TAPE NYLON 26 MM 2150 kgf

Specn. No.- ADRDE/SPECN/70(b), variety No. 1 Page No. 15 of 25 as per No. ADRDE/QMS/TDTM/SPECN/85.

• As per Specn/Drg

• As per Specn/Drg

TAPE TUBULAR NYL 18 MM BS 700 KG U/D

ADRDE/SPECN/1992/38 (b)

• As per Specification/Drawing

• As per Specification/Drawing

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

specn.no:-ADRDE/QMS/TDTM/SPECN/93

specn.no:-ADRDE/QMS/TDTM/SPECN/93

ADRDE/1984/24

ADRDE/1984/24

ADDE/BP/1(b)WITH 20-30 % ELONGATION & PROPER HEAT SETTING.

ADDE/BP/1(b)WITH 20-30 % ELONGATION & PROPER HEAT SETTING.

ADRDE/1985/27(a) WITH PROPER HEAT SETTING

ADRDE/1985/27(a) WITH PROPER HEAT SETTING

ADRDE/BP/1(b) with 20-30 % elongation & proper heat setting

ADRDE/BP/1(b) with 20-30 % elongation & proper heat setting

HOLDER,OPTICAL ELEMENT AS PER DRG.NO.:IRDE-335/14

HOLDER,OPTICAL ELEMENT AS PER DRG.NO.:IRDE-335/14

IRDE-335/14

DOVETAIL FEMALE AS PER DRG. NO.CWC-231/2/1

DOVETAIL FEMALE AS PER DRG. NO.CWC-231/2/1

CWC-231/2/1

LOCKING PLATE AS PER DRG.NO.CWC/229/68/1

LOCKING PLATE AS PER DRG.NO.CWC/229/68/1

CWC/229/68/1

SLIDE REAR SIGHT FOR 30-06 SPORTING RIFLE, DRG. NO. TSP-314

BS:970 PT.1 GR 070 M55 OR En-9 TRATMENT:- HRD. & GRD. TO 300-350 H.V.

DRG. NO. TSP-314

L.C FERRO MANGANESE, GRADE:O2FeMn72 PARTICLE SIZE CLASS:5, AS PER IS: 1171-2011, %MN=70-74; %C=0.20 MAX, %SI=1.0 MAX; %S=0.05 MAX; %P=0.30 MAX; PARTICLE SIZE RANGE: 3.12 TO 25MM.

L.C FERRO MANGANESE, GRADE:O2FeMn72 PARTICLE SIZE CLASS:5, AS PER IS: 1171-2011, %MN=70-74; %C=0.20 MAX, %SI=1.0 MAX; %S=0.05 MAX; %P=0.30 MAX; PARTICLE SIZE RANGE: 3.12 TO 25MM.

STEEL ROUND BAR DIA 50 MM X STD LENGTH TO GRADE 40Cr4 Mo3. IS: 5517.

STEEL ROUND BAR DIA 50 MM X STD LENGTH TO GRADE 40Cr4 Mo3. IS: 5517.

Aviation Compressor-performance Testing Machine Terms and conditions as per Annexure A.

Aviation Compressor-performance Testing Machine Terms and conditions as per Annexure A.

AIR COMPRESSOR SET UP FOR TESTING COMPRESSOR

MFG AND SUPPLY OF ROUGH MACHINED BODY TO DRG NO 118 BODY 3400 AS PER SCOPE OF WORK MA 11 110 8 24 DT 15 06 2017

MFG AND SUPPLY OF ROUGH MACHINED BODY TO DRG NO 118 BODY 3400 AS PER SCOPE OF WORK MA 11 110 8 24 DT 15 06 2017

DRG NO 118 BODY 3400 AS PER SCOPE OF WORK MA 11 110 8 24 DT 15 06 2017

SPECN. NO. ADRDE/1159-A-2/SA-6

SPECN. NO. ADRDE/1159-A-2/SA-6

PACK OPENING SPRING ELASTIC 89 MM

ADRDE/781(d)EXCEPT FOR LENGTH

• As per Specification/Drawing

• As per Specification/Drawing

PACK OPENING SPRING ELASTIC 203 MM

ADRDE/781(d)EXCEPT FOR LENGTH

ADRDE/781(d)

• As per Specification/Drawing

• As per Specification/Drawing

PULLY SMALL Prov.Drg. NO. ADRDE/172(b).

Prov. Drg. NO. ADRDE/172(b).

Prov.Drg. NO. ADRDE/172(b).

