OFB Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

32801

RFI/OTE/ATH0820227/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG Description MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG Specification MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG Drawing no. RFI SK 9609 MAGAZINE_TUBE_WITH_PLUG_FOR_TRADE.pdf Manufacturing Technology Testing / Inspection Facility	70	5467 Number

32802

MPV 09

Vehicle Factory Jabalpur

The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009

Name	Code	Quantity	Approx Value	Select
Jackal Armour Plate 6MM, A-Category Description JACKAL ARMOUR PLATE (A-CATEGORY), SIZE: 6 x 1800 x 6000 MM, HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALANT FOR PROTECTION AGAINST FIRE FROM 7.62 SLR FROM A DISTANCE OF 10 MTRS AS PER R&D SPECIFICATION 52/01D/97-DD(W)-01(REV). Specification JACKAL ARMOUR PLATE (A-CATEGORY), SIZE: 6 x 1800 x 6000 MM, HIGH HARDNESS TO 477-530 BHN, SPECN: CQA(M)-47 OR EQUIVALANT FOR PROTECTION AGAINST FIRE FROM 7.62 SLR FROM A DISTANCE OF 10 MTRS AS PER R&D SPECIFICATION 52/01D/97-DD(W)-01(REV). Annex-C-_Mat_specn__Rolled_and_Heat_treated_Jackal_Plates.pdf Annexure-D-Specn__no_52-01-97-DD-01_(Revised_1)_net_2016-12-28_05-38-33.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	90	42449 Kilogram

32803

133MMETT17004606

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
TORCH HAND JANATA 300 TL TYPE Description TORCH JANATA 300 TL TYPE Specification CQAL 4474 Drawing no. CQAL 4474 CQAL_4474.pdf Manufacturing Technology Testing / Inspection Facility	94	155 Number

32804

RFI/OTE/ATH0820226/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUNTO RFI DRG.NO. PAG-0070.[MAT.- NYLON-66 TO SPECN.DEF,STD 93-8/1][COLOUR- BLACK & LIGHT MATT FINISH] Description STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUNTO RFI DRG.NO. PAG-0070.[MAT.- NYLON-66 TO SPECN.DEF,STD 93-8/1][COLOUR- BLACK & LIGHT MATT FINISH] Specification STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUNTO RFI DRG.NO. PAG-0070.[MAT.- NYLON-66 TO SPECN.DEF,STD 93-8/1][COLOUR- BLACK & LIGHT MATT FINISH] Drawing no. PAG-0070 STOCK_BUTT.pdf Manufacturing Technology Testing / Inspection Facility	70	6143 Number

32805

RFI/OTE/ATH0120064/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
SEMI FINISH BLANK OF HAMMER FOR RIFLE 5.56MM INSAS. Description SEMI FINISH BLANK OF HAMMER FOR RIFLE 5.56MM INSAS. RFI SK NO.64524-S Specification MATERIAL BS 970 PT I:1983-655 M-13 En-36B Drawing no. RFI SK NO.64524-S semifinish_blank11232017.pdf Manufacturing Technology Testing / Inspection Facility	70	8698 Number

32806

RFI/OTE/ATH0820072/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
INVESTMENT CASTING OF TRIGGER FOR 12 BORE PAG Description INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG Specification INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG, MATERIAL- BS:3146 PART I 1974 CLASS 5 GRADE A Drawing no. RFI SK 9100 IC_TRIGGER.pdf Manufacturing Technology Testing / Inspection Facility	70	4927 Number

32807

RFI/OTE/H/060/072/083/102/125/139/164/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
PICATINY RAIL TOP INVESTMENT CASTING FOR RIFLE 5.56MM EXCALIBUR. Description PICATINY RAIL TOP INVESTMENT CASTING FOR RIFLE 5.56MM EXCALIBUR, DRG. NO. RFI SK. 7626/S Specification MATERIAL IS:10343-1989 GRADE-28 ALT. MAT. BS 1346 : 1974 PART1 CLASS2 Drawing no. DRG. NO. RFI SK. 7626/S Picatiny_Rail_Top_Drawing.pdf Manufacturing Technology Testing / Inspection Facility	70	3244 Number

