SLEEVE BOLT COVER IN FINISHED CONDITION DS CAT NO.1005-00662 4 DC (I) NO.26159-SA,DT.09-02-06 (MATL.ST.ROD 1/2" DIA GD.605M36 FROM L.F NO.0283001013/02830 00012 WILL BE SUP.BY.SAF .ON B/G.
Specification
SLEEVE BOLT COVER IN FINISHED CONDITION DS CAT NO.1005-00662 4 DC (I) NO.26159-SA,DT.09-02-06 (MATL.ST.ROD 1/2" DIA GD.605M36 FROM L.F NO.0283001013/02830 00012 WILL BE SUP.BY.SAF .ON B/G.
CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. ( MATL.AL.FLAT 115X12MM FROM L.F.NO.0611530090 WILL BE SUPPL IED BY SAF ON B/G.)
Specification
CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. ( MATL.AL.FLAT 115X12MM FROM L.F.NO.0611530090 WILL BE SUPPL IED BY SAF ON B/G.)
PAWL FEED FRONT TO DS CAT NO.1005-006637 DC(I) NO. 25321-SA DT- 08.04.02 (I.C.DRG.NO. SKM 740*2 AGAINST LF NO. 0145077022 WILL BE SUPPLIED BY SAF AGAINST B/G)
Specification
PAWL FEED FRONT TO DS CAT NO.1005-006637 DC(I) NO. 25321-SA DT- 08.04.02 (I.C.DRG.NO. SKM 740*2 AGAINST LF NO. 0145077022 WILL BE SUPPLIED BY SAF AGAINST B/G)
CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.
Specification
CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.
CATCH CARRYING HANDLE TO DS CAT NO. 1005-006623 DC(I) NO. 25501-SA DT- 05-09-02 (IC DRG.NO. SKM- 755*4 AGAINST LF NO. 0142077007 WILL BE SUPPLIED BY SAF AGAINST BANK GUARANTEE)
Specification
CATCH CARRYING HANDLE TO DS CAT NO. 1005-006623 DC(I) NO. 25501-SA DT- 05-09-02 (IC DRG.NO. SKM- 755*4 AGAINST LF NO. 0142077007 WILL BE SUPPLIED BY SAF AGAINST BANK GUARANTEE)
SPG.BARREL LOCKING CATCH IN FINISHED CONDITIONDS CAT NO. 5360-003079 DC(I)NO.25393-SA DT.11.06.02. (MATL.S.S.WIRE 0.75MM DIA ND-3 WILL BE SUPPLIED BY SAF ON B/G FROM L.F.NO.0184012075.)
Specification
SPG.BARREL LOCKING CATCH IN FINISHED CONDITION DS CAT NO. 5360-003079 DC(I)NO.25393-SA DT.11.06.02. (MATL.S.S.WIRE 0.75MM DIA ND-3 WILL BE SUPPLIED BY SAF ON B/G FROM L.F.NO.0184012075.)
COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )
Specification
COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )
COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION
Specification
COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION
COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)
Specification
COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)
SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROT ECTOR SUPPORT SCREW DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02. IN FINISHED CONDITION.
Specification
SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROT ECTOR SUPPORT SCREW DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02. IN FINISHED CONDITION.
Drawing no.
DS CAT NO. 5305-011218 DC (I) NO. 25349-SA DT. 30.04.02.
