PVC MASTER BATCHES GREY, BLACK

PVC MASTER BATCHES GREY, BLACK

PVC COMPOUNDS WL 80B LT-42

PVC COMPOUNDS WL 80B LT-42

HDPE GRADE B52A003 (GAIL)/W43006 (RELIANCE)/54GB012(IPCL) TO SPECN. CQAL/534

HDPE GRADE B52A003 (GAIL)/W43006 (RELIANCE)/54GB012(IPCL) TO SPECN. CQAL/534

DRUM CABLE STEEL 1A AS PER DRG. & SPECN. CIL/3240(SHEET NO. 1,2,4,6,7,8) AS PER CIL 3240 (6SHEET) AS PER ISSUE NO.5

DRUM CABLE STEEL 1A AS PER DRG. & SPECN. CIL/3240(SHEET NO. 1,2,4,6,7,8) AS PER CIL 3240 (6SHEET) AS PER ISSUE NO.5

As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

REELS CABLE DRUM AS PER DRAWING ATTACHED

REELS CABLE DRUMAS PER DRAWING ATTACHED

• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

as per TE

as per TE

as per TE

Paint Olive green RM ISC-220/IS-5-94

Paint Olive green RM ISC-220/IS-5-94

POLY-URETHANE FOAM 8 MM THICK SHEET OF 190 CMS X 90 CMS

IS: 7933-1975 FLAXIBLE PU FOAM

2 II ARMOUR STEEL PLATE OF SIZE 6 MM

2 II ARMOUR STEEL PLATES SIZE 6 MM THICK X760 MM X 2490 MM TEMPERED AND HARDENED, 470-510 BHN, CHEMICAL COMPOSITION AS PER GOST B19526-74 AND MECHANICAL PROPERTIES AS PER GOST B21967-76

2 II ARMOUR STEEL PLATE 5 MM X 1125 X 1500 MM

TEMPERED AND HARDENED, 470-510 BHN, CHEMICAL COMPOSITION AS PER GOST B19526-74 AND MECHANICAL PROPERTIES AS PER GOST B21967-76

2 II ARMOUR STEEL PLATES SIZE : 4 MM THICK X 360 MM X 2570 MM

HARDENDED & TEMPERED, 470-510 BHN, CHEMICAL COMPOSITION AS PER GOST B19526-74 AND MECHANICAL PROPERTIES AS PER GOST B 21967-76

JSS-8305-11:2007 (REV.NO. 1)

JSS-8305-11:2007 (REV.NO. 1)

CAP TO DRG.NO.OS-34609,MCT-2835 . FOR DFC-7.

CAP TO DRG.NO.OS-34609,MCT-2835 . FOR DFC-7.

MCT-2835

As per OFC Drg. NO. SK-9367/A

As per OFC Drg. NO. SK-9367/A

SK-9367/A

SET OF ELECTRONICS COMPONENTS FOR CONNECTING BOARD TO DRG. NO. 7194.03.00.150 CONTAINING 16 ITEMS AS PER ANNEXURE-A

SET OF ELECTRONICS COMPONENTS FOR CONNECTING BOARD TO DRG. NO. 7194.03.00.150 CONTAINING 16 ITEMS AS PER ANNEXURE-A

7194.03.00.150

SET OF ELECTRONICS COMPONENTS FORPOWER SUPPLY (+/-15V & +5V) TO DRG. NO. 7194.03.09.000 CONTAINING 26 ITEMS AS PER ANNEX. D

SET OF ELECTRONICS COMPONENTS FORPOWER SUPPLY (+/-15V & +5V) TO DRG. NO. 7194.03.09.000 CONTAINING 26 ITEMS AS PER ANNEX. D

7194.03.09.000

SET OF ELECTRONICS COMPONENTS FOR POWER SUPPLY (+30V 12AMP) TO DRG. NO. 7194.03.00.190 CONTAINING 22 ITEMS AS PER ANNEX C.

