Name
Code
Quantity
Approx Value
Select
SPRING SAFETY SEAR TO DS CAT NO 1005 001698 TO DA NO 003 16 DATED 23 02 2016 FULL FINISHED CONDITION OUT OF FIRMS MATERIAL FOR RIFLE 7POINT62 MM ICR1282
Description
SPRING SAFETY SEAR TO DS CAT NO 1005-001698 TO DA NO 003/16 DATED: 23.02.2016 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1282)
Specification
AS PER DS CAT NO 1005-001698 TO DA NO 003/16 DATED: 23.02.2016 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1282)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
CARRIER BREECH BLOCK TO DS CAT NO 1005 001578 TO DC NO 26762 SA DATED 11 06 2015 FULL FINISHED CONDITION OUT OF FIRMS MATERIAL FOR RIFLE 7POINT62 MM ICR1268
Description
CARRIER BREECH BLOCK TO DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268)
Specification
AS PER DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SEAR TO DS CAT NO 1005 001680 TO DC NO 22786 SA DATED 02 01 1995 FOR RIFLE 7POINT 62MM ICR 1231 WHITE FINISHED CONDITION WITH FIRMS MATERIAL
Description
SEAR TO DS CAT NO 1005-001680 TO DC NO 22786-SA DATED 02.01.1995 FOR RIFLE 7.62MM (ICR-1231) (WHITE FINISHED CONDITION WITH FIRM'S MATERIAL)
Specification
AS PER DS CAT NO 1005-001680 TO DC NO 22786-SA DATED 02.01.1995 FOR RIFLE 7.62MM (ICR-1231) (WHITE FINISHED CONDITION WITH FIRM'S MATERIAL)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF PIN HINGE MOULDING TO D S CAT NO 5315 018168 D C NO 24629 SA DATED 02 02 2000 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1194
Description
SUPPLY OF PIN HINGE MOULDING TO D.S.CAT. NO. 5315 - 018168, D.C. NO.: 24629 - SA DATED: 02.02.2000 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL. ICR-1194
Specification
AS PER D.S.CAT. NO. 5315 - 018168, D.C. NO.: 24629 - SA DATED: 02.02.2000 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL. ICR-1194
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF EXTRACTOR TO D S CAT NO 1005 001571 D C NO 24891 SA DATED 05 12 2000 ICR 1262 FULLY FINISHED CONDITION WITH FIRM MATERIAL
Description
SUPPLY OF EXTRACTOR TO D.S.CAT. NO.: 1005-001571, D.C.NO.: 24891-SA, DATED" 05/12/2000 (ICR - 1262)(FULLY FINISHED CONDITION WITH FIRM MATERIAL)
Specification
AS PER D.S.CAT. NO.: 1005-001571, D.C.NO.: 24891-SA, DATED" 05/12/2000 (ICR - 1262)(FULLY FINISHED CONDITION WITH FIRM MATERIAL)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF STAY HAMMER TO DRG No TEND 2016 WITH FIRMS MATERIAL ICR1333
Description
SUPPLY OF STAY HAMMER TO DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333)
Specification
AS PER DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SUPPLY OF HOUSING HAMMER SPRING TO DS CAT NO 1005 001682 WITH DC NO 24979 SA DT 27 03 2001 IN FULLY FINISHED CONDITION ICR 1332
Description
SUPPLY OF HOUSING HAMMER SPRING TO DS CAT NO.1005-001682 WITH DC NO.24979-SA DT.27.03.2001 IN FULLY FINISHED CONDITION (ICR-1332)
Specification
AS PER DS CAT NO.1005-001682 WITH DC NO.24979-SA DT.27.03.2001 IN FULLY FINISHED CONDITION (ICR-1332)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
BUSH CYLINDER GAS TO D S CAT NO 3120 004656 ICR 1241 TO D C NO 23506 SA DATED 27 09 1996 FULLY FINISHED CONDITION WITH FIRMS MATERIAL
Description
BUSH CYLINDER GAS TO D.S. CAT. NO. 3120-004656 (ICR-1241)TO D.C. NO.23506-SA, DATED 27.09.1996 (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL)
Specification
AS PER D.S. CAT. NO. 3120-004656 (ICR-1241)TO D.C. NO.23506-SA, DATED 27.09.1996 (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL)
Drawing no.