32808

ORDFYS/OFT/DAVP/17-18/MMR/E-PROC/7.62/OTE/05

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity
IC TO DRG.NO.:TEND.920 D FOR TRIGGER. Description IC TO DRG.NO.:TEND.920 D FOR TRIGGER.(ICR-1238) Specification AS PER DRG No.TEND 920D ICR -1238 Drawing no. TEND 920D 18__(ICR_1238)_1005-001690_TRIGGER.pdf Manufacturing Technology Testing / Inspection Facility	70	3500 Number
I/C FOR TRIGGER Description INVESTMENT CASTING FOR TRIGGER AS PER RFI SK.36513 Specification INVESTMENT CASTING FOR TRIGGER AS PER RFI SK.36513 Drawing no. RFI SK.3651*3 Manufacturing Technology Testing / Inspection Facility	70	6684 Number
I/C BRACKET FORE SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK) Description I/C BRACKET FORE SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK)DRG. NO. RFI SK-9919AR Specification I/C BRACKET FORE SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK)DRG. NO. RFI SK-9919AR Drawing no. RFI SK-9919AR Manufacturing Technology Testing / Inspection Facility	70	3947 Number
I/C CATCH SAFETY Description INVESTMENT CASTING FOR CATCH SAFETY TO RFI.SK.NO. 35713FOR PISTOL AUTO 9MM 1A Specification INVESTMENT CASTING FOR CATCH SAFETY TO RFI.SK.NO. 35713FOR PISTOL AUTO 9MM 1A Drawing no. RFI.SK.NO. 3571*3 Manufacturing Technology Testing / Inspection Facility	70	12727 Number
I.C. PIN ARM Description INVESTMENT CASTING FOR PIN ARM TO RFI SK.NO.35683(DC-02/02/13).FOR PISTOL AUTO 9MM 1A. Specification INVESTMENT CASTING FOR PIN ARM TO RFI SK.NO.35683(DC-02/02/13).FOR PISTOL AUTO 9MM 1A. Drawing no. RFI SK.NO.3568*3(DC-02/02/13) Manufacturing Technology Testing / Inspection Facility	70	9492 Number
INVESTMENT CASTING OF TRIGGER FOR 12 BORE PAG Description INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG Specification INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG, MATERIAL- BS:3146 PART I 1974 CLASS 5 GRADE A Drawing no. RFI SK 9100 Manufacturing Technology Testing / Inspection Facility	70	4927 Number
I.C. OF CONNECTOR BUTT EXR OF RIFLE 5.56 MM EXCALIBUR MK.1 Description I.C. OF CONNECTOR BUTT EXR OF RIFLE 5.56 MM EXCALIBUR MK.1 Specification I.C. OF CONNECTOR BUTT EXR OF RIFLE 5.56 MM EXCALIBUR MK.1 TO RFI SK. NO. 7596 Drawing no. RFI SK. NO. 7596 Manufacturing Technology Testing / Inspection Facility	70	2591 Number

32809

3173000600

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN* Description BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN* Specification BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN* Drawing no. DRG. NO. SK-5579R-AN* DRG_SK_5579R_barrel_blank_revolver_Anmol.pdf Manufacturing Technology Testing / Inspection Facility	70	551 Number

32810

3173000599

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) Description CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) Specification DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) Drawing no. DRG_PH_1_5_catch_barrel_revolver.pdf Manufacturing Technology Testing / Inspection Facility	70	7304 Number

32811

EOI/03/Polyethene

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
POLYTHENE FILM OF DIFFERENT THICKNESS & DIMENSIONS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	as per requirement Metre
POLYTHENE BAG OF SELF SEALING TAPE OF DIFFERENT DIMENSIONS Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	as per requirment Number

