION NO. - IS:14181 (PT. 1 TO 3) 2002 AMDT NO. - 2, RA 2013
Specification
SYNTHETIC PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY OPEN END WHITE 58 CM
SPECIFICATION NO. - IS:14181 (PT. 1 TO 3) 2002 AMDT NO. - 2, RA 2013
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
3262
Number
FABRIC NYLON 300 GSM RIPSTOP PU COATED F R 152 CMS WIDE
Description
FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE
SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a)
Specification
FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE
SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a)
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
13789
Metre
Polyester Round Mesh Interlining Fabric
Description
Polyester Round Mesh Interlining Fabric OG width 102cm (Min.)
Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).
Specification
Polyester Round Mesh Interlining Fabric OG width 102cm (Min.)
Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
14189
Metre
FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN MODIFIED
Description
FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN (MODIFIED)
SPECIFICATION NO. IND/TC/4634(1) AND APPROVED SAMPLE
Specification
FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN (MODIFIED)
SPECIFICATION NO. IND/TC/4634(1) AND APPROVED SAMPLE
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
12500
Whole job
4643
O113-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
TIMBER CHIR PLANK AS PER IS 5247 1982
Description
TIMBER CHIR PLANK SIZE- 19 MM X 150 MM X 1.8 METER OR ABOVE AS PER IS-5247 (PART-2) 1982
Specification
TIMBER CHIR PLANK SIZE- 19 MM X 150 MM X 1.8 METER OR ABOVE AS PER IS-5247 (PART-2) 1982
Testing / Inspection Facility
22
50000 cdm
Cu.decimetre
4644
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
BOX EJECTOR PROJECTILE 2A TO PART N 8115 000185
Physical Verification needed
Description
BOX EJECTOR PROJECTILE 2A TO PART N 8115 000185
Specification
BOX EJECTOR PROJECTILE 2A TO PART N 8115 000185
Manufacturing Technology
BOX EJECTOR PROJECTILE 2A TO PART N 8115 000185
Testing / Inspection Facility
BOX EJECTOR PROJECTILE 2A TO PART N 8115 000185
90
324
Number
PHOSPHOR BRONZ EXTRUDED AND DRAWN 70 MM
Description
PHOSPHORBRONZ EXTRUDED AND DRAWN.
70.MM (2-3/4") DIA ROD TO SPECN.
IS.7811/1985
Specification
PHOSPHORBRONZ EXTRUDED AND DRAWN.
70.MM (2-3/4") DIA ROD TO SPECN.
IS.7811/1985
Testing / Inspection Facility
07
7739
Kilogram
DISC WHEEL TO DRG NO 1015 000810
Physical Verification needed
Description
DISC WHEEL TO DRG NO 1015 000810
Specification
DISC WHEEL TO DRG NO 1015 000810
Manufacturing Technology
DISC WHEEL TO DRG NO 1015 000810
Testing / Inspection Facility
DISC WHEEL TO DRG NO 1015 000810
90
852
Number
SHEAVE OUTER TO PART NO 4018739
Description
SHAVE OUTER TO PART NO 4018739
Specification
SHAVE OUTER TO PART NO 4018739
Manufacturing Technology
SHEAVE OUTER TO PART NO 4018739
Testing / Inspection Facility
SHEAVE OUTER TO PART NO 4018739
90
25
Number
4645
HVF/TE0102190209/2019-20/TA/CBOI/SD-OTE dt 03/02/2020
Heavy Vehicle Factory
The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
SHAFT TORSION FORGING 3996411023
Physical Verification needed
Description
SHAFT TORSION FORGING - 172.51.016/F
Testing / Inspection Facility
39
293
Number
TORSION BAR FORGING 3991051007
Physical Verification needed
Description
TORSION BAR FORGING (172.51.016-1/F)
Drawing no.
