35121
OPF/ADVANCE VR/EOI/JULY-17/ TAPE-01
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
TAPE NYLON 1.6 CM U/D BS 200 KG
Description
SPECIFICATION NO: ADDE/BP/1(b).ROLL LENGTH 50 MTR. EXCLUDING SAMPLING.
Specification
SPECIFICATION NO: ADDE/BP/1(b).ROLL LENGTH 50 MTR. EXCLUDING SAMPLING.
Testing / Inspection Facility
2101776044
307874
Metre
TAPE NYLON 14 MM THICK UNDYED (BS=230 KG)
Description
SPECIFICATION NO.: JSS:8315-06 ROLL LENGTH 55 MTR.INCLUDING SAMPLING.
Specification
SPECIFICATION NO.: JSS:8315-06 ROLL LENGTH 55 MTR.INCLUDING SAMPLING.
Testing / Inspection Facility
2101776043
656443
Metre
FASTENER LOOP TAPE SYNTHETIC 25 MM BLACK
Description
SPECIFICATION N0.: IS:8156.
Specification
SPECIFICATION N0.: IS:8156.
Testing / Inspection Facility
2101830125
5002
Metre
FASTENER HOOK TAPE SYNTHETIC 25 MM BLACK
Description
SPECIFICATION NO. : IS : 8156.
Specification
SPECIFICATION NO. : IS : 8156.
Testing / Inspection Facility
2101830025
4933
Metre
TAPE ELASTIC 50 MM HEAVY DUTY QUALITY 5030 ASH COLOUR
Description
SPECN.NO. :ADRDE/QMS/TDTM/T/2014/01 DT.-10.04.2014
Specification
SPECN.NO. :ADRDE/QMS/TDTM/T/2014/01 DT.-10.04.2014
Testing / Inspection Facility
2101786864
3702
Metre
TAPE COTTON SPL 50 MM OG.
Description
SPECN NO:IND/ADE/0069(c)
Specification
SPECN NO:IND/ADE/0069(c)
Testing / Inspection Facility
2101704712
1622
Metre
Tape cotton special 25mm OG
Description
SPECN.NO.: IS:3255-1979 except that :-
(i)In appearance shade finish and in other respects not defined in this Specn. the material shall conform to the
sealed pattern held of the custody of the controller,CQAT&C, Kanpur. (ii)There shall be no presence of strach. (iii)End in full width to be raised by 2. (iv)Pick/cm(-1) Tolerance to be premitted. (v)100% Sampling/testing/inspection shall be resorted to. (vi) Scouring loss-Mild method is to be followed in view of severe method & shall not except 2%(two percent).
(vii) Sampling plan as per annexure (A) attached.
Specification
SPECN.NO.: IS:3255-1979 except that :-
(i)In appearance shade finish and in other respects not defined in this Specn. the material shall conform to the
sealed pattern held of the custody of the controller,CQAT&C, Kanpur. (ii)There shall be no presence of strach. (iii)End in full width to be raised by 2. (iv)Pick/cm(-1) Tolerance to be premitted. (v)100% Sampling/testing/inspection shall be resorted to. (vi) Scouring loss-Mild method is to be followed in view of severe method & shall not except 2%(two percent).
(vii) Sampling plan as per annexure (A) attached.
Testing / Inspection Facility
2101774706
7164
Metre
TAPE NYLON 13 MM UNDYED (182 KG.)
Description
SPECIFICATION NO. : ADDE/BP/3 (c) ROLL LENGTH 100 MTRS. EXCLUDING SAMPLE.
Specification
SPECIFICATION NO. : ADDE/BP/3 (c) ROLL LENGTH 100 MTRS. EXCLUDING SAMPLE.
Testing / Inspection Facility
2101786882
589204
Metre
TAPE ELASTIC 25 MM UNDYED
Description
SEPCN.IS:9686-1980 AMENDMENT NO. 1 OF Dec.83 and packing & marking schedule no. CQA(T&C)/PMS/130
Specification
SEPCN.IS:9686-1980 AMENDMENT NO. 1 OF Dec.83 and packing & marking schedule no. CQA(T&C)/PMS/130
Testing / Inspection Facility
2101786873
4220
Metre
TAPE NYLON 26 MM THICK O.G.(BS=1000 KG)
Description
SPECIFICATION NO. : ADDE/BP/1(b).
Specification
SPECIFICATION NO. : ADDE/BP/1(b).