32812

EOI/30/SELF ADHESIVE TAPE

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity
SELF ADHESIVE CELLOPHONE PVC TAPE, 63 MM WIDE Description SELF ADHESIVE CELLOPHONE PVC TAPE, 63 MM WIDE Specification AS PER REQUIREMENT AND SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Metre
SELF ADHESIVE STICKER ON PVC SHEET FOR PVC SHEET FOR SELING OF INDIVIDUAL Description AS PER SPECIFICATION Specification AS PER SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Metre
SELF ADHESIVE MASKING TAPE 25 MM WIDTH FOR INSIDE Description AS PER SPECIFICATION Specification AS PER SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Metre
SELF ADHESIVE CELLOPHONE PVC TAPE 25 MM WIDE (WITH DULY PRINTED) Description AS PER SPECIFICATION Specification AS PER SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Metre
SELF ADHESIVE CELLOPHONE PVC TAPE 75 MM WIDE. Description SELF ADHESIVE CELLOPHONE PVC TAPE 75 MM WIDE. Specification DMSRDE/TAGS/88/333/(c) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Metre
SELF ADHESIVE CELLOPHONE PVC TAPE 50MM WIDE Description SELF ADHESIVE CELLOPHONE PVC TAPE 50MM WIDE Specification DMSRDE/T&GS/88/333/(C) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Metre

32813

EOI/29/Textile items

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity
CLOTH COTTON DOSSUTI BLUE 91 CMS Description IS: 179-1977 VARIETY NO. 4 Specification IS: 179-1977 VARIETY NO. 4 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	as per requirement Metre
FABRICATION OF POUCHES AMMUNITION (MODIFIED) Description FABRICATION OF POUCHES AMMUNITION (MODIFIED) Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	as per requirement Number
FABRICATION OF PACK WITH ALUMINIUM FRAME (MODIFIED) Description AS PER REQUIREMENT & SPECIFICATIONÃ‚Â Specification AS PER REQUIREMENT & SPECIFICATIONÃ‚Â Drawing no. Manufacturing Technology Testing / Inspection Facility	21	as per requirement Number
TRADE FABRICATION OF BAG KIT UNIVERSAL (MARK-2) Description TRADE FABRICATION OF BAG KIT UNIVERSAL (MARK-2) Specification S/2532/BAG KIT UNIVERSAL(OG)/TC-6 (a) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	as per requirement Number
PVC COATED FR TREATED GREY COLOUR POLYESTER FABRIC 360 GSM 91 CMS Description PVC COATED FR TREATED GREY COLOUR POLYESTER FABRIC 360 GSM 91 CMS Specification AS PER APPENDIX "B" ATTACHED TO PROV. SPECN. S/6252/A/TC-6 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	as per requirement Metric tonne(1000kg)
FABRIC 410 GMS OG WP P.V. DOPE DYED RIP STOP 148 CMS Description PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) Specification PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	as per requirement Metre
BLACK MESH LINING OF 200 GSM WITH ANTIBACTERIAL TREATMENT, WIDTH -150CMS MIN. Description BLACK MESH LINING OF 200 GSM WITH ANTIBACTERIAL TREATMENT, WIDTH -150CMS MIN. Specification IND/TC/3847(A),AS per terms & condition enclosed. NOTE: SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY. Drawing no. Manufacturing Technology Testing / Inspection Facility	21	as per requirement Metre
FABRIC NYLON PU COATED BLACK GSM 250 WIDTH 172CM Description FABRIC NYLON PU COATED BLACK GSM-250 WIDTH- 172CM Specification IND/TC/0155, and Appendix ‘A’ of specification IND/TC/3847(A) Drawing no. Manufacturing Technology As per Specification Item_with_Specification_1.pdf Testing / Inspection Facility As per Specification Item_with_Specification_1.pdf	21	as per requirement Metre
TRADE FABRICATION OF FOLDABLE MULTIPURPOSE UTILITY BIN FOR 4M/2M Description TRADE FABRICATION OF FOLDABLE MULTIPURPOSE UTILITY BIN FOR 4M/2M Specification AS PER SPEC Drawing no. Manufacturing Technology Testing / Inspection Facility	21	as per requirement Number
PVC COATED FR TREATED GREY COLOUR POLYESTER FABRIC 360 GSM 91 CMS Description PVC COATED FR TREATED GREY COLOUR POLYESTER FABRIC 360 GSM 91 CMS Specification AS PER APPENDIX "B" ATTACHED TO PROV. SPECN. S/6252/A/TC-6 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	as per requirement Metric tonne(1000kg)

32814

V000417117

Ordnance Factory Medak

The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205

Name	Code	Quantity	Approx Value	Select
HAND RAIL 678-71-CD101 Description HAND RAIL 678-71-CD101 Specification HAND RAIL 678-71-CD101 GOST_2685_75.pdf Drawing no. 678_71_Sb101.pdf Manufacturing Technology Testing / Inspection Facility	71	561 Number