SET OF ELECTRONICS COMPONENTS FOR POWER SUPPLY (+30V 12AMP) TO DRG. NO. 7194.03.00.190 CONTAINING 22 ITEMS AS PER ANNEXURE-C

7194.03.00.190

SET OF ELECTRONICS COMPONENTS FOR INDICATION BOARD TO DRG. NO. 7084.32.10.000 CONTAINING 16 ITEMS AS PER ANNEXURE-B

SET OF ELECTRONICS COMPONENTS FOR INDICATION BOARD TO DRG. NO. 7084.32.10.000 CONTAINING 16 ITEMS AS PER ANNEXURE-B

7084.32.10.000

METALLIC SLIDE FASTENER HEAVY DUTY 457M LONG OG

SPECH. NO.: IS : 3148

SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING FOIL 0.127MM X 25.4MM WIDE W/0 NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10

SPECN. IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10

SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECNIS-2927-1975 GD. BA CU AG-10,

SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECNIS-2927-1975 GD. BA CU AG-10,

LEADED PHOS.BRONZE ROD 32MM DIA TO SPECN.BS:2874:1969 PB102M

LEADED PHOS.BRONZE ROD 32MM DIA TO SPECN.BS:2874:1969 PB102M

ALUMINIUM ALLOY ROUND 17MM DIA TO SPECN.DTD-5124

SPECN.DTD-5124

STEEL FLAT 6X10MM BS 970 PT.1 : 1983 GD- 070M55

BS 970 PT.1 : 1983 GD- 070M55

ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36 SEC.2. SEPARATE TEST PIECES ARE TO BE HARDENED & TEMPERED TO CONDN."V" TO ACHIEVE HARDNESS293-352 HB MACRO-ETCH TEST & NMIR TEST AS P ER ANNEXURE-A NATURE-C

SPECIFICATION BS:970.PT.1 1983 GD.605M36

CAGE ROLLER BEARING CQA/WPN/1742

AS PER TENDER NO. 160590BMPO ON E-PROC. PORTAL

STEEL FLAT 32X11MM TO SPECN: BS:970: PT-3 1991:GD.835M15 IN HOT ROLLED AND ANNEALED CONDITION REQD. FOR GUIDE FRONT LEFT

SPECN: BS:970: PT-3 1991:GD.835M15 IN HOT ROLLED AND ANNEALED CONDITION

STEEL FLAT 22X18MM SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM)

SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2

SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46 MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET- CH TESTING TO CON IS 13015:1991 & NMIR TEST (ANNEXURE-A ENCL)

SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET- CH TESTING TO CON IS 13015:1991 & NMIR TEST (ANNEXURE-A ENCL)

SPECIFICATION JSS 9510-06:2000 (REV NO.3)CODE REF "B"

• Melting and Rolling

• Chemical and Mechnacial properties as per std.given drawing

STEEL RD 45MM DIA IN HOT ROLLED & ANNELED CONDITION TO SPECN BS:970 PT-3:1991.GD.709M40 .TEST PIECE TO BE TESTED IN`V' CO NDITION

TO SPECN BS:970 PT-3:1991.GD.709M40 .

SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION

SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION

SPECN.BS:970:PT-1:1983 GD.945M38 I

• Melting & Rolling

• As per attachment

SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED

SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED

STEEL RD 12MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40 TEST PIECE TO TESTED AS PER ANNEXURE-A NATURE-C. (REQD.FOR EXTRACTOR PLUNGER OF MAG 7.62MM)

SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40

STEEL RD 25 MM DIA SPECN BS: 970:PT-3:1991 GD.420S29 OR 431 S29 ( REQUIRED FOR GAS REGULATOR DS CAT NO. 1005-006614)

SPECN BS: 970:PT-3:1991 GD.420S29 OR 431 S29

STEEL ROUND 19.05 MM (3/4")DIA IN HOT ROLLED & NORMALISED CONDITION TO SPECN.BS:970 PT-1:1983 GD.605M36 TEST PIECE TO BE TESTED IN 'V' CONDITION.MACRO-ETCH TEST AS PER ANNEXURE-C

SPECN.BS:970 PT-1:1983 GD.605M36

STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.TEST PIECE TO BE TESTED AS PER SPECN.MACROETCH & NMIR TEST AS PER STORE DRG. CLEANLINESS TEST A SEPERATE TP TO BE HEAT TREATED TO ACHIEVE HARDNESS 45-61 HRC.T0 BE ULTRASONICALLY TESTED.(REQD.PISTON)

SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.

