Twin Container Assy (without lable) to DRG No IRCL-494 for sub calibre adaptor 219.9 mm to dc(I) no. 18834-w DT. 20-12-03

AS PER DRAWING

WOODEN PACKING BOX,DRG.NO. 998-PB-3393 REQUIRED FOR BILGE PUMP FRONT AS PER SCOPE OF WORK

WOODEN PACKING BOX,DRG.NO. 998-PB-3393 REQUIRED FOR BILGE PUMP FRONT AS PER SCOPE OF WORK

998-PB-3393

STAINLESS STEEL STRIP TO THICKNESS 0.051 mm TO SPECN. SANDVIK 11 R 51 EXTRA HARD ROLLED. ALT. MATL. IS:6911-1922 GRADE X 04 CR.19 NI 9 COLD ROLLED CONDITION

STAINLESS STEEL STRIP TO THICKNESS 0.051 mm TO SPECN. SANDVIK 11 R 51 EXTRA HARD ROLLED. ALT. MATL. IS:6911-1922 GRADE X 04 CR.19 NI 9 COLD ROLLED CONDITION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

GLASS SLAB BF-108

GLASS SLAB BF-108 SIZE:MULTIPLE OF 50 X MULTIPLE OF 50 MM X 50 MM,MAXIMUM SLAB SIZE = 350 X 300 X 50 MM,RADIATION RESISTANT GLASS, REFRACTIVE INDEX ND = 1.582713,ABBE VALUE VD=46.47,OTHER CHARACTERISTICS AS PER SPECN NO. OLF/OPT-GLASS/ SPEC/03-2.DENSITY=3.28 GM/CC.

LENS-3

LENS-3 TO IRDE DRG NO: 138100000201 Go9 FOR DRIVER THERMAL IMAGER (DTI) OF T-90 TANK

LENS-2

LENS-2 TO IRDE DRG NO: 138100000201 Go8 FOR DRIVER THERMAL IMAGER (DTI) OF T-90 TANK

LENS-1

LENS-1 TO IRDE DRG NO: 138100000201 Go7 FOR DRIVER THERMAL IMAGER (DTI) OF T-90 TANK

ROLLED & HEAT-TREATED STEEL FLAT IN FINISHED CONDITION TO SIZE 90(+1.0/-0) MM WIDEX17.2 (+0.2/-0) MM THICKX1800.0 (+/-7.5) MM LONG. STEEL SPECN.GOST.B 19032-73.ST.II I-OA. MATL. SHOULD BE PRODUCED FROM VAR/LFVD ROUTE. (EQUIV.ST.GR: JSS: 9515-12- 2001. & NITROGEN CONTENT SHOULD BE RESTRICTED TO 50 PPM.).

ROLLED & HEAT-TREATED STEEL FLAT IN FINISHED CONDITION TO SIZE 90(+1.0/-0) MM WIDEX17.2 (+0.2/-0) MM THICKX1800.0 (+/-7.5) MM LONG. STEEL SPECN.GOST.B 19032-73.ST.II I-OA. MATL. SHOULD BE PRODUCED FROM VAR/LFVD ROUTE. (EQUIV.ST.GR: JSS: 9515-12- 2001. & NITROGEN CONTENT SHOULD BE RESTRICTED TO 50 PPM.).

Casting for Body of Suction Pump to Drg. No. 172 46 006 2

Casting for Body of Suction Pump to Drg. No. 172 46 006 2

Drg. No. 172 46 006 2

ADHESIVE TYPE -B

IND/ENG/PROV/1193/d

• As Per Specification/Drawing

• As Per Specification/Drawing

CANVAS COTTON 407 GM LOD 105 CM

IND/ADE/0087 (a) Except That 1-Weight, gsm – A tolerance of +-10% shall be applicable to 407 gsm after waterproofing. 2-Count of yarn :-Warp :-2 ply of 20s Single yarn Weft :-3 ply of 24s Single yarn (Note: The count of single yarn is approximate and given for the guidance of the manufacturers. The no. of plies, however, shall not be changed.) 3-No. of threads/ inch:- Warp:-92 Weft:-48 (The tolerance in no. of threads/inch shall be +- 5%) 4-Shade OD (Olive Drab), Shade No. 298 as per IS:5

• As per Drawing/Specification

• As per Drawing/Specification

SPECIFICATION NO. : ADRDE/SPECN/82.

