Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in
SPG.BARREL LOCKING CATCH IN FINISHED CONDITIONDS CAT NO. 5360-003079 DC(I)NO.25393-SA DT.11.06.02. (MATL.S.S.WIRE 0.75MM DIA ND-3 WILL BE SUPPLIED BY SAF ON B/G FROM L.F.NO.0184012075.)
Specification
SPG.BARREL LOCKING CATCH IN FINISHED CONDITION DS CAT NO. 5360-003079 DC(I)NO.25393-SA DT.11.06.02. (MATL.S.S.WIRE 0.75MM DIA ND-3 WILL BE SUPPLIED BY SAF ON B/G FROM L.F.NO.0184012075.)
COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )
Specification
COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )
COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION
Specification
COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION
COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)
Specification
COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)
SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROT ECTOR SUPPORT SCREW DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02. IN FINISHED CONDITION.
Specification
SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROT ECTOR SUPPORT SCREW DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02. IN FINISHED CONDITION.
Drawing no.
DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02.
FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE) specification
Specification
Specn. No. :- IS:2422-1985.Dye fastness to light may be obtained by Carbon Arc Method also in case Xenon Arc is not available. (a) In appearance shade finish and all other
respects not defined in this specification,the material shall conform to the corresponding to sealed pattern held in the custody of the Controller, CQA(T&C), Kanpur.
(b) Sampling Plan as per Annexure I attached.