172.51.016-1/F
Testing / Inspection Facility
39
256
Number
SEWING THREAD SPUN POLYESTER OG
Description
SEWING THREAD SPUN POLYESTER OG
Specification
SPECN NO:IND/TC/0296(b)EXCEPT FORLENGTH/KG (min)(m)-12800, COUNT OF YARN 250 DTEX X3. BREAKING LOAD (MIN)-(50 CM. BETWEEN GRIPS)-23000 MN.FINAL TWIST IS Z PACKING & MARKING : AS PER SCHEDULE NO.CQAT&C/PMS/36(a)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101726605
46556
Kilometer(km)
4646
EOI/PROVISIONAL/REGULARIZATION
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
Name
Code
Quantity
Approx Value
Select
CHAPE AND LINK ASSEMBLY COMPLETE
Description
CHAPE & LINK ASSEMBLY COMPLETE
Specification
Specn. No. IND/GS/1726 ( C)
Manufacturing Technology
As per specification and drawing attached
Testing / Inspection Facility
Visual mechanical chemical As per specification and drawing attached
21
As per requirement
Set
WEBBING NYLON 44 MM 2950 KG STEEL GREY
Description
WEBBING NYLON 44 MM 2950 KG STEEL GREY
Specification
SPECN. IS:4727-1968 Type -1 Except that :-
1) 180 picks/dm +/- 5% (2 picks/shed)
2) No. of folds in weft yarn-1
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101877120
601
Metre
TAPE NYLON 66 26 MM BS 850 KGF UD RESIN TREATED
Description
TAPE NYLON 66, 26 MM BS 850 KGF U/D, RESIN TREATED 1.5 TO 2.5%
Specification
Updated Specification No. ADRDE/Specn/2000/54(e) received vide ADRDE, Agra letter No. ADRDE/QMS/TG(TE)/24 dtd : 30/07/2021.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101787010
3025
Metre
FABRICATION OF RTU 1000 Lbs
Description
FABRICATION OF RTU-1000 Lbs
Specification
AS PER DRG. NO. ADRDE/1041 (f)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025049
800
Number
4647
MPF/OTE/19TE211238
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
7119070882 MUZZLE TUBE COVER SR LAUNCHER ASSEMBLY
Physical Verification needed
Description
Muzzle Tube Cover-SR, Launcher Assembly SR, Launcher Kavach Mod-II, to Drg. No. 1109-1015-13
Specification
Muzzle Tube Cover-SR, Launcher Assembly SR, Launcher Kavach Mod-II, to Drg. No. 1109-1015-13
Manufacturing Technology
Manufacturing Facilities Involved:
• Injection Moulding
• Die Making
In case the tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The Injection Moulding Facility is mandatory.
Testing / Inspection Facility
Inspection Facilities Involved:
• Standard Measuring Instruments & Gauges
• Material Testing Facility with NABL Accreditation
• Load Testing Facility as per Drawing
Tenderer shall satisfy / declare the required inspection facilities are available either in-house or outsourced.
71
8548
Number
SHIELD TO 184 04 019 TO 6201004089
Physical Verification needed
Description
SHIELD TO 184.04.019 TO 6201004089
Specification
SHIELD TO 184.04.019 TO 6201004089
Drawing no.
SHIELD TO 184.04.019
Manufacturing Technology
ENCLOSED ENCLOSED ENCLOSED ENCLOSED ENCLOSED
Testing / Inspection Facility
ENCLOSED ENCLOSED ENCLOSED ENCLOSED ENCLOSED
02
272
Number
4648
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR2 FROM OFT MATERIAL
Description
MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR 2 FROM OFT MATERIAL
Specification
MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR 2 FROM OFT MATERIAL
Drawing no.
TEND 2226 STAR 2
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
400
Number
4649
107/028/PV(A)/EOI/19-20
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
Name
Code
Quantity
Approx Value
Select
MAGAZINE SUB ASSY CTM 0175
Description
MAGAZINE SUB ASSY IN F/C AS PER DRG DRG NO CTM-0175
Specification
MAGAZINE SUB ASSY IN F/C AS PER DRG DRG NO CTM-0175
Testing / Inspection Facility
70
8000
Number
HAMMER CTM 0174
Description
HAMMER IN F/C AS PER DRG. NO. CTM-0174
Specification
HAMMER IN F/C AS PER DRG. NO. CTM-0174
Testing / Inspection Facility
70
8000
Number
RECEIVER CTM 0178 1 TO CTM 0178 2
Description
RECEIVER IN F/C AS PER DRG NO. CTM 0178/1 TO 0178/2
Specification
RECEIVER IN F/C AS PER DRG NO. CTM 0178/1 TO 0178/2
Drawing no.