D.S. CAT. NO. 3120-004656 (ICR-1241)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
TOOL REMOVING RUPTURED CASE 7POINT62 MM 1A GEN ARRANGEMENT TO D S CAT NO 4933 000215 DC NO 22657 SA DATED 27 8 94 CES ITEMS
Description
TOOL REMOVING RUPTURED CASE, 7.62 MM 1A. GEN. ARRANGEMENT TO D.S.CAT. NO.4933-000215 DC.NO.22657-SA.DATED 27.8.94 (CES ITEMS)
Specification
AS PER D.S.CAT. NO.4933-000215 DC.NO.22657-SA.DATED 27.8.94 (CES ITEMS)
Drawing no.
D.S.CAT. NO.4933-000215 DC.NO.22657-SA.DATED 27.8.94 (CES ITEMS)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
CLAMP OP ASSEMBLE EXTRACTOR TO DRG NO F 3871 BREECH BLOCK ASSEMBLY CES ITEMS
Description
CLAMP (OP: ASSEMBLE EXTRACTOR) TO DRG. NO. F-3871 (BREECH BLOCK ASSEMBLY) (CES ITEMS)
Specification
AS PER DRG. NO. F-3871
Drawing no.
DRG. NO. F-3871
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
TOOL COMBINATION 2A TO D S CAT NO 4933 000179 ARDE 986 CES ITEMS DC NO 23110 SA DATED 20 10 95 FOR DC No LATEST ISSUE TO BE FOLLOWED
Description
TOOL COMBINATION 2A TO D.S.CAT NO.4933-000179 (ARDE 986) (CES ITEMS) DC.NO.23110-SA DATED 20.10.95 FOR DC. No. LATEST ISSUE TO BE FOLLOWED.
Specification
AS PER D.S.CAT NO.4933-000179 (ARDE 986) (CES ITEMS) DC.NO.23110-SA DATED 20.10.95 FOR DC. No. LATEST ISSUE TO BE FOLLOWED.
Drawing no.
D.S.CAT NO.4933-000179 (ARDE 986) (CES ITEMS) DC.NO.23110-SA DATED 20.10.95
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
FILLER MAGAZINE 1A TO D S CAT No 1005 001738 D C No 17584 SA DATED 20 05 83 FOR RIFLE 7POINT62mm 1A1 FULLY FINISHED WITH FIRMS MATERIAL
Description
FILLER MAGAZINE, 1A TO D.S.CAT.No.:1005-001738 D.C.No. 17584-SA. DATED: 20/05/83. (FOR RIFLE 7.62mm 1A1) (FULLY FINISHED WITH FIRM'S MATERIAL
Specification
AS PER D.S.CAT.No.:1005-001738 D.C.No. 17584-SA. DATED: 20/05/83. (FOR RIFLE 7.62mm 1A1) (FULLY FINISHED WITH FIRM'S MATERIAL
Drawing no.
D.S.CAT.No.:1005-001738 D.C.No. 17584-SA. DATED: 20/05/83.
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
IC TO DRG NO TEND 255E FOR LOCATING PIECE ICR1505
Description
IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)
Specification
AS PER IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)
Drawing no.
DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
REGULATOR GAS TO ICR 1247 DRG NO TEND 1877STAR4
Description
REGULATOR GAS TO (ICR 1247) DRG.NO. TEND 1877*4
Specification
AS PER (ICR 1247) DRG.NO. TEND 1877*4
Drawing no.
(ICR 1247) DRG.NO. TEND 1877*4
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SPRING PLATFORM TO DS CAT NO 5360 007080 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL DA No 003 16 DATED 23 02 2016 ICR 1508
Description
SPRING PLATFORM TO DS. CAT. NO. 5360-007080 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL DA.No.003/16 DATED 23.02.2016 (ICR-1508)
Specification
AS PER DS. CAT. NO. 5360-007080 REQUIRED IN FULLY FINISHED CONDITION WITH FIRM MATERIAL DA.No.003/16 DATED 23.02.2016 (ICR-1508)
Drawing no.
DS. CAT. NO. 5360-007080 DA.No.003/16 DATED 23.02.2016 (ICR-1508)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
INVESTMENT CASTING TO DRG NO TEND 1805STAR2 FOR SLIDE COCKING HANDLE ICR 1290
Description
INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).