CATCH ASSY TO PT. NO. ISV-1A

CATCH ASSY TO PT. NO. ISV-1A

CATCH ASSY TO PT. NO. ISV-1A

I/C OF BRACKET BACK SIGHT FOR 7.62MM ASSAULT RIFLE (GHAATAK)AS PER DRAWING NO. RFI SK NO. 9836

I/C OF BRACKET BACK SIGHT FOR 7.62MM ASSAULT RIFLE (GHAATAK)AS PER DRAWING NO. RFI SK NO. 9836

RFI SK NO. 9836

STEEL 32MM(+/-0.50MM)TO SPECN.BS:970 PT-I:1983,GD 708 M40'T'COND. OR EN-19A. V.D IN HR.PILLED & ANNEALED COND(240HV.MAX)MAINTAINED S&P COMBINED 0.022%MAX.TO LENGTH 530MM. WITH NMIRTEST AS PER IS:4163-82. FOR BARREL(NPB),12 BORE(NPB)PAG.

STEEL 32MM(+/-0.50MM)TO SPECN.BS:970 PT-I:1983,GD 708 M40'T'COND. OR EN-19A. V.D IN HR.PILLED & ANNEALED COND(240HV.MAX)MAINTAINED S&P COMBINED 0.022%MAX.TO LENGTH 530MM. WITH NMIRTEST AS PER IS:4163-82. FOR BARREL(NPB),12 BORE(NPB)PAG.

STOCK SIDE RIGHT FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003177

MOULDING POWDER, MOULDING PLASTICS (PHENOLIC) TO SPECN. NO. JSS 1097 GRD. 'Z' WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa, OR NYLON 66 GP COLOUR BLACK TO SPECN DEF/STAN 93-8/1 WITHOUT GLASS FIBRE FINISH OF END PRODUCT OF STOCK SIDE RIGHT SHALL BE COLOUR BLACK (MATT. FINISH)

DRG. NO. DS CAT NO-1005-003177

STOCK SIDE LEFT FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003176

MOULDING POWDER, MOULDINGPLASTICS (PHENOLIC) TO SPECCN NO. JSS 1097 GRD. "Z" WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa/ or nylon 66 gp colour black to specn deef/ stan 93-8/1 without glass fibre. finish of end product of stock side left shall be colour black (matt. finish)

DRG. NO. DS CAT NO-1005-003176

MAGAZINE ASSY. FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003190, 1005-003191, 1005-003192

AS PER DRAWING

DRG. NO. DS CAT NO-1005-003190, 1005-003191, 1005-003192

GUIDE SPRING MAIN ASSY FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-5360-007390

CROMIUM ALLOY STEEL BALL TO SPECN. IS:2898-1976 H.T./HARDNESS

DRG. NO. DS CAT NO-5360-007390

SLING SUB ASSY. FOR 12 BORE PUMP ACTION GUN, DRG. NO. DS CAT NO-1005-007815, 1005-007994, 1005-007995

AS PER DRAWING

DRG. NO. DS CAT NO-1005-007815, 1005-007994, 1005-007995

SEAR FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003172

IS:3748 : 1990 DESIGNATION 75 T-6

DRG. NO. DS CAT NO-1005-003172

CATCH MAGAZINE FINISH FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003148

BS:970 M40 IS:3748-1990 DESIGNATION 75. T-6

DRG. NO. DS CAT NO-1005-003148

PLATE LOCKING FOR PISTOL AUTO 9MM 1A, DRG. NO. DS CAT NO-1005-003205

BS:970 PAET 3:1991 GRADE 708 M40 CONDITION 'R' IS:5517-1993 DESIGNATION 42 Cr Mo 2

DRG. NO. DS CAT NO-1005-003205

LOOP LANYARD ASSY. FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003166, 1005-003167, 1005-003168

STEEL BS:5216-75 CODE NS OR HS Gr 1 OR 2 OR BS5216-75 CODE ND OR HD Gr 2 or IS:4454 PT.I-1975 Gr 1 & 2

DRG. NO. DS CAT NO-1005-003166, 1005-003167, 1005-003168

ARM SEAR CONNECTINGT FOR 9MM AUTO PISTOL 1A, DRG. NO.- DS CAT NO 1005-003196

IS:2507 : 1975 GRADE 6, DESIG. 80 C6

DRG. NO.- DS CAT NO 1005-003196

SLIDE FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003210

IS:5517-1993 DESIGNATION 42 Cr 4 Mo 2 LRS190mm

DRG. NO. DS CAT NO-1005-003210

LOWER BLOCK BARREL FOR TEAR GAS GUN, DRG. NO. TGG-103

BS:970 : PART 1 : 1983 070 M55 (EN-9) ALTERNATE MATL. BS:970 : PART 1:1983 708 M40 (EN-19A)