Testing / Inspection Facility
2101786872
21469
Metre
TAPE COTTON 6.5 mm U/D B.S. : 36 KG (+) 5 (B.S. amended vide amendment No.1 of Oct72 )
Description
Weight (g/100 m max) has also been amended from 345 to 340 vide amendment No. 1 of Occt"72 SPECIFICATION NO.: IS : 5716 - 1970.
Specification
Weight (g/100 m max) has also been amended from 345 to 340 vide amendment No. 1 of Occt"72 SPECIFICATION NO.: IS : 5716 - 1970.
Testing / Inspection Facility
2101786936
37277
Metre
TAPE NYLON TUBULAR 25.4 MM WHITE 2355 N
Description
SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING
Specification
SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING
Testing / Inspection Facility
2101777058
138372
Metre
TAPE TEXTILE NYLON 19 MM O.G. (BS=1893-N) V.NO.2
Description
SPECIFICATION NO. :JSS:8315-6 OR IS:4228
Specification
SPECIFICATION NO. :JSS:8315-6 OR IS:4228
Testing / Inspection Facility
2101776047
169482
Metre
TAPE NYLON 2.6CM MEDIUM UD BS-600 KG
Description
SPECN. NO. : ADDE/BP/1(b).ROLL LENGTH 100 MTR.EXCLUDING SAMPLING
Specification
SPECN. NO. : ADDE/BP/1(b).ROLL LENGTH 100 MTR.EXCLUDING SAMPLING
Testing / Inspection Facility
2101776039
383194
Metre
100 % POLYESTER TAPE 12.7 MM
Description
1--Width(mm) ---12.7 mm. Appendix B of IS:3846:1984
2--Mass(gm/mt.)--- 8(max). Appendix C of IS:3846:1984
3--Ends in full/width)--- 60+3/-0. IS:1963
4--Picks/cm --- 20+2/-0 (total picks based on two thread working as one. IS:1963
5--Breaking load(20 cm X Full width)("KN.") Minimum-- 1.5 IS:1969
6--Nature of material-- 100% Polyster. IS:667
7--pH Value (Cold Method)--6 to 8.5. IS:1390
8--% Water soluble matter (max)---1%. IS: 3456
9--Weave--- 2/2 Twill weave. Visual
Specification
1--Width(mm) ---12.7 mm. Appendix B of IS:3846:1984
2--Mass(gm/mt.)--- 8(max). Appendix C of IS:3846:1984
3--Ends in full/width)--- 60+3/-0. IS:1963
4--Picks/cm --- 20+2/-0 (total picks based on two thread working as one. IS:1963
5--Breaking load(20 cm X Full width)("KN.") Minimum-- 1.5 IS:1969
6--Nature of material-- 100% Polyster. IS:667
7--pH Value (Cold Method)--6 to 8.5. IS:1390
8--% Water soluble matter (max)---1%. IS: 3456
9--Weave--- 2/2 Twill weave. Visual
Testing / Inspection Facility
2101797675
210646
Metre
100 % POLY. TAPE 25 MM (ROLL LENGTH 100 M EXCLUDING SAMPLE)
Description
1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984
2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984
3- Ends(in full/width)------ 85+4/-0. IS:1963
4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963
5- Breaking load(20 cm X full width)("KN.") Minimum--2.4 IS:1969
6- Nature of material--100% Polyster. IS:667
7- pH Value(Cold Method)--6 to 8.5. IS:1390
8- % Water soluble matter(max)-- 1%. IS:3456
9- Weave-- 2/2 Twill weave. Visual
Specification
1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984
2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984
3- Ends(in full/width)------ 85+4/-0. IS:1963
4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963
5- Breaking load(20 cm X full width)("KN.") Minimum--2.4 IS:1969
6- Nature of material--100% Polyster. IS:667
7- pH Value(Cold Method)--6 to 8.5. IS:1390
8- % Water soluble matter(max)-- 1%. IS:3456
9- Weave-- 2/2 Twill weave. Visual
Testing / Inspection Facility
2101797674
1927327
Metre
Tape Adhesive Film Based 13 MM Wide
Description
SPECIFICATION NO. : IND/GS/1534 (Except Width)
Specification
SPECIFICATION NO. : IND/GS/1534 (Except Width)
Testing / Inspection Facility
2101771605
55216
Metre
35122
2017000092
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
35123
2017000093
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
Fabrication of Bag Kit Universal (Mark-II)
Description
Fabrication of Bag Kit Universal (Mark-II)
Specification
SPCN.-S/2532/Bag Kit Universal OG/TC-6(a)
Testing / Inspection Facility
21
100000
Whole job
35124
OLF/MM-2/T-1706041402
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
MODULATOR ASSEMBLY TO DRG NO AF5.082.018
Description
MODULATOR ASSEMBLY TO DRG NO AF5.082.018
Specification
AS PER DRG NO AF5.082.018
Testing / Inspection Facility
74
229
Number
35125
ORDFYS/FGK/PV-18/ADV-18
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
SPRING AS PER DRG. NO. 5174741
Description
SPRING AS PER DRG. NO. 5174741
Specification
SPRING AS PER DRG. NO. 5174741
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35126
ORDFYS/FGK/PV-18/ADV-17
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
SPRING DRG NO.6365838 & DRG NO-155/COMP-5/108.