32815

OLF/MM-2/T-1706011727

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
PUTTY 220T LF 9927091205 Description PUTTY 220T Specification AS PER SPECIFICATION NO. OST3-5605-91 Drawing no. Manufacturing Technology FIRM NEEDS TO UPLOAD THEIR MANUFACTURING FACILITIES DETAILS FOR THE PRODUCTION OF SUBJECT ITEM manufacturing_technology_files.docx Testing / Inspection Facility FIRM NEEDS TO UPLOAD THEIR TESTING /INSPECTION FACILITIES DETAILS FOR THE PRODUCTION OF SUBJECT ITEM testing_inspection_file.docx	99	19 Kilogram
PUTTY 45 M (LF-9927089692) Description PUTTY 45 M Specification AS PER SPECIFICATION NO. OST3-5605-91 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	27 Kilogram
PUTTY-135P (LF-9927084768) Description PUTTY-135P Specification AS PER SPECIFICATION NO. OST3-5605-91 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	8 Kilogram
GREEN PUTTY 50M (LF-7440201176) Description GREEN PUTTY 50M Specification AS PER SPECIFICATION NO. OST3-5605-91 Drawing no. Manufacturing Technology Testing / Inspection Facility	74	23 Kilogram
SEALANT VGO 1 LF 7440200344 Description SEALANT VGO-1 (LF-7440200344) Specification AS PER SPEC NO. OST 3803238-81 Drawing no. Manufacturing Technology CHEMICAL ITEM CHEMICAL ITEM manufacturing_technology_files.docx Testing / Inspection Facility CHEMICAL ITEM testing_inspection_file.docx	74	60 Kilogram

32816

OLF/MM-2/T-1706011728

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
TI WINDOW FOR DTI OF T-90 TANK (LF-2690000177) Description TI WINDOW FOR DTI OF T-90 TANK (LF-2690000177) Specification AS PER DRAWING NO.138100000201 G12 Drawing no. Manufacturing Technology Testing / Inspection Facility	26	10 Number

32817

OLF/MM-2/T-1706011734

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
LASER ROD (FINISHED) (LF-7420100019) Description LASER ROD (FINISHED) (LF-7420100019) Specification AS PER DRAWING NO. BL7207003 Drawing no. Manufacturing Technology Testing / Inspection Facility	74	80 Number

32818

ORDFYS/OCFAV/DAVP/17-18/PV/03/28, Date: 23.11.2017

Ordnance Clothing Factory Avadi

The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054

Name	Code	Quantity
PLASTIC SLIDE FASTENER MEDIUM SPECIAL DUTY CLOSED END TYPE-E WITH TWO AUTO LOCK SLIDERS VARIOUS SIZES & Shades Description PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY SAGE GREEN IN VARIOUS SIZES Specification IS:14181-PART 1 TO 3 :2002 (REAFFIRMED 2008 WITH ALL AMENDMENTS) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	4,400 Nos. in 67CM, 9,100 Nos. in 73 CM, 6950 Nos. in 73 CM and 2950 Nos. in 84 CM. Number
SEWING THREAD SPUN POLYESTER 125 D / TEX 3 Ply Description IND/TC/0296 (b) Specification IND/TC/0296 (b) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	138500 km (In Tubes of 1000 Mtrs each) and 67300 km (In Cones of 5000 Mts. each) Kilometer(km)
Corrugated Fibre Board 5 Ply Box 420X330X375mm. Description As per the Specification IS: 2771 (Part 1) : 1990 with all amendments except that Water Proofing not required. Specification As per the Specification Drawing no. Manufacturing Technology Testing / Inspection Facility	21	52,675 Nos. Number