STEEL ROUND 14 MM DIA IN HOT ROLLED NORMALISED CONDITION TO SPECN: BS:970: PT31:1991 GD 817 M40 OR 826 M40, TEST PEICE TO BE TESTED IN Z CONDITION

SPECN: BS:970: PT31:1991 GD 817 M40 OR 826 M40,

STEEL STRIP 3.5MM THICK X 32MM WIDE TO SPECN. BS:5770:PT-II:1981 GD.70 OR 80 IN COLD ROLLED & ANNEALED CONDITION MACRO-ETCH TEST & NMIR TEST AS PER ANNEXURE-C A SEPARATE T.P.TO BE QUENCHED ^ TEMPERED TO ACHIEVE HARDNESS 73-76 HRA

SPECN. BS:5770:PT-II:1981 GD.70 OR 80 IN COLD ROLLED & ANNEALED CONDITION

STEEL FLAT TO SPECIFICATION BS:970:PT.3:1991: 070 M55 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION

SPECIFICATION BS:970:PT.3:1991: 070 M55 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION

STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36

SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36

ST.FLAT 70X38MM TO SPECN IS:6603-2001;DISIGNATION X12CR12 OR X20CR13.

SPECN IS:6603-2001;DISIGNATION X12CR12 OR X20CR13.

STEEL ROD 30MM DIA. TO SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' (REQD. FOR FLASH HIDER )

SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S'

STEELROD 44+0.0/-0.50MM DIA.IN CUTLENGTHOF415+2.5/-00MM TOSP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION WITH COMPOSITION RESTRICTED S%-0.010 MAX.P%-0.015 MAX.& (S+P)%-0. 022 MAX.FOR MAG 7.62MM.BARREL FOR OTHER PARAMETERS AS PER QA I NO.QA-1/QA/14 (Q.AOD/VOD)

SP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION

STEEL RD 45MM DIA IN HR & NORMALISED CONDN.TO SPECN.BS:970PT -3:1991.GD.070M55.TEST PIECE TO BETESTED AS PER SPECN.MATL. SHOULD ALSO SATISFY THE TEST AS PER ANNX."C".A SEPERATE TEST PIECES IS TO BE QUENCHED * TEMPERED TO ACHIEVE HARDNESS40-45 HRC. (REQD.FOR-BARREL LOCKING NUT )

SPECN.BS:970PT -3:1991.GD.070M55.

STEEL FLAT 25X32MM(1"X1-1/4")TO SPECN.BS:970:PT-1:1983 GD.080M40 IN HOT ROLLED & NORMALISED CONDITION. MATL TO BE TESTED AS PER ANNEXURE-C (REQD.FOR BAND FRONT SIGHT OF MAG 7.62MM)

SPECN.BS:970:PT-1:1983 GD.080M40

RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510-06-2012 CODE REF .B. T - I COND. WITH COMPOSITION N RESTRICTION S%=0.01 MAX., P%=0.015MAX & (S+P)%=0.022MAX. ANNEXURE NO. 7158/DDO/LMG 5.56MM BARREL FOR TESTING PARA ENCLOSED., QUALITY AOD/VOD.

SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.

• Melting & Rolling

• as per attached document

ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITION TO SPECIFICATION BS:970:PT 1:1983 : GD 708M40

SPECIFICATION BS:970:PT 1:1983 : GD 708M40

ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE TEST PIECE TO B E BLANK CARBURISED HEATTRATED & TESTED FOR COREPROPEERTIES I N ACCORDANCE W/RELEVANT CLAU.OF SPECN 'NI'SPOT TEST TO BE DO NE 100

SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE

ST WIRE SPG 15 SWG(1.829MM)DIA TO SPECN IS:4454:PART1:2001 GRADE "DM" REQUIRED FOR SPRING RETURN OUTER OF 9MM CARBINE.