SPECIFICATION NO. : ADRDE/SPECN/82.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

BLANKS FOR BODY CASTING TO GSF DRG. NO. C-1946H DT. 25/04/17

BLANKS FOR BODY TO GSF DRG. NO. C-1946H DT. 25/04/17

C-1946 H

• AS PER ATTACHMENT

• AS PER ATTACHMENT

MACHINED BODY FOR RIFLE 5.56MM ASSAULT RIFLE/EX-CALIBUR, DRG. NO. RF/SK. 9730

BS 970 Pt. 1-1983, 817 M-40 T (BS:970 En24 T)

DRG. NO. RF/SK 970

SELF CENTERING RING NUT FOR FUZE FB40 TO DRG NO 3690010

SELF CENTERING RING NUT FOR FUZE FB40 TO DRG NO 3690010

LEFT SEGMENT OF BATTERY FOR FUZE FB40 TO DRG.NO: 3690110

LEFT SEGMENT OF BATTERY FOR FUZE FB40 TO DRG.NO: 3690110

Cord Nylon Various

Specification No. JSS:4020-9:2013 (Revision No. 3)

i. Sewing Thread Spun Polyester ii. Sewing Thread Cotton

(1). As per Specification No. IND/TC/0296 (b) (2). As per Specification No. IS:9543-1980 (3). As per Specification No. IS:1720-1978

As per the Specification

(1). As per Specification No. CQA(GS)/US/460 and (2.) As per Specification No. IS: 2771

Sizes as per requirement

1. Button made from Polyester 2. Buttons made from Plastic

As per Specification No. IS:1461-1984 (reaffirmed 2003) in various sizes and shapes as per requirement with material - Plastic or Polyester as per requirement specified.

ALLUMINIUM ROD 40MM X 145MM LONG DTD 5124/AA7075 FOR RAW MATERIAL OF BARREL SLEEVE MUZZLE ATTACHMENT OF 12 BORE PUMP ACTION GUN.

MATERIAL:-DTD 5124/AA7075

ALLUMINIUM ROD 90MM X 155MM LONG DTD 5124/AA7075 FOR ROW MATERIAL OF BARREL MUZZLE ATTACHMENT OF 12 BORE PUMP ACTION GUN.

MATERIAL:-DTD 5124/AA7075

Capcell with Adhesive

Capcell with Adhesive

Transportation of Aluminium Ingots from National Aluminium Co Ltd Bhubaneshwar, NALCO Nagar Angul to Ordnance Factory Ambajhari Nagpur in 16 MT Capacity Truck

Transportation of Aluminium Ingots from National Aluminium Co Ltd Bhubaneshwar, NALCO Nagar Angul to Ordnance Factory Ambajhari Nagpur in 16 MT Capacity Truck

Transportation of Defence Stores from Ordnance Factory Ambajhari, Nagpur to Various Ordnance Factory Located In Kolkata

Transportation of Defence Stores from Ordnance Factory Ambajhari, Nagpur to Various Ordnance Factory Located In Kolkata

Requirement of Technical Services for NABL Accreditation

Requirement of Technical Services for NABL Accreditation

Workshop Apron Cotton Drill Navy Blue confirming to IS 177 1989 4th revision with Two Pockets Lower side, Coat type collar, Half Sleeves, Double Stitching and interlock as per Annexure

Workshop Apron Cotton Drill Navy Blue confirming to IS 177 1989 4th revision with Two Pockets Lower side, Coat type collar, Half Sleeves, Double Stitching and interlock as per Annexure