Specification
AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).
Drawing no.
DRG. NO. TEND 1805*2 (ICR-1290).
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
ROD COMPRESSING RETURN SPRING
Physical Verification needed
Description
ROD COMPRESSING RETURN SPRING D.S.CAT.No.1005-001581.
D.C.No.26761-SA.DATED:10.06.15. WITH FIRM'S MATERIAL.
(ICR 1271)
Specification
ROD COMPRESSING RETURN SPRING D.S.CAT.No.1005-001581.
D.C.No.26761-SA.DATED:10.06.15. WITH FIRM'S MATERIAL.
(ICR 1271)
Drawing no.
D.S.CAT.No.1005-001581. D.C.No.26761-SA.DATED:10.06.15. (ICR 1271)
Testing / Inspection Facility
70
5000
Number
BLOCK HOUSING. TO DRG.NO. TEND 1888 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) FOR (ICR 1302)
Description
BLOCK HOUSING. TO DRG.NO. TEND 1888 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) FOR (ICR 1302)
Specification
AS PER DRG.NO. TEND 1888 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) FOR (ICR 1302)
Drawing no.
DRG.NO. TEND 1888 (ICR 1302)
Testing / Inspection Facility
70
5000
Number
BLOCK BREECH ICR 1261 DS CAT NO 1005 001570 DC NO 25103 SA DT 23 08 2001 FULLY FINISHED CONDITION WITH FIRM MATERIAL
Description
BLOCK BREECH (ICR - 1261) DS CAT NO.1005-001570 DC NO.25103-SA DT.23.08.2001 (ASFULLY FINISHED CONDITION WITH FIRM MATERIAL)
Specification
AS PER (ICR - 1261) DS CAT NO.1005-001570 DC NO.25103-SA DT.23.08.2001 (ASFULLY FINISHED CONDITION WITH FIRM MATERIAL)
Drawing no.
(ICR - 1261) DS CAT NO.1005-001570 DC NO.25103-SA DT.23.08.2001
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
MFG. & SUPPLY OF ELIMINATOR FLASH NO.2 WHITE FINISHED BLANK TO DRG. NO. TEND 1692* (ICR 1576).
Description
MFG. & SUPPLY OF ELIMINATOR FLASH NO.2 WHITE FINISHED BLANK TO DRG. NO. TEND 1692* (ICR 1576).
Specification
AS PER DRG. NO. TEND 1692* (ICR 1576)
Drawing no.
DRG. NO. TEND 1692* (ICR 1576)
Testing / Inspection Facility
70
5000
Number
WASHER TUBE RECOIL TO D S CAT NO 5310 003174 DC NO 24283 SA DT 09 03 99 FOR DC NO LATEST ISSUE TO BE FOLLOWED FIRMS MATERIAL IN FULLY FINISHED CONDITION
Description
WASHER TUBE RECOIL TO D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99, FOR DC NO. LATEST ISSUE TO BE FOLLOWED.(FIRM'S MATERIAL IN FULLY FINISHED CONDITION)
Specification
AS PER D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99, FOR DC NO. LATEST ISSUE TO BE FOLLOWED.(FIRM'S MATERIAL IN FULLY FINISHED CONDITION)
Drawing no.
D.S. CAT NO.5310-003174,DC NO.24283-SA DT. 09-03-99,
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
RING RETAINING GAS REGULATOR TO D S CAT NO 5365 010326 WITH FIRM MATERIAL FULLY FINISHED CONDITION DC NO 24290 SA DT 16 3 99 FOR DC NO LATEST ISSUE TO BE FOLLOWED
Description
RING RETAINING GAS REGULATOR TO D.S. CAT NO.5365-010326 WITH FIRM MATERIAL FULLY FINISHED CONDITION DC.NO.24290-SA DT.16.3.99 FOR DC.NO.LATEST ISSUE TO BE FOLLOWED
Specification
AS PER DRG TO D.S. CAT NO.5365-010326 WITH FIRM MATERIAL FULLY FINISHED CONDITION DC.NO.24290-SA DT.16.3.99 FOR DC.NO.LATEST ISSUE TO BE FOLLOWED
Drawing no.