DRG. NO. TGG-103

UPPER BLOCK BARREL FOR TEAR GAS GUN, DRG. NO. TGG-102

BS:970 : PART 1 : 1983 070 M55 (EN-9) ALTERNATE MAT : BS:970 : PART 1 : 1983 708 M40 (EN-19A)

DRG. NO. TGG-102

BRACKET REAR SIGHT FOR 0.22" SPORTING RIFLE.DRG. NO. SPR-024*2

STEEL B.S. 970 En-19A

.DRG. NO. SPR-024*2

BOLT BREECH FOR 0.22" SPORTING RIFLE. DRG. NO. SPR-013

BS. 970 EN 19A (T)

DRG. NO. SPR-013

BODY FOR 0.22" SPRTING RIFLE, DRG. NO. SPR-012*4

BS 970 EN 19A (T-CONDITION) WITH NON METALLIC INCLUSION RATING TEST

DRG. NO. SPR-012*4

BLOCK EJECTOR FOR 0.22" SPORTING RIFLE, DRG. NO. SPR-032*2

BS:970 EN 19A (T) PHOSPHETED TO SPECN JSS:0465-01 CLASS II OIL FINISH

DRG. NO. SPR-032*2

SLIDE FOR 0.32" PISTOL,DRG. NO. RFI/SK. 9920

STEEL BS:970 PT .1. 1994 GRADE 070 M55 (EN-9) TREATMENT:-BEFORE MACHINING 220 TO 260 HV

DRG. NO. RFI/SK. 9920

COCKING PIECE FOR 12 BORE PUMP ACTION GUN, DRG. NO. PAG-0037

BS:970 PT.I-83. 709 M 40 'W' CONDITION.

DRG. NO. PAG-0037

BREECH BLOCK SLIDE FOR 12 BORE PUMP ACTION GUN, DRG. NO. PAG0065

IS:4368-1967 Gd-13. Ni3 Cr80 CASE HARDNESS:-500-550 VPN CASE DEPTH:-0.6 TO 1mm

DRG. NO. PAG0065

Wooden Packing Box to Drg. No. 998-PB-3383 Required for IGB T90/T-72-OE/OH as per Scope of Work

Wooden Packing Box to Drg. No. 998-PB-3383 Required for IGB T90/T-72-OE/OH as per Scope of Work

Drg. No. 998-PB-3383

Manufacture & Supply Of Rough Machined Driving Gear Forgings to Drg. No. 118-Drive Gear – 3399 as per Scope of Work/MA-11/1108/23 Dtd: 13-06-2017

Manufacture & Supply Of Rough Machined Driving Gear Forgings to Drg. No. 118-Drive Gear – 3399 as per Scope of Work/MA-11/1108/23 Dtd: 13-06-2017

Drg. No. 118-Drive Gear – 3399

MACHINED BODY FOR 7.62MM ASSAULT RIFLE, DRG. NO. RFI SK. NO. 9846

BS:970 PT 1:1983 817 M40(T) BS:970 PT EN 24(T)

DRG. NO. RFI SK. NO. 9846

MACHINED BODY FOR RIFLE 5.56MM ASSAULT RIFLE/EX-CALIBUR, DRG. NO. RF/SK. 9730

BS 970 Pt. 1-1983, 817 M-40 T (BS:970 En24 T)

DRG. NO. RF/SK 970

SCREW SUPPORT ADJUSTING AS PER DRG.NO.MCT-1079 FOR TELE.SIGHT MK-III

SCREW SUPPORT ADJUSTING AS PER DRG.NO.MCT-1079 FOR TELE.SIGHT MK-III

MCT-1079

CATCH,RANGE DRUM AS PER DRG. NO. CQA(I)-792/1

CATCH,RANGE DRUM AS PER DRG. NO. CQA(I)-792/1

CQA(I)-792/1

RING SECURING DRG.NO.CWC/229/30/2

RING SECURING DRG.NO.CWC/229/30/2

CWC/229/30/2

CELL GRATICULE DRG.NO.CWC/229/28/2

CELL GRATICULE DRG.NO.CWC/229/28/2

CWC/229/28/2

CELL EP DRG.NO.CWC/229/35/1

CELL EP DRG.NO.CWC/229/35/1

CWC/229/35/1

COVER PLATE-H DRG.NO.CWC/229/64/3

COVER PLATE-H DRG.NO.CWC/229/64/3

CWC/229/64/3

RING RETAINING EP DRG.NO.CWC/229/33/1

RING RETAINING EP DRG.NO.CWC/229/33/1

CWC/229/33/1

OPTICAL GLASS BAK-4-569561IN CYLINDRICAL SHAPE DIA 28MM+1MM-0.5MM, BLANK THICKNESS 7MM+0.5M-0MM IS :1400-1960, STRAIE GRADE A INCLUSION GRADE SMALL B FINE ANNEALED BIREFRIGERENCE NOT MORE THAN 10 NM/CM