Description
SPRING DRG NO.6365838 & DRG NO-155/COMP-5/108. REQD FOR 155MM FH GUN.
Specification
SPRING DRG NO.6365838 & DRG NO-155/COMP-5/108. REQD FOR 155MM FH GUN.
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35127
ORDFYS/FGK/PV-18/ADV-16
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
FINISH MACHINING OF RACK AS PER DRG NO.4080437.
Description
FINISH MACHINING OF RACK AS PER DRG NO.4080437.
Specification
FINISH MACHINING OF RACK AS PER DRG NO.4080437.
Testing / Inspection Facility
72
AS PER REQUIREMENT
Number
35128
ORDFYS/FGK/PV-18/ADV-15
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
SLIDE BAR SIZE- 400X125X65 AS PER DRG. NO.3048396
Description
SLIDE BAR SIZE- 400X125X65 AS PER DRG. NO.3048396 SPEC. NO.INDIGENOUS MATERIAL BS:2874-1986-CZ116 CONND."M".
Specification
SLIDE BAR SIZE- 400X125X65 AS PER DRG. NO.3048396 SPEC. NO.INDIGENOUS MATERIAL BS:2874-1986-CZ116 CONND."M".
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35129
ORDFYS/FGK/PV-18/ADV-14
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
PRE MACHINING ACTUATING AXLE SHAFT DRG.NO.4077843
Description
PRE MACHINING ACTUATING AXLE SHAFT DRG.NO.4077843 MATERIAL BS:970 PT 1983 GRADE 835 M30 COMPONENT OF 155 FH BO
FORS.
Specification
PRE MACHINING ACTUATING AXLE SHAFT DRG.NO.4077843 MATERIAL BS:970 PT 1983 GRADE 835 M30 COMPONENT OF 155 FH BO
FORS.
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35130
ORDFYS/FGK/PV-18/ADV-13
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
FEEDER LEVER DRG.6380630
Description
FEEDER LEVER DRG.6380630
Specification
FEEDER LEVER DRG.6380630
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35131
ORDFYS/FGK/PV-18/ADV-12
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
MATERIAL FOR BEARING SIZE:85MMDIAX150MM
Description
MATERIAL FOR BEARING SIZE:85MMDIAX150MM LENGTH AS PER DRG NO 5174740 SPEC. NO.INDIGENOUS MATERIAL BS:2874-1986-CZ116
CONND."M".
Specification
MATERIAL FOR BEARING SIZE:85MMDIAX150MM LENGTH AS PER DRG NO 5174740 SPEC. NO.INDIGENOUS MATERIAL BS:2874-1986-CZ116
CONND."M".
Testing / Inspection Facility
71
AS PER REQUIREMENT
Kilogram
35132
ORDFYS/FGK/PV-18/ADV-11
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
AXIS PIN AS PER DRG. NO.5174739
Description
AXIS PIN AS PER DRG. NO.5174739 FOR 155 MM FH GUN.
Specification
AXIS PIN AS PER DRG. NO.5174739 FOR 155 MM FH GUN.
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35133
ORDFYS/FGK/PV-18/ADV-10
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
SPRING DRG NO.6 349 432 & DRG NO-155/COMP-5/103.
Description
SPRING DRG NO.6 349 432 & DRG NO-155/COMP-5/103. REQD.FOR 155 MM FH GUN.
Specification
SPRING DRG NO.6 349 432 & DRG NO-155/COMP-5/103. REQD.FOR 155 MM FH GUN.
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35134
ORDFYS/FGK/PV-18/ADV-9
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
SPRING DRG NO-6 365 839 & DRG NO-155/COMP-5/109.