D.S. CAT NO.5365-010326
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
ROD, CLEANING, 7.62mm BARREL GAS CYLINDER 1A. D.S.CAT.No.: 1005-000358. D.C.No.: 23088-SA, DATED: 19/09/1995.
Description
ROD, CLEANING, 7.62mm BARREL GAS CYLINDER 1A. D.S.CAT.No.: 1005-000358. D.C.No.: 23088-SA, DATED: 19/09/1995.
Specification
AS PER D.S.CAT.No.: 1005-000358. D.C.No.: 23088-SA, DATED: 19/09/1995.
Drawing no.
D.S.CAT.No.: 1005-000358. D.C.No.: 23088-SA, DATED: 19/09/1995.
Testing / Inspection Facility
70
5000
Number
NUT LOCK FORESIGHT TO D S CAT No 5310 003169 D C No 24755 SA DATED 21 06 2000 FULLY FINISHED CONDITION WITH FIRMS MATERIAL
Description
NUT LOCK FORESIGHT TO D.S.CAT.No.: 5310-003169 D.C.No.: 24755-SA, DATED: 21/06/2000. FULLY FINISHED CONDITION WITH FIRM'S MATERIAL.
Specification
AS PER D.S.CAT.No.: 5310-003169 D.C.No.: 24755-SA, DATED: 21/06/2000. FULLY FINISHED CONDITION WITH FIRM'S MATERIAL.
Drawing no.
D.S.CAT.No.: 5310-003169 D.C.No.: 24755-SA, DATED: 21/06/2000 (ICR-1493)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
RIVET AXIS LOCKING PLATE D S CAT No 5320 001014 D C No 19657 SA DATED 26 06 1987 REQUIRED IN FULLY FINISHED CONDITION
Description
RIVET AXIS LOCKING PLATE D.S.CAT.No.: 5320-001014, D.C.No.:19657-SA, DATED:26/06/1987 (REQUIRED IN FULLY FINISHED CONDITION)
Specification
AS PER D.S.CAT.No.: 5320-001014, D.C.No.:19657-SA, DATED:26/06/1987 (REQUIRED IN FULLY FINISHED CONDITION)
Drawing no.
D.S.CAT.No.: 5320-001014, D.C.No.:19657-SA, DATED:26/06/1987
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
PLUG GAS CYLINDER ASSEMBLY AS PER DRG NO TEND 1905 ICR 66 SA FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQD FOR RIFLE 7POINT62MM 1A1
Description
PLUG GAS CYLINDER ASSEMBLY-AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1
Specification
AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1
Drawing no.
DRG. NO.TEND 1905 (ICR-66 SA)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
MANUFACTURING AND SUPPLY OF SCREW AXIS MAGAZINE CATCH TO D S CAT NO 5305 018183 D C NO 25762 SA DT 10 6 03 REQUIRED IN WHITE FINISHED CONDITION WITH FIRMS MATERIAL
Description
MANUFACTURING AND SUPPLY OF SCREW AXIS MAGAZINE CATCH TO D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03. (REQUIRED IN WHITE FINISHED CONDITION) WITH FIRMS MATERIAL
Specification
AS PER D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03. (REQUIRED IN WHITE FINISHED CONDITION) WITH FIRMS MATERIAL
Drawing no.
D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03.
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
MANUFACTURING AND SUPPLY OF PIN AXIS TRIGGER AND SEAR TO D S CAT NO 5315 009113 D C NO 25060 SA DT 05 7 01 WHITE FINISHED STAGE WITH FIRMS MATERIAL ICR 1220
Description
MANUFACTURING AND SUPPLY OF PIN AXIS TRIGGER AND SEAR TO D.S. CAT NO. 5315 - 009113 D.C. NO. 25060-SA DT. 05-7-01 (WHITE FINISHED STAGE) WITH FIRMS MATERIAL (ICR - 1220)
Specification
AS PER D.S. CAT NO. 5315 - 009113 D.C. NO. 25060-SA DT. 05-7-01 (WHITE FINISHED STAGE) WITH FIRMS MATERIAL (ICR - 1220)
Drawing no.