OPTICAL GLASS BAK-4-569561IN CYLINDRICAL SHAPE DIA 28MM+1MM-0.5MM, BLANK THICKNESS 7MM+0.5M-0MM IS :1400-1960, STRAIE GRADE A INCLUSION GRADE SMALL B FINE ANNEALED BIREFRIGERENCE NOT MORE THAN 10 NM/CM

OPTICAL GLASS BAK-4-569561IN CYLINDRICAL SHAPE DIA 28MM+1MM-0.5MM, BLANK THICKNESS 11MM+0.5M-0MM IS :1400-1960, STRAIE GRADE A INCLUSION GRADE SMALL B FINE ANNEALED BIREFRIGERENCE NOT MORE THAN 10 NM/CM

OPTICAL GLASS BAK-4-569561IN CYLINDRICAL SHAPE DIA 28MM+1MM-0.5MM, BLANK THICKNESS 11MM+0.5M-0MM IS :1400-1960, STRAIE GRADE A INCLUSION GRADE SMALL B FINE ANNEALED BIREFRIGERENCE NOT MORE THAN 10 NM/CM

OPTICAL GLASS BAK-4-569561IN CYLINDRICAL SHAPE DIA 28MM+1MM-0.5MM, BLANK THICKNESS 11MM+0.5M-0MM IS :1400-1960, STRAIE GRADE A INCLUSION GRADE SMALL B FINE ANNEALED BIREFRIGERENCE NOT MORE THAN 10 NM/CM

GRATICULE RING DRG.NO.CWC/229/67/2

GRATICULE RING DRG.NO.CWC/229/67/2

CWC/229/67/2

COVER PLATE-F AS PER DRG.NO.CWC/229/63.

COVER PLATE-F AS PER DRG.NO.CWC/229/63.

CWC/229/63.

COVER PLATE-C AS PER DRG.NO.CWC-229/76.

COVER PLATE-C AS PER DRG.NO.CWC-229/76.

CWC-229/76.

OPTICAL GLASS EDF-699301 OR SF 15 SLAB SIZE :300-400 X120-18 X30-75 MM STRAIE GRADE A INCULSION GRADE SMALL B FINE ANNEALED SO THAT STRESS BIREFRIGERENCE IS NOT MORE THAN 10 NM PER CM AS PER IS 1400-1960. MELT DATA SHEET TO BE PROVIDED BY SUPPLIER WITH GLASS SUPPLY

OPTICAL GLASS EDF-699301 OR SF 15 SLAB SIZE :300-400 X120-18 X30-75 MM STRAIE GRADE A INCULSION GRADE SMALL B FINE ANNEALED SO THAT STRESS BIREFRIGERENCE IS NOT MORE THAN 10 NM PER CM AS PER IS 1400-1960. MELT DATA SHEET TO BE PROVIDED BY SUPPLIER WITH GLASS SUPPLY

SECURING RING DRG.NO.CWC/229/56/1 FOR II TUBE

SECURING RING DRG.NO.CWC/229/56/1 FOR II TUBE

CWC/229/56/1

SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.

SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.

DRAWING ADRDE/271(b)

STEEL SHEET 1.00 MM THICK X (1000 X 2500 MM LONG) TO SPECN IS:5986-2002 GD Fe 410 HOT ROLLED & ANNEALED OR IS:2062-19999 GD Fe410WA OR IS 1079-1988 GD ST42

STEEL SHEET 1.00 MM THICK X (1000 X 2500 MM LONG) TO SPECN IS:5986-2002 GD Fe 410 HOT ROLLED & ANNEALED OR IS:2062-19999 GD Fe410WA OR IS 1079-1988 GD ST42

LEAD ALLOY GRADE: 4NOCCY (POSSU) 18-2 GOST: 21930-76. COMPOSITION: TIN: 1.8 TO 2.3, CADMIUM: 17.5 TO 18.5. LEAD: REST.

LEAD ALLOY GRADE: 4NOCCY (POSSU) 18-2 GOST: 21930-76. COMPOSITION: TIN: 1.8 TO 2.3, CADMIUM: 17.5 TO 18.5. LEAD: REST.