32819

OLF/MM-2/T-1706011725/2017

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
MFR 15 K, 1%, 0.25W, 50PPM (LF 9001120407) Description MFR 15 K, 1%, 0.25W, 50PPM (LF 9001120407) Specification MFR 15 K, 1%, 0.25W, 50PPM (LF 9001120407) Drawing no. Manufacturing Technology Testing / Inspection Facility	90	200 Number
MFR 10 OHM 1 % 0.25 W 50 PPM (L.F.NO.9927096096) Description METAL FILM RESISTOR 10 OHM +/- 1%,0.25 W 50 PPMJSS 50401 Specification METAL FILM RESISTOR 10 OHM +/- 1%,0.25 W 50 PPMJSS 50401 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	2500 Number
MFR 1.8 KOHM+/-1%, 0.25W 50PPM (LF 9927074625) Description MFR 1.8 KOHM+/-1%, 0.25W 50PPM (LF 9927074625) Specification MFR 1.8 KOHM+/-1%, 0.25W 50PPM (LF 9927074625) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	400 Number
MFR 025W, 1.82 KOHM+/-1%,50PPM (LF 7441120488) Description MFR 025W, 1.82 KOHM+/-1%,50PPM (LF 7441120488) Specification MFR 025W, 1.82 KOHM+/-1%,50PPM (LF 7441120488) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	100 Number
RESISTOR S2-36-365 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121977) Description RESISTOR S2-36-365 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121977) Specification RESISTOR S2-36-365 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121977) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	272 Number
RESISTOR S2-36-365 OHM+/-0.5% OZHO.467.089 TY (LF 7441121976) Description RESISTOR S2-36-365 OHM+/-0.5% OZHO.467.089 TY (LF 7441121976) Specification RESISTOR S2-36-365 OHM+/-0.5% OZHO.467.089 TY (LF 7441121976) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	136 Number
RESISTOR S2-36-36.5 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121975) Description RESISTOR S2-36-36.5 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121975) Specification RESISTOR S2-36-36.5 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121975) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	136 Number
RESISTOR S2-36-32 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121974) Description RESISTOR S2-36-32 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121974) Specification RESISTOR S2-36-32 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121974) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	272 Number
RESISTOR S2-36-30.1 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121973) Description RESISTOR S2-36-30.1 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121973) Specification RESISTOR S2-36-30.1 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121973) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	408 Number
RESISTOR S2-36-30.1 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121972) Description RESISTOR S2-36-30.1 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121972) Specification RESISTOR S2-36-30.1 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121972) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	272 Number
RESISTOR S2-36-3.32 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121971) Description RESISTOR S2-36-3.32 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121971) Specification RESISTOR S2-36-3.32 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121971) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	136 Number
RESISTOR S2-36-3.01 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121970) Description RESISTOR S2-36-3.01 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121970) Specification RESISTOR S2-36-3.01 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121970) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	272 Number
RESISTOR S2-36-27.1 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121969) Description RESISTOR S2-36-27.1 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121969) Specification RESISTOR S2-36-27.1 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121969) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	136 Number
REGISTOR S2-36-243 KOHM +/-.1% OZHO.467.089 TY (LF 7441121968) Description REGISTOR S2-36-243 KOHM +/-.1% OZHO.467.089 TY (LF 7441121968) Specification REGISTOR S2-36-243 KOHM +/-.1% OZHO.467.089 TY (LF 7441121968) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	136 Number
REGISTOR S2-36-221 OHM +/-.5% A OZHO.467.089 TY (LF 7441121967) Description REGISTOR S2-36-221 OHM +/-.5% A OZHO.467.089 TY (LF 7441121967) Specification REGISTOR S2-36-221 OHM +/-.5% A OZHO.467.089 TY (LF 7441121967) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	136 Number
REGISTOR S2-36-2 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121966) Description REGISTOR S2-36-2 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121966) Specification REGISTOR S2-36-2 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121966) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	272 Number
REGISTOR S2-36-18.7 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121965) Description REGISTOR S2-36-18.7 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121965) Specification REGISTOR S2-36-18.7 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121965) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	544 Number
REGISTOR S2-36-18.4 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121964) Description REGISTOR S2-36-18.4 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121964) Specification REGISTOR S2-36-18.4 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121964) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	272 Number
REGISTOR S2-36-162 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121963) Description REGISTOR S2-36-162 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121963) Specification REGISTOR S2-36-162 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121963) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	408 Number
MFR 025W, 56.2 OHM+/-1%,50PPM (LF 7441120485) Description MFR 025W, 56.2 OHM+/-1%,50PPM (LF 7441120485) Specification MFR 025W, 56.2 OHM+/-1%,50PPM (LF 7441120485) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	400 Number

