Items open for Registration

Search

Reset
No Advertisement No. Factory Location Items
36241 SAF/MMD/EOI/VR/17-18/1/FF Small Arms Factory The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name Code Quantity Approx Value Select
ROD, GUIDE BELLEVILLE WASHERS TO DS CAT NO. 1005-000585 DC(I) NO. 25310-SA DT- 30.3.02 IN FINISHED CONDITION. 70 300 Number
PLUNGER SPRING CATCH BUFFER BODY FOR MAG 70 300 Number
BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION. 70 300 Number
BUFFER PLATE TO DS CAT NO. 1005-000573 DC(I) NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION. 70 300 Number
SPRING, LINK PIN TO DS CAT NO. 1005-000567 DC(I) NO. 25815-SA DT- 24/07/2003 IN FINISHED CONDITION. 70 300 Number
ROLLER FOR MAG 70 315 Number
EJECTOR 1005-000548 MAG 7.62MM 70 300 Number
PLUNGER CONTROL REAR SIGHT LEAF TO DS CAT NO. 1005-000536 DC(I) NO.25744-SA DT-08/05/2003 IN FINISHED CONDITION. 70 300 Number
SPRING SEAR TRIPPER TO DS CAT NO. 5360-000531 DC (I) NO. 25393-SA DT- 11.6.02 IN FINISHED CONDITION. 70 300 Number
SPRING CATCH COVER IN FINISHED CONDITION DS CAT NO.5360 - 003081 DC(I)NO.25395 SA 12.6.02 70 600 Number
SPRING, CATCH LOCATING SAFETY CATCH TO DS CAT NO. 5360-000529 DC(I) NO. 25387-SA DT- 07.6.2002 IN FINISHED CONDITION. 70 300 Number
EXTRACTOR SPRING TO DS CAT NO. 5360-000525 DC(I) NO. 26311-SA DT- 20.03.07 IN FINISHED CONDITION. 70 300 Number
SPRING EJECTION OPENING COVER TO DS CAT NO. 5360-000523 DC(I) NO. 25387-SA DT- 07.06.02 IN FINISHED CONDITION. 70 300 Number
FRONT AND REAR FEED PAWLS SPRING TO DS CAT NO. 5360-000515 DC(I) NO. 25384-SA DT- 4.6.02 IN FINSHED CONDITION. 70 600 Number
SPRING, HELICAL, COMPRESSION (CATCH PLUNGER) TO DS CAT NO. 5360-000513 DC(I) NO. 25384-SA DT- 4.6.02 IN FINISHED CONDITION. 70 300 Number
SPRING CATCH REARSIGHT CURSOR TO DS CAT NO. 5360-000512 DC(I) NO. 26097-SA DT- 24.9.05 IN FINISHED CONDITION. 70 600 Number
CENTRAL PAWL SPRING DS CAT NO.5360-000514 DC(I) NO.25384-SA DT.04-06-02 70 600 Number
SPRING ADJUSTING SCREW FORESIGHT HOUSING BLOCK Drg. No 5360-000511 70 600 Number
RING,FRONT MOUNTING BUSH DS CAT NO. 3120-004655 DC(I) NO. 25303-SA DT-23.3.2002 IN FINISHED CONDITION. 70 330 Number
BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. 70 330 Number
BODY LOWER FEED MECH SLIDE DS CAT 1005-000475 70 300 Number
LINK LOWER for MAG 70 300 Number
LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING. 70 300 Number
COVER CATCH for MAG 70 600 Number
PIVOT COVER LATCHES SPRING TO DS CAT NO. 1005-000463 DC(I) NO. 25298-SA DT- 19.3.02 70 300 Number
PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 70 300 Number
PIVOT COVER SLIDE GUIDE ROLLER FOR MAG 70 300 Number
ROLLER GUIDE FEED SLIDE(UPPER) TO DS CAT NO. 3120-004658 70 300 Number
CATCH REAR SIGHT CURSOR DS CAT 1005-000434 70 300 Number
36242 T.E. NO. 170173GFFO Gun Carriage Factory The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name Code Quantity Approx Value Select
INDUCTION HARDENING OF TORSION SHAFT LEFT OR RIGHT OF 130 MM 90 748 Number
CATCH REAR SIGHT CURSOR DS CAT 1005-000434 70 600 Number
Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433 70 300 Number
FORE SIGHT HOUSING 70 300 Number
STIRRUP RETAINING FORESIGHT FOR MAG 70 300 Number
SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION. 70 1200 Number
FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION. 70 600 Number
SPRING CIRCLIP FEED PAWL ASSEMBLY TO DS CAT NO. 5365-000386 DC(I) NO. 25395-SA DT- 12.6.02 IN FINISHED CONDITION. 70 300 Number