Component Holder to Drg No FS 2852B

Component Holder to Drg No FS 2852B

FS 2852B

Component Holder to Drg No FS 338 C

Component Holder to Drg No FS 338 C

FS 338 C

ELECTRIC MOTOR TO DRG NO ED 76 000 GCH FOR T 90

ELECTRIC MOTOR TO DRG NO ED 76 000 GCH FOR T 90

DRG NO ED 76 000 GCH FOR T-90

CASTING FOR WORM WHEEL TO DRG NO 447A 94 260 CD 2

CASTING FOR WORM WHEEL TO DRG NO 447A 94 260 CD 2

DRG NO 447A 94 260 CD 2

PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL

PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL

F/456D

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-138

AS PER SPECIFICATION

AS PER SPECIFICATION

FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

FRP CASE CARRYING TO DRG NO.IRDE-2606(COMPLETE) MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS)

FORGING FOR PIVOT FOR TURRET ASSY. DRG. NO. OFPM645-01-7318-2

FORGING FOR PIVOT FOR TURRET ASSY.

645-01-7318-2

PRESSURE DIE CASTING TO HOLDER SE-2P, DRG. NO. B-30/DC/8212017/83

PRESSURE DIE CASTING TO HOLDER SE-2P, DRG. NO. B-30/DC/8212017/83

DRG. NO. B-30/DC/8212017/83

MBEU/7074 PA -- HARDSHELL CONTAINER FOR JAGUAR PILOT PARA.

DRG. NO. ADRDE/1454-00(b)

DRG. NO. ADRDE/1454-00(b)

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

COVER ASSY. RHS (A.C. SYSTEM) DRG. NO. 620-01-6010-1/B

COVER ASSY. RHS (A.C. SYSTEM) DRG. NO. 620-01-6010-1/B

620-01-6010-1/B

HOSE FOR POWER STEERING PT NO. X7445200 V1

HOSE FOR POWER STEERING PT NO. X7445200 V1

X7445200 V1

CASTING FOR BODY FOR TURRET ASSY. STEEL 40X GOST 977-75

40X GOST 977-75

765-58-232/A

THREAD SEWING NYLON '66' Bonded BS: 4.5 Kgf. Navy Blue

Spec.No.ADRDE/TDTM/TH/2009/1(c) Dtd:-20.05.21, Shade No. 106 AS PER IS-5-1994 THE THREAD SHOULD BE BONDED THREAD

• As per Specification

• As per Specification

Casting for Bracket for Turret Assy. Drg. No. 675-58-139

Casting for Bracket for Turret Assy.

675-58-139

U-BLOCK SIZE 95X135X165 ST-42-IS-1079 FOR MPV HULL

SIZE 95X135X165 ST-42-IS-1079

PULLY SMALL Prov.Drg. NO. ADRDE/172(b).

Prov. Drg. NO. ADRDE/172(b).

Prov.Drg. NO. ADRDE/172(b).

QUICK RELEASE LOCK TP WITH BUCKLES

DRG.NO.-ADRDE/PAS/2007/16.

DRG.NO.-ADRDE/PAS/2007/16.

• As per Specification/Drawing

• As per Specification/Drawing

SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO. : ADRDE/SPECN/1983/12(a). 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO.: ADRDE/SPECN/1983/12(a) 50 MTR ROLL LENGTH EXCLUDING SAMPLING

SPECIFICATION NO.: ADRDE/SPECN/1983/12(a) 50 MTR ROLL LENGTH EXCLUDING SAMPLING

CORD NYLON BRAIDED 2452-N / 250 KGS

SPECIFICATION NO. : JSS-4020-8

HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.

HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.

HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.

HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.