32820

3173000596

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
CHEST FOR 9 MM CARBINE Description AS PER DRAWING DS CAT NO 1005-00966 Specification AS PER DRAWING DS CAT NO 1005-00966 DC (I) NO 25859 SA DT 10.09.03 Drawing no. Drg_1005-000966_Chest_Carbine_9_MM.pdf Manufacturing Technology Testing / Inspection Facility	14	179 Number

32821

3173000595

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
PIN ICR 1188 FOR MAGAZINE 9MM DS CAT NO.1005-000980 DC(I)NO.25691-SA DATED 03.03.2003. Description PIN ICR 1188 FOR MAGAZINE 9MM DS CAT NO.1005-000980 DC(I)NO.25691-SA DATED 03.03.2003. Specification PIN ICR 1188 FOR MAGAZINE 9MM DS CAT NO.1005-000980 DC(I)NO.25691-SA DATED 03.03.2003. Drawing no. DS CAT NO.1005-000980 DRG_1005_000980_Pin_ICR_1188.pdf Manufacturing Technology Testing / Inspection Facility	70	14695 Number

32822

3173000594

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION Description DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681 SA DT 11.02.03 Specification CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681 SA DT 11.02.03 Drawing no. Drg_1005_000970_to_0975_Case_Assy.pdf Manufacturing Technology Testing / Inspection Facility	70	8045 Number

32823

3173000593

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 Description ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 Specification ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 Drawing no. .S.CAT NO.1005-000983 DRG_1005_000983_Roller_ICR_1189.pdf Manufacturing Technology Testing / Inspection Facility	70	14693 Number

32824

3173000592

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. Description EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. Specification EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. Drawing no. DS CAT NO-1005-000893 DRG_1005_000893_Ejector.pdf Manufacturing Technology Testing / Inspection Facility	70	1698 Number

32825

6112/20170030_O/PV/P

Ordnance Factory Bhusawal

The General Manager,
Bhusawal
Bhusawal
Maharashtra
425203

Name	Code	Quantity	Approx Value	Select
ARC WELDING ELECTRODE Description ARC WELDING ELECTRODE - ER 4211X AS PER IS:814-2004 AWS/A5.1 E-6013 CURRENT CONDITION, IS CLASSIFICATION IS:814:2004 WITH CURRRENT CONDITION USE AS AC50 OR DC +/-AMP DIA :-3.15 (+/- 0.05)MM,LENGHT :-450.0(+/- 6.0)MM WITH MEDIUM COATING UPTO 1.55MM,WITH BARE LENGHT 15MM TO 30MM. Specification ARC WELDING ELECTRODE - ER 4211X AS PER IS:814-2004 AWS/A5.1 E-6013 CURRENT CONDITION, IS CLASSIFICATION IS:814:2004 WITH CURRRENT CONDITION USE AS AC50 OR DC +/-AMP DIA :-3.15 (+/- 0.05)MM,LENGHT :-450.0(+/- 6.0)MM WITH MEDIUM COATING UPTO 1.55MM,WITH BARE LENGHT 15MM TO 30MM. Drawing no. Manufacturing Technology Testing / Inspection Facility	99	441718.00 Number

32826

RFI/OTE/ATH1720228/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
RFI SK-9119-GG, SINGLE WEAPON PACKING FOR TEAR GAS GUN Description RFI SK-9119-GG, SINGLE WEAPON PACKING FOR TEAR GAS GUN Specification RFI SK-9119-GG, SINGLE WEAPON PACKING FOR TEAR GAS GUN Drawing no. RFI SK-9119-GG SINGLE_WEAPON_PACKING_BOX.pdf Manufacturing Technology Testing / Inspection Facility	70	3738 Number

32827

RFI/OTE/ATH0820225/2017

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
INVESTMENT CASTING OF TRIGGER FOR 12 BORE PAG Description INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG Specification INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG, MATERIAL- BS:3146 PART I 1974 CLASS 5 GRADE A Drawing no. RFI SK 9100 IC_TRIGGER.pdf Manufacturing Technology Testing / Inspection Facility	70	7739 Number

32828

20170439/PV/0997/EOTF

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
S M Wire Bright Drawn Half Hard 4 mm dia Description S M Wire Bright Drawn Half Hard 4 mm dia Specification IS: 280 LATEST HALF HARD Drawing no. Manufacturing Technology Testing / Inspection Facility	21	5786.00 Kilogram