Description
SPRING DRG NO-6 365 839 & DRG NO-155/COMP-5/109. REQD.FOR 155 MM FH GUN.
Specification
SPRING DRG NO-6 365 839 & DRG NO-155/COMP-5/109. REQD.FOR 155 MM FH GUN.
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35135
ORDFYS/FGK/PV-18/ADV-8
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138.
Description
BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138. REQD FOR 155MMM FH GUN.
Specification
BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138. REQD FOR 155MMM FH GUN.
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35136
ORDFYS/FGK/PV-18/ADV-7
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
35137
ORDFYS/FGK/PV-18/ADV-6
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
SPRING DRG NO.6 358 141 & DRG NO-155/COMP-5/117.
Description
SPRING DRG NO.6 358 141 & DRG NO-155/COMP-5/117. REQD.FOR 155 MM FH FUN,
Specification
SPRING DRG NO.6 358 141 & DRG NO-155/COMP-5/117. REQD.FOR 155 MM FH FUN,
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35138
ORDFYS/FGK/PV-18/ADV-5
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
SPRING DRG NO-6 349 450 & DRG NO-155/COMP-5/102.
Description
SPRING DRG NO-6 349 450 & DRG NO-155/COMP-5/102. FOR 155MM FH GUN.
Specification
SPRING DRG NO-6 349 450 & DRG NO-155/COMP-5/102. FOR 155MM FH GUN.
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35139
ORDFYS/FGK/PV-18/ADV-4
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
SPRING DRG NO.6388462(6341993) & DRG NO-155/COMP-5/112.
Description
SPRING DRG NO.6388462(6341993)&DRG NO-155/COMP-5/112. REQD,FOR 155 MM FH GUN.
Specification
SPRING DRG NO.6388462(6341993)&DRG NO-155/COMP-5/112. REQD,FOR 155 MM FH GUN.
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35140
OFD_O022-16
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
PRESSURE DIE CASTING OF BODY TO DRG.NO. ODD/C/1022/1 FOR TNP 165A
Description
PRESSURE DIE CASTING OF BODY TO DRG.NO.
ODD/C/1022/1 FOR TNP 165A
Specification
PRESSURE DIE CASTING OF BODY TO DRG.NO.
ODD/C/1022/1 FOR TNP 165A
Drawing no.
PRESSURE DIE CASTING OF BODY TO DRG.NO. ODD/C/1022/1 FOR TNP 165A
Testing / Inspection Facility
74
588
Number
35141
ORDFYS/FGK/PV-18/ADV-3
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.
Description
EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.
Specification
EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35142
ORDFYS/FGK/PV-18/ADV-2
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
STRIKER
Description
STRIKER AS PER DRG NO.5170280 FOR 155MM FH GUN
Specification
STRIKER AS PER DRG NO.5170280 FOR 155MM FH GUN
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35143
ORDFYS/FGK/PV-18/ADV-1
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
PREMACHINING OF FRAME DRG. NO. 4081488 FG. 510476.
Description
PREMACHINING OF FRAME FOR SP.OF 155 FH BOFORSE DRG. NO. 4081488 FG. 510476.
Specification
PREMACHINING OF FRAME FOR SP.OF 155 FH BOFORSE DRG. NO. 4081488 FG. 510476.
Testing / Inspection Facility
71
AS PER REQUIREMENT
Number
35144
2017000096
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
Yarn Wool Polyamide (80:20) 240 Tex OG
Description
As Per Requirements & Specifications
Specification
As Per Requirements & Specifications
Testing / Inspection Facility
21
526644
Kilogram
35145
MPF/PV/17TE210581
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
THREE TYPES OF CHEMICALS
Description
1. COMPOSITION ISURANE TR-30
2. CAF-4 (100 GRAMS)
3. CATALYST ADYCAT 8
Specification
1. COMPOSITION ISURANE TR-30
2. CAF-4 (100 GRAMS)
3. CATALYST ADYCAT 8
Testing / Inspection Facility
71
286
Ample
35146
MTPF/PV/17TE210578
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
RIGHT BATTERY SEGMENT FOR FUZE FB40 TO DRG NO:3690120.
Description
RIGHT BATTERY SEGMENT FOR FUZE
FB40 TO DRG NO:3690120.
Specification
RIGHT BATTERY SEGMENT FOR FUZE
FB40 TO DRG NO:3690120.