PLASTIC MOULDING BOX FOR 5.56MM ASSAULT RIFLE & GHAATAK,

MATERIAL:-SEE NOTE

DRG. NO. RFI SK 9941

MODE SELECTOR SWITCH ASSEMBLY AND MODE SELECTOR SWITCH (MSS) AND MSS HOUSING

MODE SELECTOR SWITCH ASSEMBLY AND MODE SELECTOR SWITCH (MSS) AND MSS HOUSING

HINGES FOR REAR DOOR & BONNET ASSY. OF MPV 6 SET/VEH DRG. NO.HULL/MPV/112/B

HINGES FOR REAR DOOR & BONNET ASSY. OF MPV 6 SET/VEH DRG. NO.HULL/MPV/112/B

HULL/MPV/112/B

SHAFT 675-58-313/A FOR RACE RING ASSY. MPV.TURRET

SHAFT

675-58-313/A

HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT

HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D LF 7440200208

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT

HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT

COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9

COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9

HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT

HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT

FLOOR PLATE (TROOPER COMPT) DRG. NO. 640-07-1020-1/C

FLOOR PLATE (TROOPER COMPT) DRG. NO. 640-07-1020-1/C

640-07-1020-1/C

GLASS FRAME (REAR GLASS) PART NO. 640-10-1025-1 DRG. NO. 640-10-1025-1

GLASS FRAME (REAR GLASS) PART NO. 640-10-1025-1 DRG. NO. 640-10-1025-1

640-10-1025-1

LADDER ASSY. DRG. NO. 640-01-2750-1/C

LADDER ASSY. DRG. NO. 640-01-2750-1/C

640-01-2750-1/C

BUMPER ASSY. (CONSISTING OF THREE DRAWINGS) DRG. NO. 620-01-3110-1/F

BUMPER ASSY. (CONSISTING OF THREE DRAWINGS) DRG. NO. 620-01-3110-1/F

620-01-3110-1/F

WELDING ELECTRODES SIZE: 5 MM DEPOSITING 19 CR, 9 NI & 6MN & .40 MO STAINLESS STEEL WELD METAL, SPECIFICATION NO. CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

WELDING ELECTRODES SIZE: 4 MM DEPOSITING 18 CR, 8 NI & 6MN STAINLESS STEEL WELD METAL, SPECN. CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION

WELDING ELECTRODES SIZE: 3.15 MM DEPOSITING 19 CR, 9 NI & 6MN STAINLESS STEEL WELD METAL, SPECN CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE

CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE

DRINKING WATER TANK DRG. NO. 640-01-1450-1/C

DRINKING WATER TANK DRG. NO. 640-01-1450-1/C

640-01-1450-1/C

SEAT BASE ASSY (REAR RHS) DRG. NO. 645-08-1060-1

SEAT BASE ASSY (REAR RHS) DRG. NO. 645-08-1060-1

645-08-1060-1

FUEL TANK ASSY. ( CONSISTING OF SEVEN DRAWINGS) DRG. NO. 640-01-2550-1/D

FUEL TANK ASSY. ( CONSISTING OF SEVEN DRAWINGS) DRG. NO. 640-01-2550-1/D

640-01-2550-1/D

STRETCHER (MEDICAL PURPOSE) SPECN. NO. OFPM/R&D/SP/MPV/ STRETCHER MEDICAL PURPOSE FOR MPV/015

STRETCHER (MEDICAL PURPOSE) SPECN. NO. OFPM/R&D/SP/MPV/ STRETCHER MEDICAL PURPOSE FOR MPV/015

As per Requirements & Specifications

As per Requirements & Specifications

BEARING 5-1000095K TO SPCN TY 4479-73 FOR HEAD OF T-90

TY 4479-73

BEARING 5-1006 TO SPCN. TU 4479-73 FOR HEAD OF T-90

TU 4479-73

BALL BEARING BALL 2.5-100 TO GOST NO. 3722-81 FOR HEAD T-90

GOST 3722-81

BALL BEARING BALL 3.175-40 TO GOST NO. 3722-81 FOR HEAD OF T-90

GOST 3722-81

BEARING 0-1000094 TO GOST NO. 8338-75 FOR HEAD OF T-90

GOST 8338-75

BEARING 0-1000906, GOST 8338-75 SINGLE ROW BALL BEARING SIZE- 30x47x9MM, OPEN TYPE, CLASS OF ACCURACY - 0,

AS PER GOST 8338-75

SPECIFICATION NO. : ADRDE/SPECN/68. ROLL LENGTH 90 MTR.EXCLUDING SAMPLING.

SPECIFICATION NO. : ADRDE/SPECN/68. ROLL LENGTH 90 MTR.EXCLUDING SAMPLING.