CTM-0178/1 TO CTM-0178/2
Testing / Inspection Facility
70
8000
Number
SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A
Physical Verification needed
Description
SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE FOLLOWED. (LF No. 7011655335)
Specification
SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE FOLLOWED. (LF No. 7011655335)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
9375
Number
SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A
Physical Verification needed
Description
SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE FOLLOWED. (LF No. 7011655335)
Specification
SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE FOLLOWED. (LF No. 7011655335)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
9375
Number
BRACKET TO DRAWING NO 1147762
Physical Verification needed
Description
BRACKET TO DRAWING NO.1147762
Specification
BRACKET TO DRAWING NO.1147762
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
18
Number
BRACKET TO DRAWING NO 1147761
Physical Verification needed
Description
BRACKET TO DRAWING NO.1147761
Specification
BRACKET TO DRAWING NO.1147761
Manufacturing Technology
AS PER TENDER DOCUMENT ANNEXURE L
Testing / Inspection Facility
AS PER TENDER DOCUMENT ANNEXURE L
90
18
Number
BRACKET TO DRAWING NO 1147152
Physical Verification needed
Description
BRACKET TO DRAWING NO.1147152
Specification
BRACKET TO DRAWING NO.1147152
Manufacturing Technology
as per tender document annexure l
Testing / Inspection Facility
as per tender document annexure l
90
18
Number
BRACKET TO DRG NO 4076048
Physical Verification needed
Description
BRACKET TO DRG.NO.4076048
Specification
BRACKET TO DRG.NO.4076048.
Testing / Inspection Facility
90
161
Number
Micro Switch Part No DC 2C X G09 Make ZF Electronics
Physical Verification needed
Description
Micro Switch Part no. DC-2C x G09, 10 .1A/Part No. DC-2C-E5RC ENEC 05-10, 1A, 125 -250 VAC, 1/4HP, 125VAC, Make: ZF Electronics, Qty: 688 Nos.
Specification
Micro Switch Part no. DC-2C x G09, 10 .1A/Part No. DC-2C-E5RC ENEC 05-10, 1A, 125 -250 VAC, 1/4HP, 125VAC, Make: ZF Electronics, Qty: 688 Nos.
Manufacturing Technology
Manufacturing Technology: (1) Soldering (2) Moulding
Testing / Inspection Facility
Testing Equipment: (1) Multimeter (2) Insulation Tester
71
688 Nos.
Number
COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
Physical Verification needed
Description
COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
Specification
COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
625
Number
4650
2019DTE121
Ordnance Cable Factory Chandigarh
The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002
Name
Code
Quantity
Approx Value
Select
LOW TEMPERATURE PVC COMPOUND AS PER ENCLOSED SPECIFICATION
Description
LOW TEMPERATURE PVC COMPOUND[NATURAL COLOUR]WITHSTAND UPTO -55DEG.CENT. AS PER ENCLOSED OCFC, SPECIFICATION NO.04 ISSUE NO.01 DATED 16/05/2006 REVISION NO.02 DATED07/09/2017
Manufacturing Technology
As per attachment. As per attachment. As per attachment. As per attachment. As per attachment.
Testing / Inspection Facility
As per attachment. As per attachment. As per attachment. As per attachment. As per attachment.
70
79465
Kilogram
Carbon tape 19 mm
Physical Verification needed
Description
Carbon tape 19 mm
Specification
Carbon tape 19 mm
Drawing no.
As per attachment.
Manufacturing Technology
As per attachment. As per attachment. As per attachment. As per attachment. As per attachment.
Testing / Inspection Facility
As per attachment. As per attachment. As per attachment. As per attachment. As per attachment.
70
2845
Kilometer(km)
STAINLESS STEEL WIRE AS PER SPECIFICATION MSCQ 5
Physical Verification needed
Description
STAINLESS STEEL WIRES 0.381MM DIA AS PER SPECIFICATION MSCQ-5/STAINLESS STEEL
Specification
STAINLESS STEEL WIRES 0.381MM DIA AS PER SPECIFICATION MSCQ-5/STAINLESS STEEL
Drawing no.
As per attachment.
Manufacturing Technology
As per attachment. As per attachment. As per attachment. As per attachment. As per attachment.
Testing / Inspection Facility
As per attachment. As per attachment. As per attachment. As per attachment. As per attachment.
77
11590
Kilogram
CORD NYLON 1785 N B L WHITE
Description
CORD. NYLON 1785 N B.L. WHITE
Specification
SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the controller, CQAT&C, KANPUR
(iii)Packing and marking Sampling Plan & Criteria of conformity As per relevant clause of specn.