Testing / Inspection Facility
71
26942
Number
35147
MPF/PV/17TE210579
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
35148
MPF/PV/17TE210580
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
TIGHTENING RING FOR FUZE FB 40 TO DRG.NO:3690100
Description
TIGHTENING RING FOR FUZE FB 40 TO DRG.NO:3690100
Specification
TIGHTENING RING FOR FUZE FB 40 TO DRG.NO:3690100
Testing / Inspection Facility
71
9637
Number
35149
OLF/MM-2/T-1706011517
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
UNIT BG29-4S TO DRG NO. BG29-4S.000 (LF-7440205907)
Description
UNIT BG29-4S TO DRG NO. BG29-4S.000 (LF-7440205907)
Specification
UNIT BG29-4S TO DRG NO. BG29-4S.000 (LF-7440205907)
Testing / Inspection Facility
74
55
Number
35150
MTPF/PV/OTE/17TE210600
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
35151
OPF/ADVANCE VR/EOI/JULY-17/ METAL-13
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
STIFFNER PLATE
Description
SPECN-ADRDE/1423
Specification
SPECN-ADRDE/1423
Testing / Inspection Facility
2110036054
44
Number
DISC 155 + - 3 MM THICK 1.8 +0.2/- 0.0 MM
Description
SPECN-ADRDE/1.6.03.05-04-04,sheet no.8/11
Specification
SPECN-ADRDE/1.6.03.05-04-04,sheet no.8/11
Testing / Inspection Facility
2110036056
55
Number
COIL SPRING
Description
SPECN-ADRDE/1.6.03.05-04-04,sheet no.9/11
Specification
SPECN-ADRDE/1.6.03.05-04-04,sheet no.9/11
Testing / Inspection Facility
2110036055
55
Number
PIN FOR LINK 25 M
Specification
ADRDE/1433.
Testing / Inspection Facility
2110029017
55
Number
PULLY FOR LINK 25 M LONG
Specification
ADRDR/1292.
Testing / Inspection Facility
2110029016
55
Number
METALLIC RING
Description
DO/129/93, ADRDE/1293.
Specification
DO/129/93, ADRDE/1293.
Testing / Inspection Facility
2110029015
55
Number
SNAP HOOK STATIC LINE
Description
DRD/357/96 ADRDE/1431.
Specification
DRD/357/96 ADRDE/1431.
Testing / Inspection Facility
2110029014
55
Number
BUCKLE
Description
DRG.NO.DRD/356/96, ADRDE/1428
Specification
DRG.NO.DRD/356/96, ADRDE/1428
Testing / Inspection Facility
2110029013
440
Number
BUCKLE ADRDE 1429 01
Description
BUCKLE ADRDE/1429-01
Specification
BUCKLE A.B.C DRG.NO. ADRDE/1429-01
Drawing no.
BUCKLE A.B.C DRG.NO. ADRDE/1429-01
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2110029012
4356
Number
RING DRD/395/97
Description
DRG.-DRD/395/97 ADRDE/1291.
Specification
DRG.-DRD/395/97 ADRDE/1291.
Drawing no.
DRG.-DRD/395/97 ADRDE/1291.
Testing / Inspection Facility
2110029011
4576
Number
GROMMET WITH WASHER
Description
DRD/375/97 ADRDE/1432.
Specification
DRD/375/97 ADRDE/1432.
Testing / Inspection Facility
2110029010
968
Number
PIN DRD/341/96
Specification
ADRDE/1288.
Testing / Inspection Facility
2110029008
550
Number
35152
OPF/ADVANCE VR/EOI/JULY-17/ METAL-12
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
BUCKLE WITH BAR
Description
BUCKLE WITH BAR
Specification
SPECN-DRD/332/96, ADRDE/1430.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221284
110
Number
RING
Description
SPECN-DRD/393/97,ADRDE/1290.
Specification
SPECN-DRD/393/97,ADRDE/1290.
Testing / Inspection Facility
2101221283
11627
Number
COTTER PIN
Description
SPECN. NO. DRD/340/96,ADRDE/1289(b)
Specification
SPECN. NO. DRD/340/96,ADRDE/1289(b)
Testing / Inspection Facility
2101126382
110
Number
COTTON FELT 6MM THICK
Description
SPECN-BEST TRADE QUALITY.
Specification
SPECN-BEST TRADE QUALITY.