32829

OFBH/2017/SECOND/0001

Ordnance Factory Bhusawal

The General Manager,
Bhusawal
Bhusawal
Maharashtra
425203

Name	Code	Quantity
WEBBING COTTON SIZE 3.00X25MM. Description WEBBING COTTON BAND 3.00 MM THICK X 25 MM WIDTH SUITABLE MOULD PROOFED DYED OLIVE GREEN ( ISC-220 OF IS-5-78 ) TO SPECN: JSS-8305-18-93 DC NO.3176 ME DATED 12TH AUGUST 94. NOTE:-TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LABORATORIES FOR CONFORMING THE MATERIAL AS PER-F.O.R. OFBH,BHUSAWAL Specification WEBBING COTTON BAND 3.00 MM THICK X 25 MM WIDTH SUITABLE MOULD PROOFED DYED OLIVE GREEN ( ISC-220 OF IS-5-78 ) TO SPECN: JSS-8305-18-93 DC NO.3176 ME DATED 12TH AUGUST 94. NOTE:-TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LABORATORIES FOR CONFORMING THE MATERIAL AS PER-F.O.R. OFBH,BHUSAWAL Drawing no. Open_Advt_of_July_2017_.pdf Manufacturing Technology Testing / Inspection Facility	99	48000 Metre
WEBBING COTTON O.G.2.5MM THICK Description WEBBING COTTON BAND 2.5 MM +/- 0.25 MM THICK X 25.4 MM +/- 1.3 MM WIDTH DYED OLIVE GREEN (ISC-220 OF IS-5-1994 AMMENDMENT NO.1 FOURTH REVISION) SUITABLE MOULD PROOFED TO SPECN :"JSS-8305-18-1993" "DC NO.3176-ME DATED 12.08.1994" NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB.-F.O.R. OFBH,BHUSAWAL Specification WEBBING COTTON BAND 2.5 MM +/- 0.25 MM THICK X 25.4 MM +/- 1.3 MM WIDTH DYED OLIVE GREEN (ISC-220 OF IS-5-1994 AMMENDMENT NO.1 FOURTH REVISION) SUITABLE MOULD PROOFED TO SPECN :"JSS-8305-18-1993" "DC NO.3176-ME DATED 12.08.1994" NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB.-F.O.R. OFBH,BHUSAWAL Drawing no. Open_Advt_of_July_2017_.pdf Manufacturing Technology Testing / Inspection Facility	21	87500 Metre
GASKET RUBBER FOR BOX H2A Description DRG.NO.OFB/SK/712 Specification GASKET RUBBER FOR BOX H2A OF VULCANISED NATURAL RUBBER CLASS A TO SPECN.IND/ME/584(F) AS PER DRG.NO.CIA/AMMN/2389 PT.NO. ISV 1727 DC 35607-A (OFB DRG.NO.OFB/SK/712), COLOUR - BLACK NOTE:- THE FIRM SHALL GET SAMPLE APPROVED BEFORE GOING TO MANUFACTURING OF BULK ALONGWITH CONFIRMATION OF-F.O.R. OFBH,BHUSAWAL Drawing no. DRG.NO.OFB/SK/712 Open_Advt_of_July_2017_.pdf Manufacturing Technology Testing / Inspection Facility	99	252000 Number
CAPCELL WITH ADHENSIVE 90 X 60 X 45 Description CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 90X 60 X 45 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL Specification CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 90 X 60 X 45 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL Drawing no. Open_Advt_of_July_2017_.pdf Manufacturing Technology Testing / Inspection Facility	99	9000 Number
CAPCELL WITH ADHENSIVE 90 X 60 X 35 Description CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 90 X 60 X 35 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL Specification CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 90 X 60 X 35 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL Drawing no. Open_Advt_of_July_2017_.pdf Manufacturing Technology Testing / Inspection Facility	99	15000 Number
CAPCELL WITH ADHENSIVE 80 X 60 X30 Description CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 80 X 60 X 30 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL Specification CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 80 X 60 X 30 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL Drawing no. Open_Advt_of_July_2017_.pdf Manufacturing Technology Testing / Inspection Facility	99	7500 Number

Proceed