D.S. CAT NO. 5315 - 009113 D.C. NO. 25060-SA DT. 05-7-01 (ICR - 1220)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
MANUFACTURING AND SUPPLY OF SLEEVE PISTOL GRIP TO D S CAT NO 1005 001641 ARDE 657108 D C NO18530 SA DT 24 8 85 WITH FIRMS MATERIAL ICR 1257
Description
MANUFACTURING AND SUPPLY OF SLEEVE PISTOL GRIP TO D.S. CAT NO.1005-001641 (ARDE 657/108) D.C. NO.18530-SA DT. 24-8-85.(WITH FIRMS MATERIAL) ICR - 1257
Specification
AS PER D.S. CAT NO.1005-001641 (ARDE 657/108) D.C. NO.18530-SA DT. 24-8-85.(WITH FIRMS MATERIAL) ICR - 1257
Drawing no.
D.S. CAT NO.1005-001641 (ARDE 657/108) D.C. NO.18530-SA DT. 24-8-85.(WITH FIRMS MATERIAL) ICR - 1257
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
MFG AND SUPPLY OF PLUNGER LEVER CHANGE TO DS CAT NO 1005 001647 DC NO 19855 SA DT 1 12 87 REQUIRED IN WHITE FINISHED CONDITION WITH FIRMS MATERIAL ICR 1315
Description
MFG. & SUPPLY OF PLUNGER LEVER CHANGE TO DS CAT NO. 1005-001647 DC NO. 19855-SA DT. 1/12/87 REQUIRED IN WHITE FINISHED CONDITION. (WITH FIRMS MATERIAL) ICR - 1315
Specification
AS PER DS CAT NO. 1005-001647 DC NO. 19855-SA DT. 1/12/87 REQUIRED IN WHITE FINISHED CONDITION. (WITH FIRMS MATERIAL) ICR - 1315
Drawing no.
DS CAT NO. 1005-001647 DC NO. 19855-SA DT. 1/12/87 (ICR - 1315)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
WASHER POSITIONING FLASH ELIMINATOR TO TEND 1939STSR WHITE FINISHED BLANK REQUIRED FOR RIFLE 7POINT62 MM 1A1 ICR 1250 1577 1578 1579 AND 1580
Description
WASHER POSITIONING FLASH ELIMINATOR TO TEND:1939* WHITE FINI SHED BLANK. REQUIRED FOR RIFLE 7.62 MM 1A1 (ICR 1250, 1577, 1578, 1579 & 1580).
Specification
AS PER TEND:1939* WHITE FINI SHED BLANK. REQUIRED FOR RIFLE 7.62 MM 1A1 (ICR 1250, 1577, 1578, 1579 & 1580).
Drawing no.
TEND:1939* (ICR 1250, 1577, 1578, 1579 & 1580).
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
PLUNGER RETURN SPRING TO D S CAT NO 1005 001672 WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1228 DC NO 25140 SA DT 09 10 2001
Description
PLUNGER RETURN SPRING TO D.S. CAT NO.1005-001672 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1228) DC NO.25140-SA DT.09.10.2001
Specification
AS PER D.S. CAT NO.1005-001672 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1228) DC NO.25140-SA DT.09.10.2001
Drawing no.
D.S. CAT NO.1005-001672 (ICR 1228)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SCREW RETAINING LOCKING CATCH LEVER DS CAT NO 5305 005005 WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1222 DC NO 24223 SA DT 041298
Description
SCREW RETAINING LOCKING CATCH LEVER DS.CAT.NO.5305-005005 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1222) DC NO- 24223-SA DT. 04.12.98
Specification
AS PER DS.CAT.NO.5305-005005 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1222) DC NO- 24223-SA DT. 04.12.98
Drawing no.
DS.CAT.NO.5305-005005 (ICR 1222)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
PIN EJECTOR LOWER TO DS CAT NO 5315 001757 DC NO 25142 SA DT 10 10 01 FOR DC NO LATEST ISSUE TO BE FOLLOWED WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1327
Description
PIN,EJECTOR LOWER TO DS CAT NO. 5315-001757 DC NO.25142-SA DT.10/10/01 FOR DC NO. LATEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1327)
Specification
AS PER DS CAT NO. 5315-001757 DC NO.25142-SA DT.10/10/01 FOR DC NO. LATEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1327)
Drawing no.