Testing / Inspection Facility
2101126377
80
Number
LINK SOLID FOR HARNESS
Description
SPECN.NO. ADRDE/1212
Specification
SPECN.NO. ADRDE/1212
Testing / Inspection Facility
2110069011
192
Number
HOOK SNAP HARNESS D-18
Description
DRG.NO.ADRDE/7(F).
Specification
DRG.NO.ADRDE/7(F).
Drawing no.
DRG.NO.ADRDE/7(F).
Testing / Inspection Facility
2110040023
240
Number
RELEASE UNIT
Description
DRAWING NO. : DO/196/84
Specification
DRAWING NO. : DO/196/84
Drawing no.
DRAWING NO. : DO/196/84
Testing / Inspection Facility
2110030002
48
Number
EYELET BRASS WITH WASHER 5 MM
Description
DRG. NO. : ADRDE/177(a).
Specification
DRG. NO. : ADRDE/177(a).
Drawing no.
DRG. NO. : ADRDE/177(a).
Testing / Inspection Facility
2110003005
1020
Number
FOAM SYNTHETIC 15 MM THICK 91.4 CMS. WIDTH
Description
SPECN NO. IS:7933-1975
Specification
SPECN NO. IS:7933-1975
Testing / Inspection Facility
2101226191
10
Number
THIMBLE FOR 120 MM BOMB PARACHUTE
Description
SPECN./DRG.NO. CQA(GS)/US/381.
Specification
SPECN./DRG.NO. CQA(GS)/US/381.
Testing / Inspection Facility
2110033001
18500
Number
FIBER GLASS CORE 5 OR 6MM ( BORE SIZE )
Description
SPECN-P6/101/ILLG/FGS.
Specification
SPECN-P6/101/ILLG/FGS.
Testing / Inspection Facility
2110037002
38473
Number
FIBER GLASS TAPE 60MM U/D
Description
SPECN- ADRDE/SPECN/1998/51.
Specification
SPECN- ADRDE/SPECN/1998/51.
Testing / Inspection Facility
2110037001
5194
Number
CAT PART NO 4010 002764 WIRE ROPE FOR PARACHUTE SYSTEM FOR CARLGUSTAF 84mm ILLUMINATING AMMUNITION
Description
CAT PART NO. 4010-002764 WIRE ROPE FOR PARACHUTE SYSTEM FOR CARLGUSTAF 84mm ILLUMINATING AMMUNITION
Specification
SPECN: IND/GS/1887.
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per Specification/drawing
2110032003
63525
Number
STEEL RING
Description
SPECN. NO. IND/GS/1871.
Specification
SPECN. NO. IND/GS/1871.
Testing / Inspection Facility
2110032000
63525
Number
THIMBLE FOR PARACHUTE SYSTEM FOR MORTAR BOMB 81mm ILLUMINATING MK-II VERSION
Description
DRG. NO. ADRDE/1113(a)
Specification
DRG. NO. ADRDE/1113(a)
Drawing no.
DRG. NO. ADRDE/1113(a)
Testing / Inspection Facility
2110052003
72512
Number
PARACHUTE SYSTEM FOR BOMB 51 ILLUMINATING AMMUNITION (THIMBLE)
Description
DRAWING NO. : ADRDE/553-A-1(a).
Specification
DRAWING NO. : ADRDE/553-A-1(a).
Drawing no.
DRAWING NO. : ADRDE/553-A-1(a).
Testing / Inspection Facility
2110057001
72680
Number
PRU-SLEEVE
Description
SPECN-ADRDE/1245
Specification
SPECN-ADRDE/1245
Testing / Inspection Facility
2111659014
103
Number
BUCKLE DSHAPED FOR PTR-M
Description
SPECN-ADRDE/1230(c)
Specification
SPECN-ADRDE/1230(c)
Testing / Inspection Facility
2110005012
412
Number
LACING 'D' RING
Description
SPECN./DRG. NO. ADRDE/1229(d).
Specification
SPECN./DRG. NO. ADRDE/1229(d).
Testing / Inspection Facility
2110005013
824
Number
MILLED STEEL WIRE GALVANISED 0.710 MM (22-MWG)
Description
SPECN NO. IS:280-1962
Specification
SPECN NO. IS:280-1962
Testing / Inspection Facility
2110072000
900
Number
35153
OPF/ADVANCE VR/EOI/JULY-17/ METAL-11
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
TRINGULAR D RING
Description
SPECN-ARM 1350 B 3
Specification
SPECN-ARM 1350 B 3
Testing / Inspection Facility
2110072001
450
Number