SPRING BARREL LOCKING CATCH 70 300 Number
NUT RETAINING HANDLE TO DS CAT No. 5310-002660 70 600 Number
SPRING PLUNGER REAR SIGHT LEAF 70 300 Number
BUTTON FEED BOX for MAG 70 300 Number
KNOB BARREL LOCKING CATCH IN FINISHED CONDITION 70 300 Number
PIN RETAINING CATCH FEED COVER IN FINISHED CONDITION DS CAT NO. 5315-001520, DC(I) NO. 26160-SA DATE 14/02/2006 70 300 Number
BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION 70 300 Number
SPRING CORTRIDGE GUIDE POWL PT.NO.69 DS CAT NO 5360-000518 DC(I) NO.25868 SA DT.5.11.03 IN FINISHED CONDITION. 70 300 Number
WOODEN CHEST MG2B FOR MAG 70 300 Number
WASHER FRONT GUIDE RIGHT FOR MAG 70 330 Number
BODY TRIGGER Drg. No 1099 A 06 300 Number
Blank of Body Cover Drg No 23055A SKM 902 1 01 300 Number
ST BLANK OF RECEIVER PLATE LEFT AND RIGHT FOR MAG 01 300 Set
STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT 70 300 Number
BUFFER BODY FOR PLATE BACK ASSY 70 300 Number
BLANK FOR TRAY AS PER DRG.NO.SKM-864 70 300 Number
36243 T.E. NO. 170140FHFO Gun Carriage Factory The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name Code Quantity Approx Value Select
STEEL FLAT SIZE 100 MM X 55 MM X 2.5 METER LENGTH OR ITS MULTIPLE TO IS:5517-1993, DESIGN. 42CR4M02, LRS 100 70 4602 Kilogram
36244 OCFC/PV/2017/TIN Ordnance Cable Factory Chandigarh The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002
Name Code Quantity Approx Value Select
TIN Ingots AS PER SPECIFICATION I 70 3239 Kilogram
36245 No. SAF/MMD/EOI/VR/17-18/1/FF Small Arms Factory The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name Code Quantity Approx Value Select
PLASTIC MOULDED BOX AS PER DRG.NO.SK-4745*2 70 12000 Number
CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 70 12000 Number
SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09 70 36000 Number
GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III 70 12000 Number
CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08 70 12600 Number
CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION 70 12600 Number
CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE 70 12000 Number
PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99 70 24000 Number
STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 70 12600 Number
STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 70 12600 Number
SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 70 36000 Number
SCREW PLUNGER TO DRG NO.PH-1-26 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 70 18000 Number
PLUNGER TO DRG NO. PH-1-24 IN FINISHED CONDITION. D.A. NO.67/99 DT.-15.5.99 70 12600 Number
SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 70 18000 Number
SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 70 36000 Number
SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03 70 18000 Number
PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 70 12000 Number
EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 70 12000 Number
PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008 70 28800 Number
PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 70 13800 Number
BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 70 12000 Number
BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 70 12000 Number
CYLINDER DRG NO PH-4-1 IN FINISHED CONDITION FOR REVOLVER MK -III D.A. NO.- 06/10,DT.17-03-10 70 12000 Number
PLUG AXIS CYLINDER PH-3-4 IN FINISHED CONDITION. D.A. NO. 84/99 DT.-29/6/99 70 12960 Number
STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 70 12600 Number
Proceed