(iv)Pre inspection, warranty and Advance sample Clause as per specification.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101116225
10150858
Metre
GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91
Physical Verification needed
Description
GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91, D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171. LATEST D.C.No. TO BE FOLLOWED.
1005-007504,
Specification
AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
Drawing no.
D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
2044
Number
4651
3193000956
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
AUTO SEAR FOR JVPC
Physical Verification needed
Description
AUTO SEAR FOR JVPC 5.56MM THROUGH MIM ROUTE
DRG.NO.0204-03-04-02-14-012-00DA
Specification
AUTO SEAR FOR JVPC 5.56MM THROUGH MIM ROUTE
DRG.NO.0204-03-04-02-14-012-00DA
Drawing no.
0204-03-04-02-14-012-00DA
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
70
603
Number
FABRICATION OF SUPPLY DROP PARACHUTE
Description
FABRICATION OF SUPPLY DROP PARACHUTE
Specification
Drg./Specn. No. IND/TC/2694 with amendment No. 1, 2 & 3.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025031
2000
Number
Corrugated Fiber Board 5 Ply Box of Size 420 mm x 330 mm x 375mm
Description
No.IS:2771 WITH WATER ABSORPTION / COBB TEST
Specification
No.IS:2771 WITH WATER ABSORPTION / COBB TEST
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
33419
Number
Boxes Fibre Board Rigid Corrugated Triple Wall 7 Ply of Size 700mmx450mmx400mm
Description
Boxes Fibre Board Rigid Corrugated Triple Wall 7 Ply of Size 700mmx450mmx400mm CQA(GS)/US/460
Specification
CQA(GS)/US/460
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
52896
Number
DRUM CABLE STEEL 1A AS PER DRAWING AND SPECIFICATION
Physical Verification needed
Description
DRUM CABLE STEEL 1A AS PER DRG. & SPECN. CIL/3240(SHEET NO. 1,2,4,6,7,8) AS PER CIL 3240 (6SHEET) AS PER ISSUE NO.5
Specification
DRUM CABLE STEEL 1A AS PER DRG. & SPECN. CIL/3240(SHEET NO. 1,2,4,6,7,8) AS PER CIL 3240 (6SHEET) AS PER ISSUE NO.5
Drawing no.
As per attachment.
Manufacturing Technology
As per attachment. As per attachment. As per attachment. As per attachment. As per attachment.
Testing / Inspection Facility
As per attachment. As per attachment. As per attachment. As per attachment. As per attachment.
77
560
Number
Trade assistance for Frame of Skid Board MI 8
Description
Trade assistance for Frame of Skid Board (MI-8)
Specification
Specn No. IND/GS/1726 (c)
Manufacturing Technology
As per specification and drawing
Testing / Inspection Facility
visual Mechanical chemical And as per specification
21
As per requirement
Number
Blank of Body Cover Drg No 23055A SKM 902 1
Description
BLANK OF BODY COVER DRG NO 23055A,SKM-902*1,
Specification
BLANK OF BODY COVER DRG NO 23055A,SKM-902 1,
Drawing no.
DRG NO 23055A,SKM-902*1
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
01
185
Number
IC FEED ARM SKM 769 2
Description
I.C FEED ARM TO DRG.NO.SKM-769*2
Specification
I.C FEED ARM TO DRG.NO.SKM-769*2
Drawing no.
DRG.NO.SKM-769*2
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
04
331
Number
MS GALVANIZED SEAL FOR 12 MM WIDE POLYPROPYLENE STRAPPING
Description
MS GALVANIZED SEAL FOR 12 MM WIDE POLYPROPYLENE STRAPPING SPECIFICATION: - BEST TRADE QUALITY
Specification
MS GALVANIZED SEAL FOR 12 MM WIDE POLYPROPYLENE STRAPPING SPECIFICATION: - BEST TRADE QUALITY
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
158382
Number
Polypropylene Strapping zero point five mm Thick and 12 mm wide in white colour
Description
Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through Strapping Device. Specification No. JSS:8135-10:2004. as per relevant clause of specification.