LOW TEMPERATURE PVC COMPOUND[NATURAL COLOUR]WITHSTAND UPTO -55DEG.CENT. AS PER ENCLOSED OCFC, SPECIFICATION NO.04 ISSUE NO.01 DATED 16/05/2006 REVISION NO.02 DATED07/09/2017

ATTACHED

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

ALUMINIUM MANGANESE MASTER ALLOY (10% MANGANESE Fe: 0.30 MAX AND ALUM: REMINDER SHAPE & SIZE AS PER IS: 1820-1979 (INGOT WEIGHT: 5KGS.)

ALUMINIUM MANGANESE MASTER ALLOY (10% MANGANESE Fe: 0.30 MAX AND ALUM: REMINDER SHAPE & SIZE AS PER IS: 1820-1979 (INGOT WEIGHT: 5KGS.)

PVC MASTER BATCH(GREY) AS PER ENCLOSED OCFC SPECIFICATION NO.01 ISSUE NO.02 DATED 01/07/2010 REVISION NO.01 DATED 07/09/2017

ATTACHED

• AS PER DRAWING ATTACHED
• AS PER DRAWING ATTACHED
• AS PER DRAWING ATTACHED
• AS PER DRAWING ATTACHED
• AS PER DRAWING ATTACHED

• AS PER DRAWING ATTACHED
• AS PER DRAWING ATTACHED
• AS PER DRAWING ATTACHED
• AS PER DRAWING ATTACHED
• AS PER DRAWING ATTACHED

DRUM CABLE STEEL 1A AS PER DRG. & SPECN. CIL/3240(SHEET NO. 1,2,4,6,7,8) AS PER CIL 3240 (6SHEET) AS PER ISSUE NO.5

DRUM CABLE STEEL 1A AS PER DRG. & SPECN. CIL/3240(SHEET NO. 1,2,4,6,7,8) AS PER CIL 3240 (6SHEET) AS PER ISSUE NO.5

As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

COLD DRAWN GROUNDED ROUND BAR DIA 40 MATL.STAINLESS STEEL Z10 CNF-18-09 OF JGINE WITH CERT IFICATE OF CONFORMITY ALT.MATL .STAINLESS STEEL 1B/B/2 OF VAL BRUNA STEEL WORK WITH CERTIFIC ATE OF CONFORMITY ALT.MATL.303 OF US STANDARD EQ.MATL.BS 303 S21.

COLD DRAWN GROUNDED ROUND BAR DIA 40 MATL.STAINLESS STEEL Z10 CNF-18-09 OF JGINE WITH CERT IFICATE OF CONFORMITY ALT.MATL .STAINLESS STEEL 1B/B/2 OF VAL BRUNA STEEL WORK WITH CERTIFIC ATE OF CONFORMITY ALT.MATL.303 OF US STANDARD EQ.MATL.BS 303 S21.

H.F.CIRCUIT ASSEMBLY WITH SMD COMPONENTS FOR FUZE FB-40, AS PER TERMS&CONDITIONS MENTIONED IN ANNEXURE "A".

H.F.CIRCUIT ASSEMBLY WITH SMD COMPONENTS FOR FUZE FB-40, AS PER TERMS&CONDITIONS MENTIONED IN ANNEXURE "A".

SOLDER WIRE SN/PB 63/37 245 NO KESTER CLEAN,0.5 MM DIA.

SOLDER WIRE SN/PB 63/37 245 NO KESTER CLEAN,0.5 MM DIA.

Fabrication of Shorts Disposable

FABRICATION OF SHORTS DISPOSABLE. SWO PART II No. 60206. SPECIFICATION: 1) DIMENSION: AS PER SPECN NO. JSS : 8405-02. 2) MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Coat Drill White

FABRICATION OF COAT DRILL WHITE (SUIT DANGER BUILDING FOR A.F.KHADKI). SWO PART II No. 20209/70209. SPECIFICATION: NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Trousers Drill Cotton White (IFD)

FABRICATION OF TROUSER DRILL COTTON WHITE (IFD). SWO PART II No. 02395 (SIZE-3), 20172/70172. SPECIFICATION: NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Cap DB White Plain

FABRICATION OF CAPS DANGER BUILDING WHITE PLAIN. SPECIFICATION: SWO PART II No. 02360/20173/70173. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Dust Coat DB White

FABRICATION OF DUST COAT DANGER BUILDING WHITE. SWO PART II No. 20210/70210. SPECIFICATION: NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Trousers Drill Cotton Navy Blue

FABRICATION OF TROUSER DRILL COTTON NAVY BLUE FOR IFD. SWO PART II No. 20151/70151. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.