DS CAT NO. 5315-001757 DC NO.25142-SA DT.10/10/01 (ICR-1327)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
PIN EJECTOR UPPER TO DS CAT NO 5315 001758 DC NO 25999 SA DT 20 10 04 FOR DC NO LATEST ISSUE TO BE FOLLOWED WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1326
Description
PIN EJECTOR UPPER TO DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)
Specification
AS PER DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)
Drawing no.
DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 (ICR-1326)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
PLUNGER TO D.S. CAT NO. 1005-001537 DC NO.22859-SA DT.09-02 -1995 FOR DC NO.LATEST ISSUE TO BE FOLLOWED ( WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1295)
Description
PLUNGER TO D.S. CAT NO. 1005-001537 DC NO.22859-SA DT.09-02 -1995 FOR DC NO.LATEST ISSUE TO BE FOLLOWED ( WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1295)
Specification
AS PER D.S. CAT NO. 1005-001537 DC NO.22859-SA DT.09-02 -1995 FOR DC NO.LATEST ISSUE TO BE FOLLOWED ( WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1295)
Drawing no.
D.S. CAT NO. 1005-001537 DC NO.22859-SA DT.09-02 -1995 (ICR-1295)
Testing / Inspection Facility
70
5000
Number
PIN AXIS ROD TO D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269)
Description
PIN AXIS ROD TO D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269)
Specification
AS PER D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269)
Drawing no.
D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 (ICR-1269)
Testing / Inspection Facility
70
5000
Number
SUPPLY OF SCREW RETURN SPRING TUBE TO DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL)
Description
SUPPLY OF SCREW RETURN SPRING TUBE TO DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL)
Specification
AS PER DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL)
Drawing no.
DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 (1CR-1230)
Testing / Inspection Facility
70
5000
Number
SUPPLY OF PLUNGER EXTRACTOR TO DS CAT NO 1005 001574 DC NO 26765 SA DATED 01 07 15 FOR DC No LATEST ISSUE TO BE FOLLOWED
Description
SUPPLY OF PLUNGER EXTRACTOR TO DS CAT NO.1005-001574 DC. NO. 26765-SA DATED 01.07.15 FOR DC. No LATEST ISSUE TO BE FOLLOWED
Specification
AS PER DS CAT NO.1005-001574 DC. NO. 26765-SA DATED 01.07.15 FOR DC. No LATEST ISSUE TO BE FOLLOWED
Drawing no.
DS CAT NO.1005-001574 DC. NO. 26765-SA DATED 01.07.15
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
PIN FIXING GAS CYLINDER TO D S CAT NO 5315 001760 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1245
Description
PIN FIXING GAS CYLINDER TO D.S CAT NO.5315-001760 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1245)
Specification
AS PER D.S CAT NO.5315-001760 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1245)
Drawing no.
D.S CAT NO.5315-001760 (ICR 1245)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
PIN COCKING HANDLE TO D S CAT NO 5315 009175 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1288 FOR DC NO LATEST ISSUE TO BE FOLLOWED
Description
PIN COCKING HANDLE TO D.S. CAT NO.5315-009175 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1288)FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.
Specification
AS PER D.S. CAT NO.5315-009175 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1288)FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.
Drawing no.
D.S. CAT NO.5315-009175 (ICR 1288)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SCREW ZEROING BACK SIGHT TO D S CAT NO 5305 018164 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1229
Description
SCREW ZEROING BACK SIGHT TO D.S. CAT NO.5305-018164 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1229)
Specification
AS PER D.S. CAT NO.5305-018164 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1229)
Drawing no.
D.S. CAT NO.5305-018164 (ICR 1229)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
FERRULE BUTT TO D S CAT NO 1005 001613 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1207
Description
FERRULE BUTT TO D.S. CAT NO.1005-001613 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1207)
Specification
AS PER D.S. CAT NO.1005-001613 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1207)
Drawing no.
D.S. CAT NO.1005-001613 (ICR 1207)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number
SCREW FRONT SLING LOOP TO D S CAT NO 5305 004999 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1206
Description
SCREW FRONT SLING LOOP TO D.S. CAT NO.5305-004999 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1206)
Specification
AS PER D.S. CAT NO.5305-004999 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1206)
Drawing no.
D.S. CAT NO.5305-004999 (ICR 1206)
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
5000
Number