SPECN IS:4454:PART1:2001 GRADE "DM

ST WIRE SPG 1.626MM (16 SWG)DIA TO SPECN IS:4454 PART1;2001 GRADE 'DM'.

SPECN IS:4454 PART1;2001 GRADE 'DM'.

STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8 TEST PIESE TO BE TES TED AS PER SPECIFICATION.MACRO ETCH TEST AND NMIR TEST. (LENGTH OF BAR MUST BE 300 MM.)

SPECN. IS:5517 -1993, DESIGNATION 40 C8

STEEL RD 19.00MMDIAINHOT ROLLED & NORMALISED CONDITION TO SPECN.IS:5517-1993 DESIGNATION 40C8 LATEST ISSUE TEST PIECE BE TESTED AS PER SPECN.THE MATERIAL SHOULD ALSO SATISFY THE TESTS AS LAID DOWN IN THE ANNEXURE.

SPECN.IS:5517-1993 DESIGNATION 40C8 LATEST ISSUE

STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE TEST PIECE TO BE TESTED AS PER SPECN. MATERIAL SHOULD ALSO SATISF Y THE TESTS AS LAID DOWN IN THE ANNEXURE "A" NATURE "C".

SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE

STEEL TO BS:970 PT-1:1983 835M15 OR EN-39B SQUARE 90MM

STEEL TO BS:970 PT-1:1983 835M15 OR EN-39B SQUARE 90MM

STEEL FLAT 40+0.6MMX50+0.8MM&IN CUT LENGTH OF 70+1.00MM TO SPECN .BS:970:PT.1:1983 GD.817M40.WITH RESTRICTIONS OF S%=0.0 1MAX.,P%=0.015MAX &(S+P)%=0.022MAX IN H.R. AND ANNEALED CONDITION. TEST PIECE TO BE TESTED IN "T" CONDITION.OTHER PARAMETERS AS PER-QAI NO.-QA-1/QAI/15

STEEL FLAT 40+0.6MMX50+0.8MM&IN CUT LENGTH OF 70+1.00MM TO SPECN .BS:970:PT.1:1983 GD.817M40.WITH RESTRICTIONS OF S%=0.0 1MAX.,P%=0.015MAX &(S+P)%=0.022MAX IN H.R. AND ANNEALED CONDITION. TEST PIECE TO BE TESTED IN "T" CONDITION.OTHER PARAMETERS AS PER-QAI NO.-QA-1/QAI/15

• Melting Rolling

• As per the attachment.

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

• Melting and Rolling

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

STEEL ROUND 25 MM DIA.TO SPECN.IS 5517-1993 GD.42 CN4 MO2 LRS-63MM. IN HOT ROLLED AND ANNEALED CONDITION. TEST PIECE TO BE HEAT TREATED TO "T" CONDITION & MECHANICAL PROPERTIES TO BE CHECKED. ( REQD.FOR CYLINDER GAS )

SPECN.IS 5517-1993 GD.42 CN4 MO2 LRS-63MM

STEEL ROUND 27 MM TO SPECN.IS:5570-1993 DEGIGNATION 55C8 IN ANNEALED & COLD DRAWN CONDN. (FOR SLEEVE LOCKING BIPOD).

SPECN.IS:5570-1993 DEGIGNATION 55C8

STEEL STRIP 3.5MM THICK X140MM WIDE TO SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. STRAIGHTENED & IN STD. CUT LENGTH

SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25.

• As per attachment

• As per attachment

ST.FLAT 40X16MM TO SPECN.IS:5517-1993 DEGIGNATION 40 C8(FOR BRACKET FRONT HAND GUARD).

ST.FLAT 40X16MM TO SPECN.IS:5517-1993 DEGIGNATION 40 C8(FOR BRACKET FRONT HAND GUARD).