Specification
Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through Strapping Device. Specification No. JSS:8135-10:2004. as per relevant clause of specification.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
288731
Metre
Yarn Wool Polyamide 80 ratio 20 240Tex AF Blue
Description
Yarn Wool Polyamide (80:20) 240 Tex AF Blue
"OCFS/Yarn Wool Polyamide (80:20) 240 Tex/Blanket AF Blue" except that Lot Size as per Appendix 'C'
Specification
Yarn Wool Polyamide (80:20) 240 Tex AF Blue
"OCFS/Yarn Wool Polyamide (80:20) 240 Tex/Blanket AF Blue" except that Lot Size as per Appendix 'C'
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
7498
Kilogram
FABRICATION OF CARRYING BAG BP LCA
Description
FABRICATION OF CARRYING BAG BP LCA
Specification
As per Drg. No. 1.3.01-09 (a)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025047
250
Number
Plastic Button Reversible 19 mm in Matching printed pattern Thermosetting
Description
Plastic Button Reversible 19 mm in Matching printed pattern ( Thermosetting)
Specification
Plastic Button Reversible 19 mm in Matching printed pattern ( Thermosetting)
Specification No- IS:1461 1984(second Revision) reaffirmed 2003, Except that shape & design as per annexure "A" attached and feel & finish as per sample held in the custody of OCFS. As per relevant clause of supplementary schedule no. CQA(GS)/SS/346(b)
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
23368
Hundred
SEWING THREAD 125d TEX BY 3 SPUN POLYESTER OG IN TUBE OF 1000 MTRS
Description
SEWING THREAD 125d TEX / 3 SPUN POLYESTER OG IN TUBE OF 1000 MTRS
Specification
IND/TC/0296(b)
CQA(T&C)/PMS/36(a)
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
200970
Kilometer(km)
BUCKLE ADRDE 1429 01
Description
BUCKLE ADRDE/1429-01
Specification
BUCKLE A.B.C DRG.NO. ADRDE/1429-01
Drawing no.
BUCKLE A.B.C DRG.NO. ADRDE/1429-01
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110029012
3073
Number
NIV FABRIC 410 G OG WPPV DOPE DYED RIP STOP 148 CM PROV
Description
NIV-FABRIC 410 G OG WPPV DOPE DYED RIP STOP 148 CM. PROV
Specification
SPECN.NO.IND/TC/2562
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221257
24590
Metre
ADHESIVE TYPE B
Description
ADHESIVE TYPE -B
Specification
IND/ENG/PROV/1193/d
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
1003260420
553.20
Kilogram
ADHESIVE TYPE A
Description
ADHESIVE TYPE -A
Specification
SPECIFICATION NO: IND/ENG/PROV/1193/d-2004
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
1003260410
2695.60
Kilogram
FABRIC NYLON LT WT 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 AS PER IS SPECN NO IS 5 1994 122 CM WIDTH
Description
FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH
Specification
SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2
Read-200 g/cm2
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221981
5665.62
Metre
FABRICATION OF CARRYING BAG BP SU 30
Description
FABRICATION OF CARRYING BAG BP SU-30
Specification
AS PER DRG. NO. ADRDE/1402-09(c)
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2110025041
500
Number
FABRICATION OF THIMBLE COVER BRAKE PARA LCA
Description
FABRICATION OF THIMBLE COVER BRAKE PARA LCA
Specification
AS PER DRG. NO. 1.3.01-08 (b)
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2110025045
400
Number
FABRICATION OF AUX BRAKE PARA MIG 21
Description
FABRICATION OF AUX BRAKE PARA MIG-21
Specification
AS PER DRG. NO. ADRDE/526-A-2 (e)
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110025042
350
Number
FABRICATION OF AUX PARA FOR BRAKE PARA LCA
Description
FABRICATION OF AUX PARA FOR BRAKE PARA LCA
Specification
AS PER DRG. NO. 1.3.01-03 (b)
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110025044
400
Number
FABRICATION OF DEP BAG BRAKE PARA MIG 29
Description
FABRICATION OF DEP. BAG BRAKE PARA MIG-29
Specification
AS PER DRG. NO. ADRDE/1235-A-2 (b)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025043
209
Number
FABRICATION OF DEP BAG BRAKE PARA LCA
Description
FABRICATION OF DEP. BAG BRAKE PARA LCA
Specification
AS PER DRG. NO. 1.3.01-06 (b)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110025046
400
Number
FABRICATION OF CANOPY ASSY PP MIRAGE
Description
FABRICATION OF CANOPY ASSY. PP MIRAGE.