• Melting & rolling

• 1) Chemical & Mechanical properties as per std. given drawing 2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

ST.STRIP SIZE:- 1.8MM THICK X270MM WIDE X1600MM LONG TO SPECN. IS:7226-1974 GRADE C-40, COLD ROLLED & ANNEALED CONDN. NOTE:- GRAIN DIRECTION SHOULD BE ALONG THE LENGTH.

SPECN. IS:7226-1974 GRADE C-40,

ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).

SPECIFICATION IS:513-(LATEST ISSUE).

Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02

Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02

IQX-1008

PACKING OF STORE FOR JWD-1 CUT OF HESSIAN CLOTH & PAPER WRAPPING OF PAPER & PUTTING UP INSPECTIONS SLIP ON MRT WRAP & STITCH OF HESSAIN CLOTH

PACKING OF STORE FOR JWD-1 CUT OF HESSIAN CLOTH & PAPER WRAPPING OF PAPER & PUTTING UP INSPECTIONS SLIP ON MRT WRAP & STITCH OF HESSAIN CLOTH

MRT OPERATION FOR MANUFACTURING OF JWD-1 CABLE

MRT OPERATION FOR MANUFACTURING OF JWD-1 CABLE

COPPER WIRE ROD 7.9/8MM DIA AS PER SPECIFICATION IS 12444:1988

COPPER WIRE ROD 7.9/8MM DIA AS PER SPECIFICATION IS 12444:1988

SPECIFICATION IS 12444:1988

• Refer to attachment
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

• Refer to attachmentAS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

GALVANIZED STEEL WIRE ROD IMM DIA COILS AS PER SPECN. 02 REVISION NO.2 DATED 25/06/201 (COPY ENCLOSED)

GALVANIZED STEEL WIRE ROD IMM DIA COILS AS PER SPECN. 02 REVISION NO.2 DATED 25/06/201 (COPY ENCLOSED)

• As per attachment

• As per attachment

PIANO WIRE ROD OF DIA 6.3MM TO 7MM OF GRADE:SWRS29A AS PER SPECIFICAION JIS G3502 (AS PER DETAILED SPECIFICATION ANNEXURE-A)

PIANO WIRE ROD OF DIA 6.3MM TO 7MM OF GRADE:SWRS29A AS PER SPECIFICAION JIS G3502 (AS PER DETAILED SPECIFICATION ANNEXURE-A)

INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09

AS PER DRG.

SK-5378R

I.C. of Cocking Bracket for JVPC DRG. No. SK JVPC-598

AS PER DRG.

No. SK JVPC-598

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

• Machining and Assy.

• As per manufacturing Technology machining document

INVESTMENT CASTING FOR LUG TRIPOD AS PER DRG.NO.SK-3706/15.

AS PER DRG.

SK-3706/15.

• machining & assy.

• As per attached document of manufacturing & testing.

INVESTMENT CASTING OF HINGE COVER TO DRG. NO-SK-4760/05*1.

AS PER DRG.

SK-4760/05*1.

INVESTMENT CASTING DOVETAIL TO DRG. NO. SK-3706/35.

AS PER DRG.

NO. SK-3706/35.

INVESTMENT CASTING FOR HOUSING REAR SIGHT AS PER DRG NO.SK-3647*1.

INVESTMENT CASTING FOR HOUSING REAR SIGHT AS PER DRG NO.SK-3647*1.

DRG NO.SK-3647*1.

• Investment Casting

• As per attached document

INVESTMENT CASTING OF BRACKET FOR TR1POD. AS PER DRG. NO.SK-3706/3. DA NO.204/2K DT.06.12.2K.

AS PER DRG.

NO.SK-3706/3. DA NO.204/2K DT.06.12.2K.

INVESTMENT CASTING OF GAS REGULATOR TO DRG.NO. SK-3706/8*

AS PER DRG.

SK-3706/8*

INVESTMENT CASTING OF LEVER CHANGE TO DRG. NO. SK-3706/9*2

AS PER DRG.

SK-3706/9*2