Specification
AS PER DRG. NO. ADRDE/1204 (n)
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110025050
100
Number
FABRICATION OF PACK COVER MIRAGE
Description
FABRICATION OF PACK COVER MIRAGE
Specification
AS PER DRG. NO. ADRDE/1106-A4 (d)
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110025048
290
Number
FABRICATION OF SOCKS WOOLEN DARK OG KNITTING AND LINKING
Description
FABRICATION OF SOCKS WOOLEN DARK OG (KNITTING & LINKING)
Specification
PROV/OCFS/SOCKS/ARMY/NEW (64) (a)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
9911037217
142500
Pair
PULL THROUGH 5 point 56 MM 1A NYLON TO DS CAT NO 1005 557944 DC I NO 26532 SA DT 30 07 10
Description
PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Specification
PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Drawing no.
S CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
71
224133
Number
TRADE ASSISTANCE FOR FIXING OF PLY WITH NAILING FINISHING AND HINGE FIXING OF SKID BOARD MI 8
Description
TRADE ASSISTANCE FOR FIXING OF PLY WITH NAILING,FINISHING AND HINGE FIXING OF SKID BOARD MI-8
Specification
Specn No. IND/GS/1726 (c)
Manufacturing Technology
as per specification and drawing attached.
Testing / Inspection Facility
visual mechanical chemical and as per specification attached
21
as per requirement
Number
ACCURACY STAND FOR LMG
Physical Verification needed
Description
ACCURACY STAND FOR 7.62X51MM BELT FEED LMG, AS PER DRG. NO. 1804 02 00 00 00 000 00DA.
Specification
ACCURACY STAND FOR 7.62X51MM BELT FEED LMG, AS PER DRG. NO. 1804 02 00 00 00 000 00DA.
Drawing no.
1804 02 00 00 00 000 00DA.
Testing / Inspection Facility
Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
70
1
Number
AMMUNITION POUCH FOR LMG
Physical Verification needed
Description
AMMUNITION POUCH FOR LMG 7. 62 MM BELT FED . AS PER DRG.NO.1804 03 00 00 00 000 00DA.
Specification
AMMUNITION POUCH FOR LMG 7. 62 MM BELT FED . AS PER DRG.NO.1804 03 00 00 00 000 00DA.
Drawing no.
1804 03 00 00 00 000 00DA.
Manufacturing Technology
Sheet Metal Work & Stitching
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification
72
20
Number
9069112768 RING WELDING AND MACHINING BOF 4020632
Physical Verification needed
Description
9069112768 RING WELDING AND MACHINING BOF 4020632
Specification
9069112768 RING WELDING AND MACHINING BOF 4020632
Manufacturing Technology
9069112768 RING WELDING AND MACHINING BOF 4020632
Testing / Inspection Facility
9069112768 RING WELDING AND MACHINING BOF 4020632
90
56
Number
PLATE TO PART NO BOF 6104429
Physical Verification needed
Description
PLATE TO PART NO BOF 6104429
Specification
PLATE TO PART NO BOF 6104429
Manufacturing Technology
PLATE TO PART NO BOF 6104429
Testing / Inspection Facility
PLATE TO PART NO BOF 6104429
90
34
Number
GUIDE PISTON FRONT TO PART 5050115
Physical Verification needed
Description
GUIDE PISTON FRONT TO PART 5050115
Specification
GUIDE PISTON FRONT TO PART 5050115
Manufacturing Technology
GUIDE PISTON FRONT TO PART 5050115
Testing / Inspection Facility
GUIDE PISTON FRONT TO PART 5050115
90
7
Number
PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932
Physical Verification needed
Description
PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932
Specification
PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932
Manufacturing Technology
PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932
Testing / Inspection Facility
PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932
90
24
Number
PIN SECURING TO PART NO 6115897
Physical Verification needed
Description
PIN SECURING TO PART NO 6115897
Specification
PIN SECURING TO PART NO 6115897
Manufacturing Technology
PIN SECURING TO PART NO 6115897
Testing / Inspection Facility
PIN SECURING TO PART NO 6115897
90
64
Number
SOCKET PLUG TO PART NO IAN 283 SA
Physical Verification needed
Description
SOCKET PLUG TO PART NO IAN 283 SA
Specification
SOCKET PLUG TO PART NO IAN 283 SA
Manufacturing Technology
SOCKET PLUG TO PART NO IAN 283 SA
Testing / Inspection Facility
SOCKET PLUG TO PART NO IAN 283 SA
90
2
Number
FRONT PLATE MIDDLE
Physical Verification needed
Description
FRONT PLATE MIDDLE
Testing / Inspection Facility
62
6